Heng Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heng Zhang has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
Qi Zhen
21 shared publicationsQian Zhai
15 shared publicationsKe Zhao
10 shared publicationsXiaoyu Guan
School of Materials Designing and Engineering Beijing Institute of Fashion Technology Beijing Beijing China
10 shared publicationsZiqiang Yang
9 shared publications- Xiaoyu Guan
School of Materials Designing and Engineering, Beijing Institute of Fashion Technology, Beijing, China
8 shared publications
Latest Publications
- 14 July 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (38)
Polymer‐Based Shape Memory Composites for Adaptive Textiles: From Molecular Switching to Garment‐Level Functions
Shape memory polymers (SMPs) and their composites offer a promising route for transforming textiles from passive materials into adaptive, programmable, and responsive systems. For smart clothing, their importance lies not simply in macroscopic shape recovery, but in using molecular switching to regulate textile interfaces and transport pathways. This review provides a textile‐oriented perspective on polymer‐based shape memory composites, focusing on how programmable polymer networks are translated into fibers, yarns, membranes, fabrics, coatings, Janus interfaces, and garment‐level functions. Recent advances in segmented polyurethanes, semicrystalline switching systems, elastomeric networks, biobased polymers, porous structures, conductive nanocomposites, and textile‐reinforced composites are discussed in relation to processability and wearable relevance. Representative applications include adaptive thermal–moisture management, responsive wettability, shape‐changing textiles, sensing, compression therapy, medical devices, protection, and sustainable smart garments. Beyond shape fixity and recovery ratios, this review emphasizes recovery stress, response speed, safe activation, breathability, comfort, laundering durability, textile manufacturability, and garment‐level validation. The major challenge is to connect polymer‐level shape memory with measurable improvements in comfort, protection, therapy, sensing, actuation, fit, and sustainability under realistic wearing conditions. Future SMP smart textiles should evolve from proof‐of‐concept samples toward body‐safe, washable, scalable, circular, and human‐centered adaptive clothing systems.
- 14 July 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (38)
Polymer‐Based Shape Memory Composites for Adaptive Textiles: From Molecular Switching to Garment‐Level Functions
Shape memory polymers (SMPs) and their composites offer a promising route for transforming textiles from passive materials into adaptive, programmable, and responsive systems. For smart clothing, their importance lies not simply in macroscopic shape recovery, but in using molecular switching to regulate textile interfaces and transport pathways. This review provides a textile‐oriented perspective on polymer‐based shape memory composites, focusing on how programmable polymer networks are translated into fibers, yarns, membranes, fabrics, coatings, Janus interfaces, and garment‐level functions. Recent advances in segmented polyurethanes, semicrystalline switching systems, elastomeric networks, biobased polymers, porous structures, conductive nanocomposites, and textile‐reinforced composites are discussed in relation to processability and wearable relevance. Representative applications include adaptive thermal–moisture management, responsive wettability, shape‐changing textiles, sensing, compression therapy, medical devices, protection, and sustainable smart garments. Beyond shape fixity and recovery ratios, this review emphasizes recovery stress, response speed, safe activation, breathability, comfort, laundering durability, textile manufacturability, and garment‐level validation. The major challenge is to connect polymer‐level shape memory with measurable improvements in comfort, protection, therapy, sensing, actuation, fit, and sustainability under realistic wearing conditions. Future SMP smart textiles should evolve from proof‐of‐concept samples toward body‐safe, washable, scalable, circular, and human‐centered adaptive clothing systems.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (40) , 27201-27213
Green, pliable Janus fabrics with efficient liquid management via a needle punching, hydroentangling and wetting gradient
