SWShengxiang Wang

Shengxiang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shengxiang Wang has a total of 195 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Chiral Quasi‐BICs Stemming From a Γ‐point Degeneracy

    by Bohan Zhang, Dongha Yang, Yuhao Wu, Mingqi Zheng, Wei Zhu, Lei Kang, Kang Du, Douglas H. Werner, Shengxiang Wang

    Band degeneracies representing symmetry properties of two‐dimensional (2D) periodic photonic structures are widely observed. In momentum space, exotic photonic phenomena have been demonstrated in the vicinity of such degeneracies, while studies on intrinsic properties of those isolated points remain limited. In this letter, we show that chiral quasi‐bound states in the continuum (quasi‐BICs) can be achieved through a Γ‐point degeneracy in resonant metasurfaces with C 4 symmetry. We demonstrate that, depending on their enantiomeric property, three‐dimensional (3D) chiral perturbations enable a ±π/2 phase difference between two degenerate and orthogonally orientated linear polarizations, resulting in the strong chiral selectivity at the Γ point. The proposed chiral quasi‐BIC is experimentally observed in a 3D‐printed dielectric metasurface. Our results reveal the potential of high‐symmetry degeneracy points as a means for empowering sophisticated light‐matter coupling.

  • Open Access

    Hierarchical Physical‐Cyber Encryption via Metasurface‐Encoded Holographic Keys

    by Zhen Liu, Changhong Dai, Wei Zhu, Ruisheng Yang, Bohan Zhang, Lei Zhang, Bobo Du, Shengxiang Wang, Guangwei Hu

    Physical‐layer encryption based on metasurfaces has emerged as a promising alternative to conventional algorithmic cryptography by embedding security into physical processes. However, most existing metasurface‐based encryption schemes operate within single‐stage or static frameworks, where correct physical illumination directly reveals the hidden information, leaving them vulnerable once the physical key is exposed. Here, we propose a hierarchical physical‐cyber cryptographic framework that synergistically integrates meta‐hologram with dynamic digital protocols to overcome these limitations. The system employs a polarization‐multiplexed metasurface to generate two independent holographic keys through spin‐decoupling wavefront control, establishing a three‐stage cyber‐decryption protocol to combine hardware‐level unclonability with digital algorithmic security. To address the intrinsic noise of physical channels, a robust extraction interface based on amplitude thresholding and grid statistics is further introduced, bridging physical outputs with digital logic and enabling reliable recovery of structured keys from holographic reconstructions under practical interference conditions. Experimental validation in the microwave band confirms stable decryption performance with strong noise resilience, successfully recovering concealed information through sequential physical reconstruction and cryptographic processing. Owing to its inherent frequency‐band universality, the proposed scheme is readily extendable to terahertz and optical frequencies, offering a scalable paradigm for multi‐band secure communication systems. By embedding cryptographic strength in physically unclonable processes, this work not only provides a versatile and intrusion‐resistant framework for next‐generation information protection.


  • Topological rainbow trapping and defect modes in shifted interface channels

    by Xinyi Xia, Xiaoming Zhang, Wei Zhu, Weijia Han, Bohan Zhang, Kang Du, Guochao Wei, Shengxiang Wang

    Topological photonics offers a robust platform for manipulating light with minimal backscattering. Among these systems, valley photonic crystals are particularly notable for their valley-dependent edge states, whose dispersions can be engineered not only through bulk topology but also via the geometric configuration of the interface. In this work, we show that introducing transitional deformations in the valley channels enables precise control over the frequency ranges of the valley edge states. Building on this, we construct a valley channel composed of valley sections with gradually varying translational deformations, giving rise to topologically protected ‘rainbow trapping,’ where different frequency components of incident waves are spatially localized along the interface. Furthermore, by joining interface domains with opposite structural deformations, topological defect modes can be realized. Both the rainbow trapping and defect mode are demonstrated robust against structural perturbations. These findings open an alternative way for robust on-chip signal buffering, high-Q filtering, and enhanced light–matter interactions in integrated photonic circuits.

