Xiong Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiong Yan has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoning Tang
State Key Laboratory for New Textile Materials and Advanced Processing Technology, School of Textile Science and Engineering Wuhan Textile University Wuhan China
5 shared publications Xiaoning Tang
Key Laboratory of Textile Science and Technology, Ministry of Education, College of Textiles Donghua University Shanghai 201620 China
3 shared publicationsXingmin Zhuang
Key Laboratory of Textile Science and Technology, Ministry of Education, College of Textiles Donghua University Shanghai 201620 China
3 shared publicationsHuiping Zhang
Key Laboratory of Textile Science and Technology, Ministry of Education, College of Textiles Donghua University Shanghai 201620 China
2 shared publicationsXiansheng Zhang
Key Laboratory of Textile Science and Technology, Ministry of Education, College of Textiles Donghua University Shanghai 201620 China
2 shared publicationsDeyi Kong
State Key Laboratory of Transducer Technology, Institute of Intelligent Machines, Chinese Academy of Sciences, China
1 shared publication
Latest Publications
- 15 October 2018
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 49 (8) , 981-1010
Airflow resistance of acoustical fibrous materials: Measurements, calculations and applications
The acoustic performance of fibrous materials is mainly determined by its airflow resistance, and it is a parameter of the resistance that the airflow meets through the materials. This paper has summarized the recent advances on the measurements, calculations and applications of airflow resistance. Firstly, different methods for airflow resistance measurements are presented, mainly including the direct airflow method, alternating airflow method and acoustical method. We have summarized the development history, current status and industrial applications of these methods. Secondly, this paper has summarized the models of calculating airflow resistance. Most of these empirical models are based on the characteristic parameters of fibrous materials, for instance bulk density, fiber diameter, porosity and thickness. Thirdly, this review has gathered the applications of airflow resistance in sound absorption and noise control. It is a crucial parameter in the prediction of both normal incidence sound absorption and reverberation chamber sound absorption. In conclusion, this review has concluded with some perspectives for the measurements, calculations and applications of airflow resistance.
- 15 October 2018
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 49 (8) , 981-1010
Airflow resistance of acoustical fibrous materials: Measurements, calculations and applications
The acoustic performance of fibrous materials is mainly determined by its airflow resistance, and it is a parameter of the resistance that the airflow meets through the materials. This paper has summarized the recent advances on the measurements, calculations and applications of airflow resistance. Firstly, different methods for airflow resistance measurements are presented, mainly including the direct airflow method, alternating airflow method and acoustical method. We have summarized the development history, current status and industrial applications of these methods. Secondly, this paper has summarized the models of calculating airflow resistance. Most of these empirical models are based on the characteristic parameters of fibrous materials, for instance bulk density, fiber diameter, porosity and thickness. Thirdly, this review has gathered the applications of airflow resistance in sound absorption and noise control. It is a crucial parameter in the prediction of both normal incidence sound absorption and reverberation chamber sound absorption. In conclusion, this review has concluded with some perspectives for the measurements, calculations and applications of airflow resistance.
- 19 August 2018
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 49 (6) , 693-721
A review on the damping properties of fiber reinforced polymer composites
Fiber reinforced polymer composites have great potential for engineering applications. In this work, we have provided a comprehensive review on the damping properties of fiber reinforced polymer composites. This paper has focused on the mechanism and analytical method of damping properties. This work also presents a broad review on several factors which determined the damping, such as matrix, fiber types, fiber architecture, fiber surface modification, and incorporated fillers. We further discussed the role of interfacial region on the improvement of damping, where high shear strain energy is stored at this region. Nanofillers, fiber coating, and interpenetrating polymer networks have high potential for damping treatment. We have concluded this review with some helpful suggestions for the future development of fiber reinforced composites with desired damping properties.
- 19 August 2018
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 49 (6) , 693-721
A review on the damping properties of fiber reinforced polymer composites
Fiber reinforced polymer composites have great potential for engineering applications. In this work, we have provided a comprehensive review on the damping properties of fiber reinforced polymer composites. This paper has focused on the mechanism and analytical method of damping properties. This work also presents a broad review on several factors which determined the damping, such as matrix, fiber types, fiber architecture, fiber surface modification, and incorporated fillers. We further discussed the role of interfacial region on the improvement of damping, where high shear strain energy is stored at this region. Nanofillers, fiber coating, and interpenetrating polymer networks have high potential for damping treatment. We have concluded this review with some helpful suggestions for the future development of fiber reinforced composites with desired damping properties.
