Daniel Fredrich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daniel Fredrich has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Giusti
Imperial College London
5 shared publications - William Philip Jones
Department of Mechanical Engineering, Imperial College London, London, UK
3 shared publications A. J. Marquis
Department of Mechanical Engineering, Imperial College London , Exhibition Road, London SW7 2AZ, United Kingdom
2 shared publications- Luigi Miniero
CAPS Laboratory, Mechanical and Process Engineering Department, ETH Zürich, Zurich, Switzerland
2 shared publications - Nicolas Noiray
ETH Zurich
2 shared publications - Andrea D'Anna
Department of Chemical, Material and Industrial Production Engineering, University Federico II, Naples, Italy
1 shared publication
Latest Publications
- Open Access
- 7 August 2025
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 29 (6) , 643-674
Direct numerical simulation of nanosecond repetitively pulsed discharges for plasma-assisted flame stabilisation in flowing environments
- 7 August 2025
- Published by Taylor & Francis in Combustion Theory and Modelling
- Vol. 29 (6) , 643-674
Open AccessDirect numerical simulation of nanosecond repetitively pulsed discharges for plasma-assisted flame stabilisation in flowing environments
- Open Access
- 12 September 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Machine learning assisted characterisation and prediction of droplet distributions in a liquid jet in cross-flow
- 12 September 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Open AccessMachine learning assisted characterisation and prediction of droplet distributions in a liquid jet in cross-flow
- Open Access
- 5 September 2023
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 111 (3) , 953-993
Numerical Investigation of Combustion Instabilities in Swirling Flames with Hydrogen Enrichment
This work presents a numerical study on technically premixed, swirl-stabilised flames in the PRECCINSTA model combustor. The employed method, BOFFIN-LES, comprises a fully compressible formulation to study unsteady combustion with thermo-acoustic instabilities. To allow for this, the iso-thermal flows are first investigated, based on which three reacting cases are established. The investigation delves into various aspects including flame topology, flow characteristics, and the related thermo-acoustic and hydrodynamic instabilities are studied and results are benchmarked against available measurement data. The dominant feedback mechanism of the observed thermo-acoustic fluctuations is identified; the evolution of the helical vortex is discussed together with the related flame stabilisation process. Furthermore, the interplay of the thermo-acoustic oscillations, helical structure, and the flame stabilisation process is summarised in the end, with the potential effect of the wall-heat transfer on them discussed. This work establishes that the Large Eddy Simulation (LES) effectively captures the iso-thermal flow dynamics and the flame topology under various operating conditions, with a good prediction of the thermo-acoustic frequencies in all the cases. The dominant driving mechanism of the observed thermo-acoustic fluctuations was identified as a combined effect of equivalence ratio and velocity fluctuations in all the cases investigated. The effect of Hydrogen enrichment on modifying the flame topology and changing the thermo-acoustic instability features are well predicted by the simulations. Moreover, different modes of the helical vortex are detected, and their periodic excitement, evolution, and effect on flame stabilisation are discussed in great detail. To conclude, this LES-based investigation offers valuable insights into the complex interplay of unsteady combustion, acoustic fluctuations, flow dynamics, and solid boundaries within swirling flames subjected to unsteady conditions.
- 5 September 2023
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 111 (3) , 953-993
Open AccessNumerical Investigation of Combustion Instabilities in Swirling Flames with Hydrogen Enrichment
This work presents a numerical study on technically premixed, swirl-stabilised flames in the PRECCINSTA model combustor. The employed method, BOFFIN-LES, comprises a fully compressible formulation to study unsteady combustion with thermo-acoustic instabilities. To allow for this, the iso-thermal flows are first investigated, based on which three reacting cases are established. The investigation delves into various aspects including flame topology, flow characteristics, and the related thermo-acoustic and hydrodynamic instabilities are studied and results are benchmarked against available measurement data. The dominant feedback mechanism of the observed thermo-acoustic fluctuations is identified; the evolution of the helical vortex is discussed together with the related flame stabilisation process. Furthermore, the interplay of the thermo-acoustic oscillations, helical structure, and the flame stabilisation process is summarised in the end, with the potential effect of the wall-heat transfer on them discussed. This work establishes that the Large Eddy Simulation (LES) effectively captures the iso-thermal flow dynamics and the flame topology under various operating conditions, with a good prediction of the thermo-acoustic frequencies in all the cases. The dominant driving mechanism of the observed thermo-acoustic fluctuations was identified as a combined effect of equivalence ratio and velocity fluctuations in all the cases investigated. The effect of Hydrogen enrichment on modifying the flame topology and changing the thermo-acoustic instability features are well predicted by the simulations. Moreover, different modes of the helical vortex are detected, and their periodic excitement, evolution, and effect on flame stabilisation are discussed in great detail. To conclude, this LES-based investigation offers valuable insights into the complex interplay of unsteady combustion, acoustic fluctuations, flow dynamics, and solid boundaries within swirling flames subjected to unsteady conditions.
