Guillaume Brunin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guillaume Brunin has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
- Gian-Marco Rignanese
UCLouvain
10 shared publications - Geoffroy Hautier
Thayer School of Engineering, Dartmouth College, Hanover, USA
6 shared publications - Henrique Miranda
VASP Software GmbH
4 shared publications - Xavier Gonze
European Theoretical Spectroscopy Facility
4 shared publications - Massimiliano Stengel
Institut de Ciència de Materials de Barcelona (ICMAB-CSIC) Campus UAB 08193 Bellaterra Spain
3 shared publications - Matteo Giantomassi
Université catholique de Louvain
3 shared publications
Latest Publications
- Open Access
- 13 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (5) , e202400444
Hydrogen Evolution Reaction of Electrodeposited Ni‐W Films in Acidic Medium and Performance Optimization Using Machine Learning
Ni−W alloy films were electrodeposited from a gluconate aqueous bath at pH=5.0, at varying current densities and temperatures. While there is little to no difference in composition, i. e., all films possess ~12 at.% W, their activity at hydrogen evolution reaction (HER) in acidic medium is greatly influenced by differences in surface morphology. The kinetics of HER in 0.5 M H2SO4 indicates that the best performing film was obtained at a current density of −4.8 mA/cm2 and 50 °C. The Tafel slopes (b) and the overpotentials at a geometric current density of −10 mA/cm2 (η10) obtained for 200 cycles of linear sweep voltammetry (LSV) from a set of films deposited using different parameters were fed into a machine learning algorithm to predict optimum deposition conditions to minimize b, η10, and the degradation of samples over time. The optimum deposition conditions predicted by the machine learning model led to the electrodeposition of Ni−W films with superior performance, exhibiting b of 33–45 mV/dec and an η10 of 0.09–0.10 V after 200 LSVs.
- 13 November 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (5) , e202400444
Open AccessHydrogen Evolution Reaction of Electrodeposited Ni‐W Films in Acidic Medium and Performance Optimization Using Machine Learning
Ni−W alloy films were electrodeposited from a gluconate aqueous bath at pH=5.0, at varying current densities and temperatures. While there is little to no difference in composition, i. e., all films possess ~12 at.% W, their activity at hydrogen evolution reaction (HER) in acidic medium is greatly influenced by differences in surface morphology. The kinetics of HER in 0.5 M H2SO4 indicates that the best performing film was obtained at a current density of −4.8 mA/cm2 and 50 °C. The Tafel slopes (b) and the overpotentials at a geometric current density of −10 mA/cm2 (η10) obtained for 200 cycles of linear sweep voltammetry (LSV) from a set of films deposited using different parameters were fed into a machine learning algorithm to predict optimum deposition conditions to minimize b, η10, and the degradation of samples over time. The optimum deposition conditions predicted by the machine learning model led to the electrodeposition of Ni−W films with superior performance, exhibiting b of 33–45 mV/dec and an η10 of 0.09–0.10 V after 200 LSVs.
- Open Access
- 18 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Strong electron-phonon coupling driven pseudogap modulation and density-wave fluctuations in a correlated polar metal
There is tremendous interest in employing collective excitations of the lattice, spin, charge, and orbitals to tune strongly correlated electronic phenomena. We report such an effect in a ruthenate, Ca3Ru2O7, where two phonons with strong electron-phonon coupling modulate the electronic pseudogap as well as mediate charge and spin density wave fluctuations. Combining temperature-dependent Raman spectroscopy with density functional theory reveals two phonons, B2P and B2M, that are strongly coupled to electrons and whose scattering intensities respectively dominate in the pseudogap versus the metallic phases. The B2P squeezes the octahedra along the out of plane c-axis, while the B2M elongates it, thus modulating the Ru 4d orbital splitting and the bandwidth of the in-plane electron hopping; Thus, B2P opens the pseudogap, while B2M closes it. Moreover, the B2 phonons mediate incoherent charge and spin density wave fluctuations, as evidenced by changes in the background electronic Raman scattering that exhibit unique symmetry signatures. The polar order breaks inversion symmetry, enabling infrared activity of these phonons, paving the way for coherent light-driven control of electronic transport.
