AHAkiko Hayashi

Akiko Hayashi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akiko Hayashi has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Matchup Strategies for Satellite Sea Surface Salinity Validation

    by Elizabeth E. Westbrook, Frederick M. Bingham, Severine Fournier, Akiko Hayashi

    Satellite validation is the process of comparing satellite measurements with in-situ measurements to ensure their accuracy. Satellite and in-situ sea surface salinity (SSS) measurements are different due to instrumental errors (IE), retrieval errors (RE), and representation differences (RD). In real-world data, IE, RE, and RD are inseparable, but validations seek to quantify only instrumental and retrieval error. Our goal is to determine which of four methods comparing in-situ and satellite measurements minimizes RD most effectively, which includes differences due to mismatches in the location and timing of the measurement, as well as representation error caused by the averaging of satellite measurements over a footprint. IE and RE were obviated by using simulated Argo float, and L2 NASA/SAC-D Aquarius, NASA·SMAP, and ESA·SMOS data generated from the high-resolution ECCO (Estimating the Climate and Circulation of the Oceans) model SSS data. The methods tested include the all-salinity difference averaging method (ASD), the N closest method (NCLO), which is an averaging method that is optimized for different satellites and regions of the ocean, and two single salinity difference methods—closest in space (SSDS) and closest in time (SSDT). The root mean square differences (RMSD) between the simulated in-situ and satellite measurements in seven regions of the ocean are used as a measure of the effectiveness of each method. The optimization of NCLO is examined to determine how the optimum matchup strategy changes depending on satellite track and region. We find that the NCLO method marginally produces the lowest RMSD in all regions but invoking a regionally optimized method is far more computationally expensive than the other methods. We find that averaging methods smooth IE, thus perhaps misleadingly lowering the detected instrumental error in the L2 product by as much as 0.15 PSU. It is apparent from our results that the dynamics of a particular region have more of an effect on matchup success than the method used. We recommend the SSDT validation strategy because it is more computationally efficient than NCLO, considers the proximity of in-situ and satellite measurements in both time and space, does not smooth instrumental errors with averaging, and generally produces RMSD values only slightly higher than the optimized NCLO method.


  • Open Access

    Quantification of Aquarius, SMAP, SMOS and Argo-Based Gridded Sea Surface Salinity Product Sampling Errors

    by Séverine Fournier, Frederick M. Bingham, Cristina González-Haro, Akiko Hayashi, Karly M. Ulfsax Carlin, Susannah K. Brodnitz, Verónica González-Gambau, Mikael Kuusela

    Evaluating and validating satellite sea surface salinity (SSS) measurements is fundamental. There are two types of errors in satellite SSS: measurement error due to the instrument’s inaccuracy and problems in retrieval, and sampling error due to unrepresentativeness in the way that the sea surface is sampled in time and space by the instrument. In this study, we focus on sampling errors, which impact both satellite and in situ products. We estimate the sampling errors of Level 3 satellite SSS products from Aquarius, SMOS and SMAP, and in situ gridded products. To do that, we use simulated L2 and L3 Aquarius, SMAP and SMOS SSS data, individual Argo observations and gridded Argo products derived from a 12-month high-resolution 1/48° ocean model. The use of the simulated data allows us to quantify the sampling error and eliminate the measurement error. We found that the sampling errors are high in regions of high SSS variability and are globally about 0.02/0.03 psu at weekly time scales and 0.01/0.02 psu at monthly time scales for satellite products. The in situ-based product sampling error is significantly higher than that of the three satellite products at monthly scales (0.085 psu) indicating the need to be cautious when using in situ-based gridded products to validate satellite products. Similar results are found using a Correlated Triple Collocation method that quantifies the standard deviation of products’ errors acquired with different instruments. By improving our understanding and quantifying the effect of sampling errors on satellite-in situ SSS consistency over various spatial and temporal scales, this study will help to improve the validation of SSS, the robustness of scientific applications and the design of future salinity missions.


  • Open Access

    Using Saildrones to Assess the SMAP Sea Surface Salinity Retrieval in the Coastal Regions

    by Wenqing Tang, Simon H. Yueh, Alexander G. Fore, Jorge Vazquez-Cuervo, Chelle Gentemann, Akiko K. Hayashi, Alex Akins, Marisol Garcia-Reyes

