Licheng Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Licheng Sun has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Baoxing Duan
Xidian University
8 shared publications - Yintang Yang
Xidian University
5 shared publications Yintang Yang
School of Microelectronics, Xidian University, Xian, Shaanxi, CHINA
3 shared publications- Yandong Wang
Key Laboratory of the Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xian, China
2 shared publications - Chunzao Wang
Key Laboratory of the Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi’an, China
1 shared publication J.-Y. Li
National Key Laboratory of Science and Technology on Antennas and Microwaves, Xidian University, Xi'an, Shaanxi 710071, China
1 shared publication
Latest Publications
- 27 January 2022
- Published by Springer Nature in Silicon
- Vol. 14 (15) , 9341-9348
Novel Fast-switching LIGBT with Single-Step Low-k Dielectric Layer and Assistant-Depletion Trench
- 27 January 2022
- Published by Springer Nature in Silicon
- Vol. 14 (15) , 9341-9348
Novel Fast-switching LIGBT with Single-Step Low-k Dielectric Layer and Assistant-Depletion Trench
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (5) , 2408-2413
Novel Snapback-Free SOI LIGBT With Shorted Anode and Trench Barriers
A novel fast-switching silicon-on-insulator lateral insulated gate bipolar transistor (SOI LIGBT) is proposed and investigated in this article. The proposed device introduces trench barriers (TBs) at the collector end based on shorted anode (SA) structure to eliminate the snapback effect. The introduced TB structure can make the flow path of electron current be compressed and extended when the SA LIGBT is turned on so that the opening of collector p+/n-junction is prior to that of collector n+/n-junction. At the same time, it retains the ability to extract unbalanced electrons when the SA LIGBT is turned off. Through the TCAD simulation, the obtained results show that snapback-free can be realized by changing trench depth and pitch between TB structures. Compared with the separated SA (SSA) LIGBT, the forward voltage drop of the proposed LIGBT is reduced by 13.9% with snapback-free and much shorter collector region, which also retains the ability to extract unbalanced electrons. Thus, under the same forward voltage drop of 1.49 V, the turn-off time, and loss of the proposed LIGBT is 20.3% and 21.1% lower than those of the conventional (Conv.) LIGBT, respectively. In general, the tradeoff between turn-off time and forward voltage drop of the proposed LIGBT has much better performance.
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (5) , 2408-2413
Novel Snapback-Free SOI LIGBT With Shorted Anode and Trench Barriers
A novel fast-switching silicon-on-insulator lateral insulated gate bipolar transistor (SOI LIGBT) is proposed and investigated in this article. The proposed device introduces trench barriers (TBs) at the collector end based on shorted anode (SA) structure to eliminate the snapback effect. The introduced TB structure can make the flow path of electron current be compressed and extended when the SA LIGBT is turned on so that the opening of collector p+/n-junction is prior to that of collector n+/n-junction. At the same time, it retains the ability to extract unbalanced electrons when the SA LIGBT is turned off. Through the TCAD simulation, the obtained results show that snapback-free can be realized by changing trench depth and pitch between TB structures. Compared with the separated SA (SSA) LIGBT, the forward voltage drop of the proposed LIGBT is reduced by 13.9% with snapback-free and much shorter collector region, which also retains the ability to extract unbalanced electrons. Thus, under the same forward voltage drop of 1.49 V, the turn-off time, and loss of the proposed LIGBT is 20.3% and 21.1% lower than those of the conventional (Conv.) LIGBT, respectively. In general, the tradeoff between turn-off time and forward voltage drop of the proposed LIGBT has much better performance.
- Open Access
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 409-414
Novel Low Loss LIGBT With Assisted Depletion N-Region and P-Buried Layer
A novel low loss lateral insulated gate bipolar transistor (LIGBT) with high voltage level is designed and studied in this paper, and is proposed with assisted depletion N-region (AD) and P-buried layer (PB) in the bulk Si substrate, named PBAD LIGBT. The proposed PBAD LIGBT utilizes the idea of electric field modulation (EFM) to greatly improve the breakdown voltage, which optimizes the lateral and longitudinal electric field distribution by introduced high electric field peak. Therefore, compared with conventional (Conv.) LIGBT, the shortened drift length of proposed PBAD LIGBT is beneficial to improve the forward and switching characteristics at the same time, while maintaining the same breakdown characteristics. When the breakdown voltage reaches 360 V, according to the TCAD simulation results, the drift length of proposed PBAD LIGBT is $20{\mu }\text{m}$ , which is 71.4% shorter than that of Conv. LIGBT of $70{\mu }\text{m}$ . As a result of shortening drift length, the forward voltage drop and turn-off loss of proposed PBAD LIGBT are reduced by 51.4% and 68.5%, respectively. The simulated trade-off curves show that, proposed PBAD LIGBT achieves significantly improved trade-off performance between turn-off loss and forward voltage drop than that of Conv. LIGBT, including PB LIGBT and AD LIGBT.
