Fatirah Fadil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fatirah Fadil has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Mukifza Harun
Nano Lab, Faculty Engineering, University Malaysia Sabah, Kota Kinabalu 88400, Sabah, Malaysia
5 shared publications - Mohammad Khursheed Alam
Department of Preventive Dentistry, Jouf University, Sakakah, Saudi Arabia
5 shared publications - Nor Dalila Nor Affandi
Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Selangor, Malaysia
5 shared publications Mohd Iqbal Misnon
Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM), Shah Alam, Selangor, Malaysia
2 shared publications- Mohd Iqbal Misnon
School of Industrial Technology, Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam, Malaysia
2 shared publications Nor Dalila Nor Affandi
Textile Research Group, Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM), Shah Alam, Selangor, Malaysia
2 shared publications
Latest Publications
- Open Access
- 18 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Improvement of Moisture Management Properties of Face Masks Using Electrospun Nanofiber Filter Insert
Face coverings such as a face mask are one of the important preventive measures amidst the COVID-19 pandemic, by limiting exhaled particles and reducing expiratory droplet spread. Adding a filter to face masks may offer extra protection against the virus. Nevertheless, there remains a significant concern where thicker, tightly woven materials of masks may reduce the ability to breathe comfortably, due to inadequate moisture management properties of woven fabric in existing disposable surgical face masks. Therefore, the study on the properties of air permeability, water vapor permeability, and flexural rigidity of a face mask fabric is highly essential. This study is aimed at analyzing the potential application of electrospun nanofibers fabricated from electrospinning technique, as filter inserts in commercial surgical face masks. The function of electrospun nanofiber filter (NF) inserted in commercial surgical face masks was introduced in the study. The results indicated the significant reduction in air permeability and water vapor permeability along with the additional usage of electrospun NF within the surgical face masks, due to the smaller fiber size and interspaces in the filter layer as analyzed from FESEM analysis. The percentage of air permeability value was slightly decreased by 15.9%, from 339.5 to 285.5 mm/s, whereas the value of flexural rigidity of surgical face masks with and without electrospun NF insert is 0.1358 and 0.1207 mg/cm, respectively. Hence, the NF inserts are recommended as the potential core component in a face mask.
- 18 January 2022
- Published by SAGE Publications in Adsorption Science & Technology
- Vol. 2022
Open AccessImprovement of Moisture Management Properties of Face Masks Using Electrospun Nanofiber Filter Insert
Face coverings such as a face mask are one of the important preventive measures amidst the COVID-19 pandemic, by limiting exhaled particles and reducing expiratory droplet spread. Adding a filter to face masks may offer extra protection against the virus. Nevertheless, there remains a significant concern where thicker, tightly woven materials of masks may reduce the ability to breathe comfortably, due to inadequate moisture management properties of woven fabric in existing disposable surgical face masks. Therefore, the study on the properties of air permeability, water vapor permeability, and flexural rigidity of a face mask fabric is highly essential. This study is aimed at analyzing the potential application of electrospun nanofibers fabricated from electrospinning technique, as filter inserts in commercial surgical face masks. The function of electrospun nanofiber filter (NF) inserted in commercial surgical face masks was introduced in the study. The results indicated the significant reduction in air permeability and water vapor permeability along with the additional usage of electrospun NF within the surgical face masks, due to the smaller fiber size and interspaces in the filter layer as analyzed from FESEM analysis. The percentage of air permeability value was slightly decreased by 15.9%, from 339.5 to 285.5 mm/s, whereas the value of flexural rigidity of surgical face masks with and without electrospun NF insert is 0.1358 and 0.1207 mg/cm, respectively. Hence, the NF inserts are recommended as the potential core component in a face mask.
- Open Access
A Review on Antimicrobial Packaging from Biodegradable Polymer Composites
The development of antimicrobial packaging has been growing rapidly due to an increase in awareness and demands for sustainable active packaging that could preserve the quality and prolong the shelf life of foods and products. The addition of highly efficient antibacterial nanoparticles, antifungals, and antioxidants to biodegradable and environmentally friendly green polymers has become a significant advancement trend for the packaging evolution. Impregnation of antimicrobial agents into the packaging film is essential for impeding or destroying the pathogenic microorganisms causing food illness and deterioration. Higher safety and quality as well as an extended shelf life of sustainable active packaging desired by the industry are further enhanced by applying the different types of antimicrobial packaging systems. Antimicrobial packaging not only can offer a wide range of advantages, but also preserves the environment through usage of renewable and biodegradable polymers instead of common synthetic polymers, thus reducing plastic pollution generated by humankind. This review intended to provide a summary of current trends and applications of antimicrobial, biodegradable films in the packaging industry as well as the innovation of nanotechnology to increase efficiency of novel, bio-based packaging systems.
