Kenji Tanaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kenji Tanaka has a total of 489 co-authors. Here are the top co-authors by number of shared publications:
- Katsumi Ida
National Institute for Fusion Science, National Institutes of Natural Sciences 1 , Toki 509-5292
19 shared publications - Tokihiko Tokuzawa
National Institute for Fusion Science, National Institutes of Natural Sciences, Toki, Japan
10 shared publications - Suguru Masuzaki
National Institute for Fusion Science
9 shared publications - Tatsuya Kobayashi
National Institute for Fusion Science, National Institutes of Natural Sciences 1 , Toki 509-5292
9 shared publications - Yuki Takemura
National Institute for Fusion Science, National Institutes of Natural Sciences, Toki, Japan
9 shared publications - Motoki Nakata
Komazawa University
8 shared publications
Latest Publications
- Open Access
- 7 August 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (2) , 55
Development and Application of Collective Thomson Scattering Diagnostics for Energetic and Bulk Ion Measurements in the Large Helical Device
- 7 August 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (2) , 55
Open AccessDevelopment and Application of Collective Thomson Scattering Diagnostics for Energetic and Bulk Ion Measurements in the Large Helical Device
- Open Access
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085042
Diagnostics for large tokamaks: from JET to JT-60SA 1
The main scientific purpose of JT-60SA is to complement ITER in the preparation of the operation of a DEMOnstration fusion reactor, in particular investigating the conditions for a controllable high-beta steady-state regime able to optimise the fusion gain. In order to accomplish this task, a sequence of operation and machine enhancement periods in the next few years are planned to reach the target performance of the machine before a transition to a full tungsten wall. EUROfusion and Fusion for Energy are jointly contributing to the enhancement plan of JT-60SA, in particular, with regard to the present contribution, to provide JT-60SA with state-of-the-art diagnostics in support of its scientific and technical objectives. This paper reports the status of the projects being implemented in view of the next scientific campaigns or under consideration through the various stages from feasibility to detailed design.
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085042
Open AccessDiagnostics for large tokamaks: from JET to JT-60SA 1
The main scientific purpose of JT-60SA is to complement ITER in the preparation of the operation of a DEMOnstration fusion reactor, in particular investigating the conditions for a controllable high-beta steady-state regime able to optimise the fusion gain. In order to accomplish this task, a sequence of operation and machine enhancement periods in the next few years are planned to reach the target performance of the machine before a transition to a full tungsten wall. EUROfusion and Fusion for Energy are jointly contributing to the enhancement plan of JT-60SA, in particular, with regard to the present contribution, to provide JT-60SA with state-of-the-art diagnostics in support of its scientific and technical objectives. This paper reports the status of the projects being implemented in view of the next scientific campaigns or under consideration through the various stages from feasibility to detailed design.
- Open Access
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085007
Analysis of the bursting activity in Large Helical Device plasma with multiple energetic particle populations
Burst events can severely deteriorate the performance of future stellarator fusion reactors by reducing the plasma heating efficiency and confinement. Bursting activity has been observed in Large Helical Device (LHD) operation scenarios strongly heated by neutral beam injectors (NBIs). This study analyzes the performance degradation in LHD discharge 189008 , linked to the destabilization of burst events. To that aim, the stability of Alfvén eigenmodes (AEs) and energetic-ion-driven resistive interchange modes (EICs) is analyzed. Linear and nonlinear simulations using the gyro-fluid code FAR3d reproduce the multiple toroidal AEs (TAEs) measured in the frequency range of 40 − 80 kHz, leading to the destabilization of an MHD burst (induced by passing energetic particles (EPs) injected by tangential NBI), as well as the destabilization of EICs at around 12 kHz, which causes the EIC burst (caused by helically trapped EPs injected by the perpendicular NBI). This study suggests that burst events can be induced by the nonlinear interaction between passing (tangential NBI) and helically trapped (perpendicular NBI) EP populations, creating a feedback effect that enhances the EP drive. The magnetohydrodynamic (MHD) burst causes 30 % of passing EP loss, and the EIC burst up to 90 % of trapped EP loss, an EP confinement degradation that may partially explain the decrease in device performance. The analysis also indicates that the EP transport induced during the burst events is ballistic, and linked to avalanche-like processes, leading to intense EP fluxes. In addition, the bursting activity affects the thermal plasma confinement, observed as a decrease in the thermal electron density, reproduced in the simulations as a decay in the thermal plasma pressure. The simulation output shows reasonable agreement with different diagnostic measurements, including the enhanced magnetic perturbations detected by Mirnov coils once the perpendicular NBI operation and bursting activity begin, the intensity and radial location of the radial electric field and shear flows from charge exchange spectroscopy diagnostic data, as well as the instability frequency range and dominant mode numbers calculated from the magnetics data. The main conclusion of the analysis is that the nonlinear feedback between different EP populations can enhance the EP drive, leading to the onset of bursting events and the degradation of burning plasma performance, particularly in scenarios with a large amount of EPs generated by different heating mechanisms that may destabilize the alpha particle population.
