Lei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lei Wang has a total of 449 co-authors. Here are the top co-authors by number of shared publications:
Jiayi Chen
Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, Singapore
25 shared publications- Licheng Sun
Westlake University
23 shared publications Lele Duan
Department of Chemistry and Shenzhen Grubbs Institute Southern University of Science and Technology Shenzhen 518055 China
20 shared publicationsShibo Xi
Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology and Research (A*STAR) Jurong Island Singapore
19 shared publicationsJunmei Chen
17 shared publications- Thomas Francisco Jaramillo
Stanford University 443 Via Ortega
16 shared publications
Latest Publications
- 2 November 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13  (21) , 10450-10487
Laser-engineered electrocatalysts for CO 2 and CO reduction: from surface modification to non-equilibrium catalyst design
Non-equilibrium laser processing generates metastable, defect-rich surfaces and oxideâmetal interfaces on electrocatalysts, tuning intermediate binding to steer CO 2 and CO reduction toward CO, formate, or multicarbon products.
- 2 November 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13  (21) , 10450-10487
Laser-engineered electrocatalysts for CO 2 and CO reduction: from surface modification to non-equilibrium catalyst design
Non-equilibrium laser processing generates metastable, defect-rich surfaces and oxideâmetal interfaces on electrocatalysts, tuning intermediate binding to steer CO 2 and CO reduction toward CO, formate, or multicarbon products.
- 20 October 2026
- Published by Wiley in Angewandte Chemie
- p. e4817510
PotassiumâConcentrationâGated CâN Coupling Enables a VolcanoâShaped Selectivity Window for Electrocatalytic Urea Synthesis
Alkali metal cations influence electrochemical interfaces, but their role in regulating urea electrosynthesis remains incompletely understood. Here, we combine constantâpotential ab initio molecular dynamics (AIMD), classical molecular dynamics (cMD), flowâcell electrolysis, and in situ infrared spectroscopy to investigate how cations affect urea formation from CO 2 and nitrate on Cu. Among Li + , Na + , K + , and Cs + , K + affords the lowest calculated barrier for direct *COâ*NO coupling and the highest measured urea Faradaic efficiency. Varying the K + concentration reveals a volcanoâshaped dependence of urea activity and selectivity, with a maximum at a partial current density of 13.62 mA cm â2 and Faradaic efficiency of 24.50% near 1.20 M K + . AIMD calculations identify a minimum coupling barrier at an intermediate nominal K + concentration and elucidate how K + concentration regulates precursor geometry and charge redistribution. Complementary cMD simulations reveal concentrationâdependent changes in interfacial reactant distributions and water structure, with infrared spectral features providing experimental evidence of changes in interfacial reaction chemistry. Together, these results establish an optimal K + concentration window governed by the coupled roles of elementaryâstep kinetics and electrolyte organization in urea electrosynthesis.
- 20 October 2026
- Published by Wiley in Angewandte Chemie
- p. e4817510
PotassiumâConcentrationâGated CâN Coupling Enables a VolcanoâShaped Selectivity Window for Electrocatalytic Urea Synthesis
Alkali metal cations influence electrochemical interfaces, but their role in regulating urea electrosynthesis remains incompletely understood. Here, we combine constantâpotential ab initio molecular dynamics (AIMD), classical molecular dynamics (cMD), flowâcell electrolysis, and in situ infrared spectroscopy to investigate how cations affect urea formation from CO 2 and nitrate on Cu. Among Li + , Na + , K + , and Cs + , K + affords the lowest calculated barrier for direct *COâ*NO coupling and the highest measured urea Faradaic efficiency. Varying the K + concentration reveals a volcanoâshaped dependence of urea activity and selectivity, with a maximum at a partial current density of 13.62 mA cm â2 and Faradaic efficiency of 24.50% near 1.20 M K + . AIMD calculations identify a minimum coupling barrier at an intermediate nominal K + concentration and elucidate how K + concentration regulates precursor geometry and charge redistribution. Complementary cMD simulations reveal concentrationâdependent changes in interfacial reactant distributions and water structure, with infrared spectral features providing experimental evidence of changes in interfacial reaction chemistry. Together, these results establish an optimal K + concentration window governed by the coupled roles of elementaryâstep kinetics and electrolyte organization in urea electrosynthesis.
