ÁSÁlvaro Somolinos

Álvaro Somolinos

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Álvaro Somolinos has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Application of Relational Databases to the Acceleration of Ray Tracing in High Frequency Asymptotic Techniques

    by David Cabornero, Lorena Lozano, Iván González, Álvaro Somolinos, Felipe Cátedra

    A new ray-tracing acceleration technique is presented for electromagnetic simulation problems using the Uniform Theory of Diffraction and meshes of planar facets. The innovation involves using relational databases to accurately store spatial information, enabling spatial indexing through space partitioning with R-trees. This technique effectively reduces the computational cost of several critical phases, including the shadowing test. Additionally, there are multiple advantages to utilizing this technology, such as automated memory and disk management along with a query planner that organizes the instructions automatically. Direct rays, multiple reflections, multiple transmissions, simple diffraction, and combinations of these effects have been implemented in PostgreSQL and its spatial library PostGIS. Compared to traditional techniques that employ Angular Z-Buffer acceleration and store information solely in RAM using a low-level language, this approach decreases memory usage by more than 90% in complex scenarios. It also shows a decrease in execution time by more than half when the scenario is sufficiently complex.


  • Open Access

    Fast Computation by MLFMM-FFT with NURBS in Large Volumetric Dielectric Structures

    by Alejandro Pons, Alvaro Somolinos, Ivan González, Felipe Cátedra

    A refinement for the computation of the rigorous part of the multi-level fast multipole method (MLFMM) of analyzing volumetric objects is presented. A scheme based on the fast Fourier technique (FFT) is proposed with the objective of reducing the computational resources required to accurately analyze large homogeneous and non-homogeneous dielectric volumes. In order to reduce the memory requirements, the storage of the near-field terms of the method of moments (MoM) matrix is performed only for the positions corresponding to a parallelepiped with the size of the level 1 block of the MLFMM, computed with the vacuum permittivity, taking advantage of the Toeplitz symmetry present in regular hexahedral meshes. The FFT avoids applying the near-field MoM matrix in the iterative solution process. The application of this approach results in huge improvements in terms of memory usage, but also a speeds up the iterative solution process because the use of three-dimensional (3D) FFTs is very efficient for computing convolutions when the number of unknowns of the problems becomes very large as happens in volumetric problems. We also propose a new approach for the numerical treatment of the transition of the dielectric permittivity between different dielectrics or between a dielectric and a free space. To validate the computation technique, the radar cross section (RCS) of several dielectric bodies is computed using the classical MLFMM approach and it is compared with the presented FFT-based-MLFMM solution. The results demonstrate that the efficient memory and computation time usage of the proposed approach.


  • Open Access

    Comparison between Specialized Quadrature Rules for Method of Moments with NURBS Modelling Applied to Periodic Multilayer Structures

    by Rafael Florencio, Álvaro Somolinos, Iván González, Felipe Cátedra, Lorena Lozano

    A comparison between Ma-Rokhlin-Wandzura (MRW) and double exponential (DE) quadrature rules for numerical integration of method of moments (MoM) matrix entries with singular behavior is presented for multilayer periodic structures. Non Uniform Rational B-Splines (NURBS) modelling of the layout surfaces is implemented to provide high-order description of the geometry. The comparison is carried out in order to show that quadrature rule is more suitable for MoM matrix computation in terms of sampling, accuracy of computation of MoM matrix, and CPU time consumption. The comparison of CPU time consumption shows that the numerical integration with MRW samples is roughly 15 times faster than that numerical integration using DE samples for results with similar accuracies. These promising results encourage to carry out a comparison with results obtained in previous works where a specialized approach for the specific analysis of split rings geometries was carried out. This previous approach uses spectral MoM version with specific entire domain basis function with edge singularities defined on split ring geometry. Thus, the previous approach provides accurate results with low CPU time consumption to be compared. The comparison shows that CPU time consumption obtained by MRW samples is similar to the CPU time consumption required by the previous work of specific analysis of split rings geometries. The fact that similar CPU time consumptions are obtained by MRW quadrature rules for modelling of general planar geometries and by the specialized approach for split ring geometry provides an assessment for the usage of the MRW quadrature rules and NURBS modelling. This fact provides an efficient tool for analysis of reflectarray elements with general planar layout geometries, which is suitable for reflectarray designs under local periodicity assumption where a huge number of periodic multilayer structures have to be analyzed.


