Lars Heuken
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lars Heuken has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Alessandro Ottaviani
New Semiconductor Devices Institut für Mikroelektronik Stuttgart Allmandring 30 A Stuttgart 70569 Germany
3 shared publicationsJoachim N. Burghartz
New Semiconductor Devices Institut für Mikroelektronik Stuttgart Allmandring 30 A Stuttgart 70569 Germany
3 shared publications- Andrei Vescan
Compound Semiconductor Technology (CST) RWTH Aachen University Aachen Germany
2 shared publications Dirk Fahle
Corporate Research & Development AIXTRON SE Dornkaulstr. 2 Herzogenrath 52134 Germany
2 shared publications- Joachim N. Burghartz
Institute for Microelectronics Stuttgart (IMS CHIPS) Allmandring 30A 70569 Stuttgart Germany
2 shared publications - Michael Heuken
Compound Semiconductor Technology (CST) RWTH Aachen University Aachen Germany
2 shared publications
Latest Publications
- 13 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (3) , 1113-1119
Analysis of an AlGaN/AlN Super-Lattice Buffer Concept for 650-V Low-Dispersion and High-Reliability GaN HEMTs
In this article, an optimized carbon-doped AlGaN/AlN super-lattice (SL) buffer structure for GaN-based high electron mobility transistors, grown on 200-mm Si wafers is demonstrated. The resulting transistor structure features: 1) maximum vertical breakdown strength as high as 2.72 MV/cm, 2) vertical breakdown voltages (BVs) above 1.2 kV, 3) lateral BVs above 2.2 kV, 4) reduction in buffer traps, which is expected to result in low-dynamic $RON, and 5) more than 50 years of extrapolated lifetime at 150°C under 650-V bias. These were achieved by optimizing growth parameters by systematically varying the SL growth temperature, SL carbon-doping, ammonia flow, and SL pair count with adjusting the total buffer thickness. The detailed analysis shows fundamental improvements compared to a conventional carbon-doped (Al)GaN staircase buffer with the same thickness and comparable growth time.
- 13 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (3) , 1113-1119
Analysis of an AlGaN/AlN Super-Lattice Buffer Concept for 650-V Low-Dispersion and High-Reliability GaN HEMTs
In this article, an optimized carbon-doped AlGaN/AlN super-lattice (SL) buffer structure for GaN-based high electron mobility transistors, grown on 200-mm Si wafers is demonstrated. The resulting transistor structure features: 1) maximum vertical breakdown strength as high as 2.72 MV/cm, 2) vertical breakdown voltages (BVs) above 1.2 kV, 3) lateral BVs above 2.2 kV, 4) reduction in buffer traps, which is expected to result in low-dynamic $RON, and 5) more than 50 years of extrapolated lifetime at 150°C under 650-V bias. These were achieved by optimizing growth parameters by systematically varying the SL growth temperature, SL carbon-doping, ammonia flow, and SL pair count with adjusting the total buffer thickness. The detailed analysis shows fundamental improvements compared to a conventional carbon-doped (Al)GaN staircase buffer with the same thickness and comparable growth time.
- Open Access
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (2) , 455-462
Consistent Surface-Potential-Based Modeling of Drain and Gate Currents in AlGaN/GaN HEMTs
In this article, the gate current in AlGaN/GaN high-electron mobility transistors is modeled in a surface potential-based compact model. The thermionic emission, the Poole-Frenkel emission, and the Fowler-Nordheim tunneling are the dominant mechanisms for the gate current in the forward- and reverse-bias regions. These conduction mechanisms are modeled within the framework of the ASM-GaN compact model, which is a physics-based industry-standard model for GaN HEMTs, hence yielding a consistent model for the drain and gate currents. The proposed model captures the gate voltage, drain voltage, temperature, and gate-length dependencies of the gate current. The results of dc gate-leakage measurements of two GaN HEMT, differing only in terms of gate length, over a wide range of temperature, showing these current-conduction mechanisms, are presented, and the proposed model is validated accordingly. The developed gate current model, implemented in Verilog-A, is in excellent agreement with the experimental data.
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (2) , 455-462
Open AccessConsistent Surface-Potential-Based Modeling of Drain and Gate Currents in AlGaN/GaN HEMTs
In this article, the gate current in AlGaN/GaN high-electron mobility transistors is modeled in a surface potential-based compact model. The thermionic emission, the Poole-Frenkel emission, and the Fowler-Nordheim tunneling are the dominant mechanisms for the gate current in the forward- and reverse-bias regions. These conduction mechanisms are modeled within the framework of the ASM-GaN compact model, which is a physics-based industry-standard model for GaN HEMTs, hence yielding a consistent model for the drain and gate currents. The proposed model captures the gate voltage, drain voltage, temperature, and gate-length dependencies of the gate current. The results of dc gate-leakage measurements of two GaN HEMT, differing only in terms of gate length, over a wide range of temperature, showing these current-conduction mechanisms, are presented, and the proposed model is validated accordingly. The developed gate current model, implemented in Verilog-A, is in excellent agreement with the experimental data.