- 18 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessStrong electron-phonon coupling driven pseudogap modulation and density-wave fluctuations in a correlated polar metal
There is tremendous interest in employing collective excitations of the lattice, spin, charge, and orbitals to tune strongly correlated electronic phenomena. We report such an effect in a ruthenate, Ca3Ru2O7, where two phonons with strong electron-phonon coupling modulate the electronic pseudogap as well as mediate charge and spin density wave fluctuations. Combining temperature-dependent Raman spectroscopy with density functional theory reveals two phonons, B2P and B2M, that are strongly coupled to electrons and whose scattering intensities respectively dominate in the pseudogap versus the metallic phases. The B2P squeezes the octahedra along the out of plane c-axis, while the B2M elongates it, thus modulating the Ru 4d orbital splitting and the bandwidth of the in-plane electron hopping; Thus, B2P opens the pseudogap, while B2M closes it. Moreover, the B2 phonons mediate incoherent charge and spin density wave fluctuations, as evidenced by changes in the background electronic Raman scattering that exhibit unique symmetry signatures. The polar order breaks inversion symmetry, enabling infrared activity of these phonons, paving the way for coherent light-driven control of electronic transport.
- 28 November 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (20) , 209901
Erratum: “Indirect light absorption model for highly strained silicon infrared sensors” [J. Appl. Phys. 130, 055105 (2021)]
- 28 November 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (20) , 209901
Erratum: “Indirect light absorption model for highly strained silicon infrared sensors” [J. Appl. Phys. 130, 055105 (2021)]
- 4 August 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (5) , 055105
Indirect light absorption model for highly strained silicon infrared sensors
The optical properties of silicon can be greatly tuned by applying strain and opening new perspectives, particularly in applications where infrared is key. In this work, we use a recent model for the indirect light absorption of silicon and include the effects of tensile and compressive uniaxial strains. The model is based on material properties such as the bandgap, the conduction and valence band density-of-states effective masses, and the phonon frequencies, which are obtained from first principles including strain up to % along the [110] and [111] directions. We show that the limit of absorption can increase from 1.14 (1.09) to 1.35 m (0.92 eV) under 2% strain and that the absorption increases by a factor of 55 for the zero-strain cutoff wavelength of 1.14 m when a 2% compressive strain is applied in the [110] direction. We demonstrate that this effect is mainly due to the impact of strain on the electronic bandgaps of silicon, directly followed by the valence band density-of-states effective mass.- 4 August 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (5) , 055105
Indirect light absorption model for highly strained silicon infrared sensors
The optical properties of silicon can be greatly tuned by applying strain and opening new perspectives, particularly in applications where infrared is key. In this work, we use a recent model for the indirect light absorption of silicon and include the effects of tensile and compressive uniaxial strains. The model is based on material properties such as the bandgap, the conduction and valence band density-of-states effective masses, and the phonon frequencies, which are obtained from first principles including strain up to % along the [110] and [111] directions. We show that the limit of absorption can increase from 1.14 (1.09) to 1.35 m (0.92 eV) under 2% strain and that the absorption increases by a factor of 55 for the zero-strain cutoff wavelength of 1.14 m when a 2% compressive strain is applied in the [110] direction. We demonstrate that this effect is mainly due to the impact of strain on the electronic bandgaps of silicon, directly followed by the valence band density-of-states effective mass.- 27 July 2021
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 14 (9) , 5057-5073
High-throughput computational search for high carrier lifetime, defect-tolerant solar absorbers
We present an ab initio high-throughput screening approach to search for new high-efficiency photovoltaic absorbers taking into account carrier lifetime and recombination through defects.
- 27 July 2021
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 14 (9) , 5057-5073
High-throughput computational search for high carrier lifetime, defect-tolerant solar absorbers
We present an ab initio high-throughput screening approach to search for new high-efficiency photovoltaic absorbers taking into account carrier lifetime and recombination through defects.