- 19 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e4817510
PotassiumâConcentrationâGated CâN Coupling Enables a VolcanoâShaped Selectivity Window for Electrocatalytic Urea Synthesis
Alkali metal cations influence electrochemical interfaces, but their role in regulating urea electrosynthesis remains incompletely understood. Here, we combine constantâpotential ab initio molecular dynamics (AIMD), classical molecular dynamics (cMD), flowâcell electrolysis, and in situ infrared spectroscopy to investigate how cations affect urea formation from CO 2 and nitrate on Cu. Among Li + , Na + , K + , and Cs + , K + affords the lowest calculated barrier for direct *COâ*NO coupling and the highest measured urea Faradaic efficiency. Varying the K + concentration reveals a volcanoâshaped dependence of urea activity and selectivity, with a maximum at a partial current density of 13.62 mA cm â2 and Faradaic efficiency of 24.50% near 1.20 M K + . AIMD calculations identify a minimum coupling barrier at an intermediate nominal K + concentration and elucidate how K + concentration regulates precursor geometry and charge redistribution. Complementary cMD simulations reveal concentrationâdependent changes in interfacial reactant distributions and water structure, with infrared spectral features providing experimental evidence of changes in interfacial reaction chemistry. Together, these results establish an optimal K + concentration window governed by the coupled roles of elementaryâstep kinetics and electrolyte organization in urea electrosynthesis.
- 19 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e4817510
PotassiumâConcentrationâGated CâN Coupling Enables a VolcanoâShaped Selectivity Window for Electrocatalytic Urea Synthesis
Alkali metal cations influence electrochemical interfaces, but their role in regulating urea electrosynthesis remains incompletely understood. Here, we combine constantâpotential ab initio molecular dynamics (AIMD), classical molecular dynamics (cMD), flowâcell electrolysis, and in situ infrared spectroscopy to investigate how cations affect urea formation from CO 2 and nitrate on Cu. Among Li + , Na + , K + , and Cs + , K + affords the lowest calculated barrier for direct *COâ*NO coupling and the highest measured urea Faradaic efficiency. Varying the K + concentration reveals a volcanoâshaped dependence of urea activity and selectivity, with a maximum at a partial current density of 13.62 mA cm â2 and Faradaic efficiency of 24.50% near 1.20 M K + . AIMD calculations identify a minimum coupling barrier at an intermediate nominal K + concentration and elucidate how K + concentration regulates precursor geometry and charge redistribution. Complementary cMD simulations reveal concentrationâdependent changes in interfacial reactant distributions and water structure, with infrared spectral features providing experimental evidence of changes in interfacial reaction chemistry. Together, these results establish an optimal K + concentration window governed by the coupled roles of elementaryâstep kinetics and electrolyte organization in urea electrosynthesis.
- 25 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148  (39) , 42432-42444
Energy-Positive Thiosulfate Production Enabled by Coupling Waste Sulfide Oxidation with Oxygen Reduction
Sulfide-rich waste streams are commonly treated as among the most common environmental liabilities, yet they also represent an abundant sulfur-derived chemical resource if energy-efficient upcycling processes can be developed. Electrochemical sulfide oxidation offers a promising route for sulfur recovery, but conventional systems are typically energy-intensive and produce low-value products. Here we develop a galvanic electrochemical-chemical cascade strategy that couples the sulfide oxidation reaction (SOR) with the two-electron oxygen reduction reaction (ORR), enabling sulfide valorization with net positive electrical energy output. Specifically, a Ce-modified Cu2S anode is designed to enhance both SOR activity and selectivity. Ce incorporation electronically modulates the CuâS framework, providing a favorable intrinsic pathway for deeper sulfide oxidation and sulfur-chain propagation, while the resulting polysulfide distribution is further governed by the electrochemical reaction conditions. The optimized CeâCu2S/NF electrode achieves 100 mA cmâ2 at 0.28 V versus the reversible hydrogen electrode and maintains stable SOR operation for over 110 h. At the cathode, graphitized carbon nanotubes selectively generate H2O2. Through membrane engineering and a relay-type cyclic process, polysulfide intermediates and H2O2 are coupled in a dosage-controlled manner to produce Na2S2O3·5H2O with a sulfide-to-thiosulfate conversion yield exceeding 60% and a purity of approximately 80%. Importantly, the integrated flow cell simultaneously generates electricity with a peak power density of approximately 4 mW cmâ2. Preliminary techno-economic analysis further indicates that ORR coupling reverses the electricity term from a cost penalty to an energy credit. This work demonstrates an energy-positive approach for sulfide waste valorization to value-added thiosulfate.
