Gregor G. Taylor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gregor G. Taylor has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Robert H. Hadfield
James Watt School of Engineering, University of Glasgow, Glasgow G128LT, UK
9 shared publications Bruce Bumble
California Institute of Technology
6 shared publications- Dmitry Morozov
James Watt School of Engineering, University of Glasgow, Glasgow G12 8QQ, UK
6 shared publications Matthew D. Shaw
California Institute of Technology
5 shared publications- Boris Korzh
University of Geneva
4 shared publications - Claudio Bruschini
École Polytechnique Fédérale de Lausanne
4 shared publications
Latest Publications
- Open Access
- 3 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (23)
Fluorescence-lifetime optical electrophysiology in contracting cardiomyocytes
Precise monitoring of cardiac electrophysiology in vitro is crucial to understanding heart function and cardiac disease. However, high-throughput, contact-free methods for directly measuring excitation–contraction coupling remain limited. Here, we introduce a paradigm for quantitative electrophysiological imaging that combines fluorescence lifetime and intensity information to capture dynamic cardiac signals with high fidelity. We show that lifetime measurements are intrinsically decoupled from motion artifacts and provide calibrated calcium concentration and membrane potential estimates across wide fields of view. Using a gated single-photon avalanche diode camera, we acquire fluorescence lifetime images at up to 200 frames per second with sufficient signal-to-noise ratio such that each frame contains meaningful lifetime information without temporal averaging. This approach yields spatially resolved maps of voltage and calcium values across contracting cardiomyocyte monolayers, revealing heterogeneous cell behaviors within individual assays and uncovering previously unreported dynamics during late-phase repolarization for real-time analysis of excitation–contraction coupling.
- 3 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (23)
Open AccessFluorescence-lifetime optical electrophysiology in contracting cardiomyocytes
Precise monitoring of cardiac electrophysiology in vitro is crucial to understanding heart function and cardiac disease. However, high-throughput, contact-free methods for directly measuring excitation–contraction coupling remain limited. Here, we introduce a paradigm for quantitative electrophysiological imaging that combines fluorescence lifetime and intensity information to capture dynamic cardiac signals with high fidelity. We show that lifetime measurements are intrinsically decoupled from motion artifacts and provide calibrated calcium concentration and membrane potential estimates across wide fields of view. Using a gated single-photon avalanche diode camera, we acquire fluorescence lifetime images at up to 200 frames per second with sufficient signal-to-noise ratio such that each frame contains meaningful lifetime information without temporal averaging. This approach yields spatially resolved maps of voltage and calcium values across contracting cardiomyocyte monolayers, revealing heterogeneous cell behaviors within individual assays and uncovering previously unreported dynamics during late-phase repolarization for real-time analysis of excitation–contraction coupling.
- Open Access
- 1 February 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (2)
Polarization dependence of single-photon sensitivity in superconducting nanowires at extended infrared wavelengths
Polarization dependent performance of superconducting nanowire single-photon detectors (SNSPDs) remains one of the obstacles to free space applications of SNSPDs. Here, we study the wavelength dependence of polarization anisotropy in two most widely used SNSPD geometries: meander and fractal nanowires based on niobium nitride thin films. In particular, we observe that polarization sensitivity becomes more pronounced at longer wavelengths, accompanied by an oscillatory behavior of photon count rate (PCR) on polarization angle. Furthermore, we report a wavelength-dependent shift in the polarization angle corresponding to maximum and minimum PCR and also find that experimental data consistently exhibit higher polarization anisotropy than predicted by simulations—likely due to fabrication-induced substrate effects. We deduce that the polarization anisotropy is a direct result of significant difference between the refractive indices of substrate and nanowire to that of the air, which surrounds them. We also outline potential directions for future work in improving our understanding of polarization anisotropy in SNSPDs. Our results provide new insight into the geometric factors governing polarization sensitivity in SNSPDs and underscore the potential of fractal nanowires in enabling broadband, polarization-independent single photon detection.