    Remote sensing of sea surface salinity (SSS) near land is difficult due to land contamination. In this study, we assess SSS retrieved from the Soil Moisture Active Passive (SMAP) mission in coastal region. SMAP SSS products from the Jet Propulsion Laboratory (JPL), and from the Remote Sensing Systems (RSS) are collocated with in situ data collected by saildrones during the North American West Coast Survey. Satellite and saildrone salinity measurements reveal consistent large-scale features: the fresh water (low SSS) assocciated with the Columbia River discharge, and the relatively salty water (high SSS) near Baja California associated with regional upwelling. The standard deviation of the difference (stdD) for collocations with SMAP Level 3 (8 days average) between 40 and 100km from land is 0.51 (0.56) psu for JPL V5 (RSS V4 70km). This is encouraging for the potential application of SMAP SSS in monitoring coastal zone freshwater particularly where there exists large freshwater variance. We analyze the different land correction approaches independently developed at JPL and RSS using SMAP Level 2 matchups. We found that JPL's land correction method is more promising in pushing SMAP SSS retrieval towards land. For future improvement, we suggest implementing dynamic land correction versus the current climatology based static land correction to reduce uncertainty in estimating land contribution. In Level 2 to Level 3 processing, a more rigorous quality control may help to eliminate outliers and deliver reliable Level 3 products without over-smoothing, which is important in resolving coastal processes such as fronts or upwelling.


  • Open Access

    An Empirical Algorithm for Mitigating the Sea Ice Effect in SMAP Radiometer for Sea Surface Salinity Retrieval in the Arctic Seas

    by Wenqing Tang, Simon H. Yueh, Alexander G. Fore, Akiko Hayashi, Michael Steele

    The L-band radiometer onboard the soil moisture active passive (SMAP) mission is used to retrieve sea surface salinity (SSS) over global ocean. In the Arctic seas, one of the major challenges of SSS remote sensing is the presence of sea ice. This paper proposes a data-driven ice correction (IC) algorithm which extracts emission from the water portion of measured brightness temperature (TB) in scenes mixed with water and ice. Emission of the ice portion was removed based on estimation according to the ice fraction ( f ice ) in the satellite footprint and ice signature derived from surrounding pixels. The IC algorithm is applied to SMAP TB data to obtain TB with IC (TB IC ), which are used for SSS retrieval using the standard JPL SMAP CAP processing system. We show that the algorithm is most effective near the ice edge, thereby increasing the f ice threshold for possible SSS retrieval to 15% from the current 3% without IC. SMAP SSS are validated using in situ salinity collected during NASA's Ocean Melting Greenland (OMG) mission from 2016 to 2020 along the Greenland coast. The number of collocations between OMG and SMAP daily gridded salinity increased by more than 30% with IC. The statistical analysis shows a similar retrieval accuracy with or without IC, with the standard deviation of the difference between OMG and SMAP of 1.41 psu (with IC) and 1.42 psu (without IC). The bias-adjusted SMAP SSS depicts salinity patterns and gradients around Greenland consistent with OMG measurements.


  • Open Access

    Sea Surface Salinity Subfootprint Variability from a Global High-Resolution Model

    by Frederick M. Bingham, Susannah Brodnitz, Severine Fournier, Karly Ulfsax, Akiko Hayashi, Hong Zhang

    Subfootprint variability (SFV) is variability at a spatial scale smaller than the footprint of a satellite, and it cannot be resolved by satellite observations. It is important to quantify and understand, as it contributes to the error budget for satellite data. The purpose of this study was to estimate the SFV for sea surface salinity (SSS) satellite observations. This was performed by using a high-resolution numerical model, a 1/48° version of the MITgcm simulation, from which one year of output has recently become available. SFV, defined as the weighted standard deviation of SSS within the satellite footprint, was computed from the model for a 2° × 2° grid of points for the one model year. We present maps of median SFV for 40 and 100 km footprint size, display histograms of its distribution for a range of footprint sizes and quantify its seasonality. At a 100 km (40 km) footprint size, SFV has a mode of 0.06 (0.04). It is found to vary strongly by location and season. It has larger values in western-boundary and eastern-equatorial regions, as well as in a few other areas. SFV has strong variability throughout the year, with the largest values generally being in the fall season. We also quantified the representation error, the degree of mismatch between random samples within a footprint and the footprint average. Our estimates of SFV and representation error can be used in understanding errors in the satellite observation of SSS.


  • Open Access

    The Potential of Space-Based Sea Surface Salinity on Monitoring the Hudson Bay Freshwater Cycle

    by Wenqing Tang, Simon H. Yueh, Daqing Yang, Ellie Mcleod, Alexander Fore, Akiko Hayashi, Estrella Olmedo, Justino Martínez, Carolina Gabarró

