Patrizia Ferretti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Patrizia Ferretti has a total of 263 co-authors. Here are the top co-authors by number of shared publications:
- Teresa Rodrigues
Divisão de Geologia e Georecursos Marinhos, Instituto Português do Mar e da Atmosfera (IPMA), Rua Alfredo Magalhães Ramalho 6, 1495-006 Lisboa, Portugal
5 shared publications - Andrea Spolaor
Istituto di Scienze Polari (Venezia, Italy)
4 shared publications - Aradhna Tripati
Department of Earth, Planetary & Space Sciences, University of California, Los Angeles, Los Angeles, CA 90025, USA
4 shared publications - Carlo Barbante
Department of Environmental Sciences, Informatics and Statistics, Ca’ Foscari University of Venice, Venice, Italy, 155 Via Torino, 30172 Venezia Mestre, Italy
4 shared publications - David Arnold Hodell
Department of Earth Sciences University of Cambridge Cambridge UK
4 shared publications - Luca Capraro4 shared publications
Latest Publications
- Open Access
- 21 February 2026
- Published by Elsevier in Quaternary Science Reviews
- Vol. 381
Monte San Nicola (Sicily): Gelasian GSSP and base Quaternary/Pleistocene
- 21 February 2026
- Published by Elsevier in Quaternary Science Reviews
- Vol. 381
Open AccessMonte San Nicola (Sicily): Gelasian GSSP and base Quaternary/Pleistocene
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Low-temperature hyper-spectral acquisitions of slabs with water ice and Martian simulant MGS-1.
Introduction:Several space missions have confirmed the presence of ice in our Solar System, including on the surface and subsurface of Mars. The North Polar Cap on Mars shows stratified scarps made of water ice with a minor content of inclusions. These stratified sequences constitute the North Polar Layered Deposits (NPLD). Inclusions vary in terms of compositions - such as lithic materials and dry ice - and in terms of quantity because of climate changes due to astronomical parameters variations [1]. Variations among polar layers are so evident that they can be detected from orbital instruments, such as the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the NASA Mars Reconnaissance Orbiter (MRO). This space spectrometer operates in the VNIR-SWIR range (400-4000 nm), with a spectral sampling of 6.55 nm/channel and a spatial resolution of 18.4 m/px, enabling the detection of the surface composition on Mars [2].Our project aims to produce synthetic icy analogs with similar spectral characteristics to the uppermost part of the North Polar Cap of Mars. Spectra of these analogs will be comparable to the North Polar Layered Deposits (NPLD) spectra collected by CRISM to better understand the composition of the dust inclusions into the polar layers.Methodology: Martian SimulantsAfter a complete characterization of three commercially available Martian simulants (Figure 1) [3], which are Mars Global High-Fidelity Martian Dirt Simulant (MGS-1) [4], Mojave Mars Simulant (MMS-1) and Enhanced Mars Simulant (MMS-2) [5], we selected the most suitable simulant for our project. Indeed, the MGS-1 simulant, in particular its finest component (0-32 µm), fit pretty well the spectrum of the atmospheric dust, that could be entrapped in the North Polar Layered Deposits [6]. Moreover, the 0-32 µm grainsize reflects the grainsize that the Martian wind could raise and maintain in atmosphere [7]. Figure 1. Three Martian commercially available simulants analyzed in this work.Laboratory set-up:We used the Headwall Photonics Nano Hyperspec VNIR imaging camera and the Micro Hyperspec SWIR imaging camera and their accommodation stage. The accommodations stage was modified to allow spectral acquisition of icy sample at low temperatures: cooling system for the sample-holder, thermocouple, glove-box filled with nitrogen to prevent the water condensation over the samples (Figure 2).Figure 2. Hyperspectral camera and its modified stage to acquire spectra of icy slabs.Icy slabsMixtures containing different quantities of the finest grains of MGS-1 and deionized water were frozen in narrow slabs to prevent the separation of the two components. The freezing was performed using the followed two methods:at -80°C simulating the summer temperature at the Martian North Pole [8] to achieve a heterogeneous distribution of the dust into the ice (slow-cooling slab); instantaneously in liquid nitrogen for a homogeneous distribution (fast-cooling slab). We acquired hyperspectral data using the set-up previously described, varying not only the dust content into the icy slabs but also the sample temperature during the acquisitions (Figure 3).Figure 3. Example of a slab slowly cooled at 193K with 25% dust.Preliminary results:Variations in dust amount.Both slow-cooling and fast-cooling slabs display absorption bands at 500 nm due to the iron charge transfer and at 1500 and 2000 nm associated with water ice. Increasing the inclusion percentage in the mixtures resulted in a deepening of the 500 nm band and a weakening of 1500 and 2000 nm bands.Figure 4. VNIR and SWIR spectra of fast-cooling slabs varying the dust content.Variations in temperature.Considering that surface temperatures on the North Polar Cap varies from 148 K to 203 K, in winter and in summer respectively [8], we performed experiments within this range.The major spectral features keep their positions unchanged in both typologies of slabs. We recorded a general upward shift of the whole reflectance and the weakening of the absorption band at 1650 nm, with the increasing of the sample temperature. Figure 5. SWIR spectra of slow-cooling slab with 25% dust, varying the sample temperature.Variations due to different cooling methods.The spectra of the fast-cooling slabs have more marked spectral features in the whole wavelength range than the slow-cooling slabs spectra. This is probably due to the different procedures of sample preparation and cooling, that cause different crystal grainsize.Figure 6. SWIR spectra of fast-cooling and slow-cooling slabs with 15% dust at -90°C.Conclusions:The laboratory set-up presented in this work enables the imaging hyper-spectral acquisition of icy slabs at low temperatures. Moreover, icy slabs are probably more representative than granular ice of the exposed compact ice along the walls of the Martian North Polar Layered Deposits, as well as of the icy crust of small bodies in the outer Solar System. Additionally, the icy slabs allow us to incorporate up to 35% dust into the ice whereas granular ice preparation can not exceed 5% of dust content.Finally, we are now improving the laboratory set-up with the building of a cryo-genic cell, which allows us to reach even lower temperature and have a better control of the temperature and atmospheric environment during the experiments.References: [1] Byrne S. (2009) Annu. Rev. Earth. Planet. Sci., 37(1), 535-560, https://www.annualreviews.org/doi/pdf/10.1146/annurev.earth.031208.100101.[2] Viviano-Beck C. E. et al. (2014) J. Geophys. Res., 119(6), 1403-1431, https://doi.org/10.1002/2014JE004627.[3] Costa et al. (2024) Data in Brief, 57, https://doi.org/10.1016/j.dib.2024.111099.[4] Cannon K. M. et al. (2019) Icarus., 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019. [5] Peters et al. (2008) Icarus, 197, 470–479, https://doi.org/10.1016/j.icarus.2008.05.004.[6] Poulet, F. et al. (2009) Icarus 201(1), 69-83,...