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085007
Open AccessAnalysis of the bursting activity in Large Helical Device plasma with multiple energetic particle populations
Burst events can severely deteriorate the performance of future stellarator fusion reactors by reducing the plasma heating efficiency and confinement. Bursting activity has been observed in Large Helical Device (LHD) operation scenarios strongly heated by neutral beam injectors (NBIs). This study analyzes the performance degradation in LHD discharge 189008 , linked to the destabilization of burst events. To that aim, the stability of Alfvén eigenmodes (AEs) and energetic-ion-driven resistive interchange modes (EICs) is analyzed. Linear and nonlinear simulations using the gyro-fluid code FAR3d reproduce the multiple toroidal AEs (TAEs) measured in the frequency range of 40 − 80 kHz, leading to the destabilization of an MHD burst (induced by passing energetic particles (EPs) injected by tangential NBI), as well as the destabilization of EICs at around 12 kHz, which causes the EIC burst (caused by helically trapped EPs injected by the perpendicular NBI). This study suggests that burst events can be induced by the nonlinear interaction between passing (tangential NBI) and helically trapped (perpendicular NBI) EP populations, creating a feedback effect that enhances the EP drive. The magnetohydrodynamic (MHD) burst causes 30 % of passing EP loss, and the EIC burst up to 90 % of trapped EP loss, an EP confinement degradation that may partially explain the decrease in device performance. The analysis also indicates that the EP transport induced during the burst events is ballistic, and linked to avalanche-like processes, leading to intense EP fluxes. In addition, the bursting activity affects the thermal plasma confinement, observed as a decrease in the thermal electron density, reproduced in the simulations as a decay in the thermal plasma pressure. The simulation output shows reasonable agreement with different diagnostic measurements, including the enhanced magnetic perturbations detected by Mirnov coils once the perpendicular NBI operation and bursting activity begin, the intensity and radial location of the radial electric field and shear flows from charge exchange spectroscopy diagnostic data, as well as the instability frequency range and dominant mode numbers calculated from the magnetics data. The main conclusion of the analysis is that the nonlinear feedback between different EP populations can enhance the EP drive, leading to the onset of bursting events and the degradation of burning plasma performance, particularly in scenarios with a large amount of EPs generated by different heating mechanisms that may destabilize the alpha particle population.
