Wushuang Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wushuang Bai has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Jianbin Zheng
Northwest University
7 shared publications Junping Ma
4 shared publicationsBijun Zhao
3 shared publicationsJiayun Liang
3 shared publications- Binglin Li
College of Food Science and Engineering, Northwest University, Xi'an 710069, China
2 shared publications Di Wang
2 shared publications
Latest Publications
- Open Access
Ultra-Sensitive Electrochemical H2S Sensor Based on Au NP-Decorated 2D Porphyrin MOF Nanocomposite
Hydrogen sulfide (H2S) is a contaminant for water quality, which can affect the eyes, respiratory system, and central nervous system, and may also cause damage to multiple organs such as the heart. Therefore, rapid and sensitive detection of trace H2S is of great importance. In this work, a novel gold nanoparticle/2D porphyrin metal–organic framework nanocomposite (Au NPs/2D Cu-TCPP MOF) was prepared, and a novel electrochemical sensing method was established for the rapid determination of H2S by differential pulse voltammetry (DPV). In 0.1 M PBS (pH 7.0), the detection limit of H2S is as low as 0.03 μM, the linear range is 0.1–10 μM, and the response time is about 7 s. In addition, this method exhibits good stability and reproducibility, which can be applied to the rapid detection of H2S in mine water samples. This study provides a reference for the development of new detection methods for H2S in various complex environments.
Open AccessUltra-Sensitive Electrochemical H2S Sensor Based on Au NP-Decorated 2D Porphyrin MOF Nanocomposite
Hydrogen sulfide (H2S) is a contaminant for water quality, which can affect the eyes, respiratory system, and central nervous system, and may also cause damage to multiple organs such as the heart. Therefore, rapid and sensitive detection of trace H2S is of great importance. In this work, a novel gold nanoparticle/2D porphyrin metal–organic framework nanocomposite (Au NPs/2D Cu-TCPP MOF) was prepared, and a novel electrochemical sensing method was established for the rapid determination of H2S by differential pulse voltammetry (DPV). In 0.1 M PBS (pH 7.0), the detection limit of H2S is as low as 0.03 μM, the linear range is 0.1–10 μM, and the response time is about 7 s. In addition, this method exhibits good stability and reproducibility, which can be applied to the rapid detection of H2S in mine water samples. This study provides a reference for the development of new detection methods for H2S in various complex environments.
- Open Access
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Magnetically controlled electrochemical/visual colorimetric biosensor for ultrasensitive detection of aflatoxin B1 in peanuts based on a novel H-shaped reactor triggered dual signal amplification
Sensitive and efficient detection of trace AFB1 is of great significance for early intervention in protection of food and environmental safety. In this research, a novel magnetically controlled electrochemical-visual colorimetric dual-mode AFB1 biosensing strategy was developed based on nanochannels segmented H-shaped reactor and dual signal amplification techniques. The proposed method possesses the following advantages: First, it achieves spatial separation of AFB1 recognition and detection, thereby effectively reducing interference from complex sample; Second, the two signal amplification techniques based on hybridization chain reaction (HCR) and enzyme cascade catalysis significantly enhance the sensitivity; Third, the dual-mode detection capability enables the method to adapt to different application scenarios. Using the electrochemical mode, the method achieved low limit of detection (LOD) of 4.2 × 10−7 ng mL−1, wide linear range of 10-6-102 ng mL−1, excellent selectivity and anti-interference performance. Using the visual colorimetric mode, the LOD was as low as 3.4 × 10−7 ng mL−1 and the linear range was 10-6-104 ng mL−1. This work proposes a generalizable dual-mode biosensing strategy and provides a promising approach for highly sensitive and efficient detection of trace-level targets in complex samples.