- 9 July 2025
- Published by Copernicus GmbH
Open AccessLow-temperature hyper-spectral acquisitions of slabs with water ice and Martian simulant MGS-1.
Introduction:Several space missions have confirmed the presence of ice in our Solar System, including on the surface and subsurface of Mars. The North Polar Cap on Mars shows stratified scarps made of water ice with a minor content of inclusions. These stratified sequences constitute the North Polar Layered Deposits (NPLD). Inclusions vary in terms of compositions - such as lithic materials and dry ice - and in terms of quantity because of climate changes due to astronomical parameters variations [1]. Variations among polar layers are so evident that they can be detected from orbital instruments, such as the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the NASA Mars Reconnaissance Orbiter (MRO). This space spectrometer operates in the VNIR-SWIR range (400-4000 nm), with a spectral sampling of 6.55 nm/channel and a spatial resolution of 18.4 m/px, enabling the detection of the surface composition on Mars [2].Our project aims to produce synthetic icy analogs with similar spectral characteristics to the uppermost part of the North Polar Cap of Mars. Spectra of these analogs will be comparable to the North Polar Layered Deposits (NPLD) spectra collected by CRISM to better understand the composition of the dust inclusions into the polar layers.Methodology: Martian SimulantsAfter a complete characterization of three commercially available Martian simulants (Figure 1) [3], which are Mars Global High-Fidelity Martian Dirt Simulant (MGS-1) [4], Mojave Mars Simulant (MMS-1) and Enhanced Mars Simulant (MMS-2) [5], we selected the most suitable simulant for our project. Indeed, the MGS-1 simulant, in particular its finest component (0-32 µm), fit pretty well the spectrum of the atmospheric dust, that could be entrapped in the North Polar Layered Deposits [6]. Moreover, the 0-32 µm grainsize reflects the grainsize that the Martian wind could raise and maintain in atmosphere [7]. Figure 1. Three Martian commercially available simulants analyzed in this work.Laboratory set-up:We used the Headwall Photonics Nano Hyperspec VNIR imaging camera and the Micro Hyperspec SWIR imaging camera and their accommodation stage. The accommodations stage was modified to allow spectral acquisition of icy sample at low temperatures: cooling system for the sample-holder, thermocouple, glove-box filled with nitrogen to prevent the water condensation over the samples (Figure 2).Figure 2. Hyperspectral camera and its modified stage to acquire spectra of icy slabs.Icy slabsMixtures containing different quantities of the finest grains of MGS-1 and deionized water were frozen in narrow slabs to prevent the separation of the two components. The freezing was performed using the followed two methods:at -80°C simulating the summer temperature at the Martian North Pole [8] to achieve a heterogeneous distribution of the dust into the ice (slow-cooling slab); instantaneously in liquid nitrogen for a homogeneous distribution (fast-cooling slab). We acquired hyperspectral data using the set-up previously described, varying not only the dust content into the icy slabs but also the sample temperature during the acquisitions (Figure 3).Figure 3. Example of a slab slowly cooled at 193K with 25% dust.Preliminary results:Variations in dust amount.Both slow-cooling and fast-cooling slabs display absorption bands at 500 nm due to the iron charge transfer and at 1500 and 2000 nm associated with water ice. Increasing the inclusion percentage in the mixtures resulted in a deepening of the 500 nm band and a weakening of 1500 and 2000 nm bands.Figure 4. VNIR and SWIR spectra of fast-cooling slabs varying the dust content.Variations in temperature.Considering that surface temperatures on the North Polar Cap varies from 148 K to 203 K, in winter and in summer respectively [8], we performed experiments within this range.The major spectral features keep their positions unchanged in both typologies of slabs. We recorded a general upward shift of the whole reflectance and the weakening of the absorption band at 1650 nm, with the increasing of the sample temperature. Figure 5. SWIR spectra of slow-cooling slab with 25% dust, varying the sample temperature.Variations due to different cooling methods.The spectra of the fast-cooling slabs have more marked spectral features in the whole wavelength range than the slow-cooling slabs spectra. This is probably due to the different procedures of sample preparation and cooling, that cause different crystal grainsize.Figure 6. SWIR spectra of fast-cooling and slow-cooling slabs with 15% dust at -90°C.Conclusions:The laboratory set-up presented in this work enables the imaging hyper-spectral acquisition of icy slabs at low temperatures. Moreover, icy slabs are probably more representative than granular ice of the exposed compact ice along the walls of the Martian North Polar Layered Deposits, as well as of the icy crust of small bodies in the outer Solar System. Additionally, the icy slabs allow us to incorporate up to 35% dust into the ice whereas granular ice preparation can not exceed 5% of dust content.Finally, we are now improving the laboratory set-up with the building of a cryo-genic cell, which allows us to reach even lower temperature and have a better control of the temperature and atmospheric environment during the experiments.References: [1] Byrne S. (2009) Annu. Rev. Earth. Planet. Sci., 37(1), 535-560, https://www.annualreviews.org/doi/pdf/10.1146/annurev.earth.031208.100101.[2] Viviano-Beck C. E. et al. (2014) J. Geophys. Res., 119(6), 1403-1431, https://doi.org/10.1002/2014JE004627.[3] Costa et al. (2024) Data in Brief, 57, https://doi.org/10.1016/j.dib.2024.111099.[4] Cannon K. M. et al. (2019) Icarus., 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019. [5] Peters et al. (2008) Icarus, 197, 470–479, https://doi.org/10.1016/j.icarus.2008.05.004.[6] Poulet, F. et al. (2009) Icarus 201(1), 69-83,...