Janus fabrics with asymmetric wettability enable guiding liquid unidirectional transport and rapid drying, showing great potential in sportswear and functional wearable textiles. However, most reported Janus fabrics suffer from insufficient flexibility and low mechanical strength. Herein, we propose a green and scalable strategy to fabricate pliable Janus fabrics by integrating a wetting-gradient design with a combined needle punching–hydroentangling process. An elastic polyolefin elastomer/polypropylene (POE/PP) filament web was integrated with a hydrophilic Lyocell fibrous web via needle punching, which drove the through-thickness embedding of Lyocell fibers to form directional water-transfer channels, followed by hydroentangling to enhance fiber entanglement and structural uniformity—all achieved without chemical modification. The resulting Janus fabrics combined enhanced mechanical strength (tensile breaking strength up to 104.6 N in the machine direction), durable elasticity (elastic recovery rate around 60% with max stress 78.6 N in the machine direction at 100% fixed strain), and favorable softness (softness score 0.200 and softness force 0.16 N in the cross-direction). The relative accumulative one-way transport capacity (AOTC) increased to 1652.1%, accompanied by an improved drying rate of 1.62 mL h−1. Moreover, the fabrics maintained excellent structural integrity and moisture management performance after 20 washing cycles. This work presents a green and scalable strategy for producing elastic Janus fabrics that integrate efficient liquid management with durable comfort, highlighting their potential for advanced quick-drying apparel and next-generation smart textiles.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (40) , 27201-27213
Green, pliable Janus fabrics with efficient liquid management via a needle punching, hydroentangling and wetting gradient
Janus fabrics with asymmetric wettability enable guiding liquid unidirectional transport and rapid drying, showing great potential in sportswear and functional wearable textiles. However, most reported Janus fabrics suffer from insufficient flexibility and low mechanical strength. Herein, we propose a green and scalable strategy to fabricate pliable Janus fabrics by integrating a wetting-gradient design with a combined needle punching–hydroentangling process. An elastic polyolefin elastomer/polypropylene (POE/PP) filament web was integrated with a hydrophilic Lyocell fibrous web via needle punching, which drove the through-thickness embedding of Lyocell fibers to form directional water-transfer channels, followed by hydroentangling to enhance fiber entanglement and structural uniformity—all achieved without chemical modification. The resulting Janus fabrics combined enhanced mechanical strength (tensile breaking strength up to 104.6 N in the machine direction), durable elasticity (elastic recovery rate around 60% with max stress 78.6 N in the machine direction at 100% fixed strain), and favorable softness (softness score 0.200 and softness force 0.16 N in the cross-direction). The relative accumulative one-way transport capacity (AOTC) increased to 1652.1%, accompanied by an improved drying rate of 1.62 mL h−1. Moreover, the fabrics maintained excellent structural integrity and moisture management performance after 20 washing cycles. This work presents a green and scalable strategy for producing elastic Janus fabrics that integrate efficient liquid management with durable comfort, highlighting their potential for advanced quick-drying apparel and next-generation smart textiles.
- 12 February 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 300
All-weather outdoor microfibrous fabrics with radiative cooling and mechanical robustness
- 12 February 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 300
All-weather outdoor microfibrous fabrics with radiative cooling and mechanical robustness
- 6 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (2) , 4509-4520
From Microstructure to Mechanism: Joining-Form-Driven Optimization of Recovery Stress and Energy Harvesting in Nanofiber Membranes
Flexible multifunctional nanofiber membranes often consist of distinct functional components; however, the influence of interfiber microstructural integration on their coupled mechanical, thermal, and electrical performances remains poorly understood. Clarifying this structure-function relationship is essential for advancing high-performance nanofiber-based systems in wearable electronics and energy harvesting. This study systematically investigates how different nanofiber joining structures─specifically including independent alignment, side-by-side configuration, and coaxial core-shell arrangements─between shape-memory polyurethane (SMPU) and polyvinylidene fluoride (PVDF) nanofibers affect the composite membrane's actuation and sensing behavior. The coaxial configuration with an SMPU core and a PVDF shell exhibits the most effective synergy, achieving a shape-recovery rate of 98.72% and a recovery stress of 0.85 MPa, both significantly higher than those observed in the side-by-side and inverse core-shell arrangements. Under vibrational excitation at 40 Hz and 0.7 mm amplitude, the coaxial SMPU-core/PVDF-shell membrane delivers an output voltage of 98.54 mV─approximately a 170% increase over the nonintegrated parallel fiber design. Finite element simulations further confirm that the enhanced surface stress distribution under dynamic loading correlates with the observed improvements in mechanical and electrical outputs. Study establishes that rational microstructural coupling of functional nanofibers can significantly amplify device performance, offering a design paradigm for shape-conformal, self-powered sensing systems.