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 9, 409-414
Open AccessNovel Low Loss LIGBT With Assisted Depletion N-Region and P-Buried Layer
A novel low loss lateral insulated gate bipolar transistor (LIGBT) with high voltage level is designed and studied in this paper, and is proposed with assisted depletion N-region (AD) and P-buried layer (PB) in the bulk Si substrate, named PBAD LIGBT. The proposed PBAD LIGBT utilizes the idea of electric field modulation (EFM) to greatly improve the breakdown voltage, which optimizes the lateral and longitudinal electric field distribution by introduced high electric field peak. Therefore, compared with conventional (Conv.) LIGBT, the shortened drift length of proposed PBAD LIGBT is beneficial to improve the forward and switching characteristics at the same time, while maintaining the same breakdown characteristics. When the breakdown voltage reaches 360 V, according to the TCAD simulation results, the drift length of proposed PBAD LIGBT is $20{\mu }\text{m}$ , which is 71.4% shorter than that of Conv. LIGBT of $70{\mu }\text{m}$ . As a result of shortening drift length, the forward voltage drop and turn-off loss of proposed PBAD LIGBT are reduced by 51.4% and 68.5%, respectively. The simulated trade-off curves show that, proposed PBAD LIGBT achieves significantly improved trade-off performance between turn-off loss and forward voltage drop than that of Conv. LIGBT, including PB LIGBT and AD LIGBT.
- 9 April 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (5) , 055034
Novel gate-controlled bipolar composite field effect transistor with large on-state current
Novel gate-controlled bipolar composite field effect transistors (GCBFET) based on vertical MOSFETs are proposed and investigated in this paper for the first time, named VD-GCBFET and U-GCBFET, respectively, which feature the base-gate short connection mode instead of the conventional base-source short connection mode. When the devices are turned on, the composite bipolar junction transistor (BJT) provides an additional holes injection path, which is conducive to obtaining larger forward on-state current. Two conductive paths provided by the composite BJT and MOS structure not only improve the integration degree, but also greatly increase the forward on-state current while the breakdown mechanism remains unchanged. The simulation results show that, with the same structural parameters, the proposed GCBFETs have the same breakdown voltage and much lower threshold voltage compared with the corresponding vertical MOSFETs. Meanwhile, the proposed GCBFETs gain much larger forward on-state current which is over two orders of magnitude higher than that of the corresponding vertical MOSFETs. Moreover, due to the introduction of extra holes by the composite BJT, the proposed GCBFET has similar slow switching speed as IGBT.
- 9 April 2020
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 35 (5) , 055034
Novel gate-controlled bipolar composite field effect transistor with large on-state current
Novel gate-controlled bipolar composite field effect transistors (GCBFET) based on vertical MOSFETs are proposed and investigated in this paper for the first time, named VD-GCBFET and U-GCBFET, respectively, which feature the base-gate short connection mode instead of the conventional base-source short connection mode. When the devices are turned on, the composite bipolar junction transistor (BJT) provides an additional holes injection path, which is conducive to obtaining larger forward on-state current. Two conductive paths provided by the composite BJT and MOS structure not only improve the integration degree, but also greatly increase the forward on-state current while the breakdown mechanism remains unchanged. The simulation results show that, with the same structural parameters, the proposed GCBFETs have the same breakdown voltage and much lower threshold voltage compared with the corresponding vertical MOSFETs. Meanwhile, the proposed GCBFETs gain much larger forward on-state current which is over two orders of magnitude higher than that of the corresponding vertical MOSFETs. Moreover, due to the introduction of extra holes by the composite BJT, the proposed GCBFET has similar slow switching speed as IGBT.
