PSPaul Seidler

Paul Seidler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paul Seidler has a total of 71 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bidirectional Microwave-Optical Conversion with an Integrated Soft-Ferroelectric Barium Titanate Transducer

    by Charles Möhl, Annina Riedhauser, Max Glantschnig, Daniele Caimi, Ute Drechsler, Antonis Olziersky, Deividas Sabonis, David I. Indolese, Thomas M. Karg, Paul Seidler

    Efficient, low-noise, and high-bandwidth transduction between optical and microwave photons is key to long-range quantum communication between distant superconducting quantum processors. Recent demonstrations of microwave-optical transduction using the broadband direct electro-optic (Pockels) effect in optical thin films made of AlN or LiNbO 3 have shown promise. To improve efficiency and added noise, materials with larger Pockels coefficients, such as the soft ferroelectrics BaTiO 3 or SrTiO 3 , are needed. However, these materials require adapted designs and fabrication approaches due to their nonlinear and, in some cases, hysteretic electro-optic response. Here, we engineer an on-chip, triply resonant transducer comprising low-loss BaTiO 3 -on- SiO 2 waveguides monolithically integrated with a superconducting microwave resonator made of Nb. We demonstrate bidirectional microwave-optical transduction and reach total off-chip efficiencies of 1 × 10 − 6 using pulsed pumping. The device design permits poling of the ferroelectric material without introducing excess microwave loss, exploiting superconducting air bridges fabricated using only subtractive patterning steps. In addition, we investigate optically induced heating, revealing fast thermalization and quasiparticle resilience of the microwave resonator. Our transducer concept and fabrication process are applicable to other materials with a large bias-induced Pockels effect like SrTiO 3 and pave the way for efficient, low-power quantum interconnects.


  • Top Cited Papers
    Open Access

    An ultra-broadband photonic-chip-based parametric amplifier

    by Nikolai Kuznetsov, Alberto Nardi, Johann Riemensberger, Alisa Davydova, Mikhail Churaev, Paul Seidler, Tobias J. Kippenberg

    Optical amplification, crucial for modern communication, primarily relies on erbium-doped fibre amplifiers (EDFAs)1,2. Yet, EDFAs only cover a portion of the low-loss spectrum of optical fibres. This has motivated the development of amplifiers operating beyond the erbium gain window. Pioneering work on optical parametric amplifiers (OPAs)3,4 using intrinsic third-order optical nonlinearity has led to demonstrations of increased channel capacity. OPAs offer high gain, can reach the 3-dB quantum limit for phase-preserving amplifiers and exhibit unidirectional operation. However, power requirements for highly nonlinear fibres3,5–8 or bulk waveguides9,10 have impeded their adoption. By contrast, OPAs based on integrated photonic circuits offer the advantages of substantially increased mode confinement and optical nonlinearity but have been limited in bandwidth11,12. We overcome this challenge by using low-loss gallium phosphide-on-silicon dioxide13–15 photonic integrated circuits (PICs) and attain up to 35 dB of parametric gain with waveguides only a few centimetres long in a compact footprint of 0.25 square millimetres. Fibre-to-fibre net gain exceeding 10 dB across an ultra-broad bandwidth of approximately 140 nm (that is, 17 THz) is achieved, with a threefold increase in the gain window compared with C-band EDFAs. We further demonstrate a high dynamic range for input signals, spanning six orders of magnitude, while maintaining a low noise figure. We exploit these performance characteristics to amplify coherent communication signals. This marks, to our knowledge, the first ultra-broadband, high-gain, continuous-wave amplification in a photonic chip, opening up new capabilities for next-generation integrated photonics.


  • Open Access

    Absorption loss and Kerr nonlinearity in barium titanate waveguides

    by Annina Riedhauser, Charles Möhl, Johannes Schading, Daniele Caimi, David I. Indolese, Thomas M. Karg, Paul Seidler

    Because of its exceptionally large Pockels coefficient, barium titanate (BaTiO$_3$) is a promising material for various photonic applications at both room and cryogenic temperatures, including electro-optic modulation, frequency comb generation, and microwave-optical transduction. These applications rely on devices with low optical loss to achieve high efficiency. Material absorption sets a lower limit to optical loss and is thus a crucial property to determine, particularly for integrated photonic devices. Using cavity-enhanced photothermal spectroscopy, we measure the absorption loss of BaTiO$_3$ ridge waveguides at wavelengths near 1550~nm to be $α_{\mathrm{abs}} = 10.9$~{\raisebox{0.5ex}{\tiny$^{+5.8}_{-0.4}$}} dB~m$^{-1}$, well below the propagation losses due to other sources, such as scattering. We simultaneously determine that BaTiO$_3$ has a large Kerr nonlinear refractive index of $n_{\mathrm{2,BaTiO_3}}$ = 1.8 {\raisebox{0.5ex}{\tiny$^{+0.3}_{-0.3}$}} $\times$ 10$^{-18}$ m$^2$ W$^{-1}$. Considering these results, photonic integrated circuits utilizing BaTiO$_3$ have the potential to achieve significantly higher efficiency than demonstrated to date and are especially interesting for applications exploiting the combination of Pockels and Kerr effects.

