Marina Raineri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marina Raineri has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Corrado Guarino Lo Bianco
Dipartimento di Ingegneria e Architettura, University of Parma, Parma, Italy
7 shared publications Simone Perri
3 shared publicationsAndrea Tagliavini
University of Parma,Dip. di Ingegneria e Architettura,Italy
1 shared publicationMarco Locatelli
Dip. di Ingegneria dell'Informazione, University of Parma, Italy
1 shared publication- Riccardo Monica
Department of Engineering for Industrial Systems and Technologies, University of Parma, Parma, Italy
1 shared publication
Latest Publications
- 4 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Generation of an adaptive ascending step for a lower limb exoskeleton
Assistive exoskeletons are medical devices typically designed to perform repetitive movements. Recent researches highlighted the necessity to endow such devices with perceptual capabilities, in order to perform adaptive movements. This would allow using exoskeletons in everyday activities such as, for example, the ascent of a staircase. This work addresses some of the typical problems related to the motion along a staircase of a lower limb exoskeleton. In particular, the focus will be posed on problems such as the identification of the staircase and the relative position between them and the exoskeleton, the motion planning for the ascending foot and its adaptation to the changes of the torso orientation. The proposed strategies have been experimentally verified and the results are documented through videos.
- 4 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Generation of an adaptive ascending step for a lower limb exoskeleton
Assistive exoskeletons are medical devices typically designed to perform repetitive movements. Recent researches highlighted the necessity to endow such devices with perceptual capabilities, in order to perform adaptive movements. This would allow using exoskeletons in everyday activities such as, for example, the ascent of a staircase. This work addresses some of the typical problems related to the motion along a staircase of a lower limb exoskeleton. In particular, the focus will be posed on problems such as the identification of the staircase and the relative position between them and the exoskeleton, the motion planning for the ascending foot and its adaptation to the changes of the torso orientation. The proposed strategies have been experimentally verified and the results are documented through videos.
- Open Access
- 11 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 3 (1) , 220-229
A Real-Time 3D Reconstruction of Staircases for Rehabilitative Exoskeletons
In medical contexts, the use of assistive exoskeletons for the rehabilitation of people with impaired mobility represents a common practice. Recent advances suggest that, soon, such mechatronic systems will also be used to assist people in their everyday life. In order to reach such target, exoskeletons must become able to perceive the environment. To this purpose, a system for the parametric identification of a staircase is proposed in this paper. More precisely, given a staircase of unknown geometry, the system identifies its 3D shape. Furthermore, it also estimates the reciprocal orientation and distance between the exoskeleton and the staircase. Differently from other approaches, this result is achieved by means of low cost devices: an inertial measurement unit, two ranging sensors, and an Arm-Cortex processor. Starting from the ranging sensors acquisitions, the staircase model is identified in real time, during the execution of a step. The proposed procedure is based on an extended recursive total least squares strategy, in order to fully exploit the computational capabilities of the Arm processor, and it is characterized by execution times smaller than 10-3 s. The estimation algorithm has been tested on an actual exoskeleton and the resulting experimental outcomes are compared with the results obtained through alternative methods.
- 11 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 3 (1) , 220-229
Open AccessA Real-Time 3D Reconstruction of Staircases for Rehabilitative Exoskeletons
In medical contexts, the use of assistive exoskeletons for the rehabilitation of people with impaired mobility represents a common practice. Recent advances suggest that, soon, such mechatronic systems will also be used to assist people in their everyday life. In order to reach such target, exoskeletons must become able to perceive the environment. To this purpose, a system for the parametric identification of a staircase is proposed in this paper. More precisely, given a staircase of unknown geometry, the system identifies its 3D shape. Furthermore, it also estimates the reciprocal orientation and distance between the exoskeleton and the staircase. Differently from other approaches, this result is achieved by means of low cost devices: an inertial measurement unit, two ranging sensors, and an Arm-Cortex processor. Starting from the ranging sensors acquisitions, the staircase model is identified in real time, during the execution of a step. The proposed procedure is based on an extended recursive total least squares strategy, in order to fully exploit the computational capabilities of the Arm processor, and it is characterized by execution times smaller than 10-3 s. The estimation algorithm has been tested on an actual exoskeleton and the resulting experimental outcomes are compared with the results obtained through alternative methods.
