Dler M. Salh Shwan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dler M. Salh Shwan has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Stephan Kaufhold
BGR, Bundesanstalt für Geowissenschaften und Rohstoffe
4 shared publications Bakhtyar K. Aziz
Department of Nano-Science and Applied Chemistry, College of Medicals and Applied Sciences, Charmo University, Chamchamal, Iraq
3 shared publications- Bakhtyar Kamal Aziz
Department of Chemistry, College of Science, Charmo University, Chamchamal, Iraq
3 shared publications - Bzhwen Khalid Majeed
Natural Resources Department, College of Agricultural Engineering Sciences, University of Sulaimani, Bakrajo Campus, Awal Street, Kurdistan Region, Sulaymaniyah, 46001, Iraq
2 shared publications Khasraw Abdullah Rashid
Natural Resources Department, College of Agricultural Engineering Sciences, University of Sulaimani, Bakrajo Campus, Awal Street, Kurdistan Region, Sulaymaniyah, 46001, Iraq
2 shared publicationsRezan Omer Rasheed
College of Science, Department of Chemistry, University of Sulaimani, Sulaimani, Iraq
2 shared publications
Latest Publications
- 13 June 2026
- Published by Springer Nature in BioNanoScience
- Vol. 16 (6) , 424
Preparation, Characterization, and Antimicrobial Evaluation of Olive Stone Biochar
- 13 June 2026
- Published by Springer Nature in BioNanoScience
- Vol. 16 (6) , 424
Preparation, Characterization, and Antimicrobial Evaluation of Olive Stone Biochar
- Open Access
An Evaluation of the Influence of Natural Clay and Natural Clay/TiO2 Nanocomposites on the Color Stability of Heat-Polymerized Maxillofacial Silicone After Disinfection
This study aimed to investigate the effect of time and different disinfecting agents on nanocomposite filler composed of natural clay nanoparticles (modified and non-modified) added to maxillofacial silicone elastomers and readymade pigment additives. A total of 360 disk-shaped samples were divided into nine pigment-based groups, each with four subgroups (n = 10) exposed to different disinfectants: distilled water, 1% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), and effervescent tablets. Color changes (ΔE) were measured before and after disinfection using a colorimeter. The ΔE values were assessed against perceptibility (ΔE = 1.1) and acceptability (ΔE = 3) thresholds. Nanoclay additives were also characterized using FTIR, XRD and EDX. Statistical analysis, including ANOVA and post hoc HSD tests, revealed that while all samples exhibited some color change, most remained below the acceptability threshold. Colorless silicone showed minimal, non-significant change according to perceptibility threshold (ΔE = 1.1). Blue pigments displayed significant change only with effervescent tablets. Red and mixed pigments showed perceptible changes with NaOCl, CHX, and effervescent tablets. However, nanoclay-containing specimens showed no significant perceptible alterations. Overall, despite minor perceptible changes in some pigments, all disinfecting agents tested resulted in color differences below the acceptability threshold, indicating their safe use for disinfecting maxillofacial silicone materials without compromising esthetics. Nevertheless, nanoclays are more reliable agents for the pigmentation of maxillofacial silicone as they show non-significant chromatic alteration.
Open AccessAn Evaluation of the Influence of Natural Clay and Natural Clay/TiO2 Nanocomposites on the Color Stability of Heat-Polymerized Maxillofacial Silicone After Disinfection
This study aimed to investigate the effect of time and different disinfecting agents on nanocomposite filler composed of natural clay nanoparticles (modified and non-modified) added to maxillofacial silicone elastomers and readymade pigment additives. A total of 360 disk-shaped samples were divided into nine pigment-based groups, each with four subgroups (n = 10) exposed to different disinfectants: distilled water, 1% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), and effervescent tablets. Color changes (ΔE) were measured before and after disinfection using a colorimeter. The ΔE values were assessed against perceptibility (ΔE = 1.1) and acceptability (ΔE = 3) thresholds. Nanoclay additives were also characterized using FTIR, XRD and EDX. Statistical analysis, including ANOVA and post hoc HSD tests, revealed that while all samples exhibited some color change, most remained below the acceptability threshold. Colorless silicone showed minimal, non-significant change according to perceptibility threshold (ΔE = 1.1). Blue pigments displayed significant change only with effervescent tablets. Red and mixed pigments showed perceptible changes with NaOCl, CHX, and effervescent tablets. However, nanoclay-containing specimens showed no significant perceptible alterations. Overall, despite minor perceptible changes in some pigments, all disinfecting agents tested resulted in color differences below the acceptability threshold, indicating their safe use for disinfecting maxillofacial silicone materials without compromising esthetics. Nevertheless, nanoclays are more reliable agents for the pigmentation of maxillofacial silicone as they show non-significant chromatic alteration.
