PPPilar Garcia Parejo

Pilar Garcia Parejo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pilar Garcia Parejo has a total of 320 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Polarimetric Calibration of the Tunable Magnetograph for the Sunrise III Mission

    by Antonio Campos-Jara, Alberto Álvarez-Herrero, Pilar García Parejo, Daniel Garranzo-García, Pablo Santamarina Guerrero, Francisco Javier Bailén, Alex Feller, Achim Gandorfer, David Orozco Suárez, Jose Carlos del Toro Iniesta

  • Open Access

    Jitter sensing and reconstruction from temporal series of solar images: Applications to TuMag

    by F. J. Bailén, D. Orozco Suárez, A. L. Siu-Tapia, H. Strecker, J. Blanco Rodríguez, D. Arroyo, P. Santamarina Guerrero, J. C. del Toro Iniesta, L. R. Bellot Rubio, C. Morrell, et al.

    Context. Images recorded with the Tunable Magnetograph (TuMag) instrument on board the S UNRISE III balloon observatory are affected by temporal contrast fluctuations. These variations are related to high-frequency vibrations (jitter) of the platform that cannot be entirely compensated by the image stabilization unit of the telescope. Jitter smooths out mid- to high-frequency details and degrades the contrast of images that are integrated over hundreds of milliseconds to achieve the signal-to-noise levels required by the instrument. The temporal variations of jitter hamper the reconstruction of the data and limit the accuracy of the instrument. Aims. We present a technique that allows us to infer and compensate temporal changes of the amplitude and direction of jitter from two images of the same scene, provided they are recorded close enough in time to prevent the scene from evolving significantly. Methods. We assess the performance of our method through a dynamical magnetohydrodynamical simulation of the solar scene that is degraded with diffraction effects, noise, and jitter. We evaluate the performance of the algorithm as a function of the jitter amplitude and as a function of the time gap between the two images. We finally apply it to a time series recorded by TuMag to sense and restore the temporal evolution of jitter on the images. Results. Our numerical experiments show that the algorithm is able to sense jitter with an accuracy better than 0.″005 (≲0.1 px) for images recorded less than 10 s apart and assuming a worst-case scenario with a low signal-to-noise ratio of 100 and induced rms jitter amplitudes as large as 0.″15 in the X and Y directions. When increasing the time interval to 30 s, the errors found are still below 0.″01. For the chosen TuMag series we find that the jitter rms amplitudes vary strongly within the range 0.″05–0.″15 (∼1–4 px) and are anticorrelated to the contrast of the recorded images. Correction of jitter improves the contrast of wavefront-reconstructed images by 2.5% in some cases and reduces the rms variation of contrast along the series by half.


  • Open Access

    TuMag: The Tunable Magnetograph for the Sunrise III Mission

    by J. C. del Toro Iniesta, D. Orozco Suárez, A. Álvarez-Herrero, E. Sanchis Kilders, I. Pérez-Grande, B. Ruiz Cobo, L. R. Bellot Rubio, M. Balaguer Jiménez, A. C. López Jiménez, D. Álvarez García, et al.

    Sunrise iii is a balloon-borne solar observatory dedicated to the investigation of the processes governing the physics of the magnetic field and the plasma flows in the lower solar atmosphere. The gondola hosts a 1-m aperture telescope that feeds three post-focus instruments. One of these instruments, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field, $\bf{B}$ , and the line-of-sight (LoS) velocity, $v_{\mathrm{LoS}}$ v LoS , of the photosphere and the lower chromosphere. It provides polarized images with a $63^{\prime \prime }\times \, 63^{\prime \prime }$ 63 ″ × 63 ″ field of view (FoV) of the Sun in four polarization states. These images can later be processed on ground to retrieve maps of the aforementioned solar physical quantities. The quasi-simultaneous observation of two spectral lines sensitive to $\bf{B}$ and $v_{\mathrm{LoS}}$ v LoS in the photosphere and lower chromosphere provides excellent diagnostic measurements of the magnetic and dynamic coupling in these layers. When combined with the other two instruments on board, observing in the infrared and ultraviolet regions of the spectrum, TuMag’s diagnostic potential is expected to be greatly enhanced. Building upon heritage of instruments like IMaX and SO/PHI, the key technologies employed for TuMag are a liquid-crystal-variable-retarder-based polarimeter and a solid, LiNbO 3 Fabry–Pérot etalon as a spectrometer. However, it also incorporates several innovative features, such as in-house-made, high-sensitivity scientific cameras and a double filter wheel. The latter makes TuMag the first balloon-borne instrument of its type capable of tuning between spectral lines. Specifically, it can sequentially observe any two out of the three spectral lines of Fe i at 525.02 and 525.06 nm and of Mg i at 517.3 nm. Time cadences range from 30 to 100 seconds, depending on the observing mode and the specific pair of spectral lines targeted. Laboratory measurements have demonstrated good image quality, spectral resolution, and polarimetric efficiency. Here we report on the concept, design, calibration, and integration phases of the instrument, as well as on the data reduction pipeline.