- Open Access
- 15 May 2025
- Published by Copernicus GmbH
Hyper-spectral acquisitions of ice mixtures with Martian simulant at low temperatures
The remote sensing observation of ices and cryospheres in planets and satellites in our Solar System have been accompanied by studies on field analogs (e.g., Antarctica Cianfarra et al. 2022; Svalbard, Preston et Dartnell 2024;) and spectroscopy analysis of dusty ice mixtures in laboratory (e.g., Stephan et al. 2021, Yoldi et al. 2021).In this project, we used the Mars Global (MGS-1) High-Fidelity Martian Dirt Simulant (Cannon et al. 2019) to create artificial ice mixtures similar to the layer of the North Polar Cap on Mars and we acquired their spectra at low temperature. The spectral acquisitions were performed with the aim to compare the synthetic ice spectra with the ones collected by the NASA Compact Reconnaissance Imaging Spectrometer for Mars (CRISM; Zurek and Smrekar 2007) in the polar regions in order to quantify the content and understand the composition of the dust entrapped in the North polar deposits.The finest part (0-32 µm) of the simulant MGS-1 (Cannon et al. 2019) is spectrally representative of the atmospheric dust included in the polar strata.We mixed the simulant with deionized water in different ice/dust ratio to obtain mixtures from 0% to 35% dust. We cooled the mixtures at 193 K in a refrigerator or using liquid nitrogen and varying the freezing time from 1.30 h to 1 minute. Then, using Headwall Photonics Nano/Micro-Hyperspec cameras we acquired the reflectance spectra of different mixtures in a nitrogen controlled environment to avoid moisture and using a cooled sample-holder and a thermocouple to monitor the temperature increase during the acquisitions.Both the slabs created with slow and fast cooling show absorptions at 1500 and 2000 nm due to water ice and at 500 nm due to the iron content. However, the fast cooling slabs has well-defined absorption bands and shoulders whereas the slow cooling slabs show shallower bands. As expected with the increase of the simulant amount in the mixtures, the 500 nm-band deepens while the 1500 and 2000 nm-bands get shallower. The rise of the sample temperature resultes in an increase of the whole reflectance. The overall results are consistent with previous works on the granular icy mixtures (e.g., Stephan et al. 2021, Yoldi et al. 2021) although some relevant differences are recorded such as the shapes of the absorption bands and the reflectance.In conclusion, we developed a new set-up to acquire hyperspectral cubes of icy slabs that better represent the condition of exposed ice along Martian polar rupes as well as cuts, cliffs and walls of icy crust of planetary and small bodies of the outer Solar System.References: Cannon K. M. et al. (2019) Icarus, 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019.Cianfarra, P. et al. (2022) Tectonics, 4, 6, https://doi.org/10.1029/2021TC007124.Hauber, E. et al. (2011) Geol. Soc. Spec., 356, 111-131, https://doi.org/10.1144/SP356.7.Lalich D. E. et al. (2019) J. Geophys. Res. Planets, 124, 7, 1690-1703, https://doi.org/10.1029/2018JE005787.Spilker L. (2019) Science, 364, 6445, 1046-1051, https://www.science.org/doi/abs/10.1126/science.aat3760.Stephan, K. et al. (2021) Minerals, 11, https://doi.org/10.3390/min11121328.Yoldi, Z. et al. (2021) Icarus, 358, 114-169, https://doi.org/10.1016/j.icarus.2020.114169.Zurek R. W. and Smrekar S. E. (2007) J. Geophys. Res. Planets, 112, 5, 1-22, https://doi.org/10.1029/2006JE002701.
