Samuel L. Esarey
Research Subjects
Samuel L. Esarey has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Bart M. Bartlett
University of Michigan
3 shared publications Amy Toolis
Coatings and Innovation Center, PPG, 4325 Rosanna Drive, Allison Park, Pennsylvania 15101, United States
1 shared publicationAndrew J. Gayle
Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
1 shared publicationAshley R. Bielinski
Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
1 shared publication- Bolin Li
High Magnetic Field Laboratory, HFIPS, Chinese Academy of Sciences, Hefei 230031, P. R. China
1 shared publication Eric Kazyak
Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
1 shared publication
Latest Publications
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1895
Advancing Green Hydrogen Production with Innovative Materials and Coatings
Green hydrogen is a vital solution for reducing greenhouse gas emissions in various sectors of the global economy. As proton exchange membrane (PEM) electrolyzer deployments scale to meet hydrogen production demands, it is critical that raw materials and coatings used in stack designs are carefully engineered for a balance of cost, efficiency, and durability. In this presentation, we will describe technical approaches to assist in the customization of porous transport layer (PTL) components for optimal properties such as mass transport, conductivity, and corrosion resistance. In particular, the design of expanded metal sheets as PTL flow-fields will be described. Computational fluid dynamics (CFD) modeling is used to predict key hydrodynamic properties and inform the engineering of these components. With a specific focus on scalable technologies that can achieve GW/y production volumes, we will demonstrate how PTL assemblies can be economically optimized for performance, under specific PEM electrolyzer form factors and operational conditions.
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (34) , 1895
Advancing Green Hydrogen Production with Innovative Materials and Coatings
Green hydrogen is a vital solution for reducing greenhouse gas emissions in various sectors of the global economy. As proton exchange membrane (PEM) electrolyzer deployments scale to meet hydrogen production demands, it is critical that raw materials and coatings used in stack designs are carefully engineered for a balance of cost, efficiency, and durability. In this presentation, we will describe technical approaches to assist in the customization of porous transport layer (PTL) components for optimal properties such as mass transport, conductivity, and corrosion resistance. In particular, the design of expanded metal sheets as PTL flow-fields will be described. Computational fluid dynamics (CFD) modeling is used to predict key hydrodynamic properties and inform the engineering of these components. With a specific focus on scalable technologies that can achieve GW/y production volumes, we will demonstrate how PTL assemblies can be economically optimized for performance, under specific PEM electrolyzer form factors and operational conditions.
- 5 November 2020
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 53 (22) , 10189-10197
Nondestructive In Situ Detection of Chemical Reactions at the Buried Interface between Polyurethane and Isocyanate-Based Primer
- 5 November 2020
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 53 (22) , 10189-10197
Nondestructive In Situ Detection of Chemical Reactions at the Buried Interface between Polyurethane and Isocyanate-Based Primer
- 1 May 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (9) , 3221-3227
Atomic Layer Deposition of Bismuth Vanadate Core–Shell Nanowire Photoanodes
- 1 May 2019
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 31 (9) , 3221-3227
Atomic Layer Deposition of Bismuth Vanadate Core–Shell Nanowire Photoanodes
- 30 March 2018
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 34 (15) , 4535-4547
pH-Dependence of Binding Constants and Desorption Rates of Phosphonate- and Hydroxamate-Anchored [Ru(bpy)3]2+ on TiO2 and WO3
The binding constants and rate constants for desorption of the modified molecular dye [Ru(bpy)3]2+ anchored by either phosphonate or hydroxamate on the bipyridine ligand to anatase TiO2 and WO3 have been measured. In aqueous media at pH 1–10, repulsive electrostatic interactions between the negatively charged anchor and the negatively charged surface govern phosphonate desorption under neutral and basic conditions for TiO2 anatase due to the high acidity of phosphonic acid (pKa,4 = 5.1). In contrast, the lower acidity of hydroxamate (pKa,1 = 6.5, pKa,2 = 9.1) leads to little change in adsorption/desorption properties as a function of pH from 1 to 7. The binding constant for hydroxamate is 103 in water, independent of pH in this range. These results are true for WO3 as well, but are not reported at pH > 4 due to its Arrhenius acidity. Kinetics for desorption as a function of pH are reported, with a proposed mechanism for phosphonate desorption at high pH being the electrostatic repulsion of negative charges between the surface and the anionic anchor. Further, the hydroxamic acid anchor itself is likely the site of quasi-reversible redox activity in [Ru(bpy)2(2,2′-bpy-4,4′-(C(O)N(OH))2)]2+, which does not lead to any measurable deterioration of the complex within 2 h of dark cyclic voltammogram scans in aqueous media. These results posit phosphonate as the preferred anchoring group under acidic conditions and hydroxamate for neutral/basic conditions.