- 25 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148  (39) , 42432-42444
Energy-Positive Thiosulfate Production Enabled by Coupling Waste Sulfide Oxidation with Oxygen Reduction
Sulfide-rich waste streams are commonly treated as among the most common environmental liabilities, yet they also represent an abundant sulfur-derived chemical resource if energy-efficient upcycling processes can be developed. Electrochemical sulfide oxidation offers a promising route for sulfur recovery, but conventional systems are typically energy-intensive and produce low-value products. Here we develop a galvanic electrochemical-chemical cascade strategy that couples the sulfide oxidation reaction (SOR) with the two-electron oxygen reduction reaction (ORR), enabling sulfide valorization with net positive electrical energy output. Specifically, a Ce-modified Cu2S anode is designed to enhance both SOR activity and selectivity. Ce incorporation electronically modulates the CuâS framework, providing a favorable intrinsic pathway for deeper sulfide oxidation and sulfur-chain propagation, while the resulting polysulfide distribution is further governed by the electrochemical reaction conditions. The optimized CeâCu2S/NF electrode achieves 100 mA cmâ2 at 0.28 V versus the reversible hydrogen electrode and maintains stable SOR operation for over 110 h. At the cathode, graphitized carbon nanotubes selectively generate H2O2. Through membrane engineering and a relay-type cyclic process, polysulfide intermediates and H2O2 are coupled in a dosage-controlled manner to produce Na2S2O3·5H2O with a sulfide-to-thiosulfate conversion yield exceeding 60% and a purity of approximately 80%. Importantly, the integrated flow cell simultaneously generates electricity with a peak power density of approximately 4 mW cmâ2. Preliminary techno-economic analysis further indicates that ORR coupling reverses the electricity term from a cost penalty to an energy credit. This work demonstrates an energy-positive approach for sulfide waste valorization to value-added thiosulfate.
- Open Access
- 5 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17  (1)
Interfacial engineering strategies and sustainability assessment for direct electrolysis of dilute CO2 streams
- 5 September 2026
- Published by Springer Nature in Nature Communications
- Vol. 17  (1)
Open AccessInterfacial engineering strategies and sustainability assessment for direct electrolysis of dilute CO2 streams
- 1 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148  (31) , 33263-33273
Selective Partial Oxidation of Methyl Groups by Electrochemically Generated Ceric Ions
Activation of saturated CâH bonds, particularly the partial oxidation of methyl groups, remains a major challenge in modern catalysis due to their high bond dissociation energies and low polarity, and it currently relies heavily on costly catalysts, oxidants, and harsh conditions. In this work, we report a sustainable strategy for the selective partial oxidation of methyl groups using electrochemically generated ceric ions (Ce4+). Using toluene as a model system, we construct a Pickering emulsion stabilized by hydrophobized SiO2 microspheres, which markedly increases the interfacial area between the organic toluene phase and the aqueous Ce4+ phase. As a result, the system achieves a high benzaldehyde selectivity (âŒ80%) with a production rate of âŒ10 mM hâ1, nearly a 2-fold enhancement compared with a nonemulsified biphasic system. The reduced Ce3+ species is efficiently regenerated via electrochemical oxidation with a high electron utilization efficiency exceeding 95%, enabling a closed-loop oxidationâregeneration cycle under mild conditions. We also demonstrate that the solid emulsifier can be readily recovered and reused for ten cycles without noticeable performance degradation. Moreover, we extend this strategy to a broad range of aromatic and aliphatic methyl-containing substrates, demonstrating its broad applicability. When powered by renewable electricity, the process provides a green and cost-effective alternative to conventional methyl oxidation routes.
- 1 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148  (31) , 33263-33273
Selective Partial Oxidation of Methyl Groups by Electrochemically Generated Ceric Ions
Activation of saturated CâH bonds, particularly the partial oxidation of methyl groups, remains a major challenge in modern catalysis due to their high bond dissociation energies and low polarity, and it currently relies heavily on costly catalysts, oxidants, and harsh conditions. In this work, we report a sustainable strategy for the selective partial oxidation of methyl groups using electrochemically generated ceric ions (Ce4+). Using toluene as a model system, we construct a Pickering emulsion stabilized by hydrophobized SiO2 microspheres, which markedly increases the interfacial area between the organic toluene phase and the aqueous Ce4+ phase. As a result, the system achieves a high benzaldehyde selectivity (âŒ80%) with a production rate of âŒ10 mM hâ1, nearly a 2-fold enhancement compared with a nonemulsified biphasic system. The reduced Ce3+ species is efficiently regenerated via electrochemical oxidation with a high electron utilization efficiency exceeding 95%, enabling a closed-loop oxidationâregeneration cycle under mild conditions. We also demonstrate that the solid emulsifier can be readily recovered and reused for ten cycles without noticeable performance degradation. Moreover, we extend this strategy to a broad range of aromatic and aliphatic methyl-containing substrates, demonstrating its broad applicability. When powered by renewable electricity, the process provides a green and cost-effective alternative to conventional methyl oxidation routes.
