Kelly Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kelly Liang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Ananth Dodabalapur
Department of Electrical and Computer Engineering University of Texas at Austin 78712 Austin TX USA
4 shared publications - Calla Mae McCulley
The University of Texas at Austin
3 shared publications - Xin Xu
Universal Display Corporation, Ewing, NJ, USA
3 shared publications Liang Wang
2 shared publications- Yuchen Zhou
Department of Electrical and Computer Engineering, University of Texas at Austin, Austin, Texas 78712, United States
2 shared publications Jaydeep Kulkarni
Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, TX 78712, USA
1 shared publication
Latest Publications
- 31 August 2022
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 7 (3) , 035015
High-performance thin-film transistor device architecture for flexible and printed electronics
A device design paradigm for thin-film transistors (TFTs) suitable for fabrication using methods available for flexible and printed electronics devices and circuits is described. The TFT architecture utilizes an array of nanospike-shaped electrodes as the source and drain electrodes. This results in improved carrier injection, greater gate control of the drain current, and lower threshold and operating voltage. The on-currents are also higher in comparison with standard flat edge electrode TFTs with equivalent channel dimensions. Importantly, the design is very tolerant of thick gate insulators. The proposed architecture requires one level of relatively high resolution patterning of the source and drain contacts, which can be potentially realized with methods that have been previously employed in flexible electronics such as nanoimprint lithography or roll-to-roll photolithography. The experimental data presented in this paper were obtained from TFTs fabricated using conventional fabrication methods, as the emphasis in this paper is on the device design and in demonstrating the advantageous features of the new architecture in future flexible systems.
- 31 August 2022
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 7 (3) , 035015
High-performance thin-film transistor device architecture for flexible and printed electronics
A device design paradigm for thin-film transistors (TFTs) suitable for fabrication using methods available for flexible and printed electronics devices and circuits is described. The TFT architecture utilizes an array of nanospike-shaped electrodes as the source and drain electrodes. This results in improved carrier injection, greater gate control of the drain current, and lower threshold and operating voltage. The on-currents are also higher in comparison with standard flat edge electrode TFTs with equivalent channel dimensions. Importantly, the design is very tolerant of thick gate insulators. The proposed architecture requires one level of relatively high resolution patterning of the source and drain contacts, which can be potentially realized with methods that have been previously employed in flexible electronics such as nanoimprint lithography or roll-to-roll photolithography. The experimental data presented in this paper were obtained from TFTs fabricated using conventional fabrication methods, as the emphasis in this paper is on the device design and in demonstrating the advantageous features of the new architecture in future flexible systems.
- 3 August 2022
- Published by Elsevier in Organic Electronics
- Vol. 109
Contact resistance in sub-micron and nanoscale organic thin-film transistors
- 3 August 2022
- Published by Elsevier in Organic Electronics
- Vol. 109
Contact resistance in sub-micron and nanoscale organic thin-film transistors
- Open Access
- 28 January 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (4) , eabm1154
Nanospike electrodes and charge nanoribbons: A new design for nanoscale thin-film transistors
To scale down thin-film transistor (TFT) channel lengths for accessing higher levels of speed and performance, a redesign of the basic device structure is necessary. With nanospike-shaped electrodes, field-emission effects can be used to assist charge injection from the electrodes in sub–200-nm channel length amorphous oxide and organic TFTs. These designs result in the formation of charge nanoribbons at low gate biases that greatly improve subthreshold and turn-off characteristics. A design paradigm in which the gate electric field can be less than the source-drain field is proposed and demonstrated. By combining small channel lengths and thick gate dielectrics, this approach is also shown to be a promising solution for boosting TFT performance through charge focusing and charge nanoribbon formation in flexible/printed electronics applications.
- 28 January 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (4) , eabm1154
Open AccessNanospike electrodes and charge nanoribbons: A new design for nanoscale thin-film transistors
To scale down thin-film transistor (TFT) channel lengths for accessing higher levels of speed and performance, a redesign of the basic device structure is necessary. With nanospike-shaped electrodes, field-emission effects can be used to assist charge injection from the electrodes in sub–200-nm channel length amorphous oxide and organic TFTs. These designs result in the formation of charge nanoribbons at low gate biases that greatly improve subthreshold and turn-off characteristics. A design paradigm in which the gate electric field can be less than the source-drain field is proposed and demonstrated. By combining small channel lengths and thick gate dielectrics, this approach is also shown to be a promising solution for boosting TFT performance through charge focusing and charge nanoribbon formation in flexible/printed electronics applications.
- 18 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (6) , 2606-2613
Analysis of the Advantages of Nanostripe-Channel Geometries for Thin-Film Transistors
We analyze the operation of thin-film transistor (TFT) devices where the active semiconductor is patterned into nanostripes (NSs). It is shown that using relatively large separations between stripes can improve current drive capability by more than a factor of 13 for many of the important material families of disordered and solution-processable TFTs. When comparing NS TFTs to unpatterned TFTs under the same operating conditions, NS devices show enhancements in peak carrier density and conductivity along the edges of the stripe. In addition to increasing the drive current, these carrier density enhancements are large enough to potentially lower the contact resistance. Short-channel effects are also greatly reduced, allowing the possibility of scaling down channel lengths for improved operation at high frequencies. This architecture will work especially well for TFT materials in which the mobility increases with carrier density, a common feature in many organic, polymer, and amorphous metal oxide semiconductors. The results of our analysis on NS TFTs not only make TFTs considerably more attractive for existing optoelectronic applications but NS patterning may also provide TFTs an opportunity to expand into new higher frequency and higher performance applications.
- 18 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (6) , 2606-2613
Analysis of the Advantages of Nanostripe-Channel Geometries for Thin-Film Transistors
We analyze the operation of thin-film transistor (TFT) devices where the active semiconductor is patterned into nanostripes (NSs). It is shown that using relatively large separations between stripes can improve current drive capability by more than a factor of 13 for many of the important material families of disordered and solution-processable TFTs. When comparing NS TFTs to unpatterned TFTs under the same operating conditions, NS devices show enhancements in peak carrier density and conductivity along the edges of the stripe. In addition to increasing the drive current, these carrier density enhancements are large enough to potentially lower the contact resistance. Short-channel effects are also greatly reduced, allowing the possibility of scaling down channel lengths for improved operation at high frequencies. This architecture will work especially well for TFT materials in which the mobility increases with carrier density, a common feature in many organic, polymer, and amorphous metal oxide semiconductors. The results of our analysis on NS TFTs not only make TFTs considerably more attractive for existing optoelectronic applications but NS patterning may also provide TFTs an opportunity to expand into new higher frequency and higher performance applications.