- 8 August 2018
- Published by Wiley in Polymer Composites
- Vol. 40 (5) , 2012-2018
Sound absorption properties of nonwoven fabric based multi‐layer composites
In this article, the sound absorption properties of multi‐layer fibrous composites consist of nonwoven fabric, woven fabric and polyethylene (PE) membrane was investigated. Six types of different constructions including both bi‐layer and three‐layer structures were tested by impedance tube ranged from 100 to 6,300 Hz. To improve the sound absorption of multi‐layer composites, the effects of layering sequence, woven fabric and PE membrane were studied. It has been found that layering sequence is important for sound absorption properties. The absorber has the highest sound absorption coefficients of 0.538 when PE membrane was placed at the middle position of the multilayer structure. This study has concluded that the layering sequence should be emphatically considered when designing nonwoven fabric‐based multilayer sound absorption composites. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers POLYM. COMPOS., 40:2012–2018, 2019. © 2018 Society of Plastics Engineers
- 8 August 2018
- Published by Wiley in Polymer Composites
- Vol. 40 (5) , 2012-2018
Sound absorption properties of nonwoven fabric based multi‐layer composites
In this article, the sound absorption properties of multi‐layer fibrous composites consist of nonwoven fabric, woven fabric and polyethylene (PE) membrane was investigated. Six types of different constructions including both bi‐layer and three‐layer structures were tested by impedance tube ranged from 100 to 6,300 Hz. To improve the sound absorption of multi‐layer composites, the effects of layering sequence, woven fabric and PE membrane were studied. It has been found that layering sequence is important for sound absorption properties. The absorber has the highest sound absorption coefficients of 0.538 when PE membrane was placed at the middle position of the multilayer structure. This study has concluded that the layering sequence should be emphatically considered when designing nonwoven fabric‐based multilayer sound absorption composites. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers POLYM. COMPOS., 40:2012–2018, 2019. © 2018 Society of Plastics Engineers
- 15 February 2018
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (5) , 855-866
Multiple regression analysis of a woven fabric sound absorber
In this study, the effects of physical parameters on the acoustic absorption properties of woven fabrics were studied. The acoustic absorption properties of 24 kinds of woven fabrics with different structural parameters were measured and analyzed. Multiple linear regression models have been established to characterize the relationship between acoustic behavior and various physical parameters. It has been found that the acoustic absorption properties were mainly determined by the perforation ratio and air permeability. The decrease in perforation ratio and air permeability results in an increase of acoustic absorption properties of woven fabrics. Furthermore, three woven fabrics were used to validate the proposed multiple regression models. The established models could well predict the acoustic absorption properties of woven fabrics where the correlation coefficient is higher than 0.77 with air gaps of 1, 2, and 3 cm, respectively.
- 15 February 2018
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (5) , 855-866
Multiple regression analysis of a woven fabric sound absorber
In this study, the effects of physical parameters on the acoustic absorption properties of woven fabrics were studied. The acoustic absorption properties of 24 kinds of woven fabrics with different structural parameters were measured and analyzed. Multiple linear regression models have been established to characterize the relationship between acoustic behavior and various physical parameters. It has been found that the acoustic absorption properties were mainly determined by the perforation ratio and air permeability. The decrease in perforation ratio and air permeability results in an increase of acoustic absorption properties of woven fabrics. Furthermore, three woven fabrics were used to validate the proposed multiple regression models. The established models could well predict the acoustic absorption properties of woven fabrics where the correlation coefficient is higher than 0.77 with air gaps of 1, 2, and 3 cm, respectively.
- 10 August 2017
- Published by SAGE Publications in Textile Research Journal
- Vol. 88 (22) , 2568-2578
Facile dip-coating process towards multifunctional nonwovens: Robust noise reduction, abrasion resistance and antistatic electricity
In this study, a multifunctional hybrid coating consisting of waterborne polyurethane (WPU), graphite nanoplatelets (GNPs) and sodium dodecyl sulfate (SDS) was deposited onto the surface of nonwoven fabrics via a dip-coating approach. The results of noise reduction indicated that the acoustic transmission loss of control nonwoven fabrics increased from 3.87 dB to higher than 18 dB after WPU and graphite modification. Moreover, the prepared nonwoven fabrics could withstand more than 2000 times the abrasion against grinding wheels, which significantly improved in comparison with control nonwoven fabrics. The surface resistance of modified nonwoven fabrics decreased approximately seven orders of magnitudes, which exhibited robust antistatic properties. Therefore, it can be concluded that the facile dip-coating method has potential for noise reduction simultaneously with abrasion resistance and antistatic electricity applications.
- 10 August 2017
- Published by SAGE Publications in Textile Research Journal
- Vol. 88 (22) , 2568-2578
Facile dip-coating process towards multifunctional nonwovens: Robust noise reduction, abrasion resistance and antistatic electricity
In this study, a multifunctional hybrid coating consisting of waterborne polyurethane (WPU), graphite nanoplatelets (GNPs) and sodium dodecyl sulfate (SDS) was deposited onto the surface of nonwoven fabrics via a dip-coating approach. The results of noise reduction indicated that the acoustic transmission loss of control nonwoven fabrics increased from 3.87 dB to higher than 18 dB after WPU and graphite modification. Moreover, the prepared nonwoven fabrics could withstand more than 2000 times the abrasion against grinding wheels, which significantly improved in comparison with control nonwoven fabrics. The surface resistance of modified nonwoven fabrics decreased approximately seven orders of magnitudes, which exhibited robust antistatic properties. Therefore, it can be concluded that the facile dip-coating method has potential for noise reduction simultaneously with abrasion resistance and antistatic electricity applications.
