Chao Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao Tang has a total of 127 co-authors. Here are the top co-authors by number of shared publications:
- Jin Li
Hunan Key Laboratory of Micro-Nano Energy Materials and Devices, Xiangtan University, Hunan 411105, People's Republic of China
46 shared publications - Tao Ouyang
Xiangtan University
45 shared publications - Chaoyu He
School of Physics and Optoelectronics, Xiangtan University, Xiangtan 411105, China
38 shared publications Jianxin Zhong
Institute for Quantum Science and Technology (IQST) and Department of Physics, Shanghai University, Shanghai, People’s Republic of China
35 shared publications- Chunxiao Zhang
School of Physics and Optoelectronic Engineering, Shandong University of Technology 1 , Zibo, Shandong 255000
22 shared publications Chaoyu He
Hunan Provincial Key Laboratory for Condensed Matter Computational Science and Materials Quantum Engineering, School of Physics and Optoelectronics, Xiangtan University, Hunan, People’s Republic of China
21 shared publications
Latest Publications
- 14 November 2026
- Published by Springer Nature in Journal of Electronic Materials
- p. 1-9
Tunable Spin Transport and Photogalvanic Properties of Two-Dimensional VSe2 via Bending Strain
- 14 November 2026
- Published by Springer Nature in Journal of Electronic Materials
- p. 1-9
Tunable Spin Transport and Photogalvanic Properties of Two-Dimensional VSe2 via Bending Strain
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Polarization-dependent thermal transport in 2D multiferroic InCrX3 (X = S, Se)
Regulating the intrinsic thermal transport properties of conventional monolayer ferroelectric materials by flipping the polarization orientation is a key scientific challenge due to their adherence to Neumann's principle. Introducing Cr atoms into monolayer In2X3 (X = S, Se) forms stable multiferroic InCrX3 structures. Moreover, the introduction of Cr atoms enables a drastic reconstruction of the local coordination environment upon polarization reversal, thereby potentially altering the phonon dispersion and scattering phase space in a manner that is not constrained by the higher symmetry of the pristine lattice. First-principles calculations reveal that the polarization orientation could affect the phonon thermal transport properties of InCrX3 significantly. For the polarization-up state, the coupling between acoustic and optical phonon branches becomes more pronounced in InCrX3, enhancing phonon anharmonicity in the low-frequency region. Meanwhile, numerous phonon quasi-flat bands appear in InCrX3 with polarization-up state as well, which give rise to lower group velocity and broaden anharmonic scattering channels. Therefore, the lattice thermal conductivity of InCrX3 in the polarization-up state is one order of magnitude lower than that in the polarization-down state. Given the semimetallic characteristics of the polarization-up state, the electronic thermal conductivity is further calculated. After incorporating electronic thermal conductivity, the total thermal conductivity still exhibits observable variation between the two polarization states. These findings uncover an electric-field-controllable heat transfer mechanism and provide a promising strategy for designing smart thermal management devices based on extreme two-dimensional monolayer multiferroic materials.
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Polarization-dependent thermal transport in 2D multiferroic InCrX3 (X = S, Se)
Regulating the intrinsic thermal transport properties of conventional monolayer ferroelectric materials by flipping the polarization orientation is a key scientific challenge due to their adherence to Neumann's principle. Introducing Cr atoms into monolayer In2X3 (X = S, Se) forms stable multiferroic InCrX3 structures. Moreover, the introduction of Cr atoms enables a drastic reconstruction of the local coordination environment upon polarization reversal, thereby potentially altering the phonon dispersion and scattering phase space in a manner that is not constrained by the higher symmetry of the pristine lattice. First-principles calculations reveal that the polarization orientation could affect the phonon thermal transport properties of InCrX3 significantly. For the polarization-up state, the coupling between acoustic and optical phonon branches becomes more pronounced in InCrX3, enhancing phonon anharmonicity in the low-frequency region. Meanwhile, numerous phonon quasi-flat bands appear in InCrX3 with polarization-up state as well, which give rise to lower group velocity and broaden anharmonic scattering channels. Therefore, the lattice thermal conductivity of InCrX3 in the polarization-up state is one order of magnitude lower than that in the polarization-down state. Given the semimetallic characteristics of the polarization-up state, the electronic thermal conductivity is further calculated. After incorporating electronic thermal conductivity, the total thermal conductivity still exhibits observable variation between the two polarization states. These findings uncover an electric-field-controllable heat transfer mechanism and provide a promising strategy for designing smart thermal management devices based on extreme two-dimensional monolayer multiferroic materials.