- 15 May 2025
- Published by Copernicus GmbH
Open AccessHyper-spectral acquisitions of ice mixtures with Martian simulant at low temperatures
The remote sensing observation of ices and cryospheres in planets and satellites in our Solar System have been accompanied by studies on field analogs (e.g., Antarctica Cianfarra et al. 2022; Svalbard, Preston et Dartnell 2024;) and spectroscopy analysis of dusty ice mixtures in laboratory (e.g., Stephan et al. 2021, Yoldi et al. 2021).In this project, we used the Mars Global (MGS-1) High-Fidelity Martian Dirt Simulant (Cannon et al. 2019) to create artificial ice mixtures similar to the layer of the North Polar Cap on Mars and we acquired their spectra at low temperature. The spectral acquisitions were performed with the aim to compare the synthetic ice spectra with the ones collected by the NASA Compact Reconnaissance Imaging Spectrometer for Mars (CRISM; Zurek and Smrekar 2007) in the polar regions in order to quantify the content and understand the composition of the dust entrapped in the North polar deposits.The finest part (0-32 µm) of the simulant MGS-1 (Cannon et al. 2019) is spectrally representative of the atmospheric dust included in the polar strata.We mixed the simulant with deionized water in different ice/dust ratio to obtain mixtures from 0% to 35% dust. We cooled the mixtures at 193 K in a refrigerator or using liquid nitrogen and varying the freezing time from 1.30 h to 1 minute. Then, using Headwall Photonics Nano/Micro-Hyperspec cameras we acquired the reflectance spectra of different mixtures in a nitrogen controlled environment to avoid moisture and using a cooled sample-holder and a thermocouple to monitor the temperature increase during the acquisitions.Both the slabs created with slow and fast cooling show absorptions at 1500 and 2000 nm due to water ice and at 500 nm due to the iron content. However, the fast cooling slabs has well-defined absorption bands and shoulders whereas the slow cooling slabs show shallower bands. As expected with the increase of the simulant amount in the mixtures, the 500 nm-band deepens while the 1500 and 2000 nm-bands get shallower. The rise of the sample temperature resultes in an increase of the whole reflectance. The overall results are consistent with previous works on the granular icy mixtures (e.g., Stephan et al. 2021, Yoldi et al. 2021) although some relevant differences are recorded such as the shapes of the absorption bands and the reflectance.In conclusion, we developed a new set-up to acquire hyperspectral cubes of icy slabs that better represent the condition of exposed ice along Martian polar rupes as well as cuts, cliffs and walls of icy crust of planetary and small bodies of the outer Solar System.References: Cannon K. M. et al. (2019) Icarus, 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019.Cianfarra, P. et al. (2022) Tectonics, 4, 6, https://doi.org/10.1029/2021TC007124.Hauber, E. et al. (2011) Geol. Soc. Spec., 356, 111-131, https://doi.org/10.1144/SP356.7.Lalich D. E. et al. (2019) J. Geophys. Res. Planets, 124, 7, 1690-1703, https://doi.org/10.1029/2018JE005787.Spilker L. (2019) Science, 364, 6445, 1046-1051, https://www.science.org/doi/abs/10.1126/science.aat3760.Stephan, K. et al. (2021) Minerals, 11, https://doi.org/10.3390/min11121328.Yoldi, Z. et al. (2021) Icarus, 358, 114-169, https://doi.org/10.1016/j.icarus.2020.114169.Zurek R. W. and Smrekar S. E. (2007) J. Geophys. Res. Planets, 112, 5, 1-22, https://doi.org/10.1029/2006JE002701.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Unravelling similarities between Mount Etna's pyroclastic deposits and the Lunar counterparts.
In the last few years, NASA, ESA, CNSA and JAXA have been planning comprehensive lunar initiatives, including the Artemis program. In this context, it is crucial to i) support scientific research aimed at improving our ability to collect direct ground-truth data and samples, and ii) test equipment and validate analytical methodologies at designated analogue sites. Among the sites of interest on the lunar surface are the ones dominated by pyroclastic deposits since, as shown on Apollo samples, they may have trapped considerable volumes of gases3, being their formation linked to the presence of volatiles within magma. This material represent an intriguing in-situ resource1 that has yet to be verified even considering studies on Earth analogues on volcanic environments. Some of them are well internationally-known (e.g., Lanzarote, Canary Islands4; Kilauea Volcano, USA; Lava Beds National Monument, USA) and have been extensively studied. In other cases, such as Mount Etna, the compositional similarity remains unexplored, despite the site has already attracted interest from the planetary science community2. Mount Etna volcano exhibits several geological similarities with lunar features such as the presence of lava tubes, cinder cones, lava channels and bowl shaped pits; however, its analogy from a compositional point of view has yet to be determined.For this reason, several unweathered and unaltered samples have been collected from a pyroclastic deposit in the area of the Cisternazza pit crater, a collapse pit located on the southern flank of Mount Etna. The samples underwent comprehensive chemical and mineralogical characterization, revealing compositional similarities with lunar samples. Consequently, further tests were conducted to examine their mechanical, thermal, and spectral behaviour to compare it with lunar samples and certified lunar simulants across a broader range of properties.To assess the analogy with the lunar surface, specific spectral parameters were also calculated for both the Etna samples and key sites on the Moon. In addition, in order to resemble the complex spectral response of the lunar pyroclastic deposits, we generated different mixtures using the spectra of the Etna samples intermixed with different amounts of olivine, orthopyroxene, and clinopyroxene endmembers spectra. Intriguing correlations between these mixtures and lunar spectral data were observed, even in study areas far from Apollo landing sites, indicating a broader range of similarities with the lunar pyroclastic materials.AcknowledgementThis study was carried out within the Space It Up project funded by the Italian Space Agency, ASI, and the Ministry of University and Research, MUR, under contract n. 2024-5-E.0 - CUP n. I53D24000060005.References1: Anand et al., 2012, A brief review of chemical and mineralogical resources on the Moon and likely initial in situ resource utilization (ISRU) applications. Planet. Space Sci. 74, 42–48.2: Carey et al., 2022, METERON Analog-1: A Touch Remote. 73rd International Astronautical Congress (IAC), Paris, France, 18–22 September 20223: Ivanov, 2014, Volatiles in lunar regolith samples: A survey. Sol. Syst. Res. 48, 113–129.4: Mateo et al., 2019, Lanzarote and Chinijo Islands Geopark:From Earth to Space. Springer International Publishing.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessUnravelling similarities between Mount Etna's pyroclastic deposits and the Lunar counterparts.