    Hudson Bay (HB) is the largest semi-inland sea in the Northern Hemisphere, connecting with the Arctic Ocean through the Foxe Basin and the northern Atlantic Ocean through the Hudson Strait. HB is covered by ice and snow in winter, which completely melts in summer. For about six months each year, satellite remote sensing of sea surface salinity (SSS) is possible over open water. SSS links freshwater contributions from river discharge, sea ice melt/freeze, and surface precipitation/evaporation. Given the strategic importance of HB, SSS has great potential in monitoring the HB freshwater cycle and studying its relationship with climate change. However, SSS retrieved in polar regions (poleward of 50°) from currently operational space-based L-band microwave instruments has large uncertainty (~ 1 psu) mainly due to sensitivity degradation in cold water (<5°C) and sea ice contamination. This study analyzes SSS from NASA Soil Moisture Active and Passive (SMAP) and European Space Agency (ESA) Soil Moisture and Ocean Salinity(SMOS) missions in the context of HB freshwater contents. We found that the main source of the year-to-year SSS variability is sea ice melting, in particular, the onset time and places of ice melt in the first couple of months of open water season. The freshwater contribution from surface forcing P-E is smaller in magnitude comparing with sea ice contribution but lasts on longer time scale through the whole open water season. River discharge is comparable with P-E in magnitude but peaks before ice melt. The spatial and temporal variations of freshwater contents largely exceed the remote sensed SSS uncertainty. This fact justifies the use of remote sensed SSS for monitoring the HB freshwater cycle.


  • Open Access

    On Extreme Winds at L-Band with the SMAP Synthetic Aperture Radar

    by Alexander G. Fore, Simon H. Yueh, Bryan W. Stiles, Wenqing Tang, Akiko K. Hayashi

    In this letter, we discuss some observations of the Soil Moisture Active Passive (SMAP) mission’s high-resolution synthetic aperture radar (SAR) for extreme winds and tropical cyclones. We find that the L-band cross-polarized backscatter is far more sensitive to wind speed at extreme winds than the co-polarized backscatter and it is essential to observations of extreme winds with L-band SAR. We introduce a cyclone wind speed retrieval algorithm and apply it to the limited SMAP SAR dataset of cyclones. We show that the SMAP SAR instrument is capable of measuring extreme winds up to the category 5 (70 m/s) wind speed regime providing unique capabilities as compared to traditional scatterometers with C and Ku-band radars.


  • Open Access

    The Potential and Challenges of Using Soil Moisture Active Passive (SMAP) Sea Surface Salinity to Monitor Arctic Ocean Freshwater Changes

    by Wenqing Tang, Simon Yueh, Daqing Yang, Alexander Fore, Akiko Hayashi, Tong Lee, Severine Fournier, Benjamin Holt

    Sea surface salinity (SSS) links various components of the Arctic freshwater system. SSS responds to freshwater inputs from river discharge, sea ice change, precipitation and evaporation, and oceanic transport through the open straits of the Pacific and Atlantic oceans. However, in situ SSS data in the Arctic Ocean are very sparse and insufficient to depict the large-scale variability to address the critical question of how climate variability and change affect the Arctic Ocean freshwater. The L-band microwave radiometer on board the NASA Soil Moisture Active Passive (SMAP) mission has been providing SSS measurements since April 2015, at approximately 60 km resolution with Arctic Ocean coverage in 1–2 days. With improved land/ice correction, the SMAP SSS algorithm that was developed at the Jet Propulsion Laboratory (JPL) is able to retrieve SSS in ice-free regions 35 km of the coast. SMAP observes a large-scale contrast in salinity between the Atlantic and Pacific sides of the Arctic Ocean, while retrievals within the Arctic Circle vary over time, depending on the sea ice coverage and river runoff. We assess the accuracy of SMAP SSS through comparative analysis with in situ salinity data collected by Argo floats, ships, gliders, and in field campaigns. Results derived from nearly 20,000 pairs of SMAP and in situ data North of 50°N collocated within a 12.5-km radius and daily time window indicate a Root Mean Square Difference (RMSD) less than ~1 psu with a correlation coefficient of 0.82 and a near unity regression slope over the entire range of salinity. In contrast, the Hybrid Coordinate Ocean Model (HYCOM) has a smaller RMSD with Argo. However, there are clear systematic biases in the HYCOM for salinity in the range of 25–30 psu, leading to a regression slope of about 0.5. In the region North of 65°N, the number of collocated samples drops more than 70%, resulting in an RMSD of about 1.2 psu. SMAP SSS in the Kara Sea shows a consistent response to discharge anomalies from the Ob’ and Yenisei rivers between 2015 and 2016, providing an assessment of runoff impact in a region where no in situ salinity data are available for validation. The Kara Sea SSS anomaly observed by SMAP is missing in the HYCOM SSS, which assimilates climatological runoffs without interannual changes. We explored the feasibility of using SMAP SSS to monitor the sea surface salinity variability at the major Arctic Ocean gateways. Results show that although the SMAP SSS is limited to about 1 psu accuracy, many large salinity changes are observable. This may lead to the potential application of satellite SSS in the Arctic monitoring system as a proxy of the upper ocean layer freshwater exchanges with subarctic oceans.