- 18 February 2026
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (3) , 2155-2180
Adsorptive removal of glyphosate using a bentonite–biochar composite: characterization, mechanism, and environmental application
- 18 February 2026
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (3) , 2155-2180
Adsorptive removal of glyphosate using a bentonite–biochar composite: characterization, mechanism, and environmental application
- 25 October 2025
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (2) , 1467-1495
Methylene blue removal by natural clay adsorbent: equilibrium, kinetic and thermodynamic analyses in batch and fixed-bed systems
- 25 October 2025
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (2) , 1467-1495
Methylene blue removal by natural clay adsorbent: equilibrium, kinetic and thermodynamic analyses in batch and fixed-bed systems
- 11 August 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (9) , 2982-3001
An eco-friendly approach to soil remediation: evaluating clay–biochar composite for used motor oil removal through kinetic, isotherm, and thermodynamic models
This study investigates the efficiency of the Clay–Biochar Composite (CBC) in the remediation of soil contaminated by used motor oil (UMO). The CBC was synthesized through the carbonization of acid-activated bentonite (AC) [derived from natural bentonite clay (NC)], which was combined with Loquat Seed Biochar (LSB) [derived from Raw Loquat Seed (RLS)]. Comprehensive characterization for NC, AC, RLS, LSB, and CBC to assess their physicochemical properties and potential for UMO adsorption was conducted via Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) analysis techniques. Additionally, the effects of adsorption parameters such as (UMO) concentration, adsorption time, and adsorbent dosage on removal efficiency were studied. At an optimal dose of 0.3 g and 50 °C, with a contact duration of 300 minutes, the CBC removed 99.89% of oil, reaching a maximum adsorption capacity of 41.62 mg g−1. The results indicated that the Freundlich isotherm (R2 = 0.995) and second-order kinetic models (R2 = 0.996) more effectively fitted to describe UMO adsorption, suggesting that multilayer adsorption was involved. Also, thermodynamic analysis showed that motor oil adsorption is spontaneous and endothermic. The ΔG° values ranged from −16.05 to −17.69 kJ mol−1, with a positive ΔH° of 19.23 J mol−1 and a ΔS° of 54.84 J mol−1. K indicates increased randomness at the solid–liquid interface. Real-world experiments, which involved examining actual contaminated soil samples, validated the practical applicability of the CBC for UMO remediation. The CBC established the possibility of reuse, achieving 90% oil desorption. These results showed that the CBC significantly enhanced adsorption affinity, highlighting its potential as a cost-effective and eco-friendly adsorbent for oil pollution remediation.
- 11 August 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (9) , 2982-3001
An eco-friendly approach to soil remediation: evaluating clay–biochar composite for used motor oil removal through kinetic, isotherm, and thermodynamic models
This study investigates the efficiency of the Clay–Biochar Composite (CBC) in the remediation of soil contaminated by used motor oil (UMO). The CBC was synthesized through the carbonization of acid-activated bentonite (AC) [derived from natural bentonite clay (NC)], which was combined with Loquat Seed Biochar (LSB) [derived from Raw Loquat Seed (RLS)]. Comprehensive characterization for NC, AC, RLS, LSB, and CBC to assess their physicochemical properties and potential for UMO adsorption was conducted via Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) analysis techniques. Additionally, the effects of adsorption parameters such as (UMO) concentration, adsorption time, and adsorbent dosage on removal efficiency were studied. At an optimal dose of 0.3 g and 50 °C, with a contact duration of 300 minutes, the CBC removed 99.89% of oil, reaching a maximum adsorption capacity of 41.62 mg g−1. The results indicated that the Freundlich isotherm (R2 = 0.995) and second-order kinetic models (R2 = 0.996) more effectively fitted to describe UMO adsorption, suggesting that multilayer adsorption was involved. Also, thermodynamic analysis showed that motor oil adsorption is spontaneous and endothermic. The ΔG° values ranged from −16.05 to −17.69 kJ mol−1, with a positive ΔH° of 19.23 J mol−1 and a ΔS° of 54.84 J mol−1. K indicates increased randomness at the solid–liquid interface. Real-world experiments, which involved examining actual contaminated soil samples, validated the practical applicability of the CBC for UMO remediation. The CBC established the possibility of reuse, achieving 90% oil desorption. These results showed that the CBC significantly enhanced adsorption affinity, highlighting its potential as a cost-effective and eco-friendly adsorbent for oil pollution remediation.
