QYQahtan. A. Yousif

Qahtan. A. Yousif

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qahtan. A. Yousif has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electronic structure–performance relationship in pyridine-based Schiff bases: a dual experimental–DFT study on corrosion inhibition

    by Qahtan A. Yousif, Mahmoud A. Bedair

    Two pyridine-based Schiff bases, N -(4-bromobenzylidene)pyridin-3-amine (BBPA) and N -[4-(dimethylamino)benzylidene]pyridin-3-amine (DBPA), were synthesized and evaluated as corrosion inhibitors for carbon steel in 1.0 M HCl.

  • Open Access

    High-performance corrosion inhibitors for carbon steel in hydrochloric acid: electrochemical and DFT studies

    by Qahtan A. Yousif, Mahmoud A. Bedair, Ahmed M. Abuelela, Azaj Ansari, Sumit Sahil Malhotra, Zainb Fadel

    This research examines the corrosion inhibition efficiency of two novel compounds, AEPA and DOCA, on carbon steel in 1.0 M hydrochloric acid. Both AEPA and DOCA demonstrated excellent electrochemical performance as corrosion inhibitors, with inhibition efficiencies exceeding 93% at a concentration of 10 mM, as confirmed through potentiodynamic polarization (PDP), electrochemical frequency modulation (EFM), and electrochemical impedance spectroscopy (EIS) techniques. EIS analysis revealed a marked increase in charge transfer resistance (Rct), reaching 387.55 Ω cm2 for AEPA and 345.80 Ω cm2 for DOCA, indicating the formation of a robust protective layer on the carbon steel surface. Adsorption studies confirmed that both inhibitors follow the Langmuir isotherm model, suggesting monolayer chemisorption. The calculated adsorption equilibrium constants with corresponding Gibbs free energy values of −29.53 kJ per mol (AEPA) and −29.30 kJ per mol (DOCA), respectively, indicating spontaneous and strong adsorption interactions. Theoretical insights from density functional theory (DFT) calculations revealed that AEPA possesses a higher HOMO energy (−5.65 eV) and a lower LUMO energy (−1.12 eV) compared to DOCA (HOMO: −6.70 eV, LUMO: −0.85 eV), resulting in a smaller energy gap (ΔE = 4.53 eV for AEPA vs. 5.85 eV for DOCA). This suggests that AEPA has a greater electron-donating ability and stronger interaction with the metal surface. The integration of experimental and theoretical approaches provides a comprehensive understanding of their inhibition mechanisms and highlights their potential for practical applications in corrosion protection.


  • Open Access

    Safflower plant extract as a sustainable corrosion inhibitor for carbon steel in acidic media: a combined electrochemical and computational study

    by Qahtan A. Yousif, Sumit Sahil Malhotra, Mahmoud A. Bedair, Azaj Ansari, Ali K. Hadi

    This study investigates the corrosion inhibition efficiency of safflower plant (SP) extract on carbon steel in hydrochloric acid (HCl) solutions. The SP extract, obtained through Soxhlet extraction, was tested for its ability to reduce corrosion using electrochemical techniques, including potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and electrochemical frequency modulation (EFM). The study revealed that the SP extract functions as an effective mixed-type inhibitor, significantly reducing the corrosion current density and enhancing inhibition efficiency at concentrations up to 2.5 g L−1. It achieved an inhibition efficiency of 89.56% at 2.5 g L−1. The adsorption mechanism is described in terms of both physical and chemical adsorption processes, with the Langmuir isotherm fitting the adsorption data. Computational modeling using density functional theory (DFT) further supported the experimental findings, identifying key active compounds in SP extract that contribute to its inhibitory performance. The study demonstrates the potential of SP extract as a sustainable and eco-friendly corrosion inhibitor for industrial applications.


