YFYan Feng

Yan Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yan Feng has a total of 461 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Energy Exascale Earth System Model version 3: 3. Overview of historical and near-future large ensemble

    by Wuyin Lin, Shixuan Zhang, Jean-Christophe Golaz, Xue Zheng, Andrew Roberts, Shaocheng Xie, Yan Feng, Salil Mahajan, Luke P. Van Roekel, James J Benedict, et al.

    This manuscript documents and evaluates the Energy Exascale Earth System Model version 3 initial-condition large ensemble (E3SMv3-LE), a new community resource designed to support studies of forced responses, internal variability, extremes, and coupled Earth system processes. The ensemble consists of 25 fully coupled simulations spanning 1850-2050, using CMIP6 historical forcings through 2014 and the SSP2-4.5 scenario thereafter. We provide an overview of the simulation behavior across the atmosphere, land, ocean, and cryosphere. The analysis first examines the historical and near-future evolution of key coupled-system indicators under the influences of external forcings, which shows coherent responses across the components. We then assess historical changes in mean state and ensemble spread, and place E3SMv3 performance in the context of CMIP6 model behavior. The manuscript further characterizes simulated extremes, including trends in surface temperature extremes, time of emergence of persisting extreme heat, probability estimation of regional heatwave events and their change over time, and drought trend. Finally, we evaluate major modes of variability and teleconnections, including extratropical modes, ENSO and other tropical variability, with emphasis on both historical fidelity and near-future change. Overall, the simulation performance of E3SMv3-LE is on par with the leading CMIP6 models in these broad-based metrics. The large ensemble provides a physically consistent, multi-component framework for quantifying forced responses and the role of internal variability through mid-century. By documenting the simulations, and evaluating their strengths and limitations, this manuscript establishes E3SMv3-LE as a resource for broader community use in Earth system variability, changes, impacts, and predictability research.

  • Open Access

    Comment on egusphere-2026-5932

    by Xiaojian Zheng, Yan Feng, David Painemal, Shaocheng Xie, Zhujun Li, Yuan Wang

    The adjustment of cloud liquid water path (LWP) to droplet number concentration (Nd) remains a leading uncertainty in the aerosol-induced cloud radiative effect. We combine nine years (2006–2014) of collocated, vertically resolved CALIOP aerosol extinction and MODIS cloud retrievals over the southeastern Atlantic around Ascension Island, and partition the meteorology into three weather regimes (weakened-high, background, and strengthened-high) with a deep-learning clustering of ERA5 circulation, to quantify the LWP adjustment to droplet concentration (L0) by regime and by aerosol vertical placement relative to the cloud top. In the strengthened-high regime, which encompasses the smoky dry season, increasing separated free-tropospheric aerosol steepens L0 from −0.07 to −0.31, as the shortwave absorption of smoke aerosol enhances the inversion that caps the cloud. This steepening persists despite the moisture co-transported with the plume, which partly offsets the entrainment-driven loss of cloud water. Contacting absorbing aerosol thins the cloud in both the strengthened-high and background regimes, but the LWP–Nd coupling weakens toward zero in the humid background regime. Combining all days without regime distinction weakens both signals. In contrast, the nudged Energy Exascale Earth System Model version 2 (E3SMv2) produces a uniformly positive LWP adjustment to Nd across the regimes and aerosol placements, consistent with a precipitation-suppression response. We suggest that cloud-water adjustments in smoke-topped stratocumulus be quantified by weather regime and with vertically resolved aerosol predictors, and that the rain-mass state and sub-cloud updraft in E3SMv2 be calibrated before the simulated adjustments are used to constrain aerosol forcing.