- Open Access
- 18 July 2026
- Published by Wiley in Chemistry â A European Journal
- Vol. 32  (39) , e71433
Switching CO 2 Reduction Selectivity on Cu via Organic Cation Regulation of the Electric Double Layer
Electrochemical CO 2 reduction (CO 2 R) offers a promising route to mitigate the pressing carbon emissions and facilitate renewable energy storage. Here, we report a facile electrolyte engineering strategy to modulate the electrical double layer (EDL) at the electrode/electrolyte interface, steering CO 2 R toward selective formate production on Cu. By introducing cationic surfactants (Dodecyltrimethylammonium bromide, DTAB) into the electrolyte, we achieve an 82% selectivity for formate on a Cuâbased foam electrode at â0.9 V versus RHE. Through detailed kinetic analysis and in situ spectroscopy, we attribute this enhancement to the organic cation DTA + . Specifically, DTA + reduces the interfacial chargeâtransfer resistance for CO 2 R, promotes the adsorption and stabilization of formate intermediates, and disrupts the hydrogenbond network by increasing the fraction of free interfacial water. We further demonstrate the practical relevance of this approach in a zeroâgap cell and achieve a formate selectivity of 88% at a current density of 300 mA cm â2 , with stable operation for 120 h at 100 mA cm â2 . This organicâcation regulation strategy offers a feasible route to tune interfacial chargeâtransfer dynamics and intermediate adsorption, thereby enhancing CO 2 R reactivity toward a single product.
- 18 July 2026
- Published by Wiley in Chemistry â A European Journal
- Vol. 32  (39) , e71433
Open AccessSwitching CO 2 Reduction Selectivity on Cu via Organic Cation Regulation of the Electric Double Layer
Electrochemical CO 2 reduction (CO 2 R) offers a promising route to mitigate the pressing carbon emissions and facilitate renewable energy storage. Here, we report a facile electrolyte engineering strategy to modulate the electrical double layer (EDL) at the electrode/electrolyte interface, steering CO 2 R toward selective formate production on Cu. By introducing cationic surfactants (Dodecyltrimethylammonium bromide, DTAB) into the electrolyte, we achieve an 82% selectivity for formate on a Cuâbased foam electrode at â0.9 V versus RHE. Through detailed kinetic analysis and in situ spectroscopy, we attribute this enhancement to the organic cation DTA + . Specifically, DTA + reduces the interfacial chargeâtransfer resistance for CO 2 R, promotes the adsorption and stabilization of formate intermediates, and disrupts the hydrogenbond network by increasing the fraction of free interfacial water. We further demonstrate the practical relevance of this approach in a zeroâgap cell and achieve a formate selectivity of 88% at a current density of 300 mA cm â2 , with stable operation for 120 h at 100 mA cm â2 . This organicâcation regulation strategy offers a feasible route to tune interfacial chargeâtransfer dynamics and intermediate adsorption, thereby enhancing CO 2 R reactivity toward a single product.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01  (41) , 2079
(Invited) Electrochemical Conversion of CO2 into Fuels and Chemicals
Electrochemical CO2 reduction (CO2R) offers exciting opportunities in turning the waste carbon into value-added chemicals/fuels. To data, Cu-based materials are the only known catalysts that exhibit appreciable activity and Faradaic efficiencies (FE) in producing C2+ products during CO2R. Despite their potential, the unsatisfactory performance of Cu-catalysts under practical relevant conditions has hindered the practical implementation of this technology. By carefully analyzing recent state-of-the-art CO2R data, we found that the electrode potential plays a critical role in maintaining the stability of the reaction layer during CO2R, particularly in preventing electrode flooding. Specifically, we observed that most of the kinetic curves enter the mixed control region at around > 0.75 V, and then quickly transition to the CO2 mass transport-limited region, regardless of the type of gas diffusion electrode used or the current density achieved. This result suggests that flooding occurring at the reaction layer is likely associated with the applied potential. The reaction layer flooding not only compromises CO2R selectivity but also leads to substantially increased concentration overpotential, resulting in low energy efficiency. In this work, we demonstrate that an intrinsically more active catalyst that can afford a sufficient CO2R current with a small potential before entering the mixed-controlled region, one can anticipate significantly enhanced CO2R stability and improved energy efficiency at high current densities. For instance, we developed a CuGa bimetallic catalyst with notably reduced activation energy for multi-carbon