- Open Access
- 14 July 2023
- Published by Elsevier in Combustion and Flame
- Vol. 256
Air-blast atomization and ignition of a kerosene spray in hot vitiated crossflow
- 14 July 2023
- Published by Elsevier in Combustion and Flame
- Vol. 256
Open AccessAir-blast atomization and ignition of a kerosene spray in hot vitiated crossflow
- Open Access
- 1 November 2022
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 160
Electrostatic fields for the control of evaporating charged fuel sprays
- 1 November 2022
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 160
Open AccessElectrostatic fields for the control of evaporating charged fuel sprays
- Open Access
- 20 August 2022
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 109 (4) , 991-1010
Large Eddy Simulation of a Reacting Kerosene Spray in Hot Vitiated Cross-Flow
The evaporation and combustion characteristics of a kerosene spray injected perpendicularly into a cross-flow of high-temperature vitiated air is investigated. This fundamental flow configuration has wider implications for the future development of ultra-low emission aeronautical combustors, particularly with respect to technologies involving MILD combustion. Large eddy simulations with a Eulerian–Lagrangian framework are performed to investigate the spray evolution and the characteristics of the reaction zone for a range of conditions. For the closure of turbulence-chemistry interactions at the sub-grid scales, a transported probability density function approach solved by the Eulerian stochastic fields method is applied. A configuration based on the use of airblast atomisation is assessed first and compared with experimental observations. The effect of the atomiser air-to-liquid mass flow ratio is studied in greater detail, both in terms of the resulting gas-phase properties and the droplet evaporation process. Then, the effect of ambient pressure on the global spray flame behaviour is examined. For this part of the study, no atomising air is included in the simulation to separate the effects of ambient pressure on the spray from the interaction with the air jet. Analysis of the flame and spray properties at cross-flow operating pressures of 1 atm, 2 bar and 4 bar highlights the strong coupling between the reacting flow and droplet evaporation characteristics, which are highly affected by the penetration of the spray into a flow field characterised by relatively large gradients of temperature. The results reported in this work provide fundamental understanding for the development of novel low-emission combustion technologies and demonstrate the feasibility of applying large eddy simulation with detailed chemistry for the investigation of reacting aviation fuel sprays in hot vitiated cross-flow.
- 20 August 2022
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 109 (4) , 991-1010
Open AccessLarge Eddy Simulation of a Reacting Kerosene Spray in Hot Vitiated Cross-Flow
The evaporation and combustion characteristics of a kerosene spray injected perpendicularly into a cross-flow of high-temperature vitiated air is investigated. This fundamental flow configuration has wider implications for the future development of ultra-low emission aeronautical combustors, particularly with respect to technologies involving MILD combustion. Large eddy simulations with a Eulerian–Lagrangian framework are performed to investigate the spray evolution and the characteristics of the reaction zone for a range of conditions. For the closure of turbulence-chemistry interactions at the sub-grid scales, a transported probability density function approach solved by the Eulerian stochastic fields method is applied. A configuration based on the use of airblast atomisation is assessed first and compared with experimental observations. The effect of the atomiser air-to-liquid mass flow ratio is studied in greater detail, both in terms of the resulting gas-phase properties and the droplet evaporation process. Then, the effect of ambient pressure on the global spray flame behaviour is examined. For this part of the study, no atomising air is included in the simulation to separate the effects of ambient pressure on the spray from the interaction with the air jet. Analysis of the flame and spray properties at cross-flow operating pressures of 1 atm, 2 bar and 4 bar highlights the strong coupling between the reacting flow and droplet evaporation characteristics, which are highly affected by the penetration of the spray into a flow field characterised by relatively large gradients of temperature. The results reported in this work provide fundamental understanding for the development of novel low-emission combustion technologies and demonstrate the feasibility of applying large eddy simulation with detailed chemistry for the investigation of reacting aviation fuel sprays in hot vitiated cross-flow.
