Dominic Bara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dominic Bara has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Ross Stewart Forgan
School of Chemistry, University of Glasgow, Glasgow, UK
6 shared publications Alexander J. R. Thom
School of Chemistry University of Glasgow Joseph Black Building, University Avenue Glasgow G12 8QQ UK
2 shared publications- Anna J. Warren
Diamond Light Source, Harwell Campus, Didcot, Oxfordshire OX11 0DE, UK
2 shared publications - Joshua P. Smith
Chemistry Division MPS School University of Sheffield Brook Hill Sheffield S3 7HF UK
2 shared publications - Lee Brammer
University of Sheffield
2 shared publications - Mark R. Warren
Diamond Light Source, Harwell Science and Innovation Campus, Didcot, UK
2 shared publications
Latest Publications
- Open Access
- 18 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Multi‐Crystal X‐Ray Diffraction (MCXRD) Bridges the Crystallographic Characterisation Gap in Chemistry and Materials Science: Application to MOFs
Structure determination by X‐ray diffraction is limited by crystal size and can be compromised by radiation damage when using very intense X‐ray radiation. X‐ray structure determination from partial diffraction data sets combined from multiple crystals is a potential solution, but its exploitation in chemistry and materials science is largely unrealized. Here we report the use of synchrotron radiation for multi‐crystal X‐ray diffraction (MCXRD) adapted for structure determination of metal‐organic framework (MOF) materials with crystal dimensions too small for conventional single‐crystal diffraction studies. We further show that radiation‐induced chemical changes and degradation of diffraction quality can be alleviated. Our approach encompasses both rotation‐ and stationary‐MCXRD measurements for 10 to 1000s of crystals with software‐optimized combination of the multiple data sets. We report the crystal structures of six MOFs: MOF‐919(Sc/Cu), MET‐2, MIL‐88B(Cr)‐1,4‐NDC, PCN‐260(Sc), UiO‐66, and UiO‐66‐MoO 4 with unit cell dimensions ranging from 18−114 Å and crystal sizes from 0.5−480 µm 3 . This approach can address the challenges of structure determination in a regime of particle size and sample radiation sensitivity that lies between existing single‐crystal X‐ray diffraction and the emerging field of electron diffraction. MCXRD can provide accurate atomic‐resolution structure determination for some of the most challenging cases in chemistry and materials science.
- 18 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (9)
Open AccessMulti‐Crystal X‐Ray Diffraction (MCXRD) Bridges the Crystallographic Characterisation Gap in Chemistry and Materials Science: Application to MOFs
Structure determination by X‐ray diffraction is limited by crystal size and can be compromised by radiation damage when using very intense X‐ray radiation. X‐ray structure determination from partial diffraction data sets combined from multiple crystals is a potential solution, but its exploitation in chemistry and materials science is largely unrealized. Here we report the use of synchrotron radiation for multi‐crystal X‐ray diffraction (MCXRD) adapted for structure determination of metal‐organic framework (MOF) materials with crystal dimensions too small for conventional single‐crystal diffraction studies. We further show that radiation‐induced chemical changes and degradation of diffraction quality can be alleviated. Our approach encompasses both rotation‐ and stationary‐MCXRD measurements for 10 to 1000s of crystals with software‐optimized combination of the multiple data sets. We report the crystal structures of six MOFs: MOF‐919(Sc/Cu), MET‐2, MIL‐88B(Cr)‐1,4‐NDC, PCN‐260(Sc), UiO‐66, and UiO‐66‐MoO 4 with unit cell dimensions ranging from 18−114 Å and crystal sizes from 0.5−480 µm 3 . This approach can address the challenges of structure determination in a regime of particle size and sample radiation sensitivity that lies between existing single‐crystal X‐ray diffraction and the emerging field of electron diffraction. MCXRD can provide accurate atomic‐resolution structure determination for some of the most challenging cases in chemistry and materials science.