- 6 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (2) , 4509-4520
From Microstructure to Mechanism: Joining-Form-Driven Optimization of Recovery Stress and Energy Harvesting in Nanofiber Membranes
Flexible multifunctional nanofiber membranes often consist of distinct functional components; however, the influence of interfiber microstructural integration on their coupled mechanical, thermal, and electrical performances remains poorly understood. Clarifying this structure-function relationship is essential for advancing high-performance nanofiber-based systems in wearable electronics and energy harvesting. This study systematically investigates how different nanofiber joining structures─specifically including independent alignment, side-by-side configuration, and coaxial core-shell arrangements─between shape-memory polyurethane (SMPU) and polyvinylidene fluoride (PVDF) nanofibers affect the composite membrane's actuation and sensing behavior. The coaxial configuration with an SMPU core and a PVDF shell exhibits the most effective synergy, achieving a shape-recovery rate of 98.72% and a recovery stress of 0.85 MPa, both significantly higher than those observed in the side-by-side and inverse core-shell arrangements. Under vibrational excitation at 40 Hz and 0.7 mm amplitude, the coaxial SMPU-core/PVDF-shell membrane delivers an output voltage of 98.54 mV─approximately a 170% increase over the nonintegrated parallel fiber design. Finite element simulations further confirm that the enhanced surface stress distribution under dynamic loading correlates with the observed improvements in mechanical and electrical outputs. Study establishes that rational microstructural coupling of functional nanofibers can significantly amplify device performance, offering a design paradigm for shape-conformal, self-powered sensing systems.
- Open Access
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 34857-34870
Semiembedded HDPE/VIS Composite Membranes with Tailored Wettability and Superior Mechanical Durability for Outdoor Protective Applications
Outdoor personal protective equipment (O-PPE) is vital for health and safety during activities, such as climbing and camping. However, achieving comfort in using O-PPE is challenging owing to subpar liquid management and rigid textures. In this study, a semiembedded HDPE/VIS microfibrous membrane was developed by hydroentangling a high-density polyethylene (HDPE) microfibrous web fabricated via flash spinning with a viscose (VIS) fibrous web created through carding. This innovative structure was formed under the impact of water jets, where HDPE microfibers were embedded in the VIS fiber layer, resulting in a dense and stable composite structure. This semiembedded structure enables the rapid wettability of the VIS layer while maintaining the hydrophobicity of the HDPE layer, thereby significantly enhancing liquid management, as demonstrated by a high accumulative one-way transport index of 1036%. Additionally, the sample exhibits a high water-vapor transmission rate of 1973 g/(m2 ·24 h), and the HDPE layer effectively obstructs air. Furthermore, the membrane exhibits a promising daytime radiative cooling property, thus resulting in a lower maximum temperature by 12.9 °C, a superior softness of 0.24 N, and uniform mechanical performance, which can be enhanced by adjusting the water-jet pressure and HDPE mass per unit area. Overall, the HDPE/VIS microfibrous membrane provides a balanced combination of protection, comfort, and durability, thereby offering a versatile solution for advanced O-PPE.
- 29 July 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (31) , 34857-34870
Open AccessSemiembedded HDPE/VIS Composite Membranes with Tailored Wettability and Superior Mechanical Durability for Outdoor Protective Applications
Outdoor personal protective equipment (O-PPE) is vital for health and safety during activities, such as climbing and camping. However, achieving comfort in using O-PPE is challenging owing to subpar liquid management and rigid textures. In this study, a semiembedded HDPE/VIS microfibrous membrane was developed by hydroentangling a high-density polyethylene (HDPE) microfibrous web fabricated via flash spinning with a viscose (VIS) fibrous web created through carding. This innovative structure was formed under the impact of water jets, where HDPE microfibers were embedded in the VIS fiber layer, resulting in a dense and stable composite structure. This semiembedded structure enables the rapid wettability of the VIS layer while maintaining the hydrophobicity of the HDPE layer, thereby significantly enhancing liquid management, as demonstrated by a high accumulative one-way transport index of 1036%. Additionally, the sample exhibits a high water-vapor transmission rate of 1973 g/(m2 ·24 h), and the HDPE layer effectively obstructs air. Furthermore, the membrane exhibits a promising daytime radiative cooling property, thus resulting in a lower maximum temperature by 12.9 °C, a superior softness of 0.24 N, and uniform mechanical performance, which can be enhanced by adjusting the water-jet pressure and HDPE mass per unit area. Overall, the HDPE/VIS microfibrous membrane provides a balanced combination of protection, comfort, and durability, thereby offering a versatile solution for advanced O-PPE.
- 1 July 2025
- Published by SAGE Publications in Textile Research Journal
Comprehensive study on comfort of ecofriendly cellulose diacetate fiber blend fabric
Cellulose diacetate fiber, derived from renewable wood and recycled cellulose, is valued in textiles for its sustainability yet remains underexplored regarding comfort properties. This study systematically investigates the thermal–wet and contact comfort of diacetate blend fabrics with cotton, polyester, and wool using both subjective and objective assessments. Results show that fabrics containing higher diacetate content exhibit up to a 730.98% increase in air permeability and a 98.03% rise in capillary wicking height compared with 100% cotton controls. In polyester–diacetate blends, stiffness is reduced by 27.02% and electrostatic half-life by 98.12%, highlighting improvements in softness and antistatic performance. By applying grey system theory and the entropy-weighted TOPSIS method, the optimal overall comfort is achieved at a 68% diacetate and 32% cotton ratio. This composition outperforms other blends across key indicators, such as moisture absorption, quick-dry capability, and skin-friendliness, offering a strong scientific reference for the design of comfortable, sustainable textile products. These findings underscore the synergy between diacetate and other fibers in enhancing garment comfort and advancing environmentally conscious textile manufacturing.