In the last few years, NASA, ESA, CNSA and JAXA have been planning comprehensive lunar initiatives, including the Artemis program. In this context, it is crucial to i) support scientific research aimed at improving our ability to collect direct ground-truth data and samples, and ii) test equipment and validate analytical methodologies at designated analogue sites. Among the sites of interest on the lunar surface are the ones dominated by pyroclastic deposits since, as shown on Apollo samples, they may have trapped considerable volumes of gases3, being their formation linked to the presence of volatiles within magma. This material represent an intriguing in-situ resource1 that has yet to be verified even considering studies on Earth analogues on volcanic environments. Some of them are well internationally-known (e.g., Lanzarote, Canary Islands4; Kilauea Volcano, USA; Lava Beds National Monument, USA) and have been extensively studied. In other cases, such as Mount Etna, the compositional similarity remains unexplored, despite the site has already attracted interest from the planetary science community2. Mount Etna volcano exhibits several geological similarities with lunar features such as the presence of lava tubes, cinder cones, lava channels and bowl shaped pits; however, its analogy from a compositional point of view has yet to be determined.For this reason, several unweathered and unaltered samples have been collected from a pyroclastic deposit in the area of the Cisternazza pit crater, a collapse pit located on the southern flank of Mount Etna. The samples underwent comprehensive chemical and mineralogical characterization, revealing compositional similarities with lunar samples. Consequently, further tests were conducted to examine their mechanical, thermal, and spectral behaviour to compare it with lunar samples and certified lunar simulants across a broader range of properties.To assess the analogy with the lunar surface, specific spectral parameters were also calculated for both the Etna samples and key sites on the Moon. In addition, in order to resemble the complex spectral response of the lunar pyroclastic deposits, we generated different mixtures using the spectra of the Etna samples intermixed with different amounts of olivine, orthopyroxene, and clinopyroxene endmembers spectra. Intriguing correlations between these mixtures and lunar spectral data were observed, even in study areas far from Apollo landing sites, indicating a broader range of similarities with the lunar pyroclastic materials.AcknowledgementThis study was carried out within the Space It Up project funded by the Italian Space Agency, ASI, and the Ministry of University and Research, MUR, under contract n. 2024-5-E.0 - CUP n. I53D24000060005.References1: Anand et al., 2012, A brief review of chemical and mineralogical resources on the Moon and likely initial in situ resource utilization (ISRU) applications. Planet. Space Sci. 74, 42–48.2: Carey et al., 2022, METERON Analog-1: A Touch Remote. 73rd International Astronautical Congress (IAC), Paris, France, 18–22 September 20223: Ivanov, 2014, Volatiles in lunar regolith samples: A survey. Sol. Syst. Res. 48, 113–129.4: Mateo et al., 2019, Lanzarote and Chinijo Islands Geopark:From Earth to Space. Springer International Publishing.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
High-resolution sedimentological and palaeoceanographic investigation of the Last Glacial Termination (T1) recorded on the western margin of the Svalbard (Arctic)
The Last Glacial Maximum (LGM) was defined based on the low stand sea-level records from the most recent period when global ice sheets reached their maximum volume, between 26,500 and 19,000 years before present. The end of this cold period was the last glacial termination (T1), occurred between 20 and 11.7 ka BP marking the transition to the current interglacial. During T1, the sea level rise responded to a variety of processes although the melting of the world widely distributed ice sheets was initially the main contributor and responsible for abrupt relative sea level rises known as meltwater pulses (MWPs) that deeply changed the Earth’s physiography. MWPs are short-lived global acceleration in sea-level rise resulting from intense glacial melting, surge of large ice streams into oceans and intense iceberg discharge during ice sheet disintegration. Nowadays, the main concerns related to the present fast global climate change is the possibility that sudden drastic ice loss from the Greenland and/or in the West Antarctic Ice Sheet would lead to a new abrupt acceleration of the relative sea level with consequent inundation of vast coastal areas and/or to cause an abrupt slowdown of the Atlantic Meridional Overturning Circulation (i.e. Golledge et al., 2019). To better understand the dynamics and risks associated with the onset of those events, their impact on thermohaline ocean circulation and climate it is pivotal the study of the well-preserved polar marine sediment records of the events occurred during the T1. Here, we present the results of a high-resolution sedimentological, micropaleontological and geochemical investigation of 3 sediment cores collected on the western margin of Svalbard and eastern side of the Fram Strait (Artic). The sediment cores were collected between 1322 m and 1725 m of water depth, in correspondence of the southern IODP sites that will be drilled during the IODP Exp-403 (June-August 2024).
- 20 January 2025
- Published by Copernicus GmbH
Open AccessHigh-resolution sedimentological and palaeoceanographic investigation of the Last Glacial Termination (T1) recorded on the western margin of the Svalbard (Arctic)
The Last Glacial Maximum (LGM) was defined based on the low stand sea-level records from the most recent period when global ice sheets reached their maximum volume, between 26,500 and 19,000 years before present. The end of this cold period was the last glacial termination (T1), occurred between 20 and 11.7 ka BP marking the transition to the current interglacial. During T1, the sea level rise responded to a variety of processes although the melting of the world widely distributed ice sheets was initially the main contributor and responsible for abrupt relative sea level rises known as meltwater pulses (MWPs) that deeply changed the Earth’s physiography. MWPs are short-lived global acceleration in sea-level rise resulting from intense glacial melting, surge of large ice streams into oceans and intense iceberg discharge during ice sheet disintegration. Nowadays, the main concerns related to the present fast global climate change is the possibility that sudden drastic ice loss from the Greenland and/or in the West Antarctic Ice Sheet would lead to a new abrupt acceleration of the relative sea level with consequent inundation of vast coastal areas and/or to cause an abrupt slowdown of the Atlantic Meridional Overturning Circulation (i.e. Golledge et al., 2019). To better understand the dynamics and risks associated with the onset of those events, their impact on thermohaline ocean circulation and climate it is pivotal the study of the well-preserved polar marine sediment records of the events occurred during the T1. Here, we present the results of a high-resolution sedimentological, micropaleontological and geochemical investigation of 3 sediment cores collected on the western margin of Svalbard and eastern side of the Fram Strait (Artic). The sediment cores were collected between 1322 m and 1725 m of water depth, in correspondence of the southern IODP sites that will be drilled during the IODP Exp-403 (June-August 2024).