- 11 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (10)
Mirror-symmetry-protected Dirac nodal lines and rings in two-dimensional P2/m-B11 borophene
The exploration of stable two-dimensional Dirac nodal-line materials is essential for understanding and realizing low-dimensional topological quantum states. Here, using first-principles calculations and symmetry analysis, we predict a novel borophene allotrope, P2/m-B11, and systematically investigate its structural stability and electronic properties. Phonon calculations and ab initio molecular dynamics simulations confirm its excellent dynamical and thermal stability. Remarkably, P2/m-B11 borophene hosts two Dirac nodal lines and two Dirac nodal rings in the vicinity of the Fermi level, arising from linear Dirac band crossings. The corresponding Fermi velocities are comparable to those of graphene, implying potentially high carrier mobility. Symmetry analysis reveals that these nodal features are protected by mirror symmetry. Owing to the weak intrinsic spin–orbit interaction of boron, they remain nearly intact in the presence of spin–orbit coupling. These findings establish P2/m-B11 borophene as a promising two-dimensional nodal-line semimetal and provide a viable borophene platform for exploring topological quantum phenomena and next-generation electronic devices.
- 11 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (10)
Mirror-symmetry-protected Dirac nodal lines and rings in two-dimensional P2/m-B11 borophene
The exploration of stable two-dimensional Dirac nodal-line materials is essential for understanding and realizing low-dimensional topological quantum states. Here, using first-principles calculations and symmetry analysis, we predict a novel borophene allotrope, P2/m-B11, and systematically investigate its structural stability and electronic properties. Phonon calculations and ab initio molecular dynamics simulations confirm its excellent dynamical and thermal stability. Remarkably, P2/m-B11 borophene hosts two Dirac nodal lines and two Dirac nodal rings in the vicinity of the Fermi level, arising from linear Dirac band crossings. The corresponding Fermi velocities are comparable to those of graphene, implying potentially high carrier mobility. Symmetry analysis reveals that these nodal features are protected by mirror symmetry. Owing to the weak intrinsic spin–orbit interaction of boron, they remain nearly intact in the presence of spin–orbit coupling. These findings establish P2/m-B11 borophene as a promising two-dimensional nodal-line semimetal and provide a viable borophene platform for exploring topological quantum phenomena and next-generation electronic devices.
- 1 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
Higher-order anharmonic phonon transport enhanced by flatbands in Pd3S2Cl2 with intrinsic kagome lattice
An efficient computational framework combining machine-learning moment tensor potentials with the phonon Boltzmann transport equation is developed to systematically investigate the anomalous lattice dynamics and thermal transport properties of the geometrically frustrated kagome material Pd3S2Cl2. The results reveal that the geometric constraints inherent to the kagome lattice generate pronounced flat phonon bands over a wide frequency range. These flat-band modes exhibit nearly zero group velocities and therefore make negligible direct contributions to lattice thermal transport. Instead, the low thermal conductivity of Pd3S2Cl2 originates from the synergistic effects of reduced phonon group velocities and enhanced anharmonic scattering. Further analysis demonstrates that the nearly dispersionless phonon bands induce pronounced Van Hove singularities in the phonon density of states, leading to a high density of nearly degenerate phonon states. This characteristic substantially increases the number of phonon combinations satisfying the energy- and momentum-conservation requirements for four-phonon processes, thereby enlarging the available four-phonon scattering phase space. The enhanced four-phonon scattering mainly reduces the lifetimes of heat-carrying dispersive phonons, providing an additional mechanism for suppressing lattice thermal conductivity beyond the intrinsic limitation of phonon group velocities. Consequently, thermal conductivities predicted by considering only three-phonon scattering are significantly overestimated due to the omission of strong four-phonon interactions. Our calculations demonstrate that incorporating four-phonon scattering is essential for accurately describing thermal transport in this frustrated system, with the thermal conductivity reduction reaching 76.6% for the γ phase at room temperature. These findings establish a microscopic connection between geometric frustration, flat-band-induced anharmonic scattering, and ultra-low lattice thermal conductivity, providing new insights into phonon transport in frustrated materials and offering guidance for designing ultralow-thermal-conductivity materials through flat-band engineering.