product formation. The low activation overpotential allows us to achieve practical relevant current densities for CO2 reduction at low overpotentials, ensuring the stability of the catalyst layer and minimizing concentration overpotential. As a result, the optimized CuGa catalyst attains over 50% cathodic energy efficiency for multi-carbon production at a high current density exceeding. Building on the success of converting CO2 into C2H4, we also developed a system capable of further converting the CO2-derived C2H4 into ethylene glycol, another essential commodity chemical. Overall, the correlation between the electrode potential and the stability of the reaction interface, along with the strategy proposed in this study, opens a pathway for the energy-efficient electrosynthesis of C2+ products from CO2.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01  (41) , 2079
(Invited) Electrochemical Conversion of CO2 into Fuels and Chemicals
Electrochemical CO2 reduction (CO2R) offers exciting opportunities in turning the waste carbon into value-added chemicals/fuels. To data, Cu-based materials are the only known catalysts that exhibit appreciable activity and Faradaic efficiencies (FE) in producing C2+ products during CO2R. Despite their potential, the unsatisfactory performance of Cu-catalysts under practical relevant conditions has hindered the practical implementation of this technology. By carefully analyzing recent state-of-the-art CO2R data, we found that the electrode potential plays a critical role in maintaining the stability of the reaction layer during CO2R, particularly in preventing electrode flooding. Specifically, we observed that most of the kinetic curves enter the mixed control region at around > 0.75 V, and then quickly transition to the CO2 mass transport-limited region, regardless of the type of gas diffusion electrode used or the current density achieved. This result suggests that flooding occurring at the reaction layer is likely associated with the applied potential. The reaction layer flooding not only compromises CO2R selectivity but also leads to substantially increased concentration overpotential, resulting in low energy efficiency. In this work, we demonstrate that an intrinsically more active catalyst that can afford a sufficient CO2R current with a small potential before entering the mixed-controlled region, one can anticipate significantly enhanced CO2R stability and improved energy efficiency at high current densities. For instance, we developed a CuGa bimetallic catalyst with notably reduced activation energy for multi-carbon product formation. The low activation overpotential allows us to achieve practical relevant current densities for CO2 reduction at low overpotentials, ensuring the stability of the catalyst layer and minimizing concentration overpotential. As a result, the optimized CuGa catalyst attains over 50% cathodic energy efficiency for multi-carbon production at a high current density exceeding. Building on the success of converting CO2 into C2H4, we also developed a system capable of further converting the CO2-derived C2H4 into ethylene glycol, another essential commodity chemical. Overall, the correlation between the electrode potential and the stability of the reaction interface, along with the strategy proposed in this study, opens a pathway for the energy-efficient electrosynthesis of C2+ products from CO2.
- 30 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138  (36) , e1392489
CrossâInterface QuasiâTandem Catalysis Over Amorphous OxideâMetal Junctions Steers CO 2 Electroreduction Toward C 3 Products
The selective electroreduction of CO 2 to n âpropanol is fundamentally constrained by sluggish C 1 âC 2 coupling and the instability of key oxygenated intermediates. Here, we propose a quasiâtandem catalytic strategy enabled by defectârich amorphous ZrO 2 , where the amorphous oxideâmetal interfacial environment promotes *CO generation, stabilization of oxygenated C 2 intermediates (*OCCOH), and subsequent CâC coupling toward n âpropanol formation. The resulting catalyst, composed of amorphous ZrO 2 , Cu, and Ag, delivers a Faradaic efficiency of 23.2% ± 1.6% and a partial current density of 50.6 mA cm â2 for n âpropanol, representing more than 2.5â and 3.5âfold enhancements, respectively, compared to its crystalline ZrO 2 analogue. Density functional theory (DFT) calculations reveal that the amorphous ZrO 2 âCu interface, not only enhances the formation of *COH, but also significantly lowers the energy barriers for *COâCOH coupling and *COâ*OCCOH coupling toward n âpropanol generation. These findings establish amorphous oxideâmetal interfacial engineering as an effective strategy for quasiâtandem catalysis, enabling cooperative multistep CâC coupling pathways toward selective C 3 electrosynthesis from CO 2 .