- Top Cited Papers
- 21 September 2020
- Published by American Physical Society (APS) in Physical Review B
- Vol. 102 (9) , 094308
Phonon-limited electron mobility in Si, GaAs, and GaP with exact treatment of dynamical quadrupoles
We describe a new approach to compute the electron-phonon self-energy and carrier mobilities in semiconductors. Our implementation does not require a localized basis set to interpolate the electron-phonon matrix elements, with the advantage that computations can be easily automated. Scattering potentials are interpolated on dense meshes using Fourier transforms and ab initio models to describe the long-range potentials generated by dipoles and quadrupoles. To reduce significantly the computational cost, we take advantage of crystal symmetries and employ the linear tetrahedron method and double-grid integration schemes, in conjunction with filtering techniques in the Brillouin zone. We report results for the electron mobility in Si, GaAs, and GaP obtained with this new methodology.- 21 September 2020
- Published by American Physical Society (APS) in Physical Review B
- Vol. 102 (9) , 094308
Top Cited PapersPhonon-limited electron mobility in Si, GaAs, and GaP with exact treatment of dynamical quadrupoles
We describe a new approach to compute the electron-phonon self-energy and carrier mobilities in semiconductors. Our implementation does not require a localized basis set to interpolate the electron-phonon matrix elements, with the advantage that computations can be easily automated. Scattering potentials are interpolated on dense meshes using Fourier transforms and ab initio models to describe the long-range potentials generated by dipoles and quadrupoles. To reduce significantly the computational cost, we take advantage of crystal symmetries and employ the linear tetrahedron method and double-grid integration schemes, in conjunction with filtering techniques in the Brillouin zone. We report results for the electron mobility in Si, GaAs, and GaP obtained with this new methodology. - Top Cited Papers
- 21 September 2020
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 125 (13) , 136601
Electron-Phonon beyond Fröhlich: Dynamical Quadrupoles in Polar and Covalent Solids
We include the treatment of quadrupolar fields beyond the Fröhlich interaction in the first-principles electron-phonon vertex in semiconductors. Such quadrupolar fields induce long-range interactions that have to be taken into account for accurate physical results. We apply our formalism to Si (nonpolar), GaAs, and GaP (polar) and demonstrate that electron mobilities show large errors if dynamical quadrupoles are not properly treated.
- 21 September 2020
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 125 (13) , 136601
Top Cited PapersElectron-Phonon beyond Fröhlich: Dynamical Quadrupoles in Polar and Covalent Solids
We include the treatment of quadrupolar fields beyond the Fröhlich interaction in the first-principles electron-phonon vertex in semiconductors. Such quadrupolar fields induce long-range interactions that have to be taken into account for accurate physical results. We apply our formalism to Si (nonpolar), GaAs, and GaP (polar) and demonstrate that electron mobilities show large errors if dynamical quadrupoles are not properly treated.
- 8 June 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (6) , 065401
Boron phosphide as a -type transparent conductor: Optical absorption and transport through electron-phonon couplingBoron phosphide has recently been identified as a potential high-hole-mobility transparent conducting material. This promise arises from its low hole effective masses. However, boron phosphide has a relatively small, 2 eV, indirect bandgap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify the potential of boron phosphide as a -type transparent conductor. We find that phonon-mediated indirect optical absorption is weak in the visible spectrum and that the phonon-limited hole mobility is very high (around 900 /Vs) at room temperature. This exceptional mobility comes from the combination of a low hole effective mass and very weak scattering by polar phonon modes. We rationalize the weak scattering by the less ionic bonding in boron phosphide compared to oxides. We suggest that this could be a general advantage of nonoxides for -type transparent conducting applications. Using our computed properties, we assess the transparent conductor figure of merit of boron phosphide and show that it exceeds by one order of magnitude that of established -type transparent conductors, confirming the potential of this material.- 8 June 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (6) , 065401