- 1 February 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (2)
Open AccessPolarization dependence of single-photon sensitivity in superconducting nanowires at extended infrared wavelengths
Polarization dependent performance of superconducting nanowire single-photon detectors (SNSPDs) remains one of the obstacles to free space applications of SNSPDs. Here, we study the wavelength dependence of polarization anisotropy in two most widely used SNSPD geometries: meander and fractal nanowires based on niobium nitride thin films. In particular, we observe that polarization sensitivity becomes more pronounced at longer wavelengths, accompanied by an oscillatory behavior of photon count rate (PCR) on polarization angle. Furthermore, we report a wavelength-dependent shift in the polarization angle corresponding to maximum and minimum PCR and also find that experimental data consistently exhibit higher polarization anisotropy than predicted by simulations—likely due to fabrication-induced substrate effects. We deduce that the polarization anisotropy is a direct result of significant difference between the refractive indices of substrate and nanowire to that of the air, which surrounds them. We also outline potential directions for future work in improving our understanding of polarization anisotropy in SNSPDs. Our results provide new insight into the geometric factors governing polarization sensitivity in SNSPDs and underscore the potential of fractal nanowires in enabling broadband, polarization-independent single photon detection.
- Open Access
Fluorescence-lifetime optical electrophysiology in contracting cardiomyocytes
Precise monitoring of cardiac electrophysiology in vitro is crucial to understanding heart function and cardiac disease. However, high-throughput, contact-free methods for directly measuring excitation-contraction coupling remain limited. Here, we introduce a new paradigm for quantitative electrophysiological imaging that combines fluorescence lifetime and intensity information to capture dynamic cardiac signals with high fidelity. We show that lifetime measurements are intrinsically decoupled from motion artifacts and provide calibrated calcium concentration and membrane potential readouts across wide fields of view. Using a gated single-photon avalanche diode camera, we acquire fluorescence lifetime images at up to 200 frames per second with sufficient signal-to-noise ratio such that each frame contains meaningful lifetime information without temporal averaging. This approach yields spatially resolved maps of absolute voltage and calcium values across contracting cardiomyocyte monolayers, revealing heterogeneous cell behaviors within individual assays and uncovering previously unreported dynamics during late-phase repolarization for real-time analysis of excitation-contraction coupling.
Open AccessFluorescence-lifetime optical electrophysiology in contracting cardiomyocytes
Precise monitoring of cardiac electrophysiology in vitro is crucial to understanding heart function and cardiac disease. However, high-throughput, contact-free methods for directly measuring excitation-contraction coupling remain limited. Here, we introduce a new paradigm for quantitative electrophysiological imaging that combines fluorescence lifetime and intensity information to capture dynamic cardiac signals with high fidelity. We show that lifetime measurements are intrinsically decoupled from motion artifacts and provide calibrated calcium concentration and membrane potential readouts across wide fields of view. Using a gated single-photon avalanche diode camera, we acquire fluorescence lifetime images at up to 200 frames per second with sufficient signal-to-noise ratio such that each frame contains meaningful lifetime information without temporal averaging. This approach yields spatially resolved maps of absolute voltage and calcium values across contracting cardiomyocyte monolayers, revealing heterogeneous cell behaviors within individual assays and uncovering previously unreported dynamics during late-phase repolarization for real-time analysis of excitation-contraction coupling.
- Top Cited PapersOpen Access
- 5 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (1)
Mid-infrared superconducting nanowire single-photon detectors: Potential, progress, and challenges
The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.
- 5 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (1)
Top Cited PapersOpen AccessMid-infrared superconducting nanowire single-photon detectors: Potential, progress, and challenges
The ability to detect single photons in the mid-infrared spectral range (beyond 2 μm wavelength, photon energy below 0.62 eV) is the key to unlocking a range of emerging scientific applications, from remote sensing LIDAR, molecular spectroscopy, and powerful new approaches to dark matter detection. Conventional detector types, such as semiconductor single-photon avalanche diodes, lose sensitivity at such low photon energy. Superconducting materials, with a much lower characteristic energy gap, hold particular promise. In this Perspective, we focus on recent advances in superconducting nanowire single-photon detectors, which have recently extended single-photon sensitivity up to 29 μm (0.043 eV). We discuss the potential for future advances and strategies to overcome challenges to technological development.
