Aleksander Kalinin
Aleksander Kalinin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Prolygin
Siberian State Automobile and Highway University (SibADI)
3 shared publications - Anatoliy Sergeevich Aleksandrov
The Siberian State Automobile and Highway University (SibADI)
3 shared publications - Natalya Aleksandrova
The Siberian State Automobile and Highway University (SibADI)
3 shared publications G. V. Dolgikh
Siberian State Automobile and Highway University (SibADI)
1 shared publication- Gennadiy Dolgih
The Siberian State Automobile and Highway University
1 shared publication - Tatyana Semenova
The Siberian State Automobile and Highway University (SibADI)
1 shared publication
Latest Publications
- Open Access
- 18 March 2022
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 19 (1) , 114-130
Сomparative analysis of methods for calculating stamp modules of soil deformation
Introduction. The purpose of the article is a comparative analysis of methods for calculating stamp modules of soil deformation regulated by various standards of the Russian Federation.Materials and methods. The experimental determination of the deformation modules for the soil of the roadbed was performed using stamp tests. The tests were carried out in a soil tray by loading and unloading a soil base compacted to the required compaction coefficient of 0.98. The load was applied by steps, and the stamp draft was measured after completion of deformation stabilization from each step. The criterion for stabilizing the deformation was a decrease in the speed to 0.02 mm / min and the time of application of the load, which should be at least 120 s. After measuring the elasto-plastic draft of the soil, the model was unloaded. Unloading is also carried out by steps. As a result, the dependences of the elasto-plastic and elastic draft of the soil model of the roadbed from the pressure in the form of hysteresis loops are constructed.Results. The calculations of the soil deformation modulus were performed according to the various methods regulated by the standards of the Russian Federation. The calculation results are grouped into data samples that are processed by mathematical statistics methods. When processing data, each sample is checked for the presence of gross errors. The data samples are checked for belonging to one general population. To check whether three samples belong to one general population, the Kruskal W. H. and Wallis W. A. criterion was applied. Based on this comparison, we made judgments about the significance of differences in the samples.Discussion and conclusions. To determine the deformation modulus of soil and road pavements made of granular materials, a method for calculating the modulus of deformation using a method that assumes a nonlinear dependence of deformations on pressures, described by a second-degree polynomial is recommended.
- 18 March 2022
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 19 (1) , 114-130
Open AccessСomparative analysis of methods for calculating stamp modules of soil deformation
Introduction. The purpose of the article is a comparative analysis of methods for calculating stamp modules of soil deformation regulated by various standards of the Russian Federation.Materials and methods. The experimental determination of the deformation modules for the soil of the roadbed was performed using stamp tests. The tests were carried out in a soil tray by loading and unloading a soil base compacted to the required compaction coefficient of 0.98. The load was applied by steps, and the stamp draft was measured after completion of deformation stabilization from each step. The criterion for stabilizing the deformation was a decrease in the speed to 0.02 mm / min and the time of application of the load, which should be at least 120 s. After measuring the elasto-plastic draft of the soil, the model was unloaded. Unloading is also carried out by steps. As a result, the dependences of the elasto-plastic and elastic draft of the soil model of the roadbed from the pressure in the form of hysteresis loops are constructed.Results. The calculations of the soil deformation modulus were performed according to the various methods regulated by the standards of the Russian Federation. The calculation results are grouped into data samples that are processed by mathematical statistics methods. When processing data, each sample is checked for the presence of gross errors. The data samples are checked for belonging to one general population. To check whether three samples belong to one general population, the Kruskal W. H. and Wallis W. A. criterion was applied. Based on this comparison, we made judgments about the significance of differences in the samples.Discussion and conclusions. To determine the deformation modulus of soil and road pavements made of granular materials, a method for calculating the modulus of deformation using a method that assumes a nonlinear dependence of deformations on pressures, described by a second-degree polynomial is recommended.
- Open Access
- 25 November 2021
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 18 (5) , 614-632
Influence of soil moisture on the deformation properties of soil-crushed stone samples during compression
Introduction. The purpose of the article is to determine the dependence of the influence of soil moisture and the content of crushed stone in a soil-crushed stone sample on the secant modulus of deformation under uniaxial compression. The need for such a mathematical model is necessary in order to introduce correction factors to the values of the stamped deformation moduli of the gravel layer calculated from test data delivered at other soil moisture conditions, e.g. for flume or road tests during a non-calculated period of the year.Materials and methods. Cylindrical samples with a height of 20 cm and a diameter of 10 cm were made to perform tests using a large standard sealing device. The content of crushed stone of a mixture of fractions of 5-10 and 10-20 mm varied in the samples. The methods of saturation of samples with water and their testing by uniaxial compression are given. The rules for processing the experimental results are described, which include: correction of the initial part of the graphical dependence of deformation from pressure and statistical processing of the results. The analysis of methods for calculating the deformation modulus, which are classified into three types, is performed: secant module, tangent module and piecewise linear module. Based on this analysis, a method for calculating the deformation modulus of a soil-crushed stone sample under uniaxial compression is justified.Results. The results of experimental determination of the deformation characteristics of soil-crushed stone samples under uniaxial compression are presented. A mathematical model of the dependence of the deformation modulus of a soil-crushed stone sample from the soil moisture and the content of crushed stone used in the soil-crushed stone mixture is obtained.Discussion and conclusions. Recommendations are given on the application of the research results for the development of an album of standard constructions of road pavement of the lowest type in the districts of the Omsk region.