- Open Access
- 29 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11) , 116012
Recent advances in plasma control and physics research in the Large Helical Device
The Large Helical Device (LHD), the largest superconducting helical system in the world, is equipped with advanced heating and diagnostic tools, facilitating plasma control and physics research. Data assimilation was employed for electron temperature control using a real-time Thomson scattering system and real time prediction code. A virtual LHD environment enabled visualization of escaping high-energy tritium ions and demonstrated that these ions impact the rear side of the divertor plate. Pioneering results crucial to plasma control have also been achieved. Real-time wall conditioning using Lithium granule dropping improved bulk ion energy and particle transport while simultaneously enhancing the heavy impurity transport. Progress has also been made in the investigation of turbulence-driven transport. At the confinement bifurcation, ion-scale turbulence decreased, while electron-scale turbulence increased. A change in the anisotropy of turbulent eddies was also observed at the confinement bifurcation. Coexistence of local and non-local turbulence was identified in electron-scale turbulence. Non-local turbulence exhibited the rapid spatial propagation of perturbations throughout the plasma, while local turbulence followed the temperature gradient. A transition between drift-wave turbulence and magnetohydrodynamics (MHD) turbulence was observed with the turbulence minimized at the transition condition. Machine learning analysis was employed to evaluate the temperate and density conditions of this turbulence transition. Then, real-time control of fueling and heating was applied to maintain the turbulence transition condition, improving the energy confinement enhancement factor by 20%. In addition, evidence was obtained for collisionless ion heating by energetic-ion-driven geodesic acoustic modes and MHD bursts. These achievements represent unique contributions to the development of fusion reactors.
- 29 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11) , 116012
Open AccessRecent advances in plasma control and physics research in the Large Helical Device
The Large Helical Device (LHD), the largest superconducting helical system in the world, is equipped with advanced heating and diagnostic tools, facilitating plasma control and physics research. Data assimilation was employed for electron temperature control using a real-time Thomson scattering system and real time prediction code. A virtual LHD environment enabled visualization of escaping high-energy tritium ions and demonstrated that these ions impact the rear side of the divertor plate. Pioneering results crucial to plasma control have also been achieved. Real-time wall conditioning using Lithium granule dropping improved bulk ion energy and particle transport while simultaneously enhancing the heavy impurity transport. Progress has also been made in the investigation of turbulence-driven transport. At the confinement bifurcation, ion-scale turbulence decreased, while electron-scale turbulence increased. A change in the anisotropy of turbulent eddies was also observed at the confinement bifurcation. Coexistence of local and non-local turbulence was identified in electron-scale turbulence. Non-local turbulence exhibited the rapid spatial propagation of perturbations throughout the plasma, while local turbulence followed the temperature gradient. A transition between drift-wave turbulence and magnetohydrodynamics (MHD) turbulence was observed with the turbulence minimized at the transition condition. Machine learning analysis was employed to evaluate the temperate and density conditions of this turbulence transition. Then, real-time control of fueling and heating was applied to maintain the turbulence transition condition, improving the energy confinement enhancement factor by 20%. In addition, evidence was obtained for collisionless ion heating by energetic-ion-driven geodesic acoustic modes and MHD bursts. These achievements represent unique contributions to the development of fusion reactors.
- Open Access
- 9 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076017
Real-time tracking of the turbulence-minimum state for optimizing plasma confinement in LHD
Turbulence-driven anomalous transport is one of the primary factors that degrade plasma confinement performance and remains a common challenge in both tokamaks and stellarators/heliotrons. In the Large Helical Device, the dominant turbulence mode—either ion temperature gradient or resistive interchange—varies according to the plasma operational regime, thereby determining the confinement characteristics (Kinoshita et al 2024 Phys. Rev. Lett. 132 235101). In particular, when the turbulent mode switches, both turbulence and anomalous transport are minimized. In this study, by employing an exhaustive search combined with a support vector machine, we successfully identified the condition under which this turbulence transition occurs as a function of externally controllable parameters. The results demonstrate that the transition boundary—representing the state where turbulence is minimized—can be effectively characterized by a linear relationship: n e ( 10 19 m − 3 ) = 4.25 T e ( keV ) − 5.36 . By implementing real-time feedback control to actively track this boundary, a sustained turbulence-suppressed state was achieved. This strategy provides a robust foundation for optimizing plasma performance in future fusion devices, where the synergy between real-time boundary tracking and transport-property exploitation can autonomously guide the plasma toward its highest confinement potential.