  • Open Access

    Visible-light channel of the Metis/Solar Orbiter coronagraph: On-ground polarimetric calibration

    by M. Casti, S. Fineschi, G. Capobianco, A. Liberatore, M. Romoli, E. Antonucci, A. Álvarez-Herrero, V. Andretta, V. Da Deppo, F. Frassetto, et al.

    Context. Metis is the solar coronagraph on board the ESA/NASA mission Solar Orbiter (SolO), launched in 2020. It is designed to acquire simultaneous images of the solar corona in visible polarized light (580−640 nm), and in the narrowband H I Lyman-α line (i.e., 121.6 nm). The instrument visible-light channel includes a polarimeter composed of two liquid crystal variable retarder (LCVR) cells, a quarter-wave plate, and a linear polarizer, with the LCVR cells acting as the modulating element. By applying a specific voltage to the cells, it is possible to modify the incoming polarized light by changing the direction of the associated vector by a known angle, i.e., the angle of retardance. Aims. The polarimetric characterization of Metis is needed to correctly derive the properties of the plasma in the observed solar corona. This work describes the steps we took to fully characterize the visible channel of the Metis coronagraph, i.e., by deriving the modulation and demodulation matrices for each pixel, the latter being the key element for deriving the Stokes vector of the observed K corona. We completed the characterization by deriving the error associated with the derived values. Methods. The first step is to fully characterize the Metis polarimeter. This is needed to derive the relation between the voltage applied to the liquid crystal cells and the angle of retardance imposed on the incoming polarized light. This step represents the starting point for the calibration of the full instrument. Results. We derived (i) the voltage versus retardance curve associated with the polarimeter and (ii) the demodulation tensor of the Metis coronagraph, which is now used to retrieve the Stokes vector that describes the coronal light polarization state. Conclusions. This calibration is fundamental to disentangle the coronal light from the instrumental effects, such as disuniformity and instrumental polarization.


  • Top Cited Papers
    Open Access

    Sunrise iii: Overview of Observatory and Instruments

    by Andreas Korpi-Lagg, Achim Gandorfer, Sami K. Solanki, Jose Carlos del Toro Iniesta, Yukio Katsukawa, Pietro Bernasconi, Thomas Berkefeld, Alex Feller, Tino L. Riethmüller, Alberto Álvarez-Herrero, et al.

    In July 2024, Sunrise completed its third successful science flight. The Sunrise iii observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013, to tackle the most recent science challenges concerning the solar atmosphere. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly explored spectral regions and lines are exploited to paint a three-dimensional picture of the solar atmosphere with unprecedented completeness and level of detail. The full polarimetric information is captured by all three instruments to reveal the interaction between the magnetic fields and the hydrodynamic processes. Two slit-based spectropolarimeters, the Sunrise UV Spectropolarimeter and Imager (SUSI) and the Sunrise Chromospheric Infrared spectro-Polarimeter (SCIP), focus on the near-ultraviolet (309 – 417 nm) and the near-infrared (765 – 855 nm) regions respectively, and the imaging spectropolarimeter Tunable Magnetograph (TuMag) simultaneously obtains maps of the full field-of-view of $46\times 46$ 46 × 46 Mm2 in the photosphere and the chromosphere in the visible (525 and 517 nm). The instruments are operated in an orchestrated mode, benefiting from a new Image Stabilization and Light Distribution unit (ISLiD), with the Correlating Wavefront Sensor (CWS) providing the autofocus control and an image stability with a root-mean-square value smaller than 0.005”. A new gondola was constructed to significantly improve the telescope pointing stability, required to achieve uninterrupted observations over many hours. Sunrise iii was launched successfully on 10 July 2024, from the Esrange Space Center of the Swedish Space Corporation near Kiruna (Sweden). It reached the landing site between the Mackenzie River and the Great Bear Lake in Canada after a flight duration of 6.5 days. In this paper, we give an overview of the Sunrise iii observatory and its instruments.