- Open Access
- 4 March 2020
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 15 (3) , 155-158
Novel SOI LIGBT with fast‐switching by the electric field modulation
A novel silicon‐on‐insulator lateral insulated gate bipolar transistor (SOI LIGBT) is proposed and investigated in this work. The device features a single‐step buried oxide (SSBO) structure formed on the silicon‐on‐insulator (SOI) layer. The SSBO structure introduces a high electric field peak by the electric field modulation to modulate electric field distributions. Therefore, the proposed SOI LIGBT can maintain the high breakdown voltage (BV) while shortening the length of drift region, which achieves the decreased total number of stored carriers during the turn‐on and fast depletion of drift region during the turn‐off. As the simulation results show, under the same BV of 98 V, the drift region length of the proposed SOI LIGBT is 4.4 μm, which is much shorter than that of the conventional SOI LIGBT of 12.0 μm. So the turn‐off time of SSBO SOI LIGBT is 76.6% lower than that of the conventional SOI LIGBT at the same forward voltage drop of 1.72 V. It shows that the tradeoff between forward voltage drop and turn‐off time can be significantly improved.
- 4 March 2020
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 15 (3) , 155-158
Open AccessNovel SOI LIGBT with fast‐switching by the electric field modulation
A novel silicon‐on‐insulator lateral insulated gate bipolar transistor (SOI LIGBT) is proposed and investigated in this work. The device features a single‐step buried oxide (SSBO) structure formed on the silicon‐on‐insulator (SOI) layer. The SSBO structure introduces a high electric field peak by the electric field modulation to modulate electric field distributions. Therefore, the proposed SOI LIGBT can maintain the high breakdown voltage (BV) while shortening the length of drift region, which achieves the decreased total number of stored carriers during the turn‐on and fast depletion of drift region during the turn‐off. As the simulation results show, under the same BV of 98 V, the drift region length of the proposed SOI LIGBT is 4.4 μm, which is much shorter than that of the conventional SOI LIGBT of 12.0 μm. So the turn‐off time of SSBO SOI LIGBT is 76.6% lower than that of the conventional SOI LIGBT at the same forward voltage drop of 1.72 V. It shows that the tradeoff between forward voltage drop and turn‐off time can be significantly improved.
- 10 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (3) , 1085-1089
Accumulation-Mode Device: New Power MOSFET Breaking Superjunction Silicon Limit by Simulation Study
In this article, new structures are proposed with an extra electrode for accumulation-mode vertical double-diffused metal-oxide semiconductor (VDMOS) (EA VDMOS) and a gate electrode for accumulation-mode VDMOS (GA VDMOS). For accumulation-mode VDMOS, the drift region is lightly doped to support drain voltage in the OFF-state. A large density of electrons is accumulated to modulate the conductivity of the drift region in the ON-state. It is contradictory to obtain high breakdown voltage (BV) and low specific ON-resistance (RON,sp) in the conventional VDMOS, because both of them depend on the doping concentration of the drift region. This contradictory relationship between the BV and RON,sp is eliminated for EA and GA VDMOS, thereby breaking the superjunction (SJ) silicon limit. Simulation results indicate that RON,sp of the accumulation-mode VDMOS devices are significantly reduced. The RON,sp of EA and GA VDMOS can be reduced by 60% (0.85 mΩ · cm²) and 30% (1.68 mΩ · cm²) compared with the SJ VDMOS (2.41 mΩ · cm²) at the BV of 600 V, respectively. In addition, the performance of the accumulation-mode VDMOS is independent of charge balance which is necessary for the SJ VDMOS.