Open AccessA Review on Antimicrobial Packaging from Biodegradable Polymer Composites
The development of antimicrobial packaging has been growing rapidly due to an increase in awareness and demands for sustainable active packaging that could preserve the quality and prolong the shelf life of foods and products. The addition of highly efficient antibacterial nanoparticles, antifungals, and antioxidants to biodegradable and environmentally friendly green polymers has become a significant advancement trend for the packaging evolution. Impregnation of antimicrobial agents into the packaging film is essential for impeding or destroying the pathogenic microorganisms causing food illness and deterioration. Higher safety and quality as well as an extended shelf life of sustainable active packaging desired by the industry are further enhanced by applying the different types of antimicrobial packaging systems. Antimicrobial packaging not only can offer a wide range of advantages, but also preserves the environment through usage of renewable and biodegradable polymers instead of common synthetic polymers, thus reducing plastic pollution generated by humankind. This review intended to provide a summary of current trends and applications of antimicrobial, biodegradable films in the packaging industry as well as the innovation of nanotechnology to increase efficiency of novel, bio-based packaging systems.
- Open Access
- 7 October 2021
- Published by Wiley in Advances in Polymer Technology
- Vol. 2021, 1-10
Advanced Application of Electrospun Polycaprolactone Fibers for Seed Germination Activity
The increasing intensity of coronavirus (COVID-19) spreading emphasizes the significant development in home food production to reduce the incoming socioeconomic impact from soaring food prices, supply chain fragility, and severe economic crisis. This preliminary study was initiated to demonstrate the possibility of using electrospun fibers as a potential substrate in the application of seed germination activity. The drive of this preliminary study was to integrate the electrospun nanofiber-based material in exploring the current surge in home food production via seed germination in order to introduce cheap source of food without being distracted by the pandemic impact in general. Mung bean (Vigna radiata L. Wilczek) was chosen as it is easy and fast to sprout. Four samples of poly (ε-caprolactone)- (PCL-) based fibers were prepared by means of electrospinning technique, with the optimized flow rate between 0.05 and 0.20ml/min at a fixed distance of 10cm needle tip to collector. Mung bean seeds were allowed to germinate on the fabricated electrospun PCL fibers for 96 hours. Our observations include germination percentage, seedling weight, radicle length, and plumule growth. The highest radicle length and plumule length of seedlings were 27.8mm and 6.7mm, respectively. There were no inhibitory effects on seed germination and minimal structural fragmentation of smaller diameter electrospun fibers as revealed by FESEM. These results show that the seeds were able to germinate on electrospun PCL fiber substrate, owing to the properties of high surface area and excellent fluid water uptake of PCL fibers.
- 7 October 2021
- Published by Wiley in Advances in Polymer Technology
- Vol. 2021, 1-10
Open AccessAdvanced Application of Electrospun Polycaprolactone Fibers for Seed Germination Activity
The increasing intensity of coronavirus (COVID-19) spreading emphasizes the significant development in home food production to reduce the incoming socioeconomic impact from soaring food prices, supply chain fragility, and severe economic crisis. This preliminary study was initiated to demonstrate the possibility of using electrospun fibers as a potential substrate in the application of seed germination activity. The drive of this preliminary study was to integrate the electrospun nanofiber-based material in exploring the current surge in home food production via seed germination in order to introduce cheap source of food without being distracted by the pandemic impact in general. Mung bean (Vigna radiata L. Wilczek) was chosen as it is easy and fast to sprout. Four samples of poly (ε-caprolactone)- (PCL-) based fibers were prepared by means of electrospinning technique, with the optimized flow rate between 0.05 and 0.20ml/min at a fixed distance of 10cm needle tip to collector. Mung bean seeds were allowed to germinate on the fabricated electrospun PCL fibers for 96 hours. Our observations include germination percentage, seedling weight, radicle length, and plumule growth. The highest radicle length and plumule length of seedlings were 27.8mm and 6.7mm, respectively. There were no inhibitory effects on seed germination and minimal structural fragmentation of smaller diameter electrospun fibers as revealed by FESEM. These results show that the seeds were able to germinate on electrospun PCL fiber substrate, owing to the properties of high surface area and excellent fluid water uptake of PCL fibers.