  • Open Access

    Determination of the SO/PHI-HRT wavefront degradation using multiple defocused images

    by F. J. Bailén, D. Orozco Suárez, J. Blanco Rodríguez, J. C. del Toro Iniesta, H. Strecker, A. Moreno Vacas, P. Santamarina Guerrero, J. Hirzberger, K. Albert, N. Albelo Jorge, et al.

    Context. The Polarimetric and Helioseismic Imager on board the Solar Orbiter mission (SO/PHI) offers refocusing capabilities to cope with the strongly varying thermal environment of the optical system along the spacecraft’s elliptical orbit. The series of images recorded during in-flight focus calibrations can be employed for phase diversity analyses. Aims. In this work we infer the wavefront degradation caused by the thermo-optical effects in the High Resolution Telescope (HRT) from images taken during the fine and coarse focus scans performed in the commissioning phase of the instrument. The difference between these two series of images are mainly related to the employed defocused step (smaller for the fine scans) and the signal-to-noise ratio (higher for the coarse scans). We use the retrieved wavefronts to reconstruct the original scene observed during the calibration of the instrument. Methods. We applied a generalized phase diversity algorithm that allowed us to use several images taken with different amounts of defocus to sense the wavefront degradation caused by the instrument. The algorithm also uses information from both the inferred wavefront and the series of images to restore the solar scene. Results. We find that most of the retrieved Zernike coefficients tend to converge to the same value when increasing the number of images employed for PD for both the fine and the coarse focusing scans. The restored scenes also show signs of convergence, and the merit function is minimized more as K increases. Apart from a defocus, the inferred wavefronts are consistent for the two datasets (λ/10 − λ/11). For the fine scan images, the quiet-sun contrast improves from 4.5% for the original focused image up to about 10%. For the coarse scan images, the contrast of the restored scene is as high as 11%.


  • Open Access

    Stereoscopic disambiguation of vector magnetograms: First applications to SO/PHI-HRT data

    by G. Valori, D. Calchetti, A. Moreno Vacas, É. Pariat, S. K. Solanki, P. Löschl, J. Hirzberger, S. Parenti, K. Albert, N. Albelo Jorge, et al.

    Contact. Spectropolarimetric reconstructions of the photospheric vector magnetic field are intrinsically limited by the 180° ambiguity in the orientation of the transverse component. So far, the removal of such an ambiguity has required assumptions about the properties of the photospheric field, which makes disambiguation methods model-dependent. Aims. The successful launch and operation of Solar Orbiter have made the removal of the 180° ambiguity possible solely using observations of the same location on the Sun obtained from two different vantage points. Methods. The basic idea is that the unambiguous line-of-sight component of the field measured from one vantage point will generally have a nonzero projection on the ambiguous transverse component measured by the second telescope, thereby determining the “true” orientation of the transverse field. Such an idea was developed and implemented as part of the stereoscopic disambiguation method (SDM), which was recently tested using numerical simulations. Results. In this work we present a first application of the SDM to data obtained by the High Resolution Telescope (HRT) on board Solar Orbiter during the March 2022 campaign, when the angle with Earth was 27 degrees. The method was successfully applied to remove the ambiguity in the transverse component of the vector magnetogram solely using observations (from HRT and from the Helioseismic and Magnetic Imager) for the first time. Conclusions. The SDM is proven to provide observation-only disambiguated vector magnetograms that are spatially homogeneous and consistent. A discussion on the sources of error that may limit the accuracy of the method, and strategies to remove them in future applications, is also presented.


  • Open Access

    Stereoscopic disambiguation of vector magnetograms: first applications to SO/PHI-HRT data

    by G. Valori, D. Calchetti, A. Moreno Vacas, É. Pariat, S. K. Solanki, P. Löschl, J. Hirzberger, S. Parenti, K. Albert, N. Albelo Jorge, et al.

