CYChen Yang

Chen Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chen Yang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:

  • Guo-Ping Gao

    Gansu Provincial Key Laboratory of Wearable Computing, School of Information Science and Engineering Lanzhou University Lanzhou China

    4 shared publications
  • Bin Hu

    Key Laboratory of Brain Health Intelligent Evaluation and Intervention, Ministry of Education, Beijing Institute of Technology, Beijing, China

    3 shared publications
  • Kwok Wa Leung

    Sun Yat-sen University

    3 shared publications
  • Kai Lu

    School of Electronics and Information Technology (School of Microelectronics) and Guangdong Provincial Key Laboratory of Optoelectronic Information Processing Chips and Systems, Sun Yat-Sen University, Guangzhou, China

    2 shared publications
  • Ruifeng Zhang

    Gansu Provincial Key Laboratory of Wearable Computing School of Information Science and Engineering Lanzhou University Lanzhou 730000 People's Republic of China

    2 shared publications
  • Bin Hu

    Gansu Provincial Key Laboratory of Wearable Computing School of Information Science and Engineering Lanzhou University Lanzhou 730000 People's Republic of China

    1 shared publication

Latest Publications

  • A Compact Antenna Module With Three Coplanar Polarizations for Multi-Input-Multi-Output Applications

    by Chen Yang, Kwok Wa Leung, Kai Lu

    This paper presents a compact dielectric-loaded antenna (DLA) module with three coplanar polarizations for the first time. It has three monopole radiators spaced by 0.14λ 0 with high isolations of around 20 dB for multi-input-multi-output (MIMO) applications. The three radiators are surrounded by a cylindrical dielectric block with a diameter of 0.30λ 0 only. The loaded dielectric block helps to reduce the mutual coupling by providing dielectric-air boundaries. In addition, it modifies the E-field distribution to generate three coplanar polarizations. As can be shown by the envelope correlation coefficients (ECCs) based on radiation patterns, the proposed module can provide three independent channels for MIMO applications. Compared with an ideal single-input-single-output (SISO) system, our module can reach an ergodic channel capacity of around 282%. Based on the DLA module, a compact high-gain hexagonal antenna array (HAA) with coplanar tri-polarization is proposed for long-distance MIMO applications. Dielectric-filled bow-tie-shaped slots are employed between DLA modules to reduce the inter-module mutual coupling. Moreover, a hexagonal artificial magnetic (AMC) structure is arranged on the backside to reduce the backside lobes. As a result, a measured realized gain of more than 12 dBi is obtained for each polarization. According to measured ECC levels, a 3×3 MIMO system with our HAA can provide an ergodic channel capacity of around 244% of an ideal SISO system.


  • 3-D-Printed Wideband Circularly Polarized MIMO Dielectric Resonator Antenna

    by Chen Yang, Kwok Wa Leung

    A 3-D-printed wideband circularly polarized (CP) multiple-input–multiple-output (MIMO) antenna is proposed. This antenna consists of two CP dielectric resonator antennas (DRAs) which are covered by a dielectric decoupler. With this decoupler, the center-to-center distance between the two DRAs can be made as small as 0.33λ 0 with a high isolation, where λ 0 is the operating wavelength in air. To verify the simulation, a prototype operating in X-band was designed, fabricated, and measured. Its measured -10-dB impedance bandwidth is 21.7% (8.88–11.04 GHz), within which the axial-ratio bandwidth and mutual coupling are less than 3 dB and -21.4 dB, respectively. The impedance and AR have a wide overlapping bandwidth of 21.7%.