- 1 September 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (9)
Higher-order anharmonic phonon transport enhanced by flatbands in Pd3S2Cl2 with intrinsic kagome lattice
An efficient computational framework combining machine-learning moment tensor potentials with the phonon Boltzmann transport equation is developed to systematically investigate the anomalous lattice dynamics and thermal transport properties of the geometrically frustrated kagome material Pd3S2Cl2. The results reveal that the geometric constraints inherent to the kagome lattice generate pronounced flat phonon bands over a wide frequency range. These flat-band modes exhibit nearly zero group velocities and therefore make negligible direct contributions to lattice thermal transport. Instead, the low thermal conductivity of Pd3S2Cl2 originates from the synergistic effects of reduced phonon group velocities and enhanced anharmonic scattering. Further analysis demonstrates that the nearly dispersionless phonon bands induce pronounced Van Hove singularities in the phonon density of states, leading to a high density of nearly degenerate phonon states. This characteristic substantially increases the number of phonon combinations satisfying the energy- and momentum-conservation requirements for four-phonon processes, thereby enlarging the available four-phonon scattering phase space. The enhanced four-phonon scattering mainly reduces the lifetimes of heat-carrying dispersive phonons, providing an additional mechanism for suppressing lattice thermal conductivity beyond the intrinsic limitation of phonon group velocities. Consequently, thermal conductivities predicted by considering only three-phonon scattering are significantly overestimated due to the omission of strong four-phonon interactions. Our calculations demonstrate that incorporating four-phonon scattering is essential for accurately describing thermal transport in this frustrated system, with the thermal conductivity reduction reaching 76.6% for the γ phase at room temperature. These findings establish a microscopic connection between geometric frustration, flat-band-induced anharmonic scattering, and ultra-low lattice thermal conductivity, providing new insights into phonon transport in frustrated materials and offering guidance for designing ultralow-thermal-conductivity materials through flat-band engineering.
- 14 May 2026
- Published by IOP Publishing in Chinese Physics Letters
- Vol. 43 (6)
Ultrahigh Lattice Thermal Conductivity in 2D Magnetic VSi 2 N 4 Driven by Exceptional Stiffness
Two-dimensional (2D) magnetic semiconductors are promising candidates for next-generation spintronic, memory, and logic devices. However, their practical deployment is often hindered by poor heat dissipation due to the low lattice thermal conductivity (κ L ). Herein, we identify a 2D ferromagnetic semiconductor, VSi 2 N 4 , that exhibits an ultrahigh κ L . Using first-principles calculations combined with the MACE machine learning potential and the phonon Boltzmann transport equation, we reveal that the room-temperature κ L of VSi 2 N 4 is about 317 Wm -1 K -1 . This value is one order of magnitude higher than that of most known 2D magnets and represents the highest κ L reported in these materials. This superior thermal transport mainly originates from the large phonon group velocity and weak phonon-phonon scattering. Notably, even with the inclusion of four-phonon scattering, the κ L reduction is merely approximately 8.3%, indicating limited high-order anharmonicity. Meanwhile, our analysis further reveals that the κ L value of VSi 2 N 4 significantly deviates from the conventional scaling trends established by Slack based on the number of atoms per unit cell and the average atomic mass. Nevertheless, a clear positive correlation is established with the Young’s modulus, underscoring mechanical stiffness as an effective descriptor for superior thermal transport in 2D systems. The exceptional stiffness of VSi 2 N 4 is attributed to the strong bonding resulting from the highly localized charge distribution between the Si and N atoms. These findings presented in this work not only reveal VSi 2 N 4 as a unique platform integrating robust ferromagnetism with outstanding heat dissipation, but also provide crucial guidance for the thermal management of future high-performance 2D magnetic materials.
- 14 May 2026
- Published by IOP Publishing in Chinese Physics Letters
- Vol. 43 (6)
Ultrahigh Lattice Thermal Conductivity in 2D Magnetic VSi 2 N 4 Driven by Exceptional Stiffness
Two-dimensional (2D) magnetic semiconductors are promising candidates for next-generation spintronic, memory, and logic devices. However, their practical deployment is often hindered by poor heat dissipation due to the low lattice thermal conductivity (κ L ). Herein, we identify a 2D ferromagnetic semiconductor, VSi 2 N 4 , that exhibits an ultrahigh κ L . Using first-principles calculations combined with the MACE machine learning potential and the phonon Boltzmann transport equation, we reveal that the room-temperature κ L of VSi 2 N 4 is about 317 Wm -1 K -1 . This value is one order of magnitude higher than that of most known 2D magnets and represents the highest κ L reported in these materials. This superior thermal transport mainly originates from the large phonon group velocity and weak phonon-phonon scattering. Notably, even with the inclusion of four-phonon scattering, the κ L reduction is merely approximately 8.3%, indicating limited high-order anharmonicity. Meanwhile, our analysis further reveals that the κ L value of VSi 2 N 4 significantly deviates from the conventional scaling trends established by Slack based on the number of atoms per unit cell and the average atomic mass. Nevertheless, a clear positive correlation is established with the Young’s modulus, underscoring mechanical stiffness as an effective descriptor for superior thermal transport in 2D systems. The exceptional stiffness of VSi 2 N 4 is attributed to the strong bonding resulting from the highly localized charge distribution between the Si and N atoms. These findings presented in this work not only reveal VSi 2 N 4 as a unique platform integrating robust ferromagnetism with outstanding heat dissipation, but also provide crucial guidance for the thermal management of future high-performance 2D magnetic materials.