- Open Access
- 18 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e23233
Multi‐Crystal X‐Ray Diffraction (MCXRD) Bridges the Crystallographic Characterisation Gap in Chemistry and Materials Science: Application to MOFs
Structure determination by X‐ray diffraction is limited by crystal size and can be compromised by radiation damage when using very intense X‐ray radiation. X‐ray structure determination from partial diffraction data sets combined from multiple crystals is a potential solution, but its exploitation in chemistry and materials science is largely unrealized. Here we report the use of synchrotron radiation for multi‐crystal X‐ray diffraction (MCXRD) adapted for structure determination of metal‐organic framework (MOF) materials with crystal dimensions too small for conventional single‐crystal diffraction studies. We further show that radiation‐induced chemical changes and degradation of diffraction quality can be alleviated. Our approach encompasses both rotation‐ and stationary‐MCXRD measurements for 10 to 1000s of crystals with software‐optimized combination of the multiple data sets. We report the crystal structures of six MOFs: MOF‐919(Sc/Cu), MET‐2, MIL‐88B(Cr)‐1,4‐NDC, PCN‐260(Sc), UiO‐66, and UiO‐66‐MoO 4 with unit cell dimensions ranging from 18−114 Å and crystal sizes from 0.5−480 µm 3 . This approach can address the challenges of structure determination in a regime of particle size and sample radiation sensitivity that lies between existing single‐crystal X‐ray diffraction and the emerging field of electron diffraction. MCXRD can provide accurate atomic‐resolution structure determination for some of the most challenging cases in chemistry and materials science.
- 18 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e23233
Open AccessMulti‐Crystal X‐Ray Diffraction (MCXRD) Bridges the Crystallographic Characterisation Gap in Chemistry and Materials Science: Application to MOFs
Structure determination by X‐ray diffraction is limited by crystal size and can be compromised by radiation damage when using very intense X‐ray radiation. X‐ray structure determination from partial diffraction data sets combined from multiple crystals is a potential solution, but its exploitation in chemistry and materials science is largely unrealized. Here we report the use of synchrotron radiation for multi‐crystal X‐ray diffraction (MCXRD) adapted for structure determination of metal‐organic framework (MOF) materials with crystal dimensions too small for conventional single‐crystal diffraction studies. We further show that radiation‐induced chemical changes and degradation of diffraction quality can be alleviated. Our approach encompasses both rotation‐ and stationary‐MCXRD measurements for 10 to 1000s of crystals with software‐optimized combination of the multiple data sets. We report the crystal structures of six MOFs: MOF‐919(Sc/Cu), MET‐2, MIL‐88B(Cr)‐1,4‐NDC, PCN‐260(Sc), UiO‐66, and UiO‐66‐MoO 4 with unit cell dimensions ranging from 18−114 Å and crystal sizes from 0.5−480 µm 3 . This approach can address the challenges of structure determination in a regime of particle size and sample radiation sensitivity that lies between existing single‐crystal X‐ray diffraction and the emerging field of electron diffraction. MCXRD can provide accurate atomic‐resolution structure determination for some of the most challenging cases in chemistry and materials science.
- Open Access
- 1 June 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (52) , 8115-8118
Modulated self-assembly of three flexible Cr( iii ) PCPs for SO 2 adsorption and detection
Modulated self-assembly protocols are used to develop facile, HF-free syntheses of the archetypal flexible PCP, MIL-53(Cr), and novel isoreticular analogues MIL-53(Cr)-Br and MIL-53(Cr)-NO 2 , which adsorb and sense SO 2 .
- 1 June 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 59 (52) , 8115-8118
Open AccessModulated self-assembly of three flexible Cr( iii ) PCPs for SO 2 adsorption and detection
Modulated self-assembly protocols are used to develop facile, HF-free syntheses of the archetypal flexible PCP, MIL-53(Cr), and novel isoreticular analogues MIL-53(Cr)-Br and MIL-53(Cr)-NO 2 , which adsorb and sense SO 2 .
- Open Access
- 11 April 2022
- Published by Elsevier in Materials Today Chemistry
- Vol. 24
Modulated self-assembly of an interpenetrated MIL-53 Sc metal–organic framework with excellent volumetric H2 storage and working capacity
- 11 April 2022
- Published by Elsevier in Materials Today Chemistry
- Vol. 24
Open AccessModulated self-assembly of an interpenetrated MIL-53 Sc metal–organic framework with excellent volumetric H2 storage and working capacity
- Open Access
- 13 October 2021
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 8 (12) , 3377-3386
Exploring and expanding the Fe-terephthalate metal–organic framework phase space by coordination and oxidation modulation
Modulated self-assembly of Fe-terephthalate metal–organic frameworks allows fine control over phase formation, offers insight into kinetic and thermodynamic landscapes, and the discovery of novel materials in an already well-studied complex system.