  • Open Access

    Regime-dependent impacts of aerosol vertical placement on liquid water path adjustment in southeastern Atlantic marine boundary layer clouds

    by Xiaojian Zheng, Yan Feng, David Painemal, Shaocheng Xie, Zhujun Li, Yuan Wang

    The adjustment of cloud liquid water path (LWP) to droplet number concentration (Nd) remains a leading uncertainty in the aerosol-induced cloud radiative effect. We combine nine years (2006–2014) of collocated, vertically resolved CALIOP aerosol extinction and MODIS cloud retrievals over the southeastern Atlantic around Ascension Island, and partition the meteorology into three weather regimes (weakened-high, background, and strengthened-high) with a deep-learning clustering of ERA5 circulation, to quantify the LWP adjustment to droplet concentration (L0) by regime and by aerosol vertical placement relative to the cloud top. In the strengthened-high regime, which encompasses the smoky dry season, increasing separated free-tropospheric aerosol steepens L0 from −0.07 to −0.31, as the shortwave absorption of smoke aerosol enhances the inversion that caps the cloud. This steepening persists despite the moisture co-transported with the plume, which partly offsets the entrainment-driven loss of cloud water. Contacting absorbing aerosol thins the cloud in both the strengthened-high and background regimes, but the LWP–Nd coupling weakens toward zero in the humid background regime. Combining all days without regime distinction weakens both signals. In contrast, the nudged Energy Exascale Earth System Model version 2 (E3SMv2) produces a uniformly positive LWP adjustment to Nd across the regimes and aerosol placements, consistent with a precipitation-suppression response. We suggest that cloud-water adjustments in smoke-topped stratocumulus be quantified by weather regime and with vertically resolved aerosol predictors, and that the rain-mass state and sub-cloud updraft in E3SMv2 be calibrated before the simulated adjustments are used to constrain aerosol forcing.

  • Open Access

    Bridging Particle-Resolved and Global Scales: Online Emulation of Aerosol Mixing State in E3SMv3 and Its Impacts on CCN and Cloud Droplet Number

    by Xiaojian Zheng, Yan Feng, Jiwen Fan, Yunpeng Shan, Tao Zhang, Bethany Lusch, Nicole Riemer

    Aerosol mixing state, the distribution of chemical species among individual particles, influences hygroscopicity, cloud condensation nuclei (CCN) activity, and droplet activation. Most global models assume complete internal mixing within each aerosol mode. We present the online integration of a machine-learning mixing state emulator into the Energy Exascale Earth System Model version 3 (E3SMv3). The XGBoost-based emulator, trained on particle-resolved PartMC-MOSAIC simulations, predicts two entropy-based indices at each time step, quantifying the mixing of black carbon (BC) with all other accumulation-size species and between hydrophobic and hydrophilic species. Each index is mapped to a two-subpopulation representation of the accumulation mode, with distinct hygroscopicities, for the activation calculation. In AMIP-style diagnostic and interactive simulations, the emulator diagnoses substantially more external mixing than the default assumption, reducing the surface-mean BC index from ~0.90 to ~0.60 and the hydrophobic index from ~0.95 to ~0.41. The BC mixing state has negligible CCN impact (<0.1%), whereas the hydrophobic–hydrophilic mixing state reduces global-mean CCN by ~5.5%, exceeding 10–20% over dust-influenced regions. A semi-quantitative comparison shows the emulator moving the BC coating ratio toward single-particle observations at all 22 sites, with error reductions of 11–88%. Against reanalysis-derived CCN, the emulator reduces the bias where the internal-mixing assumption most overestimates aerosol hygroscopicity and improves the spatial correlation. The interactive simulations shift regional in-cloud droplet number distributions toward MODIS retrievals, most coherently over the Southern Ocean and marine stratocumulus regions. Mixing state emulators trained on particle-resolved simulations thus offer a transferable framework for improving aerosol representation in global models.

  • Open Access

    Overview of Aerosols in the E3SM Version 3: New Model Features and Their Impacts

    by Hailong Wang, Mingxuan Wu, Ziming Ke, Yan Feng, Manish Shrivastava, Qi Tang, Hui Wan, Xiaohong Liu, Richard C. Easter, Wuyin Lin, et al.