- 8 November 2019
- Published by Wiley in Physica Status Solidi (a)
- Vol. 217 (7)
Limitations for Reliable Operation at Elevated Temperatures of Al2O3/AlGaN/GaN Metal–Insulator–Semiconductor High‐Electron‐Mobility Transistors Grown by Metal‐Organic Chemical Vapor Deposition on Silicon Substrate
Herein, the gate degradation mechanisms of gallium nitride (GaN)‐based metal–insulator–semiconductor high‐electron‐mobility transistors (MISHEMTs) utilizing Al2O3 grown by plasma‐enhanced atomic layer deposition (PEALD) are systematically investigated. By applying constant voltage stress and the time‐dependent dielectric breakdown (TDDB) methodology under variation of bias and temperature, an activation energy of 1.25 eV for the time to breakdown and a 1/E model extrapolating the lifetime are found. A maximum gate operation voltage at 298 K of 4.9 V is extrapolated, which decreases to a projected voltage of 3.5 V at 598 K operation temperature, due to an accelerated defect generation. The physical origin of the TDDB of Al2O3 is related to the formation of a percolation path by randomly generated defects in the oxide under stress bias. This mechanism, which also requires the presence of an initial defect density in Al2O3, is confirmed by Monte Carlo simulations, which are in agreement with the experimental data.
- 8 November 2019
- Published by Wiley in Physica Status Solidi (a)
- Vol. 217 (7)
Limitations for Reliable Operation at Elevated Temperatures of Al2O3/AlGaN/GaN Metal–Insulator–Semiconductor High‐Electron‐Mobility Transistors Grown by Metal‐Organic Chemical Vapor Deposition on Silicon Substrate
Herein, the gate degradation mechanisms of gallium nitride (GaN)‐based metal–insulator–semiconductor high‐electron‐mobility transistors (MISHEMTs) utilizing Al2O3 grown by plasma‐enhanced atomic layer deposition (PEALD) are systematically investigated. By applying constant voltage stress and the time‐dependent dielectric breakdown (TDDB) methodology under variation of bias and temperature, an activation energy of 1.25 eV for the time to breakdown and a 1/E model extrapolating the lifetime are found. A maximum gate operation voltage at 298 K of 4.9 V is extrapolated, which decreases to a projected voltage of 3.5 V at 598 K operation temperature, due to an accelerated defect generation. The physical origin of the TDDB of Al2O3 is related to the formation of a percolation path by randomly generated defects in the oxide under stress bias. This mechanism, which also requires the presence of an initial defect density in Al2O3, is confirmed by Monte Carlo simulations, which are in agreement with the experimental data.
- Open Access
- 14 May 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SC) , SCCD11
Temperature dependent lateral and vertical conduction mechanisms in AlGaN/GaN HEMT on thinned silicon substrate
This paper presents the influence of Si substrate thinning by grinding and dicing on the mechanical and electrical properties of AlGaN/GaN HEMT grown on 6-inch Si substrate. By experimentally removing 96% of the Si substrate, an increase in the lateral breakdown voltage by 13% is achieved for a wide temperature range. A decreasing vertical breakdown voltage with substrate thinning shows the necessity of substrate replacement to maintain the vertical isolation. Poole-Frenkel and space charge limited conduction mechanisms are identified for the vertical leakage in forward and reverse bias down to thicknesses of 200 μ m, respectively. The increase in chip bow and the resulting increase in tensile strain in the epitaxial layers resulting from the substrate removal are correlated to a 40% decrease in 2DEG charge carrier concentration along with a 27% increase in threshold voltage. These findings are explained by strain-induced gate barrier and polarization charge variations.
- 14 May 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SC) , SCCD11
Open AccessTemperature dependent lateral and vertical conduction mechanisms in AlGaN/GaN HEMT on thinned silicon substrate
This paper presents the influence of Si substrate thinning by grinding and dicing on the mechanical and electrical properties of AlGaN/GaN HEMT grown on 6-inch Si substrate. By experimentally removing 96% of the Si substrate, an increase in the lateral breakdown voltage by 13% is achieved for a wide temperature range. A decreasing vertical breakdown voltage with substrate thinning shows the necessity of substrate replacement to maintain the vertical isolation. Poole-Frenkel and space charge limited conduction mechanisms are identified for the vertical leakage in forward and reverse bias down to thicknesses of 200 μ m, respectively. The increase in chip bow and the resulting increase in tensile strain in the epitaxial layers resulting from the substrate removal are correlated to a 40% decrease in 2DEG charge carrier concentration along with a 27% increase in threshold voltage. These findings are explained by strain-induced gate barrier and polarization charge variations.
- 6 September 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 216 (1)
Temperature Dependent Vertical Conduction of GaN HEMT Structures on Silicon and Bulk GaN Substrates
- 6 September 2018
- Published by Wiley in Physica Status Solidi (a)
- Vol. 216 (1)
Temperature Dependent Vertical Conduction of GaN HEMT Structures on Silicon and Bulk GaN Substrates