Daniele Giardino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daniele Giardino has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Spanò
Department of Electronic Engineering, Tor Vergata University of Rome, 00133 Rome, Italy
7 shared publications - Gian Carlo Cardarilli
Department of Electronic Engineering, Tor Vergata University of Rome, 00133 Rome, Italy
6 shared publications - Luca Di Nunzio
Department of Electronic Engineering, Tor Vergata University of Rome, 00133 Rome, Italy
6 shared publications - Marco Re
University of Rome Tor Vergata
6 shared publications - Rocco Fazzolari
Department of Electronic Engineering, Tor Vergata University of Rome, Rome, Italy
6 shared publications - Marco Matta
University of Rome Tor Vergata
4 shared publications
Latest Publications
- Open Access
- 6 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 98586-98595
An RNS-Based Initial Absolute Position Estimator for Electrical Encoders
In digital systems, the Residue Number System (RNS) represents an interesting alternative to the traditional two’s complement representation. Its performance and low-power properties have attracted significant research interest over the years. In this paper, RNS is used to estimate the angular position of a multi-trace electrical encoder (EE), an electro-mechanical device to measure angles at high precision widely used, for example, in antennas on-board satellites. The model of this system presents cyclic characteristics and, consequently, allows efficient use of modular arithmetic for its description. The RNS is applied to EEs equipped with more than two plates, and the absolute angle reconstruction is performed by using the Chinese Remainder Theorem (CRT). Furthermore, the use of RNS allows detection and mitigation solutions for errors due to encoders’ non-idealities and electrical noise. In this noisy context, we provide a detailed analysis of the performance of the system and propose a more robust, flexible, and easy-to-implement solution compared with the traditional methods. The results show that the RNS-based system can attenuate the noise, measure accurately the angles, and improve the overall performance.
- 6 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 98586-98595
Open AccessAn RNS-Based Initial Absolute Position Estimator for Electrical Encoders
In digital systems, the Residue Number System (RNS) represents an interesting alternative to the traditional two’s complement representation. Its performance and low-power properties have attracted significant research interest over the years. In this paper, RNS is used to estimate the angular position of a multi-trace electrical encoder (EE), an electro-mechanical device to measure angles at high precision widely used, for example, in antennas on-board satellites. The model of this system presents cyclic characteristics and, consequently, allows efficient use of modular arithmetic for its description. The RNS is applied to EEs equipped with more than two plates, and the absolute angle reconstruction is performed by using the Chinese Remainder Theorem (CRT). Furthermore, the use of RNS allows detection and mitigation solutions for errors due to encoders’ non-idealities and electrical noise. In this noisy context, we provide a detailed analysis of the performance of the system and propose a more robust, flexible, and easy-to-implement solution compared with the traditional methods. The results show that the RNS-based system can attenuate the noise, measure accurately the angles, and improve the overall performance.
- 11 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (6) , 2231-2235
Efficient Digital Implementation of a Multirate-Based Variable Fractional Delay Filter for Wideband Beamforming
In this brief, we propose a FPGA implementation of a novel Variable Fractional Delay (VFD) filter architecture for digital wideband (hundred of MHz or more) beamforming applications. The proposed architecture is based on a multirate structure that allows reaching high performance in terms of amplitude and group delay with a significant reduction in design complexity. Usually, the antenna’s beams are modified by introducing precise delays that can be multiples or fractions of the sampling period. The most used structures for realizing this operation are Farrow filters but, for wideband applications, the classical Farrow structure may require a huge amount of resources. A common solution to simplify the Farrow filter architecture is interpolation. However, this solution requires an increase of the clock frequency which is not always possible. In this context, our multirate approach mitigates the limitations in terms of computational complexity avoiding the requirement to increase of the clock frequency, while still exhibiting great performance. A comparison between a reference design based on the proposed approach and the literature is also provided. The experimental results confirm that the proposed architecture, characterized by a computational complexity similar to other works, exhibits better performance without the need to increase the clock frequency.
- 11 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (6) , 2231-2235
Efficient Digital Implementation of a Multirate-Based Variable Fractional Delay Filter for Wideband Beamforming
In this brief, we propose a FPGA implementation of a novel Variable Fractional Delay (VFD) filter architecture for digital wideband (hundred of MHz or more) beamforming applications. The proposed architecture is based on a multirate structure that allows reaching high performance in terms of amplitude and group delay with a significant reduction in design complexity. Usually, the antenna’s beams are modified by introducing precise delays that can be multiples or fractions of the sampling period. The most used structures for realizing this operation are Farrow filters but, for wideband applications, the classical Farrow structure may require a huge amount of resources. A common solution to simplify the Farrow filter architecture is interpolation. However, this solution requires an increase of the clock frequency which is not always possible. In this context, our multirate approach mitigates the limitations in terms of computational complexity avoiding the requirement to increase of the clock frequency, while still exhibiting great performance. A comparison between a reference design based on the proposed approach and the literature is also provided. The experimental results confirm that the proposed architecture, characterized by a computational complexity similar to other works, exhibits better performance without the need to increase the clock frequency.