- Open Access
- 20 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (22) , 45684-45694
Mid-infrared high-resolution photon-counting LiDAR
Mid-infrared (MIR) detection at the single-photon limit has become increasingly accessible, enabling applications in free-space communications, industrial sensing, astronomy, and biomedicine. However, direct time-correlated single photon-counting in the MIR remains a significant challenge. Here, we demonstrate single-pixel scanning light detection and ranging (LiDAR) at 3500 nm wavelength with sub-millimeter depth resolution in the single-photon regime, enabled by a differential impedance-matched tungsten silicide (WSi) superconducting nanowire single-photon detector (SNSPD), optimized for MIR detection, and an optical parametric oscillator (OPO) laser source. The detector’s exceptional timing performance is demonstrated by resolving sub-millimeter depth features of a target positioned 100 mm from the transceiver. In addition, we present the wavelength-dependent photoresponse and timing jitter of the device across a 1550–5438 nm wavelength range. The photon-counting MIR LiDAR system shown features extremely wide broadband operation, high timing performance, and single-photon sensitivity. This work demonstrates the potential of MIR time-correlated single photon-counting applications enabled by SNSPDs.
- 20 October 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (22) , 45684-45694
Open AccessMid-infrared high-resolution photon-counting LiDAR
Mid-infrared (MIR) detection at the single-photon limit has become increasingly accessible, enabling applications in free-space communications, industrial sensing, astronomy, and biomedicine. However, direct time-correlated single photon-counting in the MIR remains a significant challenge. Here, we demonstrate single-pixel scanning light detection and ranging (LiDAR) at 3500 nm wavelength with sub-millimeter depth resolution in the single-photon regime, enabled by a differential impedance-matched tungsten silicide (WSi) superconducting nanowire single-photon detector (SNSPD), optimized for MIR detection, and an optical parametric oscillator (OPO) laser source. The detector’s exceptional timing performance is demonstrated by resolving sub-millimeter depth features of a target positioned 100 mm from the transceiver. In addition, we present the wavelength-dependent photoresponse and timing jitter of the device across a 1550–5438 nm wavelength range. The photon-counting MIR LiDAR system shown features extremely wide broadband operation, high timing performance, and single-photon sensitivity. This work demonstrates the potential of MIR time-correlated single photon-counting applications enabled by SNSPDs.
- Open Access
- 1 June 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (06) , P06052
SiPM and CMOS SPAD characterization at liquid nitrogen temperatures
A number of high energy physics and cosmology experiments use or plan to use single-photon avalanche diodes (SPADs) or SPAD based silicon photomultipliers (SiPMs) in harsh conditions, such as cryogenic temperatures and/or high radiation environments. In this contribution, studies of the operation of SPADs and front-end electronics at temperatures down to liquid nitrogen is presented. SPADs designed by EPFL AQUA Lab in 55 nm and 110 nm CMOS technology were tested at different temperatures between room temperature and liquid nitrogen. Some of the SPAD samples were neutron irradiated with fluences up to 1012 1-MeV neutron equivalent/cm2. The characterization included direct count rate measurements at different thresholds (threshold scans), in the dark and at low-light illumination by way of picosecond laser. The results of this work will be used to inform the photodetector design considerations in the planned Upgrade II of the LHCb ring imaging Cherenkov counter (RICH).
- 1 June 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (06) , P06052
Open AccessSiPM and CMOS SPAD characterization at liquid nitrogen temperatures
A number of high energy physics and cosmology experiments use or plan to use single-photon avalanche diodes (SPADs) or SPAD based silicon photomultipliers (SiPMs) in harsh conditions, such as cryogenic temperatures and/or high radiation environments. In this contribution, studies of the operation of SPADs and front-end electronics at temperatures down to liquid nitrogen is presented. SPADs designed by EPFL AQUA Lab in 55 nm and 110 nm CMOS technology were tested at different temperatures between room temperature and liquid nitrogen. Some of the SPAD samples were neutron irradiated with fluences up to 1012 1-MeV neutron equivalent/cm2. The characterization included direct count rate measurements at different thresholds (threshold scans), in the dark and at low-light illumination by way of picosecond laser. The results of this work will be used to inform the photodetector design considerations in the planned Upgrade II of the LHCb ring imaging Cherenkov counter (RICH).