- 9 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076017
Open AccessReal-time tracking of the turbulence-minimum state for optimizing plasma confinement in LHD
Turbulence-driven anomalous transport is one of the primary factors that degrade plasma confinement performance and remains a common challenge in both tokamaks and stellarators/heliotrons. In the Large Helical Device, the dominant turbulence mode—either ion temperature gradient or resistive interchange—varies according to the plasma operational regime, thereby determining the confinement characteristics (Kinoshita et al 2024 Phys. Rev. Lett. 132 235101). In particular, when the turbulent mode switches, both turbulence and anomalous transport are minimized. In this study, by employing an exhaustive search combined with a support vector machine, we successfully identified the condition under which this turbulence transition occurs as a function of externally controllable parameters. The results demonstrate that the transition boundary—representing the state where turbulence is minimized—can be effectively characterized by a linear relationship: n e ( 10 19 m − 3 ) = 4.25 T e ( keV ) − 5.36 . By implementing real-time feedback control to actively track this boundary, a sustained turbulence-suppressed state was achieved. This strategy provides a robust foundation for optimizing plasma performance in future fusion devices, where the synergy between real-time boundary tracking and transport-property exploitation can autonomously guide the plasma toward its highest confinement potential.
- Open Access
- 1 June 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (6) , 062503
High resolution measurements of core density collapse dynamics in LHD
The core density collapse (CDC) is an abrupt instability that degrades the performance of super dense core stellarator plasmas on the Large Helical Device (LHD). In LHD, CDCs have proved to be an operational limit in so-called outward-shifted configurations. New measurements with high time resolution Thomson scattering characterize dynamics of the instability in the core. The density profile is observed to collapse inwards, narrowing the density peak till the core itself collapses. A hot, radially localized feature is also observed in the electron temperature profile during the collapse and disappears within a few hundred microseconds of CDC onset.
- 1 June 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (6) , 062503
Open AccessHigh resolution measurements of core density collapse dynamics in LHD
The core density collapse (CDC) is an abrupt instability that degrades the performance of super dense core stellarator plasmas on the Large Helical Device (LHD). In LHD, CDCs have proved to be an operational limit in so-called outward-shifted configurations. New measurements with high time resolution Thomson scattering characterize dynamics of the instability in the core. The density profile is observed to collapse inwards, narrowing the density peak till the core itself collapses. A hot, radially localized feature is also observed in the electron temperature profile during the collapse and disappears within a few hundred microseconds of CDC onset.
- Open Access
- 5 May 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (1) , 35
CO2-laser Interferometer on the Large Helical Device
This study reports the development of $$\hbox {CO}_2$$ laser interferometers for electron density measurements on the large helical device (LHD). Two types of interferometers using approximately 10 $$\mu m$$ are developed. One is an imaging two-color laser interferometer (I-TCI) for measuring density profiles and macroscopic fluctuations of MHD instabilities, and the other is a single channel phase-modulated dispersion interferometer (PMDI) designed for reliable density monitoring. The diagnostic principles, systems, and analysis techniques are outlined, and representative measurement results are presented. The I-TCI system was also designed to operate in the deuterium experiments performed on LHD from 2017 until 2022. Shielding against neutron and $$\gamma$$ -ray irradiation was necessary to prevent damage to the I-TCI detection system. Design strategies for neutron and $$\gamma$$ -ray shielding are presented in the appendices.- 5 May 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (1) , 35
Open AccessCO2-laser Interferometer on the Large Helical Device