- 13 October 2021
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 8 (12) , 3377-3386
Open AccessExploring and expanding the Fe-terephthalate metal–organic framework phase space by coordination and oxidation modulation
Modulated self-assembly of Fe-terephthalate metal–organic frameworks allows fine control over phase formation, offers insight into kinetic and thermodynamic landscapes, and the discovery of novel materials in an already well-studied complex system.
- 24 April 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (20) , 8346-8357
Kinetic Control of Interpenetration in Fe–Biphenyl-4,4′-dicarboxylate Metal–Organic Frameworks by Coordination and Oxidation Modulation
Phase control in the self-assembly of metal-organic frameworks (MOFs) is often a case of trial and error; judicious control over a number of synthetic variables is required to select the desired topology and control features such as interpenetration and defectivity. Herein, we present a comprehensive investigation of self-assembly in the Fe-biphenyl-4,4'-dicarboxylate system, demonstrating that coordination modulation can reliably tune between the kinetic product, noninterpenetrated MIL-88D(Fe), and the thermodynamic product, two-fold interpenetrated MIL-126(Fe). Density functional theory simulations reveal that correlated disorder of the terminal anions on the metal clusters results in hydrogen bonding between adjacent nets in the interpenetrated phase and this is the thermodynamic driving force for its formation. Coordination modulation slows self-assembly and therefore selects the thermodynamic product MIL-126(Fe), while offering fine control over defectivity, inducing mesoporosity, but electron microscopy shows MIL-88D(Fe) persists in many samples despite not being evident by diffraction. Interpenetration control is also demonstrated using the 2,2'-bipyridine-5,5'-dicarboxylate linker; it is energetically prohibitive for it to adopt the twisted conformation required to form the interpenetrated phase, although multiple alternative phases are identified due to additional coordination of Fe cations to its N donors. Finally, we introduce oxidation modulation-the use of metal precursors in different oxidation states from that found in the final MOF-to kinetically control self-assembly. Combining coordination and oxidation modulation allows the synthesis of pristine MIL-126(Fe) with BET surface areas close to the predicted maximum for the first time, suggesting that combining the two may be a powerful methodology for the controlled self-assembly of high-valent MOFs.
- 24 April 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (20) , 8346-8357
Kinetic Control of Interpenetration in Fe–Biphenyl-4,4′-dicarboxylate Metal–Organic Frameworks by Coordination and Oxidation Modulation
Phase control in the self-assembly of metal-organic frameworks (MOFs) is often a case of trial and error; judicious control over a number of synthetic variables is required to select the desired topology and control features such as interpenetration and defectivity. Herein, we present a comprehensive investigation of self-assembly in the Fe-biphenyl-4,4'-dicarboxylate system, demonstrating that coordination modulation can reliably tune between the kinetic product, noninterpenetrated MIL-88D(Fe), and the thermodynamic product, two-fold interpenetrated MIL-126(Fe). Density functional theory simulations reveal that correlated disorder of the terminal anions on the metal clusters results in hydrogen bonding between adjacent nets in the interpenetrated phase and this is the thermodynamic driving force for its formation. Coordination modulation slows self-assembly and therefore selects the thermodynamic product MIL-126(Fe), while offering fine control over defectivity, inducing mesoporosity, but electron microscopy shows MIL-88D(Fe) persists in many samples despite not being evident by diffraction. Interpenetration control is also demonstrated using the 2,2'-bipyridine-5,5'-dicarboxylate linker; it is energetically prohibitive for it to adopt the twisted conformation required to form the interpenetrated phase, although multiple alternative phases are identified due to additional coordination of Fe cations to its N donors. Finally, we introduce oxidation modulation-the use of metal precursors in different oxidation states from that found in the final MOF-to kinetically control self-assembly. Combining coordination and oxidation modulation allows the synthesis of pristine MIL-126(Fe) with BET surface areas close to the predicted maximum for the first time, suggesting that combining the two may be a powerful methodology for the controlled self-assembly of high-valent MOFs.