- Open Access
- 3 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (4) , 1611-1620
An Experimentally Validated Technique for the Real-Time Management of Wrist Singularities in Nonredundant Anthropomorphic Manipulators
The automatic management of kinematic singularities that are typical for trajectories planned in the operational space is arousing a renewed interest among the scientific community because the most recent strategies make it possible their real-time management. The approach described in this paper allows executing trajectories in the operational space which pass through wrist singularities. It introduces several novelties with respect to known alternative strategies. First, it is conceived for trajectories which are planned on-the-fly. Second, singularities are avoided by changing slightly the tool frame orientation while strictly preserving both the assigned Cartesian path and time law. Finally, the approach is effective also for manipulators moving at standard operative speeds, and it explicitly handles given limits on joint velocities and accelerations. In this paper, an approach proposed in early works is revised in order to make it ready for an industrial implementation. In particular, a procedural method is proposed for the tuning of the algorithm so as to make it more deterministic and to increase the success rates. Furthermore, the singularity avoidance problem is theoretically analyzed in order to devise a necessary condition for the existence of a solution. Results are experimentally validated through an anthropomorphic industrial manipulator.
- 3 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (4) , 1611-1620
Open AccessAn Experimentally Validated Technique for the Real-Time Management of Wrist Singularities in Nonredundant Anthropomorphic Manipulators
The automatic management of kinematic singularities that are typical for trajectories planned in the operational space is arousing a renewed interest among the scientific community because the most recent strategies make it possible their real-time management. The approach described in this paper allows executing trajectories in the operational space which pass through wrist singularities. It introduces several novelties with respect to known alternative strategies. First, it is conceived for trajectories which are planned on-the-fly. Second, singularities are avoided by changing slightly the tool frame orientation while strictly preserving both the assigned Cartesian path and time law. Finally, the approach is effective also for manipulators moving at standard operative speeds, and it explicitly handles given limits on joint velocities and accelerations. In this paper, an approach proposed in early works is revised in order to make it ready for an industrial implementation. In particular, a procedural method is proposed for the tuning of the algorithm so as to make it more deterministic and to increase the success rates. Furthermore, the singularity avoidance problem is theoretically analyzed in order to devise a necessary condition for the existence of a solution. Results are experimentally validated through an anthropomorphic industrial manipulator.
- Open Access
- 1 June 2019
- Published by Elsevier in Robotics and Computer-Integrated Manufacturing
- Vol. 57, 73-85
Safety and efficiency management in LGV operated warehouses
- 1 June 2019
- Published by Elsevier in Robotics and Computer-Integrated Manufacturing
- Vol. 57, 73-85
Open AccessSafety and efficiency management in LGV operated warehouses
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6178-6184
Online velocity planner for Laser Guided Vehicles subject to safety constraints
Laser Guided Vehicles (LGV) are largely used in industrial contexts for the autonomous dispatching of huge loads. LGVs of automated warehouses are driven by supervisory systems which assign their tasks depending on the process demands. The vehicle workspace is partially structured and it is normally shared with several independent agents like other LGVs, or human operated forklifts, or humans which directly interact with the vehicle itself. For efficiency and for safety reasons, LGVs move along pre-defined paths so that, if an unexpected obstacle is detected, they must be promptly stopped so as to avoid impacts. As shown in the paper, the safety problem is normally handled by limiting the plant productivity. This is clearly an improper approach, which can be overcome by considering a novel velocity planning strategy. The one proposed in this paper guarantees high safety standards, thus preserving the physical integrity of human coworkers, by simultaneously improving the plant productivity.