  • Open Access

    Design of New Ecofriendly Schiff Base Inhibitors for Carbon Steel Corrosion Protection in Acidic Solutions: Electrochemical, Surface, and Theoretical Studies

    by Qahtan A. Yousif, Ahmed Abdel Nazeer, Zainb Fadel, Latifa A. Al-Hajji, Kamal Shalabi

    Corrosion poses a significant problem for several industrial sectors, inducing continuous research and development of corrosion inhibitors for use across a wide range of industrial applications. Here, we report the effectiveness of three newly developed Schiff bases derived from amino acids and 4-aminoacetophenone, namely, AIP, AMB, and AImP, as environmentally friendly corrosion inhibitors for Q235 steel in hydrochloric acid using electrochemical and surface analyses, in addition to theoretical techniques. The electrochemical findings of potentiodynamic polarization (PDP) demonstrated that the explored compounds serve as mixed-type inhibitors and can effectively suppress steel corrosion, with maximal protection efficiencies of 93.15, 96.01, and 77.03% in the presence of AIP, AMB, and AImP, respectively, at a concentration of 10 mM. The electrochemical impedance spectroscopy (EIS) and polarization results confirmed the growth of a durable protective barrier on the steel surface in the existence of the inhibitors, which is responsible for decreasing the metallic dissolution. Results were further supported by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), UV-vis, and Fourier transform infrared (FTIR), which ascribed the development of inhibitor-adsorption films on the steel surface. The results of EDS and XPS analyses demonstrated the existence of the distinctive elements of the inhibitors on the metallic surface. Furthermore, density functional theory (DFT) calculations and Monte Carlo (MC) simulations showed the electronic structure of the examined inhibitors and their optimized adsorption configurations on the steel surface, which helped in explaining the anticorrosion mechanism. Finally, the theoretical and experimental findings exhibit a high degree of consistency.


  • Open Access

    Insight into the corrosion mitigation performance of three novel benzimidazole derivatives of amino acids for carbon steel (X56) in 1 M HCl solution

    by Qahtan A. Yousif, Zainb Fadel, Ahmed M. Abuelela, Eid H. Alosaimi, Saad Melhi, Mahmoud A. Bedair

    Three new organic molecules having a benzimidazole base were synthesized and used for the protection of carbon steel (X56) against corrosion in 1.00 M HCl solution. The protection against corrosion was assessed by electrochemical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP). In addition, the electronic and molecular structure of the synthesized molecules were computationally investigated and correlated to corrosion inhibition. Global reactivity descriptors, molecular orbitals (FMO and NBO) and local reactivity descriptors (molecular electrostatic potential map and Fukui functions) were discussed. The results showed a maximum protective efficiency range between 95% and 98% indicating high corrosion inhibition. Moreover, all molecules were able to combat the cathodic as well as anodic reaction simultaneously, revealing a mixed-type resistance. SEM and EDX verified effective adhering film formation to the metal surface. In accordance, the theoretical calculations showed effective electron reallocation from the organic film to the X56 c-steel surface. Furthermore, the adsorption annealing calculations revealed that structural layers of these molecules hold parallel and close to the metal surface with adsorption energy from 249.383 to 380.794 kcal mol−1, showing strong inhibitor-metal contact.


  • Open Access

    Surface protection against corrosion of Ni turbine blades by electrophoretic deposition of MnO2, TiO2 and TiO2–C nanocoating

    by Qahtan. A. Yousif, Mohammad N. Majeed, Mahmoud A. Bedair

    MnO2, TiO2 and TiO2–C nanomaterials have been coated on the nickel alloy, which is the composition of turbine blades, by the electrophoretic deposition technique for protection against the corrosion process.