    Accurate and comprehensive representation of aerosols in Earth system models (ESMs) is critical for modeling radiative forcing and seasonal‐to‐decadal variability. With increasing computing power, detailed physical and chemical processes representing aerosols and their interactions with other components of the Earth system can be treated more explicitly and accurately in ESMs. Like many other ESMs, the U.S. DOE Energy Exascale Earth System Model (E3SM) versions 1 and 2 have a state‐of‐the‐art treatment of major aerosol species but crudely treat or even neglect some aerosol components that become increasingly important in the future with decreasing sulfur emissions. Several science‐driven model developments of new aerosol features, including an explicit treatment of nitrate and ammonium aerosol species using MOSAIC coupled with the chemUCI gas chemistry scheme, explicit secondary organic aerosol (SOA) formation and loss, prognostic stratospheric sulfate (using chemical, microphysical and optical treatments instead of prescribing optical properties for volcanic aerosol), improved convective wet removal, improved numerical coupling of aerosol processes (i.e., emission, dry deposition, and turbulent mixing), and a new dust particle emission scheme, have been included in E3SM version 3 (E3SMv3) to better capture their roles in the Earth system. These new aerosol developments also require coupling with relatively comprehensive atmospheric chemistry to represent the reactions involving precursor gases and oxidants. Besides the new modeling capabilities, the aerosol improvements (e.g., SOA and dust lifetime and spatial distribution) contribute to E3SMv3's better performance in reproducing the historical temperature trends and enable the model to better project near‐future Earth system changes.

  • Open Access

    Model Sensitivities of Biomass‐Burning Aerosol Chemical Aging, Sulfate Formation, and Cloud Droplet Activation in the Southeastern Atlantic Using CESM and E3SM

    by Calvin Howes, Pablo Saide, Mary Barth, Yan Feng, Jens Redemann, Arthur J. Sedlacek, Manish Shrivastava, Wenfu Tang, Rob Wood, Maria Zawadowicz, et al.

    Biomass‐burning smoke drives large uncertainty in climate projections of the Earth's radiative balance. This is due to the chemical and physical evolution of smoke and its impact on clouds and radiation. Here we focus on the southeastern Atlantic region and its inflow of African biomass‐burning smoke during August 2017. We evaluate smoke properties and processes in two coupled earth‐system models, the Energy Exascale Earth System Model (E3SM) and Community Earth System Model (CESM). These are compared against in situ aircraft observations from two field campaigns, ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) and CLoud–Aerosol–Radiation Interaction and Forcing: Year 2017 (CLARIFY‐2017). Observations reveal an increase and subsequent decrease in smoke mean diameter, and a steady decrease in the mass ratio of organic aerosol (OA) to black carbon aerosol (BC) (OA:BC) over 4–12 days of aging, neither captured by the base models. Implementation of a photolytic loss scheme for secondary organic aerosol (SOA)—as a proxy for other heterogeneous volatilization chemistry—and a ∼1‐day conversion for primary OA to SOA significantly improves the representation of this loss. In the boundary layer, both models show dimethyl sulfide driving a large increase in the sulfate aerosol mass fraction from the free troposphere, which is consistent with observations. Finally, models tend to underpredict cloud droplet number concentration partially due to weak modeled turbulent updraft strength, and model performance improves when the parameterized turbulent updraft strength is increased substantially. These results are expected to provide insights into future model development to reduce climate model uncertainties.

  • Open Access

    Advancing the quantification of aerosol-cloud interactions with the CALIPSO-CloudSat-Aqua/MODIS record

    by Zhujun Li, David Painemal, Yan Feng, Xiaojian Zheng

    Aerosol-cloud-precipitation interactions are assessed over the non-polar ocean using more than 11 years of combined Aqua-MODIS, CALIPSO-CALIOP, and CloudSat products. The analysis first shows the benefit of incorporating vertically resolved aerosol extinction coefficient (σext) in aerosol-cloud interactions (ACI) assessments, demonstrating that: σext vertically collocated with the cloud layer (σextCL) correlates best with cloud droplet number concentration (Nd), column-integrated aerosol optical depth (AOD) cannot explain the Nd variability in the extratropics, and the S-shape of the AOD-Nd relationship reported in previous studies is not replicated when using σextCL instead of AOD, with a Nd-σextCL linearity more consistent with in-situ studies over the ocean. ACI metric, estimated as the log-scale regression between CALIOP σextCL and MODIS Nd reveals that the eastern Pacific is the region with the strongest ACI, followed by the Southern Ocean. The susceptibility of clouds to changes in their liquid water path (LWP) and frequency of precipitation followed a 2-step calculation by combining the Nd-σextCL regression (ACI) with the regression between these macrophysical variables and Nd. LWP susceptibility is negative (LWP decreases with aerosol loading) and statistically significant over the eastern Pacific, eastern Atlantic, and extratropics. In contrast, vast areas of the tropical and subtropical ocean feature negligible changes in LWP with aerosol. Precipitation frequency susceptibility is negative, but the values are only significant over the coastal eastern Pacific and Atlantic. The findings suggest that previous modeling assessments relying on AOD may need to be revisited by taking advantage of the synergy between passive and active sensors.