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6178-6184
Online velocity planner for Laser Guided Vehicles subject to safety constraints
Laser Guided Vehicles (LGV) are largely used in industrial contexts for the autonomous dispatching of huge loads. LGVs of automated warehouses are driven by supervisory systems which assign their tasks depending on the process demands. The vehicle workspace is partially structured and it is normally shared with several independent agents like other LGVs, or human operated forklifts, or humans which directly interact with the vehicle itself. For efficiency and for safety reasons, LGVs move along pre-defined paths so that, if an unexpected obstacle is detected, they must be promptly stopped so as to avoid impacts. As shown in the paper, the safety problem is normally handled by limiting the plant productivity. This is clearly an improper approach, which can be overcome by considering a novel velocity planning strategy. The one proposed in this paper guarantees high safety standards, thus preserving the physical integrity of human coworkers, by simultaneously improving the plant productivity.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1302-1309
An automatic system for the avoidance of wrist singularities in anthropomorphic manipulators
The automatic management of kinematic singularities for trajectories planned in the operational space is a topic which is attracting a renewed interest in the scientific community. In fact, the numerical efficiency of the strategies recently proposed makes them suitable to be exploited in industrial contexts. The approach proposed in this paper can be collocated within this framework, since it allows executing trajectories in the operational space which pass through wrist singularities. It introduces several novelties w.r.t. known alternative strategies. First of all, trajectories in the operational space are planned on-the-fly, so that singularities are handled in real-time. This result is obtained by changing slightly the tool-frame orientation, while strictly preserving the assigned Cartesian paths and the time-laws. Furthermore, the approach is effective also for manipulators moving at standard operative speeds and it explicitly handles given limits on joint velocities and accelerations. Results are experimentally validated through an anthropomorphic industrial manipulator.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1302-1309
An automatic system for the avoidance of wrist singularities in anthropomorphic manipulators
The automatic management of kinematic singularities for trajectories planned in the operational space is a topic which is attracting a renewed interest in the scientific community. In fact, the numerical efficiency of the strategies recently proposed makes them suitable to be exploited in industrial contexts. The approach proposed in this paper can be collocated within this framework, since it allows executing trajectories in the operational space which pass through wrist singularities. It introduces several novelties w.r.t. known alternative strategies. First of all, trajectories in the operational space are planned on-the-fly, so that singularities are handled in real-time. This result is obtained by changing slightly the tool-frame orientation, while strictly preserving the assigned Cartesian paths and the time-laws. Furthermore, the approach is effective also for manipulators moving at standard operative speeds and it explicitly handles given limits on joint velocities and accelerations. Results are experimentally validated through an anthropomorphic industrial manipulator.
- 26 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 345-350
A real-time strategy for the management of kinematic singularities: New progresses
Industrial processes which use robotic manipulators are progressively asking for the generation of real-time trajectories in order to quickly react to unpredictable events. However, trajectories generated in real-time may violate the kinematic constraints of the system and, therefore, may be unfeasible. Several online methods have been recently proposed for the constraint management. They particularly care about situations in which non-redundant manipulators pass close to kinematic singularities, which represent a critical problem for trajectories planned in the operational space: singular configurations are, in fact, the most difficult to be managed because the available reaction time is always short. In this work, one recently proposed real-time algorithm for the singularity management will be revised to improve its performance.
- 26 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 345-350
A real-time strategy for the management of kinematic singularities: New progresses
Industrial processes which use robotic manipulators are progressively asking for the generation of real-time trajectories in order to quickly react to unpredictable events. However, trajectories generated in real-time may violate the kinematic constraints of the system and, therefore, may be unfeasible. Several online methods have been recently proposed for the constraint management. They particularly care about situations in which non-redundant manipulators pass close to kinematic singularities, which represent a critical problem for trajectories planned in the operational space: singular configurations are, in fact, the most difficult to be managed because the available reaction time is always short. In this work, one recently proposed real-time algorithm for the singularity management will be revised to improve its performance.