- 30 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138  (36) , e1392489
CrossâInterface QuasiâTandem Catalysis Over Amorphous OxideâMetal Junctions Steers CO 2 Electroreduction Toward C 3 Products
The selective electroreduction of CO 2 to n âpropanol is fundamentally constrained by sluggish C 1 âC 2 coupling and the instability of key oxygenated intermediates. Here, we propose a quasiâtandem catalytic strategy enabled by defectârich amorphous ZrO 2 , where the amorphous oxideâmetal interfacial environment promotes *CO generation, stabilization of oxygenated C 2 intermediates (*OCCOH), and subsequent CâC coupling toward n âpropanol formation. The resulting catalyst, composed of amorphous ZrO 2 , Cu, and Ag, delivers a Faradaic efficiency of 23.2% ± 1.6% and a partial current density of 50.6 mA cm â2 for n âpropanol, representing more than 2.5â and 3.5âfold enhancements, respectively, compared to its crystalline ZrO 2 analogue. Density functional theory (DFT) calculations reveal that the amorphous ZrO 2 âCu interface, not only enhances the formation of *COH, but also significantly lowers the energy barriers for *COâCOH coupling and *COâ*OCCOH coupling toward n âpropanol generation. These findings establish amorphous oxideâmetal interfacial engineering as an effective strategy for quasiâtandem catalysis, enabling cooperative multistep CâC coupling pathways toward selective C 3 electrosynthesis from CO 2 .
- 30 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65  (36) , e1392489
CrossâInterface QuasiâTandem Catalysis Over Amorphous OxideâMetal Junctions Steers CO 2 Electroreduction Toward C 3 Products
The selective electroreduction of CO 2 to n âpropanol is fundamentally constrained by sluggish C 1 âC 2 coupling and the instability of key oxygenated intermediates. Here, we propose a quasiâtandem catalytic strategy enabled by defectârich amorphous ZrO 2 , where the amorphous oxideâmetal interfacial environment promotes *CO generation, stabilization of oxygenated C 2 intermediates (*OCCOH), and subsequent CâC coupling toward n âpropanol formation. The resulting catalyst, composed of amorphous ZrO 2 , Cu, and Ag, delivers a Faradaic efficiency of 23.2% ± 1.6% and a partial current density of 50.6 mA cm â2 for n âpropanol, representing more than 2.5â and 3.5âfold enhancements, respectively, compared to its crystalline ZrO 2 analogue. Density functional theory (DFT) calculations reveal that the amorphous ZrO 2 âCu interface, not only enhances the formation of *COH, but also significantly lowers the energy barriers for *COâCOH coupling and *COâ*OCCOH coupling toward n âpropanol generation. These findings establish amorphous oxideâmetal interfacial engineering as an effective strategy for quasiâtandem catalysis, enabling cooperative multistep CâC coupling pathways toward selective C 3 electrosynthesis from CO 2 .
- 30 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65  (36) , e1392489
CrossâInterface QuasiâTandem Catalysis Over Amorphous OxideâMetal Junctions Steers CO 2 Electroreduction Toward C 3 Products
The selective electroreduction of CO 2 to n âpropanol is fundamentally constrained by sluggish C 1 âC 2 coupling and the instability of key oxygenated intermediates. Here, we propose a quasiâtandem catalytic strategy enabled by defectârich amorphous ZrO 2 , where the amorphous oxideâmetal interfacial environment promotes *CO generation, stabilization of oxygenated C 2 intermediates (*OCCOH), and subsequent CâC coupling toward n âpropanol formation. The resulting catalyst, composed of amorphous ZrO 2 , Cu, and Ag, delivers a Faradaic efficiency of 23.2% ± 1.6% and a partial current density of 50.6 mA cm â2 for n âpropanol, representing more than 2.5â and 3.5âfold enhancements, respectively, compared to its crystalline ZrO 2 analogue. Density functional theory (DFT) calculations reveal that the amorphous ZrO 2 âCu interface, not only enhances the formation of *COH, but also significantly lowers the energy barriers for *COâCOH coupling and *COâ*OCCOH coupling toward n âpropanol generation. These findings establish amorphous oxideâmetal interfacial engineering as an effective strategy for quasiâtandem catalysis, enabling cooperative multistep CâC coupling pathways toward selective C 3 electrosynthesis from CO 2 .