- Open Access
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Coexistence of quantum spin Hall effect and intrinsic piezoelectricity in I-doped monolayer Bi4Br4
The quantum spin Hall insulator with intrinsic piezoelectric response has attracted much attention due to its potential applications in topological electronic states and piezoelectric electric coupling fields. Motivated by the comparable chemical properties of Br and I, we construct Janus Bi4BrxI4−x (x = 1, 2, 3) monolayers by tuning the I concentration and systematically investigate their electronic, topological, and piezoelectric properties. First-principles calculations demonstrate that all three Janus structures are dynamically stable, wide-bandgap quantum spin Hall insulators, with nontrivial bandgaps of ∼0.26 eV. Density functional perturbation theory calculations confirm that non-centrosymmetric Bi4Br3I1 and Bi4Br1I3 possess significant in-plane piezoelectric effects, with Bi4Br3I1 exhibiting a notably large piezoelectric strain coefficient of |d11| = 7.092 pm/V. Notably, Bi4BrxI4−x (x = 1, 2, 3) structures have already been synthesized and their properties experimentally verified, underscoring their practical feasibility. These findings establish Janus Bi4BrxI4−x (x = 1, 2, 3) monolayers as a promising platform, enabling the coexistence of nontrivial topological states and strong piezoelectricity, paving the way for next-generation multifunctional quantum devices.
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Open AccessCoexistence of quantum spin Hall effect and intrinsic piezoelectricity in I-doped monolayer Bi4Br4
The quantum spin Hall insulator with intrinsic piezoelectric response has attracted much attention due to its potential applications in topological electronic states and piezoelectric electric coupling fields. Motivated by the comparable chemical properties of Br and I, we construct Janus Bi4BrxI4−x (x = 1, 2, 3) monolayers by tuning the I concentration and systematically investigate their electronic, topological, and piezoelectric properties. First-principles calculations demonstrate that all three Janus structures are dynamically stable, wide-bandgap quantum spin Hall insulators, with nontrivial bandgaps of ∼0.26 eV. Density functional perturbation theory calculations confirm that non-centrosymmetric Bi4Br3I1 and Bi4Br1I3 possess significant in-plane piezoelectric effects, with Bi4Br3I1 exhibiting a notably large piezoelectric strain coefficient of |d11| = 7.092 pm/V. Notably, Bi4BrxI4−x (x = 1, 2, 3) structures have already been synthesized and their properties experimentally verified, underscoring their practical feasibility. These findings establish Janus Bi4BrxI4−x (x = 1, 2, 3) monolayers as a promising platform, enabling the coexistence of nontrivial topological states and strong piezoelectricity, paving the way for next-generation multifunctional quantum devices.
- 26 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (4)
Ferroelectrically reversible PL-AHE in multiferroic heterostructures of rare-earth iodides
Layer-polarized anomalous Hall effect (LP-AHE), arising from the coupling between valley-contrasting Berry curvature and the layer degree of freedom, is a fundamental phenomenon in condensed matter physics and spintronics. In this work, using first-principles calculations, we demonstrate that the LP-AHE can be established in GdCeI4, a rare-earth iodide (RI2) multiferroic heterostructure. In GdCeI4, the layer degree of freedom enables direct coupling between ferroelectricity and valley-contrasting Berry curvature. Layer-dependent valley polarization is tunable by sliding ferroelectricity, while valley-contrasting Berry curvature is switched by altering the magnetization orientation. The LP-AHE can also be achieved and switched in GdCeBr4. In two other RI2 heterostructures, GdYI4 and GdLaI4, the sliding ferroelectricity is also achieved, but the layer polarization cannot be switched by sliding ferroelectricity. The layer-valley coupling also enables the control of LP-AHE via an applied gate voltage. Our work provides an alternative route to construct LP-AHE systems.