  • Open Access

    Absorption loss and Kerr nonlinearity in barium titanate waveguides

    by Annina Riedhauser, Charles Möhl, Johannes Schading, Daniele Caimi, David I. Indolese, Thomas M. Karg, Paul Seidler

    Because of its exceptionally large Pockels coefficient, barium titanate (BaTiO3) is a promising material for various photonic applications at both room and cryogenic temperatures, including electro-optic modulation, frequency comb generation, and microwave-optical transduction. These applications rely on devices with low optical loss to achieve high efficiency. Material absorption sets a lower limit to optical loss and is thus a crucial property to determine, particularly for integrated photonic devices. Using cavity-enhanced photothermal spectroscopy, we measure the absorption loss of BaTiO3 ridge waveguides at wavelengths near 1550 nm to be αabs = 10.9−0.4+5.8 dB m−1, well below the propagation losses due to other sources, such as scattering. We simultaneously determine that the BaTiO3 has a large Kerr nonlinear refractive index of n2,BaTiO3 = 1.8−0.3+0.3 × 10−18 m2 W−1. Considering these results, photonic integrated circuits utilizing BaTiO3 have the potential to achieve significantly higher efficiency than demonstrated to date and are especially interesting for applications exploiting the combination of Pockels and Kerr effects.


  • Open Access

    Integrated chirped photonic-crystal cavities in gallium phosphide for broadband soliton generation

    by Alberto Nardi, Alisa Davydova, Nikolai Kuznetsov, Miles H. Anderson, Charles Möhl, Johann Riemensberger, Tobias J. Kippenberg, Paul Seidler

    Chirped mirrors have underpinned advances in ultra-fast lasers based on bulk optics but have yet to be fully exploited in integrated photonics, where they could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, in which only waveguide width and height are varied to engineer dispersion. Here, we present an integrated photonic-crystal Fabry–Pérot resonator made of gallium phosphide (GaP), a material exhibiting a Kerr nonlinearity 200 times larger than that of silicon nitride and a high refractive index that permits the creation of strongly chirped photonic-crystal mirrors. Leveraging the additional degrees of freedom provided by integrated chirped mirrors, we disentangle optical losses from dispersion. We obtain an overall dispersion that is more anomalous than that achievable in both silicon nitride and gallium phosphide ring resonators with the same free-spectral range (FSR), while simultaneously obtaining higher quality factors than those of GaP ring resonators. With subharmonic pulsed pumping at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs in a device with a FSR of 55.9 GHz. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs. This approach to cavity design based on photonic-crystal reflectors offers nearly arbitrary dispersion engineering over the optical transparency window of the nonlinear material.


  • An Integrated Gallium Phosphide Optical Parametric Amplifier

    by Nikolai Kuznetsov, Alberto Nardi, Alisa Davydova, Mikhail Churaev, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

  • Top Cited Papers
    Open Access

    A heterogeneously integrated lithium niobate-on-silicon nitride photonic platform

    by Mikhail Churaev, Rui Ning Wang, Annina Riedhauser, Viacheslav Snigirev, Terence Blésin, Charles Möhl, Miles H. Anderson, Anat Siddharth, Youri Popoff, Ute Drechsler, et al.

    The availability of thin-film lithium niobate on insulator (LNOI) and advances in processing have led to the emergence of fully integrated LiNbO3 electro-optic devices. Yet to date, LiNbO3 photonic integrated circuits have mostly been fabricated using non-standard etching techniques and partially etched waveguides, that lack the reproducibility achieved in silicon photonics. Widespread application of thin-film LiNbO3 requires a reliable solution with precise lithographic control. Here we demonstrate a heterogeneously integrated LiNbO3 photonic platform employing wafer-scale bonding of thin-film LiNbO3 to silicon nitride (Si3N4) photonic integrated circuits. The platform maintains the low propagation loss (<0.1 dB/cm) and efficient fiber-to-chip coupling (3N4 waveguides and provides a link between passive Si3N4 circuits and electro-optic components with adiabatic mode converters experiencing insertion losses below 0.1 dB. Using this approach we demonstrate several key applications, thus providing a scalable, foundry-ready solution to complex LiNbO3 integrated photonic circuits.