  • Open Access

    Fast Preconditioner Computation for BICGSTAB-FFT Method of Moments with NURBS in Large Multilayer Structures

    by Rafael Florencio, Álvaro Somolinos, Iván González, Felipe Cátedra

    Fast computation of the coefficients of the reduced impedance matrix of the method of moment (MM) is proposed by expanding the basis functions (BFs) in pulses and solving an equivalent periodic problem (EPP) for analyzing large multilayer structures with non-uniform rational basis spline (NURBS) modeling of the embedded layout. These coefficients are required by the computation of sparse approximate inverse (SAI) preconditioner, which leads an efficient iterative version of the MM. This reduced coefficient matrix only considers the near field part of the MM matrix. Discrete functions of small sizes are required to implement the pulse expansion and EPP. These discrete functions of small size lead to discrete cyclic convolutions that are computed in a very fast way by fast Fourier transform (FFT)-accelerated matrix–vector multiplication. Results obtained using a conventional laptop show an analysis of very large multilayer structures with resonant layouts, as whole reflectarrays of electrical size 40 times the vacuum wavelengths, where the iterative MM with a SAI preconditioner can be 22.7 times faster than the pure iterative MM without any preconditioner.


  • Open Access

    EM Modelling of Monostatic RCS for Different Complex Targets in the Near-Field Range: Experimental Evaluation for Traffic Applications

    by Pablo Sanchez-Olivares, Lorena Lozano, Álvaro Somolinos, Felipe Cátedra

    An evaluation of monostatic radar cross section (RCS) response in the near-field range was performed for several targets with different and complex topologies. The main objective was to provide and validate an efficient tool based on electromagnetic (EM) simulations to characterize a traffic scenario. Thus, a novel method based on the combination of geometrical theory of diffraction (GTD) and physical optics (PO) was used to estimate RCS, and the results were compared with the method of moments (MoM) methodology. The simulations were experimentally validated using a commercial vehicular frequency-modulated continuous wave (FMCW) radar at 24 GHz. With this simple measurement system, RCS measurements can be made using an easier and cheaper process to obtain RCS response in the near-field range, which is the most usual situation for traffic applications. A reasonable agreement between the measurements and the EM simulations was observed, validating the proposed methodology in order to efficiently characterize the RCS of targets typically found in real traffic scenarios.


  • Open Access

    BICGSTAB-FFT Method of Moments with NURBS for Analysis of Planar Generic Layouts Embedded in Large Multilayer Structures

    by Rafael Florencio, Álvaro Somolinos, Iván González, Felipe Cátedra

    BICGSTAB-FFT method of moment (MM) scheme is proposed to analyze several levels of planar generic layouts embedded in large multilayer structures when the layout geometries are modeled by NURBS surfaces. In this scheme, efficient computation of normalized error defined in iterative bi-conjugate gradient stabilized (BICGSTAB) method for large multilayer structure analysis problems is implemented. The efficient computation is based on pulse expansion with dense equi-spaced mesh of generalized rooftop basis functions (BFs) defined on NURBS surfaces and equivalent periodic problem (EPP) in order to apply fast Fourier transforms (FFT). Moreover, efficient computation of Green’s functions for multilayer structure is implemented for near and far field regions. Experimental and numerical validations of whole printed reflect array antennas of electrical size between 8 and 16 times the vacuum wavelengths are shown. In these validations, CPU time consumptions of the proposed method are obtained with results between few minutes and half an hour using a conventional laptop.