- 28 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMagnetically controlled electrochemical/visual colorimetric biosensor for ultrasensitive detection of aflatoxin B1 in peanuts based on a novel H-shaped reactor triggered dual signal amplification
Sensitive and efficient detection of trace AFB1 is of great significance for early intervention in protection of food and environmental safety. In this research, a novel magnetically controlled electrochemical-visual colorimetric dual-mode AFB1 biosensing strategy was developed based on nanochannels segmented H-shaped reactor and dual signal amplification techniques. The proposed method possesses the following advantages: First, it achieves spatial separation of AFB1 recognition and detection, thereby effectively reducing interference from complex sample; Second, the two signal amplification techniques based on hybridization chain reaction (HCR) and enzyme cascade catalysis significantly enhance the sensitivity; Third, the dual-mode detection capability enables the method to adapt to different application scenarios. Using the electrochemical mode, the method achieved low limit of detection (LOD) of 4.2 × 10−7 ng mL−1, wide linear range of 10-6-102 ng mL−1, excellent selectivity and anti-interference performance. Using the visual colorimetric mode, the LOD was as low as 3.4 × 10−7 ng mL−1 and the linear range was 10-6-104 ng mL−1. This work proposes a generalizable dual-mode biosensing strategy and provides a promising approach for highly sensitive and efficient detection of trace-level targets in complex samples.
- 20 February 2026
- Published by Elsevier in Food Chemistry
- Vol. 509, 148506
Magnetic controlled label-free homogeneous electrochemical biosensing of aflatoxin B1 based on Nanochannel-gated signal amplification strategy
- 20 February 2026
- Published by Elsevier in Food Chemistry
- Vol. 509, 148506
Magnetic controlled label-free homogeneous electrochemical biosensing of aflatoxin B1 based on Nanochannel-gated signal amplification strategy
- Open Access
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
High-density mycelium-based biofoam from agricultural residues: Structure–property relationships and multifunctional insulation performance
A high-density mycelium-based biofoam (MBB) was firstly fabricated from agricultural residues through a two-step solid-state fermentation using Ganoderma lingzhi. The resulting biofoam exhibits a well-integrated porous architecture formed by an interconnected mycelial network, leading to enhanced structural integrity. Comprehensive characterization demonstrated improved physicochemical properties, including reduced lignocellulosic crystallinity, increased specific surface area, and a hierarchical mesoporous structure. MBB exhibits ultra-high compressive strength without premature failure and outstanding thermal insulation. Infrared imaging confirms significantly delayed heat penetration, with an insulation duration 2–3 times longer than reported biofoams and ~13 times longer than commercial insulation. Combined with stable hydrophobicity, long-term water resistance, low microbial load under standard conditions, and effective sound insulation comparable to commercial materials, this MBB—derived from renewable feedstocks and fully biodegradable—represents a highly sustainable and high-performance alternative to petroleum-based foams for building insulation and packaging applications.
- 11 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHigh-density mycelium-based biofoam from agricultural residues: Structure–property relationships and multifunctional insulation performance
A high-density mycelium-based biofoam (MBB) was firstly fabricated from agricultural residues through a two-step solid-state fermentation using Ganoderma lingzhi. The resulting biofoam exhibits a well-integrated porous architecture formed by an interconnected mycelial network, leading to enhanced structural integrity. Comprehensive characterization demonstrated improved physicochemical properties, including reduced lignocellulosic crystallinity, increased specific surface area, and a hierarchical mesoporous structure. MBB exhibits ultra-high compressive strength without premature failure and outstanding thermal insulation. Infrared imaging confirms significantly delayed heat penetration, with an insulation duration 2–3 times longer than reported biofoams and ~13 times longer than commercial insulation. Combined with stable hydrophobicity, long-term water resistance, low microbial load under standard conditions, and effective sound insulation comparable to commercial materials, this MBB—derived from renewable feedstocks and fully biodegradable—represents a highly sustainable and high-performance alternative to petroleum-based foams for building insulation and packaging applications.