    Spectropolarimetric reconstructions of the photospheric vector magnetic field are intrinsically limited by the 180$^\circ$-ambiguity in the orientation of the transverse component. So far, the removal of such an ambiguity has required assumptions about the properties of the photospheric field, which makes disambiguation methods model-dependent. The basic idea is that the unambiguous line-of-sight component of the field measured from one vantage point will generally have a non-zero projection on the ambiguous transverse component measured by the second telescope, thereby determining the ``true'' orientation of the transverse field. Such an idea was developed and implemented in the Stereoscopic Disambiguation Method (SDM), which was recently tested using numerical simulations. In this work we present a first application of the SDM to data obtained by the High Resolution Telescope (HRT) onboard Solar Orbiter during the March 2022 campaign, when the angle with Earth was 27 degrees. The method is successfully applied to remove the ambiguity in the transverse component of the vector magnetogram solely using observations (from HRT and from the Helioseismic and Magnetic Imager), for the first time. The SDM is proven to provide observation-only disambiguated vector magnetograms that are spatially homogeneous and consistent. A discussion about the sources of error that may limit the accuracy of the method, and of the strategies to remove them in future applications, is also presented.

  • Open Access

    Direct assessment of SDO/HMI helioseismology of active regions on the Sun’s far side using SO/PHI magnetograms

    by D Yang, L Gizon, H Barucq, J Hirzberger, D Orozco Suárez, K Albert, N Albelo Jorge, T Appourchaux, A Alvarez-Herrero, J Blanco Rodríguez, et al.

    Context. Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun’s far side. In this work, we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) on board Solar Orbiter (SO) to directly assess the validity of far-side helioseismic holography for the first time. Aims. We wish to co-locate the positions of active regions in helioseismic images and magnetograms and to calibrate the helioseismic measurements in terms of the magnetic field strength. Methods. We identified three magnetograms displaying a total of six active regions on the far side from 18 November 2020, 3 October 2021, and 3 February 2022. The first two dates are from the SO cruise phase and the third is from the beginning of the nominal operation phase. We computed contemporaneous seismic phase maps for these three dates using helioseismic holography applied to the time series of Dopplergrams from the Helioseismic and Magnetic Imager (HMI) at the Solar Dynamics Observatory (SDO). Results. Among the six active regions seen in SO/PHI magnetograms, five of them are identified on the seismic maps at almost the same positions as on the magnetograms. One region is too weak to be detected above the seismic noise. To calibrate the seismic maps, we fit a linear relationship between the seismic phase shifts and the unsigned line-of-sight magnetic field averaged over the active region areas extracted from the SO/PHI magnetograms. Conclusions. SO/PHI provides the strongest evidence so far that helioseismic imaging is able to provide reliable information on active regions on the far side, including their positions, areas, and the mean unsigned magnetic field.


  • Open Access

    Direct assessment of SDO/HMI helioseismology of active regions on the Sun's far side using SO/PHI magnetograms

    by D. Yang, L. Gizon, H. Barucq, J. Hirzberger, D. Orozco Suárez, K. Albert, N. Albelo Jorge, T. Appourchaux, A. Alvarez-Herrero, J. Blanco Rodríguez, et al.

    Earth-side observations of solar p modes can be used to image and monitor magnetic activity on the Sun's far side. Here we use magnetograms of the far side obtained by the Polarimetric and Helioseismic Imager (PHI) onboard Solar Orbiter (SO) to directly assess -- for the first time -- the validity of far-side helioseismic holography. We wish to co-locate the positions of active regions in helioseismic images and magnetograms, and to calibrate the helioseismic measurements in terms of magnetic field strength. We identify three magnetograms on 18 November 2020, 3 October 2021, and 3 February 2022 displaying a total of six active regions on the far side. The first two dates are from SO's cruise phase, the third from the beginning of the nominal operation phase. We compute contemporaneous seismic phase maps for these three dates using helioseismic holography applied to time series of Dopplergrams from the Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO). Among the six active regions seen in SO/PHI magnetograms, five active regions are identified on the seismic maps at almost the same positions as on the magnetograms. One region is too weak to be detected above the seismic noise. To calibrate the seismic maps, we fit a linear relationship between the seismic phase shifts and the unsigned line-of-sight magnetic field averaged over the active region areas extracted from the SO/PHI magnetograms. SO/PHI provides the strongest evidence so far that helioseismic imaging provides reliable information about active regions on the far side, including their positions, areas, and mean unsigned magnetic field.