- 25 November 2021
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 18 (5) , 614-632
Open AccessInfluence of soil moisture on the deformation properties of soil-crushed stone samples during compression
Introduction. The purpose of the article is to determine the dependence of the influence of soil moisture and the content of crushed stone in a soil-crushed stone sample on the secant modulus of deformation under uniaxial compression. The need for such a mathematical model is necessary in order to introduce correction factors to the values of the stamped deformation moduli of the gravel layer calculated from test data delivered at other soil moisture conditions, e.g. for flume or road tests during a non-calculated period of the year.Materials and methods. Cylindrical samples with a height of 20 cm and a diameter of 10 cm were made to perform tests using a large standard sealing device. The content of crushed stone of a mixture of fractions of 5-10 and 10-20 mm varied in the samples. The methods of saturation of samples with water and their testing by uniaxial compression are given. The rules for processing the experimental results are described, which include: correction of the initial part of the graphical dependence of deformation from pressure and statistical processing of the results. The analysis of methods for calculating the deformation modulus, which are classified into three types, is performed: secant module, tangent module and piecewise linear module. Based on this analysis, a method for calculating the deformation modulus of a soil-crushed stone sample under uniaxial compression is justified.Results. The results of experimental determination of the deformation characteristics of soil-crushed stone samples under uniaxial compression are presented. A mathematical model of the dependence of the deformation modulus of a soil-crushed stone sample from the soil moisture and the content of crushed stone used in the soil-crushed stone mixture is obtained.Discussion and conclusions. Recommendations are given on the application of the research results for the development of an album of standard constructions of road pavement of the lowest type in the districts of the Omsk region.
- 7 September 2021
- Published by Springer Nature
- p. 71-81
Substantiation of the Method for Calculating Soil Deformation Modulus
- 7 September 2021
- Published by Springer Nature
- p. 71-81
Substantiation of the Method for Calculating Soil Deformation Modulus
- Open Access
- 31 December 2019
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 16 (6) , 718-745
RUTTING ON THE SURFACES OF NON-RIGID ROAD PAVEMENTS: ANALYSIS OF THE CAUSES AND RECOMMENDATIONS FOR REDUCING
Introduction.The works of reducing the intensity of rutting on the roads are relevant nowadays. Activities of improving the stability of road pavements include solving material problems, improving methods of calculation of structures and the development of new technologies to ensure high quality construction.Materials and methods.The analysis of data of natural and laboratory experimental researches established the reasons of formation of the rut on coverings of non-rigid road pavements. The authors presented the technique of experimental research of the tires passes’ distribution of vehicles on width of the traffic way and traffic lane. Moreover, the authors gave the coefficients for calculating the number of loads in the central and marginal parts of the coasting strips as well as in the inter-track space.Results.As a result, the authors suggested designs of road pavements with hidden rut elements, which placed on a surface of a highway subgrade on the basis of road pavement.Discussion and conclusions.As a result of the close proximity of the hidden track elements from each other, the soil of the subgrade between them experiences compression, in which the stress deviator is of the least importance compared to other stresses of the subgrade due to triaxial compression arising from both the moving load and its own weight pavement. The suggested variant helps to reduce significantly the deformation. For the successful implementation of hidden rut pavement, it is necessary to develop a new or reasonably choose a well-known method of calculating the depth of the rut, which is necessary to verify the criterion of gauge formation in the calculation of the thickness of hidden rut elements and the thickness of the pavement.The authors have read and approved the final manuscript. Financial transparency: the authors have no financial interest in the presented materials or methods. There is no conflict of interest.
- 31 December 2019
- Published by Siberian State Automobile and Highway University (SibADI) in The Russian Automobile and Highway Industry Journal
- Vol. 16 (6) , 718-745
Open AccessRUTTING ON THE SURFACES OF NON-RIGID ROAD PAVEMENTS: ANALYSIS OF THE CAUSES AND RECOMMENDATIONS FOR REDUCING
Introduction.The works of reducing the intensity of rutting on the roads are relevant nowadays. Activities of improving the stability of road pavements include solving material problems, improving methods of calculation of structures and the development of new technologies to ensure high quality construction.Materials and methods.The analysis of data of natural and laboratory experimental researches established the reasons of formation of the rut on coverings of non-rigid road pavements. The authors presented the technique of experimental research of the tires passes’ distribution of vehicles on width of the traffic way and traffic lane. Moreover, the authors gave the coefficients for calculating the number of loads in the central and marginal parts of the coasting strips as well as in the inter-track space.Results.As a result, the authors suggested designs of road pavements with hidden rut elements, which placed on a surface of a highway subgrade on the basis of road pavement.Discussion and conclusions.As a result of the close proximity of the hidden track elements from each other, the soil of the subgrade between them experiences compression, in which the stress deviator is of the least importance compared to other stresses of the subgrade due to triaxial compression arising from both the moving load and its own weight pavement. The suggested variant helps to reduce significantly the deformation. For the successful implementation of hidden rut pavement, it is necessary to develop a new or reasonably choose a well-known method of calculating the depth of the rut, which is necessary to verify the criterion of gauge formation in the calculation of the thickness of hidden rut elements and the thickness of the pavement.The authors have read and approved the final manuscript. Financial transparency: the authors have no financial interest in the presented materials or methods. There is no conflict of interest.
- 28 May 2019
- Published by Springer Nature
- p. 787-797
Equation of Limit Condition of the Three-Parameter Mohr-Coulomb Criterion
- 28 May 2019
- Published by Springer Nature
- p. 787-797
Equation of Limit Condition of the Three-Parameter Mohr-Coulomb Criterion