This study reports the development of $$\hbox {CO}_2$$ laser interferometers for electron density measurements on the large helical device (LHD). Two types of interferometers using approximately 10 $$\mu m$$ are developed. One is an imaging two-color laser interferometer (I-TCI) for measuring density profiles and macroscopic fluctuations of MHD instabilities, and the other is a single channel phase-modulated dispersion interferometer (PMDI) designed for reliable density monitoring. The diagnostic principles, systems, and analysis techniques are outlined, and representative measurement results are presented. The I-TCI system was also designed to operate in the deuterium experiments performed on LHD from 2017 until 2022. Shielding against neutron and $$\gamma$$ -ray irradiation was necessary to prevent damage to the I-TCI detection system. Design strategies for neutron and $$\gamma$$ -ray shielding are presented in the appendices. - Open Access
- 17 April 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (1) , 30
Experiments on Physics Issues in Burning Plasma: Isotope Mixing and Ion Collisionless Energy Transfer
Experiments on physics issues in burning plasma were conducted in the deuterium campaign of Large Helical Devices (LHD). One is an isotope mixing experiment, and the other is the collisionless energy transfer from energetic particles to bulk ions. The important finding for ion mixing in the LHD experiment is that the ITG turbulence (but not TEM turbulence) contributes to the isotope and ion mixing, which is beneficial for controlling the isotope ratio (deuterium and tritium) and helium ash exhaust. The experimental identification of energy transfer from energetic particles to bulk ions through Landau damping and transit-time damping suggests a possible ion-heating process for the ion-ITB plasma with ( $$T_i/T_e> 1$$ ) through collisionless energy transfer from alpha particles to bulk ions through energetic particle-driven instability, so-called alpha channeling.- 17 April 2026
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 45 (1) , 30
Open AccessExperiments on Physics Issues in Burning Plasma: Isotope Mixing and Ion Collisionless Energy Transfer
Experiments on physics issues in burning plasma were conducted in the deuterium campaign of Large Helical Devices (LHD). One is an isotope mixing experiment, and the other is the collisionless energy transfer from energetic particles to bulk ions. The important finding for ion mixing in the LHD experiment is that the ITG turbulence (but not TEM turbulence) contributes to the isotope and ion mixing, which is beneficial for controlling the isotope ratio (deuterium and tritium) and helium ash exhaust. The experimental identification of energy transfer from energetic particles to bulk ions through Landau damping and transit-time damping suggests a possible ion-heating process for the ion-ITB plasma with ( $$T_i/T_e> 1$$ ) through collisionless energy transfer from alpha particles to bulk ions through energetic particle-driven instability, so-called alpha channeling. - Open Access
- 22 November 2025
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 44 (2) , 57
Analysis of Energetic Particle Driven Modes and Interchange Modes in LHD Plasma Using the Gyro-Fluid Code FAR3d
- 22 November 2025
- Published by Springer Nature in Journal of Fusion Energy
- Vol. 44 (2) , 57
Open AccessAnalysis of Energetic Particle Driven Modes and Interchange Modes in LHD Plasma Using the Gyro-Fluid Code FAR3d
- 1 November 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (11) , C11008
Dispersion interferometer for the measurements of laser produced plasma
We developed the dispersion interferometer (DI) to measure the temporal evolution of electron density in laser-produced plasmas (LPPs). The purpose of the development is to have a reliable LPP density monitor for the lithography source of extreme ultra violet radiation. A single detector and a homodyne detection technique were utilized. The DI has the advantage of a simple system and a stable signal. The effect of mechanical vibrations are self-compensated. However, the change of laser intensity due to refraction effects disturb the homodyne detection signal. Thus, the effects of the refraction were eliminated using a different initial phase. Afterward, the temporal evolution of the electron density of laser produced tungsten plasma were measured.
- 1 November 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (11) , C11008
Dispersion interferometer for the measurements of laser produced plasma
We developed the dispersion interferometer (DI) to measure the temporal evolution of electron density in laser-produced plasmas (LPPs). The purpose of the development is to have a reliable LPP density monitor for the lithography source of extreme ultra violet radiation. A single detector and a homodyne detection technique were utilized. The DI has the advantage of a simple system and a stable signal. The effect of mechanical vibrations are self-compensated. However, the change of laser intensity due to refraction effects disturb the homodyne detection signal. Thus, the effects of the refraction were eliminated using a different initial phase. Afterward, the temporal evolution of the electron density of laser produced tungsten plasma were measured.