Takuya Inoue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Takuya Inoue has a total of 145 co-authors. Here are the top co-authors by number of shared publications:
- Susumu Noda
Kyoto University
41 shared publications Susumu Noda
Photonics and Electronics Science and Engineering Center, Kyoto University, Kyoto, Japan
37 shared publications- Menaka De Zoysa
Kyoto University
34 shared publications - Masahiro Yoshida
Kyoto University
31 shared publications Kenji Ishizaki
Kyoto University Institute for Advanced Study, Kyoto, Japan
30 shared publicationsTakashi Asano
Department of Electronic Science and Engineering, Kyoto University, Kyoto 615-8510, Japan
23 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1-10
Fiber-Amplifier-Free High-Extinction-Ratio OOK Transmission Using Directly Modulated Watt-Class PCSELs
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1-10
Fiber-Amplifier-Free High-Extinction-Ratio OOK Transmission Using Directly Modulated Watt-Class PCSELs
- Open Access
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1701510
Lattice-Separation Dependence of Double-Lattice Gallium-Nitride-Based Photonic Crystal Lasers
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1701510
Open AccessLattice-Separation Dependence of Double-Lattice Gallium-Nitride-Based Photonic Crystal Lasers
- Open Access
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 4900307
Development of High-Power PCSEL-Array Module for Metal Additive Manufacturing Applications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 4900307
Open AccessDevelopment of High-Power PCSEL-Array Module for Metal Additive Manufacturing Applications
- Open Access
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1700507
Carrier-Induced Mode Redistribution Enabling Scalable Single-Mode Lasing in Ultra-Large-Area Photonic-Crystal Surface-Emitting Lasers
Photonic-crystal surface-emitting lasers (PCSELs) are attracting attention as next-generation high-power light sources for a variety of applications owing to their capability for coherent lasing oscillation over ultra-large emission areas. To maintain stable single-mode lasing in ultra-large-area PCSELs far above the lasing threshold, it is essential to understand how the oscillation modes evolve in time and space via the interaction between carriers and photons. In this paper, we perform a comprehensive numerical analysis of the lasing characteristics of ultra-large-area (3∼10-mm) PCSELs considering carrier-photon interactions, focusing specifically on the physics that allows single mode oscillation over an ultra-large area even under high current injection. We reveal that, owing to carrier-induced refractive index changes and the resultant weak mode-gap effect, the initial unimodal photon distributions concentrated at the center of the gain region inside large-area PCSELs are spontaneously altered. When lasing oscillation occurs at a band-edge mode with an appropriate band curvature, the photon distribution becomes increasingly uniform as the injection current increases, resembling the distribution of the injection current. Such mode redistribution (or delocalization) suppresses spatial hole burning and is advantageous for maintaining single-mode oscillation even at high current injection. In addition, by tailoring the injection current distribution inside the device, we can flexibly change the emission profile to, for example, Gaussian-like distributions. Our findings provide deeper insight into the lasing characteristics of ultra-large-area single-mode PCSELs, and offer an important guideline for the experimental demonstration of kW-class single mode oscillation in the future.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1700507
Open AccessCarrier-Induced Mode Redistribution Enabling Scalable Single-Mode Lasing in Ultra-Large-Area Photonic-Crystal Surface-Emitting Lasers
Photonic-crystal surface-emitting lasers (PCSELs) are attracting attention as next-generation high-power light sources for a variety of applications owing to their capability for coherent lasing oscillation over ultra-large emission areas. To maintain stable single-mode lasing in ultra-large-area PCSELs far above the lasing threshold, it is essential to understand how the oscillation modes evolve in time and space via the interaction between carriers and photons. In this paper, we perform a comprehensive numerical analysis of the lasing characteristics of ultra-large-area (3∼10-mm) PCSELs considering carrier-photon interactions, focusing specifically on the physics that allows single mode oscillation over an ultra-large area even under high current injection. We reveal that, owing to carrier-induced refractive index changes and the resultant weak mode-gap effect, the initial unimodal photon distributions concentrated at the center of the gain region inside large-area PCSELs are spontaneously altered. When lasing oscillation occurs at a band-edge mode with an appropriate band curvature, the photon distribution becomes increasingly uniform as the injection current increases, resembling the distribution of the injection current. Such mode redistribution (or delocalization) suppresses spatial hole burning and is advantageous for maintaining single-mode oscillation even at high current injection. In addition, by tailoring the injection current distribution inside the device, we can flexibly change the emission profile to, for example, Gaussian-like distributions. Our findings provide deeper insight into the lasing characteristics of ultra-large-area single-mode PCSELs, and offer an important guideline for the experimental demonstration of kW-class single mode oscillation in the future.