  • Dielectric Decoupler for Compact MIMO Antenna Systems

    by Chen Yang, Kai Lu, Kwok Wa Leung

    A novel decoupling method based on the superposition principle is proposed for compact multi-input–multi-output (MIMO) antenna systems in this work. A dielectric block is introduced to encompass all radiators in a compact MIMO system and works as a decoupler when the block is appropriately designed. Owing to the presence of dielectric–air boundary (DAB) introduced by the dielectric block, scattered paths show up for electromagnetic (EM) waves inside the block. For any two encompassed primary radiators, mutual couplings via the direct and scattered paths are superposed one on another. Because the scatted wave paths can be controlled by changing the shape and dimension of the DAB, mutual coupling between two encompassed primary radiators can be minimized with a properly designed DAB. To illustrate this decoupling principle, the electric field distribution of a basic Hertzian dipole wrapped in a dielectric decoupler is first studied. Results show that this method can generate several field valleys inside the dielectric block and can lead to good isolation when a second radiator is placed at a valley. A dual-port antenna wrapped in a dielectric decoupler is then proposed for demonstration. By optimizing the DAB shape, this antenna can realize a measured 20 dB isolation bandwidth of 12.6%, covering the whole 3.3–3.7 GHz 5G frequency range 1 (FR1) band. Furthermore, a quad-port decoupled antenna is studied to show the generality of the proposed decoupling method. Using a hollow rectangular dielectric block, isolations among four ports of more than 21.5 dB can be obtained in the 3.3–3.7 GHz band with a 20-dB isolation bandwidth of 18%. The envelope correlation coefficients (ECCs) and calculated ergodic channel capacity (CC) results show that the proposed compact dual-port and quad-port antennas are competitive for MIMO applications.


  • Wide Impedance-Bandwidth and Gain-Bandwidth Terahertz On-Chip Antenna With Chip-Integrated Dielectric Resonator

    by Shangcheng Kong, Kam Man Shum, Chen Yang, Liang Gao, Chi Hou Chan

    A wide impedance-bandwidth and gain-bandwidth terahertz (THz) on-chip antenna (OCA) with chip-integrated dielectric resonator (CIDR) backed by a ground plane is proposed in this article. The antenna uses the inherent silicon substrate in complementary metal-oxide-semiconductor (CMOS) technologies as a rectangular dielectric resonator (DR), that is, the CIDR. This CIDR can be seen as a standard dielectric resonator antenna (DRA) or a magnetic wall cavity with in-phase reflected waves from the ground. A versatile comb-shaped dipole antenna is designed above the silicon CIDR, functioning both as a feeder for the DRA and an independent radiator. With the proper design of the CIDR and the dipole, multiple higher order DR modes and the cavity mode are simultaneously excited, namely, hybrid DR-cavity modes. The hybrid modes greatly expand the bandwidth and improve the gain. Simulations show that the -10 dB impedance bandwidth and 3 dB gain bandwidth are 50% and 34.5%, respectively, while a peak gain of 6.5 dBi is achieved at 305 GHz. For validation, the antenna is fabricated using the Taiwan Semiconductor Manufacturing (TSMC) 65 nm CMOS technology and tested by dedicated THz measurement setups. The fabricated sample shows a peak gain of 8.6 dBi and a maximum radiation efficiency of 44% at 295 GHz. Meanwhile, low cross-polarization levels and stable patterns are also observed. The features of wide bandwidth, high gain, and low profile make the antenna a good candidate in fully integrated THz transceiver systems. To the best of the authors' knowledge, this is the widest fully integrated OCA working at THz frequencies.


  • Open Access

    Microstrip monopole antenna with a novel UC‐EBG for 2.4 GHz WBAN applications

    by Guoping Gao, Ruifeng Zhang, Chen Yang, Huijia Meng, Wenfei Geng, Bin Hu

    A microstrip monopole antenna backed with a novel uniplanar compact electromagnetic bandgap (UC‐EBG) structure for 2.4 GHz wireless body area network applications is proposed here. The proposed antenna has a size reduction of 50% when the number of EBG array is optimised from 3 × 4 to 2× 3, while the radiation performance is almost invariable at the same time. The operating frequency band under different conditions has the capability of covering the 2.4–2.4835 GHz industrial, scientific, and medical band. Due to the addition of 2×3 UC‐EBG on the back, the radiation patterns become unidirectional, and the measured average gain increases from 2.1 to 5.6 dB. Meanwhile, the cross‐polarisation of the monopole antenna can be suppressed prominently by the EBG array. The simulated specific absorption rate values are 0.0536 W/kg under 1 g standard and 0.0296 W/kg under 10 g standard, which are far below the limitation of USA and Europe. These results can manifest the reliable wearable performance of the proposed antenna.