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
A multiproxies paleoclimatic study of lacustrine sediment from the Castiglione maar drilling (central Italy): first insight of the AMUSED Project.
The AMUSED project (A MUltidisciplinary Study of past global climatE changes from continental and marine archives in the MeDiterranean region, https://progetti.ingv.it/index.php/it/amused) aims at improving knowledge of middle-late Quaternary climate variability by integrating paleoclimate multi-proxy data acquired in different geological settings of the Mediterranean region. In this context, we investigate the Castiglione maar, Colli Albani volcanic district in central Italy, for acquiring a high-resolution and geochronologically well-constrained multi-proxy record of the lacustrine succession. After geophysical exploration, two parallel 116 m- and 126.5 m-long sediment successions were recovered from the central sector of the basin. The sedimentary infilling mainly consists of fine sand, silt and clay, with minor gravel intervals and numerous tephras mostly deriving from explosive eruptions of the Roman Province volcanoes such as Mt. Vulsini, Vico, Mt. Sabatini and Alban Hills. More than fifty visible volcanic layers were identified and used, together with some lithostratigraphic features, for correlating the two parallel cores and build up a composite sediment section of 131.2 m in length. The geochemical fingerprinting of some key tephra layers allowed to establish a preliminary chronological framework for the Castiglione succession spanning the last 365 ka, with a mean sedimentation rate of 0.33 mm/yr. High resolution X-ray Fluorescence scanning was acquired at 2.5 mm intervals on the composite section and will be used, along with preliminary results from total inorganic and organic carbon, δ18O-δ14C and ostracods analyses, for paleoenvironmental reconstructions.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessA multiproxies paleoclimatic study of lacustrine sediment from the Castiglione maar drilling (central Italy): first insight of the AMUSED Project.
The AMUSED project (A MUltidisciplinary Study of past global climatE changes from continental and marine archives in the MeDiterranean region, https://progetti.ingv.it/index.php/it/amused) aims at improving knowledge of middle-late Quaternary climate variability by integrating paleoclimate multi-proxy data acquired in different geological settings of the Mediterranean region. In this context, we investigate the Castiglione maar, Colli Albani volcanic district in central Italy, for acquiring a high-resolution and geochronologically well-constrained multi-proxy record of the lacustrine succession. After geophysical exploration, two parallel 116 m- and 126.5 m-long sediment successions were recovered from the central sector of the basin. The sedimentary infilling mainly consists of fine sand, silt and clay, with minor gravel intervals and numerous tephras mostly deriving from explosive eruptions of the Roman Province volcanoes such as Mt. Vulsini, Vico, Mt. Sabatini and Alban Hills. More than fifty visible volcanic layers were identified and used, together with some lithostratigraphic features, for correlating the two parallel cores and build up a composite sediment section of 131.2 m in length. The geochemical fingerprinting of some key tephra layers allowed to establish a preliminary chronological framework for the Castiglione succession spanning the last 365 ka, with a mean sedimentation rate of 0.33 mm/yr. High resolution X-ray Fluorescence scanning was acquired at 2.5 mm intervals on the composite section and will be used, along with preliminary results from total inorganic and organic carbon, δ18O-δ14C and ostracods analyses, for paleoenvironmental reconstructions.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
High-resolution multi proxy records across the Plio-Pleistocene boundary: a central Mediterranean perspective
The central Mediterranean region is traditionally acknowledged as a key reference area for investigating the Northern Hemisphere climate variability over the last few million years.Specifically, the expanded and highly fossiliferous open-marine succession currently exposed along the shoreline of Southern Italy and Sicily offers a pristine sedimentary record of the Neogene to Quaternary interval, which can be tightly constrained in time and deeply investigated by means of a manifold array of paleoenvironmental and paleoclimatic proxies (e.g., Cita et al., 2008; Capraro et al., 2017, 2022). In this context, the Monte San Nicola (MSN) section, located in Southern Sicily, provides an exceptional stratigraphic record for studying the climate evolution throughout the Piacenzian to Gelasian interval. The MSN succession hosts the GSSP for the Gelasian Stage (ca. 2.58 Ma; Rio et al., 1998), which presently marks the base of both the Pleistocene Serie and the Quaternary System (Head et al., 2008). The section is currently under revision, especially in the interval straddling the Gelasian GSSP, which includes the definitive establishment of the Northern Hemisphere Glaciation (NHG), at around 2.6 Ma. This cooling event is marked by a triplet of glacial stages (i.e., MIS 100, 98 and 96) that are found just above the Piacenzian-Gelasian boundary.In the wake of the emerging interest towards the MSN section, we are currently committed to reconstructing a high-resolution multi-proxy record (foraminiferal δ18O and δ13C, Alkenones-derived SSTs, C37total and Alcoholic index) in the lower part of the “Mandorlo” section at MSN (Capraro et al., 2022; Zanola et al., 2024). Results achieved so far provide new insights on the paleoceanographic and paleoclimatic evolution of the central Mediterranean at the sub-orbital scale at the beginning of the NHG.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessHigh-resolution multi proxy records across the Plio-Pleistocene boundary: a central Mediterranean perspective
The central Mediterranean region is traditionally acknowledged as a key reference area for investigating the Northern Hemisphere climate variability over the last few million years.Specifically, the expanded and highly fossiliferous open-marine succession currently exposed along the shoreline of Southern Italy and Sicily offers a pristine sedimentary record of the Neogene to Quaternary interval, which can be tightly constrained in time and deeply investigated by means of a manifold array of paleoenvironmental and paleoclimatic proxies (e.g., Cita et al., 2008; Capraro et al., 2017, 2022). In this context, the Monte San Nicola (MSN) section, located in Southern Sicily, provides an exceptional stratigraphic record for studying the climate evolution throughout the Piacenzian to Gelasian interval. The MSN succession hosts the GSSP for the Gelasian Stage (ca. 2.58 Ma; Rio et al., 1998), which presently marks the base of both the Pleistocene Serie and the Quaternary System (Head et al., 2008). The section is currently under revision, especially in the interval straddling the Gelasian GSSP, which includes the definitive establishment of the Northern Hemisphere Glaciation (NHG), at around 2.6 Ma. This cooling event is marked by a triplet of glacial stages (i.e., MIS 100, 98 and 96) that are found just above the Piacenzian-Gelasian boundary.In the wake of the emerging interest towards the MSN section, we are currently committed to reconstructing a high-resolution multi-proxy record (foraminiferal δ18O and δ13C, Alkenones-derived SSTs, C37total and Alcoholic index) in the lower part of the “Mandorlo” section at MSN (Capraro et al., 2022; Zanola et al., 2024). Results achieved so far provide new insights on the paleoceanographic and paleoclimatic evolution of the central Mediterranean at the sub-orbital scale at the beginning of the NHG.
- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Laboratory hyperspectral analysis of icy mixtures with Martian Simulants
Introduction:The layers of the Martian North Polar Layered Deposits (NPLD) are composed mainly of water ice and variable content of lithic inclusions probably because of astronomical parameters and thus climate variations. These variations are the causes of compositional and physical differences among polar layers [1], that could be detected by instruments onboard spacecraft. An example could be the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the NASA Mars Reconnaissance Orbiter (MRO). CRISM instrument is a spectrometer to study the composition of the whole Mars surface [2]. It works in a spectral range from 400 to 4000 nm, with a spectral sampling of 6.55 nm/channel and a spatial resolution of 18.4 m/px. Spectra acquired on the polar deposits can be compared with laboratory icy analogs. Therefore, in this work, we tried to retrieve the composition and the amount of dust included in the layers of the upper part of the North Polar Layered Deposits (NPLD). Martian Simulants:We analyzed Martian simulants that were commercially available in order to characterize deeply their compositions before any analysis:Mars Global High-Fidelity Martian Dirt Simulant (MGS-1): average composition of Mars [3]; Mojave Mars Simulant (MMS-1): composition regolith of Phoenix landing site [4]; Enhanced Mars Simulant (MMS-2): evolution of MMS-1 [4]. The chemical characterization was done using the Inductively Coupled Plasma Mass Spectroscopy, the mineralogical analysis was performed by X-ray diffraction (and SEM-EBS only for MGS-1 coarse grains) and the grainsize was studied through the Laser Diffraction Particle Size Analyzer. We used the finest grains (0-32 µm) of the simulant MGS-1 because it has spectral behavior similar to the atmospheric dust that could be entrapped in the polar layers [5]. Icy slabs:We mixed a specific quantity of MGS-1 with deionized water to recreate the composition of the polar layers (e.g., see [6]). We froze the mixture at -80°C like the summer temperature at the Martian North Pole [7] or instantaneously in liquid nitrogen. The resulting icy slab was extremely narrow to avoid the precipitation and thus the separation between simulant and water ice. They have been acquired in the VNIR-SWIR range by hyperspectral imaging cameras. We tested the spectral variation with:variation in dust/ice ratio; increase of temperature; different freezing times and methods. Laboratory set-up:The accommodation stage of the Headwall Photonics Nano Hyperspec VNIR camera and the Micro Hyperspec SWIR camera was adapted to allow the hyperspectral acquisition of icy mixtures (Figure 1). The icy samples were placed over a cold holder, whose temperature was controlled by a thermocouple. We worked in nitrogen atmosphere to avoid the formation of condensation over the sample.Figure 1. Hyperspectral camera and its modified stage to acquire spectra of icy slabs. Preliminary results:The 400-1000 nm spectra of the icy slabs are characterized by absorption bands of the iron contained in the simulant. These absorption bands increase their depth increasing the amount of dust in the mixture. The 1000-2500 nm spectra are characterized by absorption bands of the water ice, that become deeper with the decrease of dust content [7] (Figure 2). The temperature causes a general shift of the spectrum upwards [8].Figure 2. Spectra in the range from 400 to 2500 nm of mixtures with different concentrations of MGS-1. Conclusions:The laboratory set-up presented in this work is easy to build and the procedure is easy to replicate. All preliminary results are comparable with what is found in literature. Instead of ice grains, we have produced and analyzed icy slabs that could contain more than 30% dust. Moreover, icy slabs could be similar to polar layers instead of a simple mixture of powder and snow.We plan to perform more detailed spectral analysis of icy mixtures eventually using other instruments (e.g., see [9]). References: [1] Byrne S. (2009) Annu. Rev. Earth. Planet. Sci., 37(1), 535-560, https://www.annualreviews.org/doi/pdf/10.1146/annurev.earth.031208.100101.[2] Viviano-Beck C. E. et al. (2014) J. Geophys. Res., 119(6), 1403-1431, https://doi.org/10.1002/2014JE004627.[3] Cannon K. M. et al. (2019) Icarus., 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019.[4] Peters et al. (2008) Icarus, 197, 470–479, https://doi.org/10.1016/j.icarus.2008.05.004.[5] Costa et al. (2024) Data in Brief, submitted.[6] Smith I. B. (2019) Geophys. Res. Lett., 48(15), https://doi.org/10.1029/2021GL093618.[7] Horne D. et Smith M. D. (2009) Icarus 200(1), 118-128, https://doi.org/10.1016/j.icarus.2008.11.007.[8] Yoldi Z. Et al. (2021) Icarus, 358, https://doi.org/10.1016/j.icarus.2020.114169.[9] Brissaud O. et al. (2004) Appl. Opt. 43(9), 1926-1937, https://doi.org/10.1364/AO.43.001926.