Boron phosphide as a -type transparent conductor: Optical absorption and transport through electron-phonon couplingBoron phosphide has recently been identified as a potential high-hole-mobility transparent conducting material. This promise arises from its low hole effective masses. However, boron phosphide has a relatively small, 2 eV, indirect bandgap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify the potential of boron phosphide as a -type transparent conductor. We find that phonon-mediated indirect optical absorption is weak in the visible spectrum and that the phonon-limited hole mobility is very high (around 900 /Vs) at room temperature. This exceptional mobility comes from the combination of a low hole effective mass and very weak scattering by polar phonon modes. We rationalize the weak scattering by the less ionic bonding in boron phosphide compared to oxides. We suggest that this could be a general advantage of nonoxides for -type transparent conducting applications. Using our computed properties, we assess the transparent conductor figure of merit of boron phosphide and show that it exceeds by one order of magnitude that of established -type transparent conductors, confirming the potential of this material.- Top Cited Papers
- 24 March 2020
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 152 (12) , 124102
ABINIT: Overview and focus on selected capabilities
Abinit is probably the first electronic-structure package to have been released under an open-source license about 20 years ago. It implements density functional theory, density-functional perturbation theory (DFPT), many-body perturbation theory (GW approximation and Bethe–Salpeter equation), and more specific or advanced formalisms, such as dynamical mean-field theory (DMFT) and the “temperature-dependent effective potential” approach for anharmonic effects. Relying on planewaves for the representation of wavefunctions, density, and other space-dependent quantities, with pseudopotentials or projector-augmented waves (PAWs), it is well suited for the study of periodic materials, although nanostructures and molecules can be treated with the supercell technique. The present article starts with a brief description of the project, a summary of the theories upon which abinit relies, and a list of the associated capabilities. It then focuses on selected capabilities that might not be present in the majority of electronic structure packages either among planewave codes or, in general, treatment of strongly correlated materials using DMFT; materials under finite electric fields; properties at nuclei (electric field gradient, Mössbauer shifts, and orbital magnetization); positron annihilation; Raman intensities and electro-optic effect; and DFPT calculations of response to strain perturbation (elastic constants and piezoelectricity), spatial dispersion (flexoelectricity), electronic mobility, temperature dependence of the gap, and spin-magnetic-field perturbation. The abinit DFPT implementation is very general, including systems with van der Waals interaction or with noncollinear magnetism. Community projects are also described: generation of pseudopotential and PAW datasets, high-throughput calculations (databases of phonon band structure, second-harmonic generation, and GW computations of bandgaps), and the library libpaw. abinit has strong links with many other software projects that are briefly mentioned.
- 24 March 2020
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 152 (12) , 124102
Top Cited PapersABINIT: Overview and focus on selected capabilities
Abinit is probably the first electronic-structure package to have been released under an open-source license about 20 years ago. It implements density functional theory, density-functional perturbation theory (DFPT), many-body perturbation theory (GW approximation and Bethe–Salpeter equation), and more specific or advanced formalisms, such as dynamical mean-field theory (DMFT) and the “temperature-dependent effective potential” approach for anharmonic effects. Relying on planewaves for the representation of wavefunctions, density, and other space-dependent quantities, with pseudopotentials or projector-augmented waves (PAWs), it is well suited for the study of periodic materials, although nanostructures and molecules can be treated with the supercell technique. The present article starts with a brief description of the project, a summary of the theories upon which abinit relies, and a list of the associated capabilities. It then focuses on selected capabilities that might not be present in the majority of electronic structure packages either among planewave codes or, in general, treatment of strongly correlated materials using DMFT; materials under finite electric fields; properties at nuclei (electric field gradient, Mössbauer shifts, and orbital magnetization); positron annihilation; Raman intensities and electro-optic effect; and DFPT calculations of response to strain perturbation (elastic constants and piezoelectricity), spatial dispersion (flexoelectricity), electronic mobility, temperature dependence of the gap, and spin-magnetic-field perturbation. The abinit DFPT implementation is very general, including systems with van der Waals interaction or with noncollinear magnetism. Community projects are also described: generation of pseudopotential and PAW datasets, high-throughput calculations (databases of phonon band structure, second-harmonic generation, and GW computations of bandgaps), and the library libpaw. abinit has strong links with many other software projects that are briefly mentioned.
- Top Cited Papers
- 1 March 2020
- Published by Elsevier in Computer Physics Communications
- Vol. 248
The Abinitproject: Impact, environment and recent developments
- 1 March 2020
- Published by Elsevier in Computer Physics Communications
- Vol. 248
Top Cited PapersThe Abinitproject: Impact, environment and recent developments