  • Open Access

    Machine-learning-guided discovery of Ca 3 SnSi 2 O 9 -based ceramics with ultrahigh Q×f values for topological metasurface filters

    by Kang Du, Yunkang Ge, Beibei Wang, Yuan Wang, Chengyun Li, Anping Lv, Yan Liu, Ying Yang, Weijia Han, Guochao Wei, et al.

    Microwave dielectric ceramics have emerged as highly promising materials for high-frequency applications due to their exceptional dielectric properties. Nevertheless, achieving an optimal balance among the interdependent parameters of relative permittivity (εr), quality factor (Q×f), and temperature coefficient of resonant frequency (τf) to satisfy the technical requirements of microwave components continues to pose a substantial challenge. In this work, an interpretable machine learning framework was proposed to elucidate the structure–property relationships, thereby guiding the compositional design of the candidate microwave ceramic Ca3SnSi2O9. Based on the machine learning insights, we developed a Ca3Sn1-xGexSi2O9 (0.025 ≤ x ≤ 0.20) ceramic system where controlled Ge4+ substitution for Sn4+ was strategically designed to synergistically optimize both Q×f and τf values while maintaining low εr. This improvement was achieved through the enhanced relative covalency of Sn-O and Si-O bonds, along with intensified octahedral distortion and polyhedral chain angles in the single-phase Ca3Sn1-xGexSi2O9 ceramics. Remarkably, the Ca3Sn1-xGexSi2O9 (x = 0.05) ceramic demonstrated outstanding performance, exhibiting an ultra-high Q×f value of 120,413 GHz coupled with a favorably small negative τf value of ‒25.8 ppm/°C. These results clearly demonstrate that the collaborative optimization strategy can significantly enhance the microwave dielectric properties of Ca3SnSi2O9-based ceramics. Furthermore, a single-mode topological metasurface filter operating in the X-band was designed and fabricated using the ultra-low dielectric loss Ca3Sn1-xGexSi2O9 (x = 0.05) ceramic. Leveraging the bulk-edge correspondence, we established a relationship between structural morphology with transitional deformations and operating frequency. Experimental results demonstrated that the topological metasurface filter can operate at any frequency within the range of 9.6 GHz to 10.3 GHz. This advancement extends the potential applications of Ca3SnSi2O9-based ceramics to the metasurface filters for high-frequency communication systems.

  • Temperature-Decoupled Multimodal Surface Acoustic Wave Strain Sensors Using Z-Cut Lithium Niobate on Insulator Substrate

    by Yuanhang Qu, Zhiwei Wen, Yan Liu, Shengxiang Wang, Xiang Chen, Jiaqi Ding, Xiyu Gu, Yao Cai, Guoqiang Wu, Chengliang Sun

    Surface acoustic wave (SAW) strain sensors have attracted widespread attention in recent years due to their wireless, passive operation and excellent stability in complex environments. In this work, a multimodal SAW strain sensor based on Z-cut lithium niobate on insulator (LNOI) substrate is proposed and fabricated. Five distinct acoustic modes are identified, each exhibiting significantly different responses to strain and temperature. Among them, the 0th-order antisymmetric Rayleigh mode shows the highest positive strain sensitivity (92 Hz/ $\mu \varepsilon $ ), while the 1st-order symmetric Rayleigh mode exhibits a negative strain sensitivity (−64 Hz/ $\mu \varepsilon $ ). To eliminate the interference of temperature in strain measurements, an effective decoupling method is proposed based on the sensitivity differences of these two modes, using a frequency response sensitivity matrix to achieve the separation of temperature and strain signals. Experimental results demonstrate excellent decoupling performance, with root-mean-square errors of $0.13~^{\circ }$ C for temperature and $15.88~\mu \varepsilon $ for strain. These findings confirm the great potential of the proposed sensor for high-performance, wireless, and multiparameter sensing applications.