- Open Access
- 10 August 2021
- Published by MDPI AG in Antibiotics
- Vol. 10 (8) , 961
The Antimicrobial Properties of Nanotitania Extract and Its Role in Inhibiting the Growth of Klebsiella pneumonia and Haemophilus influenza
Titanium dioxide (TiO2) is an antimicrobial agent which is considered of potential value in inhibiting the growth of multiple bacteria. Klebsiella pneumonia and Haemophilus influenza are two of the most common respiratory infection pathogens, and are the most. Klebsiella pneumonia causes fatal meningitis, while Haemophilus influenza causes mortality even in younger patients. Both are associated with bacteremia and mortality. The purpose of this study was to test a new antibacterial material, namely nanotitania extract combined with 0.03% silver that was developed at Universiti Malaysia Sabah (UMS) and tested against K. pneumonia and H. influenza. The nanoparticles were synthesized through a modified hydrothermal process, combined with molten salt and proven to have excellent crystallinity, with the band-gap energy falling in the visible light spectrum. The nanoparticle extract was tested using a macro-dilutional method, which involved combining it with 0.03% silver solution during the process of nanoparticle synthesis and then introducing it to the bacteria. A positive control containing the bacteria minus the nanoparticles extract was also prepared. 25 mg/mL, 12.5 mg/mL, and 6.25 mg/mL concentrations of the samples were produced using the macro dilution method. After adding the bacteria to multiple concentrations of nanoparticle extract, the suspensions were incubated for 24 h at a temperature of 37 °C. The suspensions were then spread on Mueller-Hinton agar (K. pneumonia) and chocolate blood agar (H. influenza), where the growth of bacteria was observed after 24 h. Nanoparticle extract in combination with silver at 0.03% was proven to have potential as an antimicrobial agent as it was able to inhibit H. influenza at all concentrations. Furthermore, it was also shown to be capable of inhibiting K. pneumonia at concentrations of 25 mg/mL and 50 mg/mL. In conclusion, the nanoparticle extract, when tested using a macro-dilutional method, displayed antimicrobial properties which were proven effective against the growth of both K. pneumonia and H. influenza.
- 10 August 2021
- Published by MDPI AG in Antibiotics
- Vol. 10 (8) , 961
Open AccessThe Antimicrobial Properties of Nanotitania Extract and Its Role in Inhibiting the Growth of Klebsiella pneumonia and Haemophilus influenza
Titanium dioxide (TiO2) is an antimicrobial agent which is considered of potential value in inhibiting the growth of multiple bacteria. Klebsiella pneumonia and Haemophilus influenza are two of the most common respiratory infection pathogens, and are the most. Klebsiella pneumonia causes fatal meningitis, while Haemophilus influenza causes mortality even in younger patients. Both are associated with bacteremia and mortality. The purpose of this study was to test a new antibacterial material, namely nanotitania extract combined with 0.03% silver that was developed at Universiti Malaysia Sabah (UMS) and tested against K. pneumonia and H. influenza. The nanoparticles were synthesized through a modified hydrothermal process, combined with molten salt and proven to have excellent crystallinity, with the band-gap energy falling in the visible light spectrum. The nanoparticle extract was tested using a macro-dilutional method, which involved combining it with 0.03% silver solution during the process of nanoparticle synthesis and then introducing it to the bacteria. A positive control containing the bacteria minus the nanoparticles extract was also prepared. 25 mg/mL, 12.5 mg/mL, and 6.25 mg/mL concentrations of the samples were produced using the macro dilution method. After adding the bacteria to multiple concentrations of nanoparticle extract, the suspensions were incubated for 24 h at a temperature of 37 °C. The suspensions were then spread on Mueller-Hinton agar (K. pneumonia) and chocolate blood agar (H. influenza), where the growth of bacteria was observed after 24 h. Nanoparticle extract in combination with silver at 0.03% was proven to have potential as an antimicrobial agent as it was able to inhibit H. influenza at all concentrations. Furthermore, it was also shown to be capable of inhibiting K. pneumonia at concentrations of 25 mg/mL and 50 mg/mL. In conclusion, the nanoparticle extract, when tested using a macro-dilutional method, displayed antimicrobial properties which were proven effective against the growth of both K. pneumonia and H. influenza.