- Open Access
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1700608
Three-Dimensional Coupled-Wave Analysis for Photonic-Crystal Surface-Emitting Lasers With External Optical Feedback
Photonic-crystal surface-emitting lasers (PCSELs) enable large-area coherent oscillation by incorporating a photonic crystal resonator, thereby realizing high output power and excel lent beam quality. Advances in photonic-crystal design have led to enhanced functionalities, including beam steering, high-speed modulation, and narrow-linewidth operation. As a promising approach to further extending the functionality of PCSELs, self-injection optical feedback induced by an external reflector, which has been previously reported in conventional semiconductor lasers to achieve linewidth narrowing and expansion of the modulation bandwidth, is considered. In this paper, we develop a numerical method that enables the analysis of PCSELs with external optical feedback, and we conduct a theoretical investigation on its lasing characteristics based on this framework. First, we show that the lasing modes are formed through the coupling between the large area transverse resonant modes inside the photonic crystal and the longitudinal Fabry–Pérot modes introduced by the external reflector, while maintaining single-transverse-mode operation with a narrow divergence angle. We also reveal that single-longitudinal mode operation can be achieved by adjusting the feedback strength and the delay time, where frequency sweep operation can be also realized by controlling the reflection phase. These results suggest that external optical feedback can provide an effective approach for realizing advanced functionality of PCSELs.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (6: Special) , 1700608
Open AccessThree-Dimensional Coupled-Wave Analysis for Photonic-Crystal Surface-Emitting Lasers With External Optical Feedback
Photonic-crystal surface-emitting lasers (PCSELs) enable large-area coherent oscillation by incorporating a photonic crystal resonator, thereby realizing high output power and excel lent beam quality. Advances in photonic-crystal design have led to enhanced functionalities, including beam steering, high-speed modulation, and narrow-linewidth operation. As a promising approach to further extending the functionality of PCSELs, self-injection optical feedback induced by an external reflector, which has been previously reported in conventional semiconductor lasers to achieve linewidth narrowing and expansion of the modulation bandwidth, is considered. In this paper, we develop a numerical method that enables the analysis of PCSELs with external optical feedback, and we conduct a theoretical investigation on its lasing characteristics based on this framework. First, we show that the lasing modes are formed through the coupling between the large area transverse resonant modes inside the photonic crystal and the longitudinal Fabry–Pérot modes introduced by the external reflector, while maintaining single-transverse-mode operation with a narrow divergence angle. We also reveal that single-longitudinal mode operation can be achieved by adjusting the feedback strength and the delay time, where frequency sweep operation can be also realized by controlling the reflection phase. These results suggest that external optical feedback can provide an effective approach for realizing advanced functionality of PCSELs.
- 15 July 2026
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 95 (7)
Generation of High-Peak-Power Optical Pulses from Photonic-Crystal Surface-Emitting Lasers
- 15 July 2026
- Published by Physical Society of Japan in Journal of the Physical Society of Japan
- Vol. 95 (7)
Generation of High-Peak-Power Optical Pulses from Photonic-Crystal Surface-Emitting Lasers
- Open Access
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Radiation Tolerance of Photonic-Crystal Surface-Emitting Lasers for Space Applications
Photonic-crystal surface-emitting lasers (PCSELs) are semiconductor lasers capable of simultaneously achieving high output power and single-mode operation. Because PCSELs can generate light with low size, weight, and power, they are attractive for use in numerous applications including space-based systems. However, the radiation hardness of PCSELs has not been investigated, so it is unclear whether they can withstand the space radiation environment. Specifically, the impact of radiation on the wavelength-scale structure of a photonic-crystal layer and the dependence of its radiation tolerance on the three-dimensional lasing mechanism inherent to PCSELs have not been studied. In the present work, we evaluated the radiation tolerance of a PCSEL, focusing on total dose effects. When irradiated with 21 and 98 MeV protons, the current threshold of the PCSEL increased. Although the increase in the threshold current was slightly larger than that reported for conventional laser diodes, the functionality of the photonic-crystal layer was preserved. Gamma rays emitted from 60Co irradiation caused a slight increase in the resistance of the PCSEL. Calculations based on the experimental results indicated that the degradation of PCSEL characteristics in the expected space environment is sufficiently small.