- 3 July 2024
- Published by Copernicus GmbH
Open AccessLaboratory hyperspectral analysis of icy mixtures with Martian Simulants
Introduction:The layers of the Martian North Polar Layered Deposits (NPLD) are composed mainly of water ice and variable content of lithic inclusions probably because of astronomical parameters and thus climate variations. These variations are the causes of compositional and physical differences among polar layers [1], that could be detected by instruments onboard spacecraft. An example could be the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the NASA Mars Reconnaissance Orbiter (MRO). CRISM instrument is a spectrometer to study the composition of the whole Mars surface [2]. It works in a spectral range from 400 to 4000 nm, with a spectral sampling of 6.55 nm/channel and a spatial resolution of 18.4 m/px. Spectra acquired on the polar deposits can be compared with laboratory icy analogs. Therefore, in this work, we tried to retrieve the composition and the amount of dust included in the layers of the upper part of the North Polar Layered Deposits (NPLD). Martian Simulants:We analyzed Martian simulants that were commercially available in order to characterize deeply their compositions before any analysis:Mars Global High-Fidelity Martian Dirt Simulant (MGS-1): average composition of Mars [3]; Mojave Mars Simulant (MMS-1): composition regolith of Phoenix landing site [4]; Enhanced Mars Simulant (MMS-2): evolution of MMS-1 [4]. The chemical characterization was done using the Inductively Coupled Plasma Mass Spectroscopy, the mineralogical analysis was performed by X-ray diffraction (and SEM-EBS only for MGS-1 coarse grains) and the grainsize was studied through the Laser Diffraction Particle Size Analyzer. We used the finest grains (0-32 µm) of the simulant MGS-1 because it has spectral behavior similar to the atmospheric dust that could be entrapped in the polar layers [5]. Icy slabs:We mixed a specific quantity of MGS-1 with deionized water to recreate the composition of the polar layers (e.g., see [6]). We froze the mixture at -80°C like the summer temperature at the Martian North Pole [7] or instantaneously in liquid nitrogen. The resulting icy slab was extremely narrow to avoid the precipitation and thus the separation between simulant and water ice. They have been acquired in the VNIR-SWIR range by hyperspectral imaging cameras. We tested the spectral variation with:variation in dust/ice ratio; increase of temperature; different freezing times and methods. Laboratory set-up:The accommodation stage of the Headwall Photonics Nano Hyperspec VNIR camera and the Micro Hyperspec SWIR camera was adapted to allow the hyperspectral acquisition of icy mixtures (Figure 1). The icy samples were placed over a cold holder, whose temperature was controlled by a thermocouple. We worked in nitrogen atmosphere to avoid the formation of condensation over the sample.Figure 1. Hyperspectral camera and its modified stage to acquire spectra of icy slabs. Preliminary results:The 400-1000 nm spectra of the icy slabs are characterized by absorption bands of the iron contained in the simulant. These absorption bands increase their depth increasing the amount of dust in the mixture. The 1000-2500 nm spectra are characterized by absorption bands of the water ice, that become deeper with the decrease of dust content [7] (Figure 2). The temperature causes a general shift of the spectrum upwards [8].Figure 2. Spectra in the range from 400 to 2500 nm of mixtures with different concentrations of MGS-1. Conclusions:The laboratory set-up presented in this work is easy to build and the procedure is easy to replicate. All preliminary results are comparable with what is found in literature. Instead of ice grains, we have produced and analyzed icy slabs that could contain more than 30% dust. Moreover, icy slabs could be similar to polar layers instead of a simple mixture of powder and snow.We plan to perform more detailed spectral analysis of icy mixtures eventually using other instruments (e.g., see [9]). References: [1] Byrne S. (2009) Annu. Rev. Earth. Planet. Sci., 37(1), 535-560, https://www.annualreviews.org/doi/pdf/10.1146/annurev.earth.031208.100101.[2] Viviano-Beck C. E. et al. (2014) J. Geophys. Res., 119(6), 1403-1431, https://doi.org/10.1002/2014JE004627.[3] Cannon K. M. et al. (2019) Icarus., 317, 470–478, https://doi.org/10.1016/j.icarus.2018.08.019.[4] Peters et al. (2008) Icarus, 197, 470–479, https://doi.org/10.1016/j.icarus.2008.05.004.[5] Costa et al. (2024) Data in Brief, submitted.[6] Smith I. B. (2019) Geophys. Res. Lett., 48(15), https://doi.org/10.1029/2021GL093618.[7] Horne D. et Smith M. D. (2009) Icarus 200(1), 118-128, https://doi.org/10.1016/j.icarus.2008.11.007.[8] Yoldi Z. Et al. (2021) Icarus, 358, https://doi.org/10.1016/j.icarus.2020.114169.[9] Brissaud O. et al. (2004) Appl. Opt. 43(9), 1926-1937, https://doi.org/10.1364/AO.43.001926.
- 21 December 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 324
High-resolution climate variability across the Piacenzian/Gelasian boundary in the Monte San Nicola section (Sicily, Italy)
- 21 December 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 324
High-resolution climate variability across the Piacenzian/Gelasian boundary in the Monte San Nicola section (Sicily, Italy)
- Open Access
- 12 August 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 316
Eccentricity signal in the nannofossil time-series across the Mid-Pleistocene Transition in the northwestern Pacific Ocean (ODP Site 1209)
- 12 August 2023
- Published by Elsevier in Quaternary Science Reviews
- Vol. 316
Open AccessEccentricity signal in the nannofossil time-series across the Mid-Pleistocene Transition in the northwestern Pacific Ocean (ODP Site 1209)