- Open Access
- 14 April 2022
- Published by Elsevier in Combustion and Flame
- Vol. 241
Numerical investigation of multi-component droplet evaporation and autoignition for aero-engine applications
- 14 April 2022
- Published by Elsevier in Combustion and Flame
- Vol. 241
Open AccessNumerical investigation of multi-component droplet evaporation and autoignition for aero-engine applications
- Open Access
- 1 August 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (8) , 085122
A combined oscillation cycle involving self-excited thermo-acoustic and hydrodynamic instability mechanisms
The paper examines the combined effects of several interacting thermo-acoustic and hydrodynamic instability mechanisms that are known to influence self-excited combustion instabilities often encountered in the late design stages of modern low-emission gas turbine combustors. A compressible large eddy simulation approach is presented, comprising the flame burning regime independent, modeled probability density function evolution equation/stochastic fields solution method. The approach is subsequently applied to the PRECCINSTA (PREDiction and Control of Combustion INSTAbilities) model combustor and successfully captures a fully self-excited limit-cycle oscillation without external forcing. The predicted frequency and amplitude of the dominant thermo-acoustic mode and its first harmonic are shown to be in excellent agreement with available experimental data. Analysis of the phase-resolved and phase-averaged fields leads to a detailed description of the superimposed mass flow rate and equivalence ratio fluctuations underlying the governing feedback loop. The prevailing thermo-acoustic cycle features regular flame liftoff and flashback events in combination with a flame angle oscillation, as well as multiple hydrodynamic phenomena, i.e., toroidal vortex shedding and a precessing vortex core. The periodic excitation and suppression of these hydrodynamic phenomena is confirmed via spectral proper orthogonal decomposition and found to be controlled by an oscillation of the instantaneous swirl number. Their local impact on the heat release rate, which is predominantly modulated by flame-vortex roll-up and enhanced mixing of fuel and oxidizer, is further described and investigated. Finally, the temporal relationship between the flame “surface area,” flame-averaged mixture fraction, and global heat release rate is shown to be directly correlated.
- 1 August 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (8) , 085122
Open AccessA combined oscillation cycle involving self-excited thermo-acoustic and hydrodynamic instability mechanisms
The paper examines the combined effects of several interacting thermo-acoustic and hydrodynamic instability mechanisms that are known to influence self-excited combustion instabilities often encountered in the late design stages of modern low-emission gas turbine combustors. A compressible large eddy simulation approach is presented, comprising the flame burning regime independent, modeled probability density function evolution equation/stochastic fields solution method. The approach is subsequently applied to the PRECCINSTA (PREDiction and Control of Combustion INSTAbilities) model combustor and successfully captures a fully self-excited limit-cycle oscillation without external forcing. The predicted frequency and amplitude of the dominant thermo-acoustic mode and its first harmonic are shown to be in excellent agreement with available experimental data. Analysis of the phase-resolved and phase-averaged fields leads to a detailed description of the superimposed mass flow rate and equivalence ratio fluctuations underlying the governing feedback loop. The prevailing thermo-acoustic cycle features regular flame liftoff and flashback events in combination with a flame angle oscillation, as well as multiple hydrodynamic phenomena, i.e., toroidal vortex shedding and a precessing vortex core. The periodic excitation and suppression of these hydrodynamic phenomena is confirmed via spectral proper orthogonal decomposition and found to be controlled by an oscillation of the instantaneous swirl number. Their local impact on the heat release rate, which is predominantly modulated by flame-vortex roll-up and enhanced mixing of fuel and oxidizer, is further described and investigated. Finally, the temporal relationship between the flame “surface area,” flame-averaged mixture fraction, and global heat release rate is shown to be directly correlated.
- Open Access
- 17 February 2021
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 35 (9) , 7092-7106
Soot-Free Low-NOx Aeronautical Combustor Concept: The Lean Azimuthal Flame for Kerosene Sprays
- 17 February 2021
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 35 (9) , 7092-7106
Open AccessSoot-Free Low-NOx Aeronautical Combustor Concept: The Lean Azimuthal Flame for Kerosene Sprays