Minttu Havu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Minttu Havu has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Leena Järvi
Institute for Atmospheric and Earth System Research / Physics, Faculty of Science, University of Helsinki, Helsinki, Finland
31 shared publications - Liisa Kulmala
Finnish Meteorological Institute (FMI), Climate System Research, Helsinki, Finland
22 shared publications - Leif Backman
Finnish Meteorological Institute
17 shared publications - Esko Karvinen
Climate System Research, Finnish Meteorological Institute, Helsinki, Finland
10 shared publications - Laura Thölix
Finnish Meteorological Institute, Helsinki, Finland
9 shared publications - Dominik Brunner
Empa, Laboratory for Air Pollution/Environmental Technology, Dübendorf, Switzerland
8 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
Comment on egusphere-2026-5098
As cities are taking actions to reduce their carbon dioxide (CO2) emissions, the potential of urban vegetation to act as a carbon sink has received increasing attention. Carbon sequestration, however, has large uncertainties due to the highly variable and mosaic nature of urban vegetation. For land surface models to realistically estimate carbon sinks in urban areas, they need to be able to describe various urban vegetation types and their responses to environmental controls. One such model is the Surface Urban Energy and Water balance Scheme (SUEWS), which is an urban land surface model that can simulate energy, water and CO2 exchanges in cities. For SUEWS to accurately simulate the biogenic CO2 fluxes, it requires information on surface conductance controlling stomatal opening, maximum photosynthesis values, and parameters for soil and vegetation respiration. The main aims of this study are to provide a more comprehensive set of vegetation parameters derived from eddy covariance and chamber observations to extend the usability of SUEWS in different cities, and to evaluate the selection of the specific vegetation parameters on SUEWS model performance in two mid-latitude cities: Swindon (UK) and Minneapolis (US). The results highlight the importance of appropriate selection of surface conductance, maximum photosynthesis, and soil and vegetation parameters for different types of vegetation to be able to accurately simulate the biogenic and net carbon fluxes at monthly and annual level. Surface conductance parameters are most affected by soil moisture and specific humidity, rather than radiation and air temperature. The model performs better with tree surface conductance parameters (R = 0.62–0.70 in Swindon, R = 0.61–0.74 in Minneapolis) than lawn or low vegetation parameters (R ≤ 0.48 in Swindon, R ≤ 0.72 in Minneapolis), even in areas with smaller tree cover, highlighting the significance of urban trees in controlling overall stomatal conductance. The sensitivity of CO2 fluxes to parameter selection is greater than that of latent heat fluxes with R ranging between -0.26–0.74 when