  • Boosting Performance ε -Ga 2 O 3 SAW Resonators With Mo Interlayer: Optimized Electric Field and Enhanced FOM

    by Jiaqi Ding, Yao Cai, Yan Liu, Zhucheng Li, Li Zhang, Yuanhang Qu, Xiaoming Huang, Xiang Chen, Shengxiang Wang, Xiaodong Zhang, et al.

    This letter reports a high-performance surface acoustic wave (SAW) resonator that incorporates a Mo interlayer between sapphire substrate and $\varepsilon $ -Ga2O3 (002). In this design, a Mo metal layer is used as the bottom electrode, followed by the deposition of an epitaxial $\varepsilon $ -Ga2O3 piezoelectric film via metal-organic chemical vapor deposition (MOCVD) and subsequent etching to expose the bottom electrode. Devices with the grounded Mo electrode achieve a figure of merit (FOM = effective electromechanical coupling coefficient $k^{2}_{\mathrm {eff}} \times $ quality factor $Q$ ) enhanced by more than 60 times (from a maximum of 3.11 to 196) compared to conventional configurations. Finite element simulations indicate that the grounding bottom electrode optimizes the electric field distribution and prevents electric field leakage into the sapphire substrate, thereby boosting the FOM of the $\varepsilon $ -Ga2O3-based SAW resonator. The proposed novel $\varepsilon $ -Ga2O3 SAW resonator structure significantly improves device performance and greatly enhances its potential for sensor applications.


  • Theoretical analysis and experiment of cantilever-based surface acoustic wave flowmeter

    by Zesheng Liu, Yan Liu, Xiyu Gu, Shengxiang Wang, Xiaoming Huang, Wei Min, Xin Tong, Yuanhang Qu, Haiyang Li, Yao Cai, et al.

    Flowmeters are widely used across various industries to measure fluid flow rates. However, traditional designs face limitations related to wiring complexity and external power requirements, especially in harsh environments. Surface Acoustic Wave (SAW) technology offers a compelling alternative, enabling wireless sensing under such conditions. This study represents the theoretical and experiment evaluation of a cantilever-based SAW flowmeter. As the flow passes over the cantilever, the pressure across it induces bending which in turn causes a shift on the resonant frequency of the SAW. By monitoring this frequency shift under varying flow rates, flow rate calibration can be achieved. This frequency shift originates from the stress applied on SAW, which alters the boundary condition of constitutive piezoelectric equations, material properties, and the wavelength of SAW. A theoretical analysis of SAW frequency shift was performed using COMSOL and Material Studio, focusing on the combined effects of stress, material property variations, and wavelength change. Experimental validation shows that the cantilever-based SAW flowmeter exhibits an average frequency shift of 703.67 (Hz/(L/min)) for N 2 gas.

  • Open Access

    In situ constructed chromate cover stabilizes seawater oxidation via competitively repelling chloride ions

    by Tingting Wang, Xiaoyu Wei, Zhonghan Cheng, Xingchuan Li, Kejun Liu, Lei Ming, Longyang Zhang, Jiahui Lyu, Kunming Pan, Zihan Li, et al.

    The electrolysis of natural seawater powered by abundant offshore renewable energy is widely considered as a sustainable hydrogen production technique. However, the competitive chlorine evolution reaction severely damages the catalyst durability in the anodic seawater oxidation. Here, we demonstrate that the in situ chromate cover restructured from a preformed Cr-based metal organic framework (MIL-101(Cr)) stabilizes anodic seawater oxidation while maintaining high activity on an optimized NiFe-layered double hydroxide (NiFe-LDH) array catalyst. Impressively, such a cover enables an over 20-fold reduction in overpotential attenuation rate (0.11 mV h-1) in comparison to the unmodified NiFe-LDH counterpart (2.38 mV h-1) against a stable 185 hours operation. A combination of experiment studies and theoretical calculations has unveiled that the in situ generated chromate cover weaken unfavorable Cl- adsorption more notably over reactive OH-, therefore mitigating the Cl-related corrosion on the NiFe-LDH. The present study advances a stability breakthrough in the feasible implementation of direct seawater electrolysis for sustainable green hydrogen production.