- Top Cited Papers
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (3) , 526-548
A review on environmental contamination of petroleum hydrocarbons, its effects and remediation approaches
This review provides valuable insights into environmental contamination caused by petroleum hydrocarbons and contributes to the development of effective remediation strategies.
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (3) , 526-548
Top Cited PapersA review on environmental contamination of petroleum hydrocarbons, its effects and remediation approaches
This review provides valuable insights into environmental contamination caused by petroleum hydrocarbons and contributes to the development of effective remediation strategies.
- 28 August 2023
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 136 (5) , 2691-2710
Green and efficient: investigating modified and non-modified walnut shells for heavy metal ion removal in clinical dental sewage treatment
- 28 August 2023
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 136 (5) , 2691-2710
Green and efficient: investigating modified and non-modified walnut shells for heavy metal ion removal in clinical dental sewage treatment
- 29 July 2023
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 136 (4) , 2223-2242
Enhancing zinc(II) removal from Sulaymaniyah industrial zone sewage using novel adsorbents: a comprehensive study of natural clay, acid/base activated clay, and titanium pillared clay: insights into kinetics and thermodynamics
- 29 July 2023
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 136 (4) , 2223-2242
Enhancing zinc(II) removal from Sulaymaniyah industrial zone sewage using novel adsorbents: a comprehensive study of natural clay, acid/base activated clay, and titanium pillared clay: insights into kinetics and thermodynamics
- Open Access
- 1 January 2023
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2023
Adsorption Study and Removal of Basic Fuchsin Dye from Medical Laboratory Wastewater Using Local Natural Clay
Local natural clay from Sulaimani zone-Takiya (TKC), Kurdistan Region of Iraq, was characterized and used for the removal of basic fuchsin (BF) dye from laboratory bacterial wastewater. The characterization of the adsorbent was carried out with XRD, XRF, and FT-IR. The clay sample was dominated by vermiculite. Adsorption tests under different conditions of contact time, pH of the solution, temperature, initial dye concentration, and adsorbent amount were performed to analyze the effect of various experimental parameters. Equilibrium time was reached within 180 minutes, and maximum BF adsorption was achieved at pH 6.8 at a temperature ranging from 20 to 50°C. The experimental data fitted the pseudo-second-order kinetic model, with the activation energy of 22.68 kJ·mol-1. Adsorption isotherms could be well-fitted by the Langmuir isotherm model. The thermodynamic parameters such as [ ], [ ], and [ ] were determined, and the negative values of [ ] indicated that adsorption was spontaneous at all temperatures. Furthermore, the values of [ ] indicated an endothermic reaction. Wastewater contaminated by BF dye from the bacterial laboratory was collected (BF concentration: 160 mg·L-1) and treated by TKC. The resulting concentration of BF after adsorption was 4.76 mg·L-1. The maximum amount of dye adsorbed is about 149.2 mg/g or 0.44 mmol/g, which is close to the range of the cation exchange capacity (CEC) value of the vermiculite which indicated that cation exchange was the dominant adsorption mechanism.
- 1 January 2023
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2023
Open AccessAdsorption Study and Removal of Basic Fuchsin Dye from Medical Laboratory Wastewater Using Local Natural Clay
Local natural clay from Sulaimani zone-Takiya (TKC), Kurdistan Region of Iraq, was characterized and used for the removal of basic fuchsin (BF) dye from laboratory bacterial wastewater. The characterization of the adsorbent was carried out with XRD, XRF, and FT-IR. The clay sample was dominated by vermiculite. Adsorption tests under different conditions of contact time, pH of the solution, temperature, initial dye concentration, and adsorbent amount were performed to analyze the effect of various experimental parameters. Equilibrium time was reached within 180 minutes, and maximum BF adsorption was achieved at pH 6.8 at a temperature ranging from 20 to 50°C. The experimental data fitted the pseudo-second-order kinetic model, with the activation energy of 22.68 kJ·mol-1. Adsorption isotherms could be well-fitted by the Langmuir isotherm model. The thermodynamic parameters such as [ ], [ ], and [ ] were determined, and the negative values of [ ] indicated that adsorption was spontaneous at all temperatures. Furthermore, the values of [ ] indicated an endothermic reaction. Wastewater contaminated by BF dye from the bacterial laboratory was collected (BF concentration: 160 mg·L-1) and treated by TKC. The resulting concentration of BF after adsorption was 4.76 mg·L-1. The maximum amount of dye adsorbed is about 149.2 mg/g or 0.44 mmol/g, which is close to the range of the cation exchange capacity (CEC) value of the vermiculite which indicated that cation exchange was the dominant adsorption mechanism.