- 26 January 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (4)
Ferroelectrically reversible PL-AHE in multiferroic heterostructures of rare-earth iodides
Layer-polarized anomalous Hall effect (LP-AHE), arising from the coupling between valley-contrasting Berry curvature and the layer degree of freedom, is a fundamental phenomenon in condensed matter physics and spintronics. In this work, using first-principles calculations, we demonstrate that the LP-AHE can be established in GdCeI4, a rare-earth iodide (RI2) multiferroic heterostructure. In GdCeI4, the layer degree of freedom enables direct coupling between ferroelectricity and valley-contrasting Berry curvature. Layer-dependent valley polarization is tunable by sliding ferroelectricity, while valley-contrasting Berry curvature is switched by altering the magnetization orientation. The LP-AHE can also be achieved and switched in GdCeBr4. In two other RI2 heterostructures, GdYI4 and GdLaI4, the sliding ferroelectricity is also achieved, but the layer polarization cannot be switched by sliding ferroelectricity. The layer-valley coupling also enables the control of LP-AHE via an applied gate voltage. Our work provides an alternative route to construct LP-AHE systems.
- 14 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (4)
Electronic properties of twisted bilayer graphene with biaxial heterostrain
Twisted bilayer graphene (TBG), celebrated for its flat bands at the magic angle, has garnered significant attention in condensed matter physics. Interestingly, environmental differences on both sides may lead to different strain effects (heterostrain), forming periodic moiré potentials between two graphene layers with unequal numbers of atoms. Using tight-binding calculations, we systematically study the electronic properties of TBG with biaxial heterostrain. The results reveal two distinct regimes based on the Dirac valley locations: (1) Dirac valleys remain at the K point, similar to unstrained TBG, but valley separation occurs near charge neutrality due to unequal strain; (2) a twofold degenerate Dirac valley emerges at the K point, accompanied by a fourfold degenerate valley at the Γ point, and their low-energy bands near the Fermi level are hybridized. Moreover, biaxial heterostrain weakens interlayer coupling, increases the Dirac velocity, broadens the bandwidth of the subbands near the Fermi level and modulates the bandgap at the superlattice band edge. These results may provide insights into experimental observations and motivate further research into TBG.
- 14 January 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (4)
Electronic properties of twisted bilayer graphene with biaxial heterostrain
Twisted bilayer graphene (TBG), celebrated for its flat bands at the magic angle, has garnered significant attention in condensed matter physics. Interestingly, environmental differences on both sides may lead to different strain effects (heterostrain), forming periodic moiré potentials between two graphene layers with unequal numbers of atoms. Using tight-binding calculations, we systematically study the electronic properties of TBG with biaxial heterostrain. The results reveal two distinct regimes based on the Dirac valley locations: (1) Dirac valleys remain at the K point, similar to unstrained TBG, but valley separation occurs near charge neutrality due to unequal strain; (2) a twofold degenerate Dirac valley emerges at the K point, accompanied by a fourfold degenerate valley at the Γ point, and their low-energy bands near the Fermi level are hybridized. Moreover, biaxial heterostrain weakens interlayer coupling, increases the Dirac velocity, broadens the bandwidth of the subbands near the Fermi level and modulates the bandgap at the superlattice band edge. These results may provide insights into experimental observations and motivate further research into TBG.
- Open Access
- 26 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (20)
Giant ferroelectric polarization and multiferroicity of two-dimensional hydrofluorinated SiC
Two-dimensional (2D) multiferroic materials are crucial for designing next-generation functional devices. However, 2D multiferroic materials remain extremely scarce, particularly ferroelectric–ferroelastic materials. Based on the RG2 structure search algorithm and first-principles calculations, we systematically study the hydrogenated (fluorinated) monolayer SiC and find that the α-phase structures have the lowest energy and possess good stability. Interestingly, the polarization value of α-H-SiC-H is as high as 10.61 × 10−10 C/m, which is the largest polarization value discovered in 2D materials to date. It is found that due to the unique symmetry and large Poisson's ratio of α-X-SiC-X (X = H, F), under tensile (compressive) strain along the zigzag (armchair) direction, the structure can achieve a 90° lattice rotation, leading to a switch in the polarization direction, thereby realizing ferroelastic–ferroelectric multiferroicity. Moreover, its ferroelectricity can be maintained at temperatures up to 500 K. Our study not only proposes a class of highly promising 2D multiferroic materials but also demonstrates that the functionalization of 2D materials may be one of the effective methods for inducing their multiferroic properties.