- 1 July 2025
- Published by SAGE Publications in Textile Research Journal
Comprehensive study on comfort of ecofriendly cellulose diacetate fiber blend fabric
Cellulose diacetate fiber, derived from renewable wood and recycled cellulose, is valued in textiles for its sustainability yet remains underexplored regarding comfort properties. This study systematically investigates the thermal–wet and contact comfort of diacetate blend fabrics with cotton, polyester, and wool using both subjective and objective assessments. Results show that fabrics containing higher diacetate content exhibit up to a 730.98% increase in air permeability and a 98.03% rise in capillary wicking height compared with 100% cotton controls. In polyester–diacetate blends, stiffness is reduced by 27.02% and electrostatic half-life by 98.12%, highlighting improvements in softness and antistatic performance. By applying grey system theory and the entropy-weighted TOPSIS method, the optimal overall comfort is achieved at a 68% diacetate and 32% cotton ratio. This composition outperforms other blends across key indicators, such as moisture absorption, quick-dry capability, and skin-friendliness, offering a strong scientific reference for the design of comfortable, sustainable textile products. These findings underscore the synergy between diacetate and other fibers in enhancing garment comfort and advancing environmentally conscious textile manufacturing.
- 27 June 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (9) , 4546-4557
Coaxial Electrospun SMPU @ PEG Composites for Enhanced Thermal Regulation on Curved Surfaces
Phase change materials (PCMs) hold promise for advanced thermal management, yet their rigid behavior often restricts effective contact with curved or irregular surfaces—leading to inefficient heat transfer. To address this gap, we report a coaxially electrospun fiber composite integrating shape memory polyurethane (SMPU) and polyethylene glycol (PEG). The rationale behind this study lies in the need to overcome air gaps that arise when conventional PCMs fail to conform to nonplanar substrates, compromising the latent heat exchange crucial for thermoregulation. Leveraging coaxial electrospinning, we tuned fiber alignment and PEG content to fabricate composites capable of both shape fixation and phase‐change–assisted temperature control. Mechanical and shape memory tests confirmed performance, with final shape fixation and recovery rates exceeding 80% and 90%, respectively. Crucially, pre‐deforming the SMPU@PEG membrane to match complex substrates reduced interfacial air layers and increased the temperature difference by up to 6.77°C and 3.67°C compared with a non‐pre‐deformed sample. This improved thermal regulation underscores the synergistic advantage of shape memory functionality and phase‐change latent heat in optimizing conformal contact and heat transfer. Our study both enhances comprehension of merging shape memory features with PCMs and has real‐world uses for wearable tech reliant on efficient curved—surface thermoregulation.
- 27 June 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (9) , 4546-4557
Coaxial Electrospun SMPU @ PEG Composites for Enhanced Thermal Regulation on Curved Surfaces
Phase change materials (PCMs) hold promise for advanced thermal management, yet their rigid behavior often restricts effective contact with curved or irregular surfaces—leading to inefficient heat transfer. To address this gap, we report a coaxially electrospun fiber composite integrating shape memory polyurethane (SMPU) and polyethylene glycol (PEG). The rationale behind this study lies in the need to overcome air gaps that arise when conventional PCMs fail to conform to nonplanar substrates, compromising the latent heat exchange crucial for thermoregulation. Leveraging coaxial electrospinning, we tuned fiber alignment and PEG content to fabricate composites capable of both shape fixation and phase‐change–assisted temperature control. Mechanical and shape memory tests confirmed performance, with final shape fixation and recovery rates exceeding 80% and 90%, respectively. Crucially, pre‐deforming the SMPU@PEG membrane to match complex substrates reduced interfacial air layers and increased the temperature difference by up to 6.77°C and 3.67°C compared with a non‐pre‐deformed sample. This improved thermal regulation underscores the synergistic advantage of shape memory functionality and phase‐change latent heat in optimizing conformal contact and heat transfer. Our study both enhances comprehension of merging shape memory features with PCMs and has real‐world uses for wearable tech reliant on efficient curved—surface thermoregulation.