  • Top Cited Papers
    Open Access

    The Energy Exascale Earth System Model Version 3: 2. Overview of the Coupled System

    by Jean‐Christophe Golaz, Wuyin Lin, Xue Zheng, Shaocheng Xie, Andrew F. Roberts, Luke P. Van Roekel, Peter E. Thornton, Alice M. Barthel, Andrew M. Bradley, Jonathan D. Wolfe, et al.

    The Energy Exascale Earth System Model version 3 (E3SMv3) represents the latest advancement in Earth system modeling developed by the U.S. Department of Energy (DOE). Building upon previous versions, E3SMv3 introduces significant updates across its coupled components to enhance capability and improve fidelity. The atmosphere component incorporates advancements in chemistry, aerosol‐cloud interactions, convection, and microphysics. The ocean features a new time‐stepping scheme and a higher‐resolution unstructured mesh with sub‐ice‐shelf cavities, while the sea ice model integrates advanced snow and ice physics for more realistic cryospheric simulations. The land model introduces prognostic vegetation dynamics and a new sub‐grid topographic treatment of solar radiation. A new tri‐grid configuration harmonizes the horizontal grids of the land and river components for improved process coupling. It is enabled by a new non‐linear remapping between the atmosphere and land. E3SMv3 underwent extensive testing through a comprehensive simulation campaign, including pre‐industrial control, idealized experiments, and historical simulations spanning 1850–2024. The model demonstrates significant improvements in simulating the evolution of the historical surface temperature, particularly addressing the “pothole cooling” bias in earlier versions. Reduced aerosol‐related forcing contributes to more realistic radiative forcing and better alignment with the observational record. Ocean heat content (OHC) and sea ice trends are also improved as a result.


  • Open Access

    Overview of the Nephele Perturbed Parameter Ensemble for Aerosol‐Cloud Interactions in E3SMv3

    by J. M. Nugent, H. Brown, A. Kirby, D. T. McCoy, G. Allen, T. Aerenson, S. M. Burrows, D. Caulton, J. Fan, Y. Feng, et al.

    Aerosol‐cloud interactions (aci) are the leading source of uncertainty in inferring climate sensitivity from the historical record. Earth system models (ESMs) struggle to represent aci because the processes responsible for these phenomena occur at much finer time and space scales than can be resolved by any ESM. Observational constraints provide key benchmarks to test ESMs, but cannot be used alone to fully understand aci processes except in very specific cases where causality is controlled; some degree of modeling is required to infer aci and estimate radiative forcing. Here, we generate and characterize a perturbed parameter ensemble (PPE) in version 3 of the Energy Exascale ESM (E3SMv3). We perturb 25 parameters that govern aci processes over 250 members and integrate the model over present‐day and preindustrial aerosol emissions. We find that the process representation in E3SMv3 is flexible and can generate global‐mean effective radiative forcings due to aci (ERFaci) ranging from −3.0 to +0.9 W m − 2 . The positive ERFaci values simulated by a portion of the PPE are implausible and result from parameter combinations that produce unrealistic top‐of‐atmosphere energy fluxes. While global‐mean cloud droplet number concentration always increases in response to anthropogenic aerosol, cloud liquid water path can both increase and decrease, suggesting that precipitation suppression is not the only aerosol‐cloud adjustment represented by E3SMv3. Analysis of which processes control liquid cloud adjustment in the PPE points toward stratiform precipitation processes and aerosol activation, which is consistent with many previous ESMs, as well as the new two‐moment convective cloud microphysics in E3SMv3.