  • An H-Shaped Piezoelectric MEMS Dual-Axis Accelerometer

    by Lei Liu, Zesheng Liu, Chengxiao Mo, Xiaoming Huang, Min Wei, Yuanhang Qu, Xiyu Gu, Yan Liu, Shengxiang Wang, Chengliang Sun

    This paper focuses on the study of a piezoelectric dual-axis accelerometer using AlN/ScAlN double-layer piezoelectric films. The proposed accelerometer adopts SOI wafer as the substrate and constructs the AlN/ScAlN/Mo stack as the sensing layer. Through the establishment of theoretical model and finite element simulation, the relationship between the deformation of the structure and the output voltage of the port was analyzed and obtained. The first-order resonant frequencies of the designed accelerometer in the X and Y directions are 157.48 kHz and 83.28 kHz respectively. In addition, the experimental test results indicate that under the acceleration excitation at 500 Hz, the voltage sensitivities of the accelerometer in the X and Y directions are 1.19 mV/g and 1.81 mV/g respectively, and the minimum detectable signals in the X and Y directions are 7 mg and 6 mg respectively. The manufactured accelerometer has good linearity (0.9984) within the acceleration range of 0.2-2.4 g. The innovative structure proposed in this paper provides a new design idea for the research of piezoelectric accelerometers and is expected to promote the further development of this field.


  • Open Access

    Achieving ultra-low thermal expansion and excellent microwave dielectric properties in osumilite-type BaMg 2Al 6Si 9− x Ge x O 30 ceramics

    by Chengyun Li, Kang Du, Mengdie Zhou, Yunkang Ge, Yuan Wang, Guochao Wei, Weijia Han, Wei Zhu, Xinying Liu, Zixiong Sun, et al.

    Excellent microwave dielectric properties and ultra-low thermal expansion are essential for dielectric ceramics in high-frequency substrate applications. However, the inherent constrains among these three key microwave dielectric properties make it challenging to simultaneously achieve ultra-low εr, high Q×f, and near-zero τf values in existing materials. Particularly, the coefficient of thermal expansion of microwave dielectric ceramics often exhibits values around 10 ppm/°C, offering limited tunability. In this work, based on a novel osumilite-type BaMg2Al6Si9O30 ceramic with high crystal structural symmetry and excellent stability, we designed a strategy involving the substitution of Si4+ with larger Ge4+ ions. Replacing Si4+ with larger Ge4+ ions directly elongated the Si/Al(1)-O bond length while reducing the Si/Al(1)-O(1)-Si/Al(1) angle (σ₂). This structural modification suppressed the longitudinal vibration of 2-coordinate O(1) along the a-axis, effectively inhibiting negative thermal expansion and yielding a reduced CTE within the operational temperature range. Simultaneously, the elongation of the Si/Al(1)-O bond cooperatively increased the Si/Al(1)-O(2)-Si/Al(1) angle (σ₁) and enhanced the relative covalency of the Si/Al(1)-O bond, synergistically improving Q×f values. Importantly, Ge4+ substitution preserved the ultra-low εr and near-zero τf values by maintaining the polarization characteristics and crystal structural stability of BaMg2Al6Si9O30-based ceramics. The optimized BaMg2Al6Si7.75Ge1.25O30 ceramic achieved excellent microwave dielectric properties: εr = 5.84, Q×f = 32,351 GHz, τf = ‒7.27 ppm/°C, and an ultra-low CTE of +1.07 ppm/°C. The successful co-regulation of the Q×f and CTE values was attributed to the polyhedral coupling strategy, which leveraged the structural features of the osumilite-type ceramics to synergistically optimize the tilting and distortion of critical polyhedra.