- 9 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Open AccessRadiation Tolerance of Photonic-Crystal Surface-Emitting Lasers for Space Applications
Photonic-crystal surface-emitting lasers (PCSELs) are semiconductor lasers capable of simultaneously achieving high output power and single-mode operation. Because PCSELs can generate light with low size, weight, and power, they are attractive for use in numerous applications including space-based systems. However, the radiation hardness of PCSELs has not been investigated, so it is unclear whether they can withstand the space radiation environment. Specifically, the impact of radiation on the wavelength-scale structure of a photonic-crystal layer and the dependence of its radiation tolerance on the three-dimensional lasing mechanism inherent to PCSELs have not been studied. In the present work, we evaluated the radiation tolerance of a PCSEL, focusing on total dose effects. When irradiated with 21 and 98 MeV protons, the current threshold of the PCSEL increased. Although the increase in the threshold current was slightly larger than that reported for conventional laser diodes, the functionality of the photonic-crystal layer was preserved. Gamma rays emitted from 60Co irradiation caused a slight increase in the resistance of the PCSEL. Calculations based on the experimental results indicated that the degradation of PCSEL characteristics in the expected space environment is sufficiently small.
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-9
Directly Modulated C-band High-Power Photonic-Crystal Surface-Emitting Lasers for Free-Space Optical Communications
Photonic-crystal surface-emitting lasers (PCSELs) are a new type of semiconductor laser employing two-dimensional photonic crystals, offering high output power, narrow divergence angles, and coherent light generation, making them highly suited for free-space optical (FSO) communications. However, studies in the C-band remain limited despite its industrial importance. Here, we report the direct modulation performance of C-band InP-based PCSELs and demonstrate lens-free FSO communication. Both amplitude modulation (AM) with direct detection and frequency modulation (FM) with coherent detection are investigated to demonstrate the broad applicability of C-band PCSELs. Analysis of the relative intensity noise (RIN) spectra and small-signal frequency responses reveals a relaxation oscillation frequency of 6 GHz and a corresponding intrinsic bandwidth of approximately 9 GHz at output powers of ∼ 350 mW, indicating potential for high-power direct modulation. In FSO experiments, lens-free AM transmission achieves up to 3 Gbaud non-return-to-zero (NRZ) signaling with a link budget exceeding 43 dB. Furthermore, FM/coherent transmission utilizing the frequency change caused by the PCSELs' chirp effect, with heterodyne detection, achieves larger link budgets exceeding 67 dB for 1 Gbaud NRZ. These results highlight the potential of our C-band PCSELs for lens-free, optical-amplifier-free FSO communication in both terrestrial and satellite systems.
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-9
Directly Modulated C-band High-Power Photonic-Crystal Surface-Emitting Lasers for Free-Space Optical Communications
Photonic-crystal surface-emitting lasers (PCSELs) are a new type of semiconductor laser employing two-dimensional photonic crystals, offering high output power, narrow divergence angles, and coherent light generation, making them highly suited for free-space optical (FSO) communications. However, studies in the C-band remain limited despite its industrial importance. Here, we report the direct modulation performance of C-band InP-based PCSELs and demonstrate lens-free FSO communication. Both amplitude modulation (AM) with direct detection and frequency modulation (FM) with coherent detection are investigated to demonstrate the broad applicability of C-band PCSELs. Analysis of the relative intensity noise (RIN) spectra and small-signal frequency responses reveals a relaxation oscillation frequency of 6 GHz and a corresponding intrinsic bandwidth of approximately 9 GHz at output powers of ∼ 350 mW, indicating potential for high-power direct modulation. In FSO experiments, lens-free AM transmission achieves up to 3 Gbaud non-return-to-zero (NRZ) signaling with a link budget exceeding 43 dB. Furthermore, FM/coherent transmission utilizing the frequency change caused by the PCSELs' chirp effect, with heterodyne detection, achieves larger link budgets exceeding 67 dB for 1 Gbaud NRZ. These results highlight the potential of our C-band PCSELs for lens-free, optical-amplifier-free FSO communication in both terrestrial and satellite systems.