- 30 March 2018
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 34 (15) , 4535-4547
pH-Dependence of Binding Constants and Desorption Rates of Phosphonate- and Hydroxamate-Anchored [Ru(bpy)3]2+ on TiO2 and WO3
The binding constants and rate constants for desorption of the modified molecular dye [Ru(bpy)3]2+ anchored by either phosphonate or hydroxamate on the bipyridine ligand to anatase TiO2 and WO3 have been measured. In aqueous media at pH 1–10, repulsive electrostatic interactions between the negatively charged anchor and the negatively charged surface govern phosphonate desorption under neutral and basic conditions for TiO2 anatase due to the high acidity of phosphonic acid (pKa,4 = 5.1). In contrast, the lower acidity of hydroxamate (pKa,1 = 6.5, pKa,2 = 9.1) leads to little change in adsorption/desorption properties as a function of pH from 1 to 7. The binding constant for hydroxamate is 103 in water, independent of pH in this range. These results are true for WO3 as well, but are not reported at pH > 4 due to its Arrhenius acidity. Kinetics for desorption as a function of pH are reported, with a proposed mechanism for phosphonate desorption at high pH being the electrostatic repulsion of negative charges between the surface and the anionic anchor. Further, the hydroxamic acid anchor itself is likely the site of quasi-reversible redox activity in [Ru(bpy)2(2,2′-bpy-4,4′-(C(O)N(OH))2)]2+, which does not lead to any measurable deterioration of the complex within 2 h of dark cyclic voltammogram scans in aqueous media. These results posit phosphonate as the preferred anchoring group under acidic conditions and hydroxamate for neutral/basic conditions.
- 25 October 2016
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 55 (21) , 11040-11049
Determining the Fate of a Non-Heme Iron Oxidation Catalyst Under Illumination, Oxygen, and Acid
We analyze the stability of the non-heme water oxidation catalyst (WOC), Fe(bpmcn)Cl2 toward oxygen and illumination under nonaqueous and acidic conditions. Fe(bpmcn)Cl2 has been previously used as a C–H activation catalyst, a homogeneous WOC, and as a cocatalyst anchored to WO3 for photoelectrochemical water oxidation. This paper reports that the ligand dissociates at pH 1 with a rate constant k = 19.8(2) × 10–3 min–1, resulting in loss of catalytic activity. The combination of UV–vis experiments, 1H NMR spectroscopy, and cyclic voltammetry confirm free bpmcn and Fe2+ present in solution under acidic conditions. Even under nonaqueous conditions, both oxygen and illumination together show slow oxidation of iron over the course of a few hours, consistent with forming an Fe3+–O2– intermediate as corroborated by resonance-enhanced Raman spectroscopy, with a rate constant of k = 3.03(8) × 10–3 min–1. This finding has implications in both the merits of non-heme iron complexes as WOCs as well as cocatalysts in photoelectrochemical schemes: the decomposition mechanisms may include both anchoring group hydrolysis and instability under illumination.
- 25 October 2016
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 55 (21) , 11040-11049
Determining the Fate of a Non-Heme Iron Oxidation Catalyst Under Illumination, Oxygen, and Acid
We analyze the stability of the non-heme water oxidation catalyst (WOC), Fe(bpmcn)Cl2 toward oxygen and illumination under nonaqueous and acidic conditions. Fe(bpmcn)Cl2 has been previously used as a C–H activation catalyst, a homogeneous WOC, and as a cocatalyst anchored to WO3 for photoelectrochemical water oxidation. This paper reports that the ligand dissociates at pH 1 with a rate constant k = 19.8(2) × 10–3 min–1, resulting in loss of catalytic activity. The combination of UV–vis experiments, 1H NMR spectroscopy, and cyclic voltammetry confirm free bpmcn and Fe2+ present in solution under acidic conditions. Even under nonaqueous conditions, both oxygen and illumination together show slow oxidation of iron over the course of a few hours, consistent with forming an Fe3+–O2– intermediate as corroborated by resonance-enhanced Raman spectroscopy, with a rate constant of k = 3.03(8) × 10–3 min–1. This finding has implications in both the merits of non-heme iron complexes as WOCs as well as cocatalysts in photoelectrochemical schemes: the decomposition mechanisms may include both anchoring group hydrolysis and instability under illumination.