  • Open Access

    Method of Moments Based on Equivalent Periodic Problem and FFT with NURBS Surfaces for Analysis of Multilayer Periodic Structures

    by Rafael Florencio, Álvaro Somolinos, Iván González, Felipe Cátedra

    In this paper, an efficient technique of computation of method of moments (MM) matrix entries for multilayer periodic structures with NURBS surface and Bézier patches modelling is proposed. An approximation in terms of constant pulses of generalized rooftop basis functions (BFs) defined on Bézier patches is proposed. This approximation leads discrete convolutions instead of usual continuous convolution between Green’s functions and BFs obtained by the direct mixed potential integral equation (MPIE) approach. An equivalent periodic problem (EPP) which contains the original problem is proposed to transform the discrete convolutions in discrete cyclic convolutions. The resultant discrete cyclic convolutions are computed by efficiently using the Fast Fourier Transform (FFT) procedure. The performance of the proposed method and direct computation of the MM entries are compared for phases of reflection coefficient. The proposed method is between 9 and 50 times faster than the direct computation for phase errors less than 1 deg. The proposed method exhibits a behaviour of CPU time consumption of O(NbLog10Nb) as the number Nb of BFs increases. This behaviour provides significant CPU time savings with respect to the expected behaviour of O(Nb2) provided by the direct computation of the MM matrix entries.


  • Open Access

    Multi-Beam Circular Polarized Reflectarray on Parabolic Reflector by Variable Rotation Technique

    by Álvaro Somolinos, Rafael Florencio, Iván González, Felipe Cátedra

    Multi-beams antennas are currently being used for direct broadcast satellite, personal communication satellite, military communication satellite, and high-speed internet applications. In this work, a circularly polarized (CP) multi-spot beam satellite parabolic reflectarray antenna is designed to provide six spot beams at 19.7 GHz. For this purpose, an easy technique to compute the required phase shifts to produce two focused beams in specular directions for a CP parabolic reflectarray is proposed. These required phase shifts are added to the reflected fields by the variable rotation of the reflectarray elements printed on the surface of a parabolic antenna which are fed by a dual-CP feed-horn. For this purpose, a reflectarray cell made of a conductive cross embedded in a grounded multilayered substrate is optimized to produce very linear phase-shift and low cross-polarization level. To demonstrate the multibeam capacity, a 1.8-meter offset parabolic reflectarray made of the optimized reflectarray element was designed to generate six focused beams in dual-CP with three dual-CP feed-horns. The six main spots fulfill the typical multi spot satellite requirement with angular separation less than 0.56°, 0.4 dB loss in the gain, and cross-polarization level below 35 dB with respect to the maximum of radiation.


  • Open Access

    Experimental Validation of Generating Two Spaced Beams With Reflectarrays by VRT

    by Alvaro Somolinos, Rafael Florencio, Ivan Gonzalez, Jose A. Encinar, Felipe Catedra

    The concept of generating two spaced beams in dual-CP by variable rotation technique (VRT) is validated for the first time by manufacturing and measuring. A reflectarray demonstrator has been designed, manufactured, and tested to deviate ±10° the beam of a dual-CP multiflared horn at 19.7 GHz. The proposed reflectarray cell for VRT is made of a conductive cross printed on a grounded dielectric. The experimental results show that two adjacent beams in dual-CP maintain the correct directions in the prescribed frequency band (19.2-20.2 GHz). The results are satisfactory and validate the concept for generating two spaced beams in orthogonal CP by VRT with a single feed.


  • Analysis of collision avoidance systems for automobile applications

    by Ivan Gonzalez, Felipe Catedra, Maria-Jesus Algar, Aaron Gonzalez, Alvaro Somolinos, Gustavo Romero, Javier Moreno

    The analysis of collision avoidance systems in real traffic urban scenarios represent a challenge for computational electromanetics due to its multiscale nature. An approach for solving this problem based on a combination of Multi-Level Fast Multipole Method (MLFMM), Characteristic Basis Functions (CBF), Physical Optics (PO) and Geometrical Theory of Diffraction (GTD) is described. Results for several cases are shown.