- 26 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (20)
Open AccessGiant ferroelectric polarization and multiferroicity of two-dimensional hydrofluorinated SiC
Two-dimensional (2D) multiferroic materials are crucial for designing next-generation functional devices. However, 2D multiferroic materials remain extremely scarce, particularly ferroelectric–ferroelastic materials. Based on the RG2 structure search algorithm and first-principles calculations, we systematically study the hydrogenated (fluorinated) monolayer SiC and find that the α-phase structures have the lowest energy and possess good stability. Interestingly, the polarization value of α-H-SiC-H is as high as 10.61 × 10−10 C/m, which is the largest polarization value discovered in 2D materials to date. It is found that due to the unique symmetry and large Poisson's ratio of α-X-SiC-X (X = H, F), under tensile (compressive) strain along the zigzag (armchair) direction, the structure can achieve a 90° lattice rotation, leading to a switch in the polarization direction, thereby realizing ferroelastic–ferroelectric multiferroicity. Moreover, its ferroelectricity can be maintained at temperatures up to 500 K. Our study not only proposes a class of highly promising 2D multiferroic materials but also demonstrates that the functionalization of 2D materials may be one of the effective methods for inducing their multiferroic properties.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
The thermal transport properties of monolayer BiOsO3: The role of spin–orbit coupling and magnetic anisotropy
Thermal transport in magnetic materials has attracted tremendous attention due to its importance in spintronics and thermal management. However, existing calculations of thermal conductivity of magnetic materials often simplify the complex non-collinear spin structures and realistic magnetic moment orientations by assuming collinear spin structures with spins aligned along the z-axis. To evaluate the reliability of such simplification, by means of machine learning potentials (MLPs) combined with the Boltzmann transport equation (BTE), we systematically investigate the thermal transport properties of monolayer BiOsO3, a ferromagnetic semiconductor with strong spin–orbit coupling (SOC) and large magnetic anisotropy (MA). The calculations show that SOC effect could significantly enhance the lattice thermal conductivity (2.83 W/mK) by a factor of approximately 2.2 compared to the case without SOC (1.29 W/mK). This obvious enhancement mainly originates from the fact that the introduction of SOC drives charge redistribution toward the inner Os–O bond network, thereby enhancing the symmetry of internal potential wells and suppressing phonon anharmonicity. Such behavior indicates that the previous simplified collinear approaches are insufficient to accurately describe the thermal transport in magnetic materials with strong SOC. In contrast, BiOsO3 exhibits a large magnetic anisotropy energy (MAE=−5.7 meV/Os). However, the orientation of spin easy axis hosts a weak influence on the thermal conductivity. These findings shed light on the thermal conductivity of BiOsO3, and could also provide meaningful guidance for studying thermal transport in magnetic materials.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
The thermal transport properties of monolayer BiOsO3: The role of spin–orbit coupling and magnetic anisotropy
Thermal transport in magnetic materials has attracted tremendous attention due to its importance in spintronics and thermal management. However, existing calculations of thermal conductivity of magnetic materials often simplify the complex non-collinear spin structures and realistic magnetic moment orientations by assuming collinear spin structures with spins aligned along the z-axis. To evaluate the reliability of such simplification, by means of machine learning potentials (MLPs) combined with the Boltzmann transport equation (BTE), we systematically investigate the thermal transport properties of monolayer BiOsO3, a ferromagnetic semiconductor with strong spin–orbit coupling (SOC) and large magnetic anisotropy (MA). The calculations show that SOC effect could significantly enhance the lattice thermal conductivity (2.83 W/mK) by a factor of approximately 2.2 compared to the case without SOC (1.29 W/mK). This obvious enhancement mainly originates from the fact that the introduction of SOC drives charge redistribution toward the inner Os–O bond network, thereby enhancing the symmetry of internal potential wells and suppressing phonon anharmonicity. Such behavior indicates that the previous simplified collinear approaches are insufficient to accurately describe the thermal transport in magnetic materials with strong SOC. In contrast, BiOsO3 exhibits a large magnetic anisotropy energy (MAE=−5.7 meV/Os). However, the orientation of spin easy axis hosts a weak influence on the thermal conductivity. These findings shed light on the thermal conductivity of BiOsO3, and could also provide meaningful guidance for studying thermal transport in magnetic materials.