  • Open Access

    Study of the Corrosion of Nickel–Chromium Alloy in an Acidic Solution Protected by Nickel Nanoparticles

    by Mohammad N. Majeed, Qahtan. A. Yousif, Mahmoud A. Bedair

    This study uses nickel nanoparticles coated on the nickel-chromium (Ni-Cr) alloy by the electrodeposition technique to protect the alloy against corrosion. An open-circuit potential and potentiodynamic and linear polarization resistance in a 1 M H2SO4 solution saturated with carbon dioxide were used to study the anticorrosion performance of nanoparticle coatings. When coated with nanomaterials, the corrosion rate of Ni-Cr alloy was lower than when it was bare, and the potential for corrosion increased from -0.433 V for uncoated Ni-Cr alloy to -0.103 V when the electrodes were exposed to saturated calomel. Electrochemical experiments show that nickel-coated Ni-Cr alloy corrosion in sulfuric acid media has high protective characteristics, with an efficiency of 83.69% at 0.165 mA/cm2 current density when pH = 1 is used. As demonstrated by the results of this research, the nickel-chromium alloy can be protected from corrosion in acidic media by a low-acidity bath coating layer. Surface morphologies have shown that coatings at different acidic scales may be able to resist an acid attack because of their excellent adherence to the nickel-chromium alloy surface. Measures for determining and studying the composition of the alloy surface's protective covering were improved using X-ray diffraction (XRD).


  • Open Access

    A simple, step-by-step approach for the preparation of MoO3@g-C3N4 nanocomposite

    by Amina H. Mohammed, Qahtan.A. Yousif

    We present a simple step-by-step method for the preparation of MoO3@g-C3N4 nanocomposite. Several approaches were used to prepare and characterize the nanocomposite with a weight ratio of MoO3 (0.075). X-ray diffraction measurements have revealed The primary peaks of MoO3 at 13.14°, 23.74°, 26.07°, 27.71°, 29.98°, and 39.33° correspond to the iq (020), (110), (040), (120), (021), and (060) planes, and the g-C3N4 appearing at 27.49° and 12.94° corresponds to the (002) and (100) planes in the MoO3@g-C3N4 nanocomposite. The specific bands for the as-prepared nanocomposite were revealed by Fourier-transform infrared. With the H3 hysteresis loops, the BET isotherm and the BJH technique produced results compatible with Type IV. Furthermore, the results indicated the effective change in surface area, pore-volume, and pore diameter values were larger in the MoO3@g-C3N4 nanocomposite. Diffuse spectroscopy of reflection data revealed more information about the changes that occurred when MoO3 was loaded on the g-C3N4 layers to shift the spectrum to the red extent while decreasing the band gap to 2.63 eV. Furthermore, field emission electron spectroscopy has proven the synthesis of nanocomposite by a dramatic change in the morphological surface as well as a change in the composition of elements that have been demonstrated using the energy-dispersive X-ray spectroscopy methodology. This discovery has improved the form and structure of the MoO3@g-C3N4 nanocomposite


  • Open Access

    Synthesizing nanocomposite TiO2@ZnFe2O4 using a simple one-pot solvothermal technique

    by Zainab D. Rsen, Qahtan.A. Yousif

    This paper reports solvothermically the synthesis of TiO2@ZnFe2O4 nanocomposite. It was synthesized and characterized by several procedures with a weight ratio of 2 percent. X-ray diffraction tests were detected at 24.45° to show the typical weak peaks in TiO2@ZnFe2O4, confirming TiO2 (anatase) at 30.10°, 35.47°, 41.06°, 45.64°, 56.64° and 62.51°, which represent a characteristic peak of the ZnFe2O4 - orientations (220), (311), (400), (422), (511) and (440), respectively. The nanocomposite has been found to have significant peaks at 311° and 411°. The preparation of TiO2@ZnFe2O4 nanocomposite is confirmed by Fourier-transform infrared. FESEM was also conducted to analyze TiO2@ZnFe2O4’s shape and structure. In addition, information in line with IUPAC type III and the H2 hysteresis loops were provided by the BET isotherm and the BJH technique. In the surface, pore-volume, and pore diameter, the findings have supported effective changes. Diffuse reflection spectroscopy gave more information on the modifications that occurred in the nanocomposite to alter the spectrum to the red region while reducing the band gap to 1.65 eV. These findings have strengthened the structure of nanocomposite as-prepared.