- Open Access
Review on Electrospun Nanofiber-Applied Products
Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.
Open AccessReview on Electrospun Nanofiber-Applied Products
Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.
- Open Access
Dope-Dyeing of Polyvinyl Alcohol (PVA) Nanofibres with Remazol Yellow FG
The lack of aesthetic properties of electrospun nanofibres in terms of colour appearance is the drive in this preliminary study. This research is conducted to study the dyeing behaviour and colorimetric properties of electrospun nanofibres blended with Remazol Yellow FG reactive dye using dope-dyeing method via electrospinning process. This paper reports the colorimetric properties of dyed poly vinyl alcohol (PVA) nanofibres within the range of 2.5 wt.% to 12.5 wt.% dye content. The electrospinning parameters were fixed at the electrospinning distance of 10 cm, constant feed rate of 0.5 mL/h and applied voltage of 15 kV. The resulting impregnated dye of 10 wt.% exhibits acceptable colour difference of dyed PVA nanofibres, with a mean fibre diameter of 177.1 ± 11.5 nm. The SEM micrographs show the effect of dye content on morphology and fibre diameter upon the increment of dye used. Further increase of dye content adversely affects the jet stability during the electrospinning, resulting in macroscopic dropping phenomenon. The presence of all prominent peaks of Remazol dye in the PVA nanofibers was supported with FTIR analysis. The addition of dye into the nanofibres has resulted in the enhancement of thermal stability of the PVA as demonstrated by TGA analysis.
Open AccessDope-Dyeing of Polyvinyl Alcohol (PVA) Nanofibres with Remazol Yellow FG
The lack of aesthetic properties of electrospun nanofibres in terms of colour appearance is the drive in this preliminary study. This research is conducted to study the dyeing behaviour and colorimetric properties of electrospun nanofibres blended with Remazol Yellow FG reactive dye using dope-dyeing method via electrospinning process. This paper reports the colorimetric properties of dyed poly vinyl alcohol (PVA) nanofibres within the range of 2.5 wt.% to 12.5 wt.% dye content. The electrospinning parameters were fixed at the electrospinning distance of 10 cm, constant feed rate of 0.5 mL/h and applied voltage of 15 kV. The resulting impregnated dye of 10 wt.% exhibits acceptable colour difference of dyed PVA nanofibres, with a mean fibre diameter of 177.1 ± 11.5 nm. The SEM micrographs show the effect of dye content on morphology and fibre diameter upon the increment of dye used. Further increase of dye content adversely affects the jet stability during the electrospinning, resulting in macroscopic dropping phenomenon. The presence of all prominent peaks of Remazol dye in the PVA nanofibers was supported with FTIR analysis. The addition of dye into the nanofibres has resulted in the enhancement of thermal stability of the PVA as demonstrated by TGA analysis.
- 10 June 2019
- Published by Taylor & Francis in Journal of Macromolecular Science, Part A
- Vol. 56 (10) , 960-967
Mechanical behaviour of MWCNTs reinforced electrospun nanofibres
The nanoscale dimension of electrospun polymeric nanofibres produced by electrospinning are highly captivating, yet facing limitation of resisting external forces due to the weak tensile properties. Carbon nanotubes providing tremendous toughness due to extraordinary strong sp2 bonding network of carbon atoms in honeycomb lattice structure, augmented the physical resistant strength and is easily recover to its original state after load is removed. This study reports the performance of multi-walled carbon nanotubes (MWCNTs) as filler in the electrospinning of poly (L-lactide)-co-ε-caprolactone) (PLCL) composite nanofibres. Voltage of 10 kV is applied to the spinning solution mixture of 11 wt% (w/v) PLCL and MWCNTs, yielded nanofibres having diameters less than 400 nm. Results obtained showed the formation of composite nanofibres with tailored tensile behavior by modifying the content of MWCNTs. The addition of MWCNTs improved the tensile properties of resultant composite nanofibres, signified by tensile strength of 5.82 to 15.95 MPa, which were obtained using 0.1 to 1.0 wt% of MWCNTs. The structural integrity of nanofibres mats were retained in phosphate buffer saline (PBS) medium. Scanning Electron Microscopy (SEM) micrographs revealed the minimal of fiber deformation over 30 days of incubation and are closely identical to the initial diameter of as-spun fiber.