- Open Access
Real-Time Wide-Field Fluorescence Lifetime Imaging via Single-Snapshot Acquisition for Biomedical Applications
Fluorescence lifetime imaging (FLI) is a powerful tool for investigating molecular processes, microenvironmental parameters, and molecular interactions across tissue to (sub-)cellular levels. Despite its established value in numerous biomedical applications, conventional FLI techniques are hindered by long acquisition times. This limitation restricts their use in real-time scenarios, such as monitoring fast biological processes, studying live organisms, and in environments that require rapid imaging and immediate inference, such as clinical image-guided interventions. Here, we present a novel FLI approach that combines a large-format time-gated SPAD array with dual-gate acquisition capability, alongside a rapid lifetime determination algorithm. This integration allows for real-time fluorescence lifetime estimation through single-snapshot acquisitions, eliminating the need for traditional, time-consuming time-resolved data collection. We demonstrate the scalability and versatility of this method by achieving real-time FLI across challenging biomedical applications, ranging from capturing fast neural dynamics at the microscopic scale, performing multimodal 3D volumetric FLI of tumor organoids at the mesoscopic scale, to macroscale FLI in both direct and highly scattering regimes. Furthermore, we validate its utility in fluorescence lifetime-guided surgical procedures using tissue-mimicking phantoms. Overall, this new methodology significantly enhances the temporal and spatial capabilities of FLI, opening the door to the assessment of fast dynamic biomedical signals. It also enables the seamless integration of FLI into clinical workflows, particularly in applications like fluorescence-guided surgery.
Open AccessReal-Time Wide-Field Fluorescence Lifetime Imaging via Single-Snapshot Acquisition for Biomedical Applications
Fluorescence lifetime imaging (FLI) is a powerful tool for investigating molecular processes, microenvironmental parameters, and molecular interactions across tissue to (sub-)cellular levels. Despite its established value in numerous biomedical applications, conventional FLI techniques are hindered by long acquisition times. This limitation restricts their use in real-time scenarios, such as monitoring fast biological processes, studying live organisms, and in environments that require rapid imaging and immediate inference, such as clinical image-guided interventions. Here, we present a novel FLI approach that combines a large-format time-gated SPAD array with dual-gate acquisition capability, alongside a rapid lifetime determination algorithm. This integration allows for real-time fluorescence lifetime estimation through single-snapshot acquisitions, eliminating the need for traditional, time-consuming time-resolved data collection. We demonstrate the scalability and versatility of this method by achieving real-time FLI across challenging biomedical applications, ranging from capturing fast neural dynamics at the microscopic scale, performing multimodal 3D volumetric FLI of tumor organoids at the mesoscopic scale, to macroscale FLI in both direct and highly scattering regimes. Furthermore, we validate its utility in fluorescence lifetime-guided surgical procedures using tissue-mimicking phantoms. Overall, this new methodology significantly enhances the temporal and spatial capabilities of FLI, opening the door to the assessment of fast dynamic biomedical signals. It also enables the seamless integration of FLI into clinical workflows, particularly in applications like fluorescence-guided surgery.