  • Open Access

    Soliton Microcomb Generation in a III-V Photonic Crystal Cavity

    by Alberto Nardi, Alisa Davydova, Nikolai Kuznetsov, Miles H. Anderson, Charles Möhl, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

    Photonic crystals, material structures in which the dielectric function varies periodically in one, two, or three dimensions, can provide exquisite control over the propagation and confinement of light. By tailoring their band structure, exceptional optical effects can be achieved, such as slow light propagation or, through the creation of photonic bandgaps, optical cavities with both a high quality factor and a small mode volume. Photonic crystal cavities have been used to realize compact nano-lasers and achieve strong coupling to quantum emitters, such as semiconductor quantum dots, color centers, or cold atoms. A useful attribute of photonic crystals is the ability to create chirped mirrors. Chirping has underpinned advances in ultra-fast lasers based on bulk mirrors, but has yet to be fully exploited in integrated photonics, where it could provide a means to engineer otherwise unattainable dispersion profiles for a range of nonlinear optical applications, including soliton frequency comb generation. The vast majority of integrated resonators for frequency combs make use of microring geometries, where only waveguide width and height are varied to engineer dispersion. Generation of frequency combs has been demonstrated with one-dimensional photonic crystal cavities made of silicon nitride, but the low index contrast prevents formation of broad soliton combs. We overcome these challenges by using a photonic-crystal Fabry-Pérot resonator made of gallium phosphide, a material with a high refractive index and a Kerr nonlinearity 200 times larger than that of silicon nitride. We employ chirped photonic crystal mirrors to provide anomalous dispersion. With subharmonic pulsed pumping at an average power of 23.6 mW, we are able to access stable dissipative Kerr frequency combs. We demonstrate soliton formation with a 3-dB bandwidth of 3.0 THz, corresponding to a pulse duration of 60 fs.


  • Top Cited Papers
    Open Access

    Ultrafast tunable lasers using lithium niobate integrated photonics

    by Viacheslav Snigirev, Annina Riedhauser, Grigory Lihachev, Mikhail Churaev, Johann Riemensberger, Rui Ning Wang, Anat Siddharth, Guanhao Huang, Charles Möhl, Youri Popoff, et al.

    Early works1 and recent advances in thin-film lithium niobate (LiNbO3) on insulator have enabled low-loss photonic integrated circuits2,3, modulators with improved half-wave voltage4,5, electro-optic frequency combs6 and on-chip electro-optic devices, with applications ranging from microwave photonics to microwave-to-optical quantum interfaces7. Although recent advances have demonstrated tunable integrated lasers based on LiNbO3 (refs. 8,9), the full potential of this platform to demonstrate frequency-agile, narrow-linewidth integrated lasers has not been achieved. Here we report such a laser with a fast tuning rate based on a hybrid silicon nitride (Si3N4)–LiNbO3 photonic platform and demonstrate its use for coherent laser ranging. Our platform is based on heterogeneous integration of ultralow-loss Si3N4 photonic integrated circuits with thin-film LiNbO3 through direct bonding at the wafer level, in contrast to previously demonstrated chiplet-level integration10, featuring low propagation loss of 8.5 decibels per metre, enabling narrow-linewidth lasing (intrinsic linewidth of 3 kilohertz) by self-injection locking to a laser diode. The hybrid mode of the resonator allows electro-optic laser frequency tuning at a speed of 12 × 1015 hertz per second with high linearity and low hysteresis while retaining the narrow linewidth. Using a hybrid integrated laser, we perform a proof-of-concept coherent optical ranging (FMCW LiDAR) experiment. Endowing Si3N4 photonic integrated circuits with LiNbO3 creates a platform that combines the individual advantages of thin-film LiNbO3 with those of Si3N4, which show precise lithographic control, mature manufacturing and ultralow loss11,12.


  • Soliton Microcomb Generation in a Gallium Phosphide Photonic Crystal Cavity

    by Alberto Nardi, Alisa Davydova, Nikolai Kuznetsov, Charles Möhl, Miles Anderson, Johann Riemensberger, Paul Seidler, Tobias J. Kippenberg

    We report broadband bright soliton microcomb generation in the emerging platform gallium phosphide on insulator. We demonstrate a broadband dispersion-engineered photonic-crystal Fabry-Perot resonator with record-high quality factors.