- 10 June 2019
- Published by Taylor & Francis in Journal of Macromolecular Science, Part A
- Vol. 56 (10) , 960-967
Mechanical behaviour of MWCNTs reinforced electrospun nanofibres
The nanoscale dimension of electrospun polymeric nanofibres produced by electrospinning are highly captivating, yet facing limitation of resisting external forces due to the weak tensile properties. Carbon nanotubes providing tremendous toughness due to extraordinary strong sp2 bonding network of carbon atoms in honeycomb lattice structure, augmented the physical resistant strength and is easily recover to its original state after load is removed. This study reports the performance of multi-walled carbon nanotubes (MWCNTs) as filler in the electrospinning of poly (L-lactide)-co-ε-caprolactone) (PLCL) composite nanofibres. Voltage of 10 kV is applied to the spinning solution mixture of 11 wt% (w/v) PLCL and MWCNTs, yielded nanofibres having diameters less than 400 nm. Results obtained showed the formation of composite nanofibres with tailored tensile behavior by modifying the content of MWCNTs. The addition of MWCNTs improved the tensile properties of resultant composite nanofibres, signified by tensile strength of 5.82 to 15.95 MPa, which were obtained using 0.1 to 1.0 wt% of MWCNTs. The structural integrity of nanofibres mats were retained in phosphate buffer saline (PBS) medium. Scanning Electron Microscopy (SEM) micrographs revealed the minimal of fiber deformation over 30 days of incubation and are closely identical to the initial diameter of as-spun fiber.
- Open Access
- 1 January 2019
- Published by Taylor & Francis in Journal of Experimental Nanoscience
- Vol. 14 (1) , 23-32
Identification of surfactants aggregates on graphitic surface of carbon nanotubes
There are a relatively large number of studies on surfactants facilitates the dispersion of multi-walled carbon nanotubes (MWCNTs), however reports for both orientation and size aggregation of surfactants on MWCNTs are scarcely described. In this study, we demonstrate the visualization of the surfactants aggregates onto MWCNTs using atomic force microscopic (AFM) and field emission electron scanning microscopy (FESEM) to provide information on the orientation and the grains size of surfactants-MWCNTs aggregates. MWCNTs treated with surfactants of different charges, namely sodium dodecyl sulphate (SDS), the anionic, cetyltrimethyl ammonium bromide (CTAB), the cationic and polysorbate 80 (Tween-80), the non-ionic, displayed substantial pattern of surfactant-MWCNTs surface contours. Raman spectroscopy analysis has been presented in order to report the characteristic of defective MWCNTs graphitize structure upon non-covalent adsorption of respective surfactants.
- 1 January 2019
- Published by Taylor & Francis in Journal of Experimental Nanoscience
- Vol. 14 (1) , 23-32
Open AccessIdentification of surfactants aggregates on graphitic surface of carbon nanotubes
There are a relatively large number of studies on surfactants facilitates the dispersion of multi-walled carbon nanotubes (MWCNTs), however reports for both orientation and size aggregation of surfactants on MWCNTs are scarcely described. In this study, we demonstrate the visualization of the surfactants aggregates onto MWCNTs using atomic force microscopic (AFM) and field emission electron scanning microscopy (FESEM) to provide information on the orientation and the grains size of surfactants-MWCNTs aggregates. MWCNTs treated with surfactants of different charges, namely sodium dodecyl sulphate (SDS), the anionic, cetyltrimethyl ammonium bromide (CTAB), the cationic and polysorbate 80 (Tween-80), the non-ionic, displayed substantial pattern of surfactant-MWCNTs surface contours. Raman spectroscopy analysis has been presented in order to report the characteristic of defective MWCNTs graphitize structure upon non-covalent adsorption of respective surfactants.