- Top Cited PapersOpen Access
- 6 February 2025
- Published by Optica Publishing Group in Optica
- Vol. 12 (2) , 168
High-resolution long-distance depth imaging LiDAR with ultra-low timing jitter superconducting nanowire single-photon detectors
Single-photon time-of-flight light detection and ranging (LiDAR) is a versatile technique for the measurement of absolute distances and for depth profiling. It has a wide variety of applications (e.g., land surveying, autonomous car navigation, underwater imaging) with the potential to achieve high-resolution three-dimensional images over long ranges when the key components of the measurement system are of a suitably high specification. In this work, a novel, high-efficiency, and low timing jitter superconducting nanowire single-photon detector, in conjunction with a custom single-pixel scanning transceiver system, and the time-correlated single-photon counting technique, enable the acquisition of millimeter-scale resolution depth images of scenes at standoff distances of hundreds of meters. A 1550 nm wavelength fiber laser was coupled to the monostatic transceiver to provide the illumination. The system was eye-safe with the maximum average optical output power being ≤3.5mW for measurements of a scene at a standoff distance of 1 km. The overall system instrumental response was approximately 13 ps full width half maximum. This enabled 1 mm depth features on a reference board and a human head to be clearly resolved when measured by the system in broad daylight at standoff distances of 45 and 325 m using per-pixel acquisition times of between 0.25 and 1 ms. These high-resolution results demonstrate the enormous potential of such a system to acquire detailed depth and intensity images of scenes from long distances in daylight or darkness conditions. This could lead to step change improvements in applications such as facial and human activity recognition and the imaging of scenes through clutter and atmospheric obscurants.
- 6 February 2025
- Published by Optica Publishing Group in Optica
- Vol. 12 (2) , 168
Top Cited PapersOpen AccessHigh-resolution long-distance depth imaging LiDAR with ultra-low timing jitter superconducting nanowire single-photon detectors
Single-photon time-of-flight light detection and ranging (LiDAR) is a versatile technique for the measurement of absolute distances and for depth profiling. It has a wide variety of applications (e.g., land surveying, autonomous car navigation, underwater imaging) with the potential to achieve high-resolution three-dimensional images over long ranges when the key components of the measurement system are of a suitably high specification. In this work, a novel, high-efficiency, and low timing jitter superconducting nanowire single-photon detector, in conjunction with a custom single-pixel scanning transceiver system, and the time-correlated single-photon counting technique, enable the acquisition of millimeter-scale resolution depth images of scenes at standoff distances of hundreds of meters. A 1550 nm wavelength fiber laser was coupled to the monostatic transceiver to provide the illumination. The system was eye-safe with the maximum average optical output power being ≤3.5mW for measurements of a scene at a standoff distance of 1 km. The overall system instrumental response was approximately 13 ps full width half maximum. This enabled 1 mm depth features on a reference board and a human head to be clearly resolved when measured by the system in broad daylight at standoff distances of 45 and 325 m using per-pixel acquisition times of between 0.25 and 1 ms. These high-resolution results demonstrate the enormous potential of such a system to acquire detailed depth and intensity images of scenes from long distances in daylight or darkness conditions. This could lead to step change improvements in applications such as facial and human activity recognition and the imaging of scenes through clutter and atmospheric obscurants.
- Open Access
- 15 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (16)
Improvements of readout signal integrity in mid-infrared superconducting nanowire single-photon detectors
Superconducting nanowire single-photon detectors (SNSPDs) in the mid-infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal, as the critical currents become increasingly smaller. We overcome this trade-off with a device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and approaching saturation at 10.6 μm. This work provides a platform for pushing SNSPD sensitivity to longer wavelengths while enabling the scalability to large arrays.
- 15 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (16)
Open AccessImprovements of readout signal integrity in mid-infrared superconducting nanowire single-photon detectors
Superconducting nanowire single-photon detectors (SNSPDs) in the mid-infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal, as the critical currents become increasingly smaller. We overcome this trade-off with a device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and approaching saturation at 10.6 μm. This work provides a platform for pushing SNSPD sensitivity to longer wavelengths while enabling the scalability to large arrays.
- Top Cited Papers
- 14 December 2023
- Published by Optica Publishing Group in Optica
- Vol. 10 (12) , 1672-1678
Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 µm
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 µm. To our knowledge, this represents the first demonstration of a single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 µm, while maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low-noise and high-timing-resolution photon counting detection, effectively providing a new class of single-photon sensitive detectors for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing, and direct dark-matter detection.
- 14 December 2023
- Published by Optica Publishing Group in Optica
- Vol. 10 (12) , 1672-1678
Top Cited PapersLow-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 µm
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 µm. To our knowledge, this represents the first demonstration of a single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 µm, while maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low-noise and high-timing-resolution photon counting detection, effectively providing a new class of single-photon sensitive detectors for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing, and direct dark-matter detection.