- 10 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (3) , 1085-1089
Accumulation-Mode Device: New Power MOSFET Breaking Superjunction Silicon Limit by Simulation Study
In this article, new structures are proposed with an extra electrode for accumulation-mode vertical double-diffused metal-oxide semiconductor (VDMOS) (EA VDMOS) and a gate electrode for accumulation-mode VDMOS (GA VDMOS). For accumulation-mode VDMOS, the drift region is lightly doped to support drain voltage in the OFF-state. A large density of electrons is accumulated to modulate the conductivity of the drift region in the ON-state. It is contradictory to obtain high breakdown voltage (BV) and low specific ON-resistance (RON,sp) in the conventional VDMOS, because both of them depend on the doping concentration of the drift region. This contradictory relationship between the BV and RON,sp is eliminated for EA and GA VDMOS, thereby breaking the superjunction (SJ) silicon limit. Simulation results indicate that RON,sp of the accumulation-mode VDMOS devices are significantly reduced. The RON,sp of EA and GA VDMOS can be reduced by 60% (0.85 mΩ · cm²) and 30% (1.68 mΩ · cm²) compared with the SJ VDMOS (2.41 mΩ · cm²) at the BV of 600 V, respectively. In addition, the performance of the accumulation-mode VDMOS is independent of charge balance which is necessary for the SJ VDMOS.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (6) , 2675-2680
Analysis of the Fast-Switching LIGBT With Double Gates and Integrated Schottky Barrier Diode
A novel fast-switching lateral-insulated gate bipolar transistor (LIGBT) with double gates and integrated Schottky barrier diode (SBD) is proposed and studied in this paper by TCAD simulation. In order to reduce the turn-off time and maintain a low forward voltage drop, the proposed structure introduces an integrated SBD structure at the anode and an additional trench gate at the cathode. First, the integrated SBD provides an extra electron extraction path and the additional trench gate enhances the injection of the N⁺-cathode. Furthermore, the insulated oxide pillar between the N-buffer and integrated SBD further reduces the snapback voltage. Finally, the simulation results show that the turn-off time of the conventional LIGBT is 52.4% larger than that of trench/planar gate SBD (TP-SBD) LIGBT under the same forward voltage of 1.49 V. Moreover, the latch current density of TP-SBD LIGBT is increased by nearly 200% compared to that of the conventional LIGBT, while almost the same latch voltage is obtained, so the proposed TP-SBD LIGBT can improve the latch immunity.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (6) , 2675-2680
Analysis of the Fast-Switching LIGBT With Double Gates and Integrated Schottky Barrier Diode
A novel fast-switching lateral-insulated gate bipolar transistor (LIGBT) with double gates and integrated Schottky barrier diode (SBD) is proposed and studied in this paper by TCAD simulation. In order to reduce the turn-off time and maintain a low forward voltage drop, the proposed structure introduces an integrated SBD structure at the anode and an additional trench gate at the cathode. First, the integrated SBD provides an extra electron extraction path and the additional trench gate enhances the injection of the N⁺-cathode. Furthermore, the insulated oxide pillar between the N-buffer and integrated SBD further reduces the snapback voltage. Finally, the simulation results show that the turn-off time of the conventional LIGBT is 52.4% larger than that of trench/planar gate SBD (TP-SBD) LIGBT under the same forward voltage of 1.49 V. Moreover, the latch current density of TP-SBD LIGBT is increased by nearly 200% compared to that of the conventional LIGBT, while almost the same latch voltage is obtained, so the proposed TP-SBD LIGBT can improve the latch immunity.
- 1 October 2018
- Published by Elsevier in Superlattices and Microstructures
- Vol. 122, 631-635
Analysis of the novel Si/SiC heterojunction IGBT characteristics by TCAD simulation
- 1 October 2018
- Published by Elsevier in Superlattices and Microstructures
- Vol. 122, 631-635
Analysis of the novel Si/SiC heterojunction IGBT characteristics by TCAD simulation
- 1 January 2011
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 25 (8-9) , 1113-1121
A Wideband Circularly Polarized Candy-Like Patch Antenna
The paper demonstrates a new means to achieve a broad impedance bandwidth and circularly polarized bandwidth with a suspended candy-like antenna and a T-shaped feeding probe. By incorporating a long probe inside a high substantial cavity (∼ 0.16λ), a circularly polarized (CP) antenna in broadside direction is achieved. The horizontal arm of the probe is implemented by means of a printed monopole that is diagonally coupled to a small candy-like copper plate. The CP antenna features a wide operating bandwidth of 15.2% ranging from 1.47 Hz to 1.71 GHz (VSWR < 2 and axial ratio < 3 dB). The maximum gain of this antenna is recorded as no less than 7.2 dBic across the bandwidth. The dimension of the candy-like patch is 0.3λ × 0.3λ, whereas the ground plane size is 1.8λ × 1.8λ. The measured results are presented.
- 1 January 2011
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 25 (8-9) , 1113-1121
A Wideband Circularly Polarized Candy-Like Patch Antenna
The paper demonstrates a new means to achieve a broad impedance bandwidth and circularly polarized bandwidth with a suspended candy-like antenna and a T-shaped feeding probe. By incorporating a long probe inside a high substantial cavity (∼ 0.16λ), a circularly polarized (CP) antenna in broadside direction is achieved. The horizontal arm of the probe is implemented by means of a printed monopole that is diagonally coupled to a small candy-like copper plate. The CP antenna features a wide operating bandwidth of 15.2% ranging from 1.47 Hz to 1.71 GHz (VSWR < 2 and axial ratio < 3 dB). The maximum gain of this antenna is recorded as no less than 7.2 dBic across the bandwidth. The dimension of the candy-like patch is 0.3λ × 0.3λ, whereas the ground plane size is 1.8λ × 1.8λ. The measured results are presented.