  • Quasi‐Cassegrain metasurface antenna with shielded vias and wide bandwidth

    by Guoping Gao, Chen Yang, Bin Hu, Shaofei Wang, Ruifeng Zhang

    A novel quasi‐Cassegrain metasurfaces (MS) antenna with wide bandwidth operating in 8 GHz band is proposed. Initially, the article demonstrates a complete set of working principles and design approach for the proposed antenna. Then, this antenna is optimised, manufactured, and measured. The profile of the antenna is further reduced by using the reflect‐array based on MS, and the gain is improved by loading shielded vias. Note that the second resonant frequency generated from sub‐reflector is utilised to extend the bandwidth. The measured results indicate that the antenna achieves the peak gain of 15.9 dBi, impedance bandwidth of 1.07 GHz, and half power beam width of 26° in E plane and 21.5° in H plane. It has a low profile of 26.5 mm (0.71 λ 0 ) and occupies an area of 120 mm × 120 mm (3.20 λ 0 × 3.20 λ 0 ). The article not only completes the antenna operating in 8 GHz band but also provides a reference for the design of the proposed quasi‐Cassegrain antenna in microwave band.

  • A Wide-Bandwidth Wearable All-Textile PIFA With Dual Resonance Modes for 5 GHz WLAN Applications

    by Guo-Ping Gao, Chen Yang, Bin Hu, Rui-Feng Zhang, Shao-Fei Wang

    A novel wide bandwidth wearable all-textile planar inverted-F antenna (PIFA), designed for 5-GHz wireless local area network (WLAN) applications (5.15-5.825 GHz), is proposed in this communication. By using hollow copper rivets, nylon conductive fabric, and wool felt, a PIFA with a compact structure and flexible fabrication is realized. Additional wide bandwidth is achieved by adding a pair of shorting pins and etching a slot to manipulate the dual resonances of the TM0,1/2 and TM0,3/2 modes. The variation in the electric field distributions qualitatively explains the effects of the shorting pins and the slot for these two modes. As a result, the antenna has good performance with a measured fractional bandwidth of 18.0%, a peak gain of 5.9 dBi, and an average efficiency up to 74.1%. In addition, stable performance on a human body is obtained such that the operating bandwidth on different human tissues and under different bending conditions can cover the design band. The calculated specific absorption rate (SAR) values are 0.9307 W/kg and 0.4016 W/kg under 1 g average and 10 g average, respectively. These properties make the proposed antenna suitable for wearable systems.


  • A Wearable PIFA With an All-Textile Metasurface for 5 GHz WBAN Applications

    by Guo-Ping Gao, Chen Yang, Bin Hu, Rui-Feng Zhang, Shao-Fei Wang

    In this letter, a wearable all-textile metasurface antenna (MSA) for 5-GHz wireless body area network (WBAN) applications is proposed. All the components of the proposed MSA are made of the comfort textile materials. A metasurface with high permittivity values is placed right above a wide-bandwidth planar inverted-F antenna (PIFA) to realize size miniaturization and gain enhancement. The proposed MSA has a profile of 4 mm (0.07λ0) and occupies an area of 42 mm × 28 mm (0.77λ0 ×3 0.51λ0). Moreover, this antenna realizes a measured peak gain of 6.70 dBi, an average radiation efficiency of 77%, and an operating band from 4.96 GHz to 5.90 GHz that covers the 5-GHz WBAN band. In addition, the on-body studies show that the MSA is suitable for wearable applications.