- Open Access
- 7 August 2017
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 48 (1) , 201-220
Acoustical analysis of corduroy fabric for sound absorption: Experiments and simulations
Corduroy The first two authors contributed equally to this paper. fabrics have been widely used in interior decoration currently. This work mainly investigated the acoustical properties of corduroy fabrics in relation to air permeability and airflow resistance. Five specimens with similar surface density and different wale width are used. The results indicated that corduroy fabrics with thicker wale width exhibited higher air permeability and lower airflow resistance. Furthermore, the increased width of wale is beneficial to improve the acoustic absorption of corduroy fabric. Two models based on air permeability and airflow resistance are taken to characterize the acoustical behavior. It has been indicated that Pieren model could well predict the acoustic absorption coefficient of corduroy fabric, and the difference of acoustic absorption is due to the varied air permeability and airflow resistance resulting from the different wale width.
- 7 August 2017
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 48 (1) , 201-220
Open AccessAcoustical analysis of corduroy fabric for sound absorption: Experiments and simulations
Corduroy The first two authors contributed equally to this paper. fabrics have been widely used in interior decoration currently. This work mainly investigated the acoustical properties of corduroy fabrics in relation to air permeability and airflow resistance. Five specimens with similar surface density and different wale width are used. The results indicated that corduroy fabrics with thicker wale width exhibited higher air permeability and lower airflow resistance. Furthermore, the increased width of wale is beneficial to improve the acoustic absorption of corduroy fabric. Two models based on air permeability and airflow resistance are taken to characterize the acoustical behavior. It has been indicated that Pieren model could well predict the acoustic absorption coefficient of corduroy fabric, and the difference of acoustic absorption is due to the varied air permeability and airflow resistance resulting from the different wale width.
- 9 April 2017
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (12) , 2096-2106
Multi-layer fibrous structures for noise reduction
This review aims at gathering the available information of multi-layer fibrous structures toward acoustic absorption. Firstly, multi-layer nonwoven fabrics have attracted considerable attention of scientist and industries due to efficient noise reduction and economical production cost. Secondly, knitted and woven fabrics have different acoustic absorption mechanism with commonly used bulk fiber assemblies. This review critically examined both experimental investigations and theoretical analysis of multi-layer knitted and woven fabrics. Thirdly, multi-layer fibrous materials composed of nano-fibrous membrane and its unique advantages in noise reduction applications have been focused. Finally, we summarized the critical points and promising directions concerning the noise reduction properties of multi-layer structured fibrous materials.
- 9 April 2017
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (12) , 2096-2106
Multi-layer fibrous structures for noise reduction
This review aims at gathering the available information of multi-layer fibrous structures toward acoustic absorption. Firstly, multi-layer nonwoven fabrics have attracted considerable attention of scientist and industries due to efficient noise reduction and economical production cost. Secondly, knitted and woven fabrics have different acoustic absorption mechanism with commonly used bulk fiber assemblies. This review critically examined both experimental investigations and theoretical analysis of multi-layer knitted and woven fabrics. Thirdly, multi-layer fibrous materials composed of nano-fibrous membrane and its unique advantages in noise reduction applications have been focused. Finally, we summarized the critical points and promising directions concerning the noise reduction properties of multi-layer structured fibrous materials.
- Top Cited Papers
- 20 September 2016
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 81 (2) , 378-404
Dip-coating for fibrous materials: mechanism, methods and applications
- 20 September 2016
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 81 (2) , 378-404
Top Cited PapersDip-coating for fibrous materials: mechanism, methods and applications
- 13 August 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1004-1005, 562-565
The Comparison of Sound Absorption of Kapok-Based Fiber Nonwoven Fabrics
As a natural fiber, kapok fiber has the high hollow degree that is very good for sound absorption. Four different kinds of kapok-based fiber nonwoven fabrics, made by kapok fiber mixing with hollow polyester, viscose fiber, PP fiber and cotton fiber respectively, were made and the sound absorption coefficients were measured in the frequency region of 100 - 6300 Hz by using a two-microphone transfer-function method. The comparisons of the sound absorption for four types of materials with similar thickness and densities with no air gap and with 1 cm, 3 cm air gap were made. The results indicate that the sound absorption of kapok/hollow polyester fiber nonwoven fabrics is superior to those of other three ones and kapok/hollow polyester fiber nonwoven fabrics can be used for sound-absorbing materials in engineering.
- 13 August 2014
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 1004-1005, 562-565
The Comparison of Sound Absorption of Kapok-Based Fiber Nonwoven Fabrics
As a natural fiber, kapok fiber has the high hollow degree that is very good for sound absorption. Four different kinds of kapok-based fiber nonwoven fabrics, made by kapok fiber mixing with hollow polyester, viscose fiber, PP fiber and cotton fiber respectively, were made and the sound absorption coefficients were measured in the frequency region of 100 - 6300 Hz by using a two-microphone transfer-function method. The comparisons of the sound absorption for four types of materials with similar thickness and densities with no air gap and with 1 cm, 3 cm air gap were made. The results indicate that the sound absorption of kapok/hollow polyester fiber nonwoven fabrics is superior to those of other three ones and kapok/hollow polyester fiber nonwoven fabrics can be used for sound-absorbing materials in engineering.