- 9 April 2022
- Published by Springer Nature
- p. 39-44
A M-PSK Timing Recovery Loop Based on Q-Learning
- Open Access
A New Multilabel System for Automatic Music Emotion Recognition
Achieving advancements in automatic recognition of emotions that music can induce require considering multiplicity and simultaneity of emotions. Comparison of different machine learning algorithms performing multilabel and multiclass classification is the core of our work. The study analyzes the implementation of the Geneva Emotional Music Scale 9 in the Emotify music dataset and investigates its adoption from a machine-learning perspective. We approach the scenario of emotions expression/induction through music as a multilabel and multiclass problem, where multiple emotion labels can be adopted for the same music track by each annotator (multilabel), and each emotion can be identified or not in the music (multiclass). The aim is the automatic recognition of induced emotions through music.
Open AccessA New Multilabel System for Automatic Music Emotion Recognition
Achieving advancements in automatic recognition of emotions that music can induce require considering multiplicity and simultaneity of emotions. Comparison of different machine learning algorithms performing multilabel and multiclass classification is the core of our work. The study analyzes the implementation of the Geneva Emotional Music Scale 9 in the Emotify music dataset and investigates its adoption from a machine-learning perspective. We approach the scenario of emotions expression/induction through music as a multilabel and multiclass problem, where multiple emotion labels can be adopted for the same music track by each annotator (multilabel), and each emotion can be identified or not in the music (multiclass). The aim is the automatic recognition of induced emotions through music.
- Top Cited PapersOpen Access
- 27 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 4948
Multi-Agent Reinforcement Learning: A Review of Challenges and Applications
In this review, we present an analysis of the most used multi-agent reinforcement learning algorithms. Starting with the single-agent reinforcement learning algorithms, we focus on the most critical issues that must be taken into account in their extension to multi-agent scenarios. The analyzed algorithms were grouped according to their features. We present a detailed taxonomy of the main multi-agent approaches proposed in the literature, focusing on their related mathematical models. For each algorithm, we describe the possible application fields, while pointing out its pros and cons. The described multi-agent algorithms are compared in terms of the most important characteristics for multi-agent reinforcement learning applications—namely, nonstationarity, scalability, and observability. We also describe the most common benchmark environments used to evaluate the performances of the considered methods.
- 27 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 4948
Top Cited PapersOpen AccessMulti-Agent Reinforcement Learning: A Review of Challenges and Applications
In this review, we present an analysis of the most used multi-agent reinforcement learning algorithms. Starting with the single-agent reinforcement learning algorithms, we focus on the most critical issues that must be taken into account in their extension to multi-agent scenarios. The analyzed algorithms were grouped according to their features. We present a detailed taxonomy of the main multi-agent approaches proposed in the literature, focusing on their related mathematical models. For each algorithm, we describe the possible application fields, while pointing out its pros and cons. The described multi-agent algorithms are compared in terms of the most important characteristics for multi-agent reinforcement learning applications—namely, nonstationarity, scalability, and observability. We also describe the most common benchmark environments used to evaluate the performances of the considered methods.
- 30 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (6) , 1912-1916
M-PSK Demodulator With Joint Carrier and Timing Recovery
In this work, we propose a new digital receiver for Phase-Shift Keying (PSK) modulation based on the integration of the conventional digital Costas Loop circuit with a new timing recovery method. The timing recovery is applied to the PSK demodulator using an Iterative Learning Control (ILC) law and it is based on the minimization of the intersymbol interference using only one sample per symbol. The main advantage of the proposed timing recovery method is the insensitivity to frequency offsets which results in improved performance and robustness of the Costas Loop circuit. Experiments comparing a conventional receiver (cascade of Costas Loop and Early-Late Timing Synchronizer) to the proposed receiver in scenarios characterized by low signal-to-noise ratios and large frequency and phase errors, show that the time needed to reduce the errors of the proposed receiver is seven times smaller than the conventional receiver. Moreover, the impact of the proposed method on the necessary hardware resources (area and power consumption) is negligible.
- 30 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (6) , 1912-1916
M-PSK Demodulator With Joint Carrier and Timing Recovery
In this work, we propose a new digital receiver for Phase-Shift Keying (PSK) modulation based on the integration of the conventional digital Costas Loop circuit with a new timing recovery method. The timing recovery is applied to the PSK demodulator using an Iterative Learning Control (ILC) law and it is based on the minimization of the intersymbol interference using only one sample per symbol. The main advantage of the proposed timing recovery method is the insensitivity to frequency offsets which results in improved performance and robustness of the Costas Loop circuit. Experiments comparing a conventional receiver (cascade of Costas Loop and Early-Late Timing Synchronizer) to the proposed receiver in scenarios characterized by low signal-to-noise ratios and large frequency and phase errors, show that the time needed to reduce the errors of the proposed receiver is seven times smaller than the conventional receiver. Moreover, the impact of the proposed method on the necessary hardware resources (area and power consumption) is negligible.
- Open Access
- 20 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2909
Hardware Prototyping and Validation of a W-ΔDOR Digital Signal Processor
Microwave tracking, usually performed by on ground processing of the signals coming from a spacecraft, represents a crucial aspect in every deep-space mission. Various noise sources, including receiver noise, affect these signals, limiting the accuracy of the radiometric measurements obtained from the radio link. There are several methods used for spacecraft tracking, including the Delta-Differential One-Way Ranging ( DOR) technique. In the past years, European Space Agency (ESA) missions relied on a narrowband DOR system for navigation in the cruise phase. To limit the adverse effect of nonlinearities in the receiving chain, an innovative wideband approach to DOR measurements has recently been proposed. This work presents the hardware implementation of a new version of the ESA X/Ka Deep Space Transponder based on the new tracking technique named Wideband DOR (W- DOR). The architecture of the new transponder guarantees backward compatibility with narrowband DOR.- 20 July 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (14) , 2909
Open AccessHardware Prototyping and Validation of a W-ΔDOR Digital Signal Processor
Microwave tracking, usually performed by on ground processing of the signals coming from a spacecraft, represents a crucial aspect in every deep-space mission. Various noise sources, including receiver noise, affect these signals, limiting the accuracy of the radiometric measurements obtained from the radio link. There are several methods used for spacecraft tracking, including the Delta-Differential One-Way Ranging ( DOR) technique. In the past years, European Space Agency (ESA) missions relied on a narrowband DOR system for navigation in the cruise phase. To limit the adverse effect of nonlinearities in the receiving chain, an innovative wideband approach to DOR measurements has recently been proposed. This work presents the hardware implementation of a new version of the ESA X/Ka Deep Space Transponder based on the new tracking technique named Wideband DOR (W- DOR). The architecture of the new transponder guarantees backward compatibility with narrowband DOR. - 11 May 2019
- Published by Springer Nature
- p. 445-451
Comparison and Implementation of Variable Fractional Delay Filters for Wideband Digital Beamforming
- 11 May 2019
- Published by Springer Nature
- p. 445-451
Comparison and Implementation of Variable Fractional Delay Filters for Wideband Digital Beamforming
- Open Access
- 5 March 2019
- Published by Insight Society in International Journal on Advanced Science, Engineering and Information Technology
- Vol. 9 (2) , 538-543
A Feature Extractor IC for Acoustic Emission Non-destructive Testing
In this paper, we present the design and the implementation of a digital Application Specific Integrated Circuit (ASIC) for Acoustic Emission (AE) non-destructive testing. The AE non-destructive testing method is a diagnostic method used to detect faults in mechanically loaded structures and components. If a structure is subjected to mechanical load or stress, the presence of structural discontinuities releases energy in the form of acoustic emissions through the constituting material. The analysis of these acoustic emissions can be used to determine the presence of faults in several structures. The proposed circuit has been designed for IoT (Internet of Things) applications, and it can be used to simplify the existing procedures adopted for structural integrity verifications of pressurized metal tanks that, in some countries, they are based on periodic checks. The proposed ASIC is provided of Digital Signal Processing (DSP) capabilities for the extraction of the main four parameters used in the AE analysis that are the energy of the signal, the duration of the event, the number of the crossing of a certain threshold and finally the maximum value reached by the AE signal. The circuit is provided of an SPI interface capable of sending and receiving data to/from wireless transceivers to share information on the web. The DSP circuit has been coded in VHDL and synthesized in 90 nm technology using Synopsys. The circuit has been characterized in terms of area, speed, and power consumption. Experimental results show that the proposed circuit presents very low power consumption properties and low area requirements.
- 5 March 2019
- Published by Insight Society in International Journal on Advanced Science, Engineering and Information Technology
- Vol. 9 (2) , 538-543
Open AccessA Feature Extractor IC for Acoustic Emission Non-destructive Testing
In this paper, we present the design and the implementation of a digital Application Specific Integrated Circuit (ASIC) for Acoustic Emission (AE) non-destructive testing. The AE non-destructive testing method is a diagnostic method used to detect faults in mechanically loaded structures and components. If a structure is subjected to mechanical load or stress, the presence of structural discontinuities releases energy in the form of acoustic emissions through the constituting material. The analysis of these acoustic emissions can be used to determine the presence of faults in several structures. The proposed circuit has been designed for IoT (Internet of Things) applications, and it can be used to simplify the existing procedures adopted for structural integrity verifications of pressurized metal tanks that, in some countries, they are based on periodic checks. The proposed ASIC is provided of Digital Signal Processing (DSP) capabilities for the extraction of the main four parameters used in the AE analysis that are the energy of the signal, the duration of the event, the number of the crossing of a certain threshold and finally the maximum value reached by the AE signal. The circuit is provided of an SPI interface capable of sending and receiving data to/from wireless transceivers to share information on the web. The DSP circuit has been coded in VHDL and synthesized in 90 nm technology using Synopsys. The circuit has been characterized in terms of area, speed, and power consumption. Experimental results show that the proposed circuit presents very low power consumption properties and low area requirements.