- Open Access
- 14 October 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (12) , 1330-1335
Frequency-modulated high-power photonic-crystal surface-emitting lasers for long-distance coherent free-space optical communications
High-power coherent optical transmitters with high-speed controllability are in demand for a number of cutting-edge applications, including intersatellite communications and deep-space optical communications. The conventional transmitters used in these applications require many bulky optical components besides their semiconductor laser sources, such as fibre-optical amplifiers, external phase modulators, optical fibres and beam-collimation lenses, which are obstacles in achieving compact and efficient systems. Here we propose and experimentally demonstrate compact coherent optical transmitters based on frequency-modulated photonic-crystal surface-emitting lasers (PCSELs) towards achieving long-distance free-space optical (FSO) communications. We design two-section PCSELs that incorporate two photonic crystals with slightly different band-edge resonant frequencies, and we realize watt-class frequency modulation with suppressed amplitude modulation via anti-phase current injection into the two sections. Using the above two-section PCSELs as coherent optical transmitters, we demonstrate fibre-amplifier-free FSO communications with Gbps-class bandwidth, even when the laser power is attenuated by >80 dB. Our work opens avenues toward the realization of one-chip coherent optical transmitters whose volume and weight are several orders of magnitude smaller than conventional bulky systems for a wide variety of coherent free-space laser applications.
- 14 October 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (12) , 1330-1335
Open AccessFrequency-modulated high-power photonic-crystal surface-emitting lasers for long-distance coherent free-space optical communications
High-power coherent optical transmitters with high-speed controllability are in demand for a number of cutting-edge applications, including intersatellite communications and deep-space optical communications. The conventional transmitters used in these applications require many bulky optical components besides their semiconductor laser sources, such as fibre-optical amplifiers, external phase modulators, optical fibres and beam-collimation lenses, which are obstacles in achieving compact and efficient systems. Here we propose and experimentally demonstrate compact coherent optical transmitters based on frequency-modulated photonic-crystal surface-emitting lasers (PCSELs) towards achieving long-distance free-space optical (FSO) communications. We design two-section PCSELs that incorporate two photonic crystals with slightly different band-edge resonant frequencies, and we realize watt-class frequency modulation with suppressed amplitude modulation via anti-phase current injection into the two sections. Using the above two-section PCSELs as coherent optical transmitters, we demonstrate fibre-amplifier-free FSO communications with Gbps-class bandwidth, even when the laser power is attenuated by >80 dB. Our work opens avenues toward the realization of one-chip coherent optical transmitters whose volume and weight are several orders of magnitude smaller than conventional bulky systems for a wide variety of coherent free-space laser applications.
- 26 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (20) , 42480-42488
Narrow-linewidth 1.55-µm-wavelength InP-based photonic-crystal surface-emitting lasers with near-diffraction-limited beam quality
We demonstrate 1.55-µm-wavelength InP-based photonic-crystal surface-emitting lasers (PCSELs) featuring narrow spectral linewidth, high output power, and excellent beam quality. PCSELs simultaneously support narrow-linewidth operation and high output power through large-area single-mode lasing in two-dimensional photonic crystals. Their stable single-mode behavior also enables a symmetric, high-quality circular beam. Here, we achieve near-diffraction-limited beam quality, with an M2 factor below 1.1 and divergence angles of approximately 0.6° (1/e2), measured at output powers above 300 mW. Furthermore, we report an intrinsic spectral linewidth of 35 kHz at output powers exceeding 300 mW under continuous-wave operation at 25°C. The linewidth dependence on the inverse of output power follows the ideal behavior predicted by the single-mode laser model. These results indicate that our PCSELs are well-suited for coherent free-space optical (FSO) communication and light detection and ranging (LiDAR) applications, as well as optical fiber communication systems.
- 26 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (20) , 42480-42488
Narrow-linewidth 1.55-µm-wavelength InP-based photonic-crystal surface-emitting lasers with near-diffraction-limited beam quality
We demonstrate 1.55-µm-wavelength InP-based photonic-crystal surface-emitting lasers (PCSELs) featuring narrow spectral linewidth, high output power, and excellent beam quality. PCSELs simultaneously support narrow-linewidth operation and high output power through large-area single-mode lasing in two-dimensional photonic crystals. Their stable single-mode behavior also enables a symmetric, high-quality circular beam. Here, we achieve near-diffraction-limited beam quality, with an M2 factor below 1.1 and divergence angles of approximately 0.6° (1/e2), measured at output powers above 300 mW. Furthermore, we report an intrinsic spectral linewidth of 35 kHz at output powers exceeding 300 mW under continuous-wave operation at 25°C. The linewidth dependence on the inverse of output power follows the ideal behavior predicted by the single-mode laser model. These results indicate that our PCSELs are well-suited for coherent free-space optical (FSO) communication and light detection and ranging (LiDAR) applications, as well as optical fiber communication systems.