- 6 May 2025
- Published by Elsevier in Food Chemistry
- Vol. 486, 144661
Prediction and metabolomics reveal aroma profiles of mead aged in glass bottle and oak barrels
- 6 May 2025
- Published by Elsevier in Food Chemistry
- Vol. 486, 144661
Prediction and metabolomics reveal aroma profiles of mead aged in glass bottle and oak barrels
- 14 May 2022
- Published by Elsevier in Chemical Engineering Journal
- Vol. 446
Ultrasensitive electrochemical determination of bisphenol A in food samples based on a strategy for activity enhancement of enzyme: Layer-by-layer self-assembly of tyrosinase between two-dimensional porphyrin metal–organic framework nanofilms
- 14 May 2022
- Published by Elsevier in Chemical Engineering Journal
- Vol. 446
Ultrasensitive electrochemical determination of bisphenol A in food samples based on a strategy for activity enhancement of enzyme: Layer-by-layer self-assembly of tyrosinase between two-dimensional porphyrin metal–organic framework nanofilms
- Open Access
- 1 February 2022
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 198, 113915
Corrigendum to “A novel self-cleaning electrochemical biosensor integrating copper porphyrin-derived metal-organic framework nanofilms, G-quadruplex, and DNA nanomotors for achieving cyclic detection of lead ions” [Biosensors and Bioelectronics 197 (2022) 113801]
- 1 February 2022
- Published by Elsevier in Biosensors and Bioelectronics
- Vol. 198, 113915
Open AccessCorrigendum to “A novel self-cleaning electrochemical biosensor integrating copper porphyrin-derived metal-organic framework nanofilms, G-quadruplex, and DNA nanomotors for achieving cyclic detection of lead ions” [Biosensors and Bioelectronics 197 (2022) 113801]
- 8 December 2021
- Published by Springer Nature in Microchimica Acta
- Vol. 189 (1) , 1-11
Electrochemical dopamine sensor based on bi-metallic Co/Zn porphyrin metal–organic framework
Integrating other metal ions into mono-metallic metal–organic framework (MOF) to form bi-metallic MOF is an effective strategy to enhance the performance of MOFs from the internal structure. In this study, two-dimensional (2D) cobalt/zinc-porphyrin (Co/Zn-TCPP) MOF nanomaterials with different Co/Zn molar ratios were synthesised using a simple surfactant-assisted method, and novel dopamine (DA) sensing methods were constructed based on these materials. The characterisation results showed that all MOF with different Co/Zn molar ratios presented a nanofilm, and the Co and Zn elements were uniformly distributed. All sensors based on CoxZn100−x-TCPP had a certain catalytic performance to DA. Among them, the sensor based on CO25Zn75-TCPP showed the strongest signal response, indicating that the catalytic performance of MOF on DA can be adjusted by changing the Co/Zn molar ratio. The doping of metal ions improves the chemical environment of the pores, and increases the types and spatial arrangement of the active sites of the MOF, which is beneficial to the electron transfer and exchange with DA; Co2+ and Zn2+ active centres have a synergistic promotion effect, so the catalytic activity of MOF is significantly improved. The linear range at the potential of 0.1 V based on Co25Zn75-TCPP for DA was 5 nM–177.8 μM, with a detection limit of 1.67 nM (S/N = 3). The sensor exhibited a good selectivity for detecting DA. This research is expected to provide new ideas and references for constructing high-performance sensing interfaces and platforms. Graphical abstract
- 8 December 2021
- Published by Springer Nature in Microchimica Acta
- Vol. 189 (1) , 1-11
Electrochemical dopamine sensor based on bi-metallic Co/Zn porphyrin metal–organic framework
Integrating other metal ions into mono-metallic metal–organic framework (MOF) to form bi-metallic MOF is an effective strategy to enhance the performance of MOFs from the internal structure. In this study, two-dimensional (2D) cobalt/zinc-porphyrin (Co/Zn-TCPP) MOF nanomaterials with different Co/Zn molar ratios were synthesised using a simple surfactant-assisted method, and novel dopamine (DA) sensing methods were constructed based on these materials. The characterisation results showed that all MOF with different Co/Zn molar ratios presented a nanofilm, and the Co and Zn elements were uniformly distributed. All sensors based on CoxZn100−x-TCPP had a certain catalytic performance to DA. Among them, the sensor based on CO25Zn75-TCPP showed the strongest signal response, indicating that the catalytic performance of MOF on DA can be adjusted by changing the Co/Zn molar ratio. The doping of metal ions improves the chemical environment of the pores, and increases the types and spatial arrangement of the active sites of the MOF, which is beneficial to the electron transfer and exchange with DA; Co2+ and Zn2+ active centres have a synergistic promotion effect, so the catalytic activity of MOF is significantly improved. The linear range at the potential of 0.1 V based on Co25Zn75-TCPP for DA was 5 nM–177.8 μM, with a detection limit of 1.67 nM (S/N = 3). The sensor exhibited a good selectivity for detecting DA. This research is expected to provide new ideas and references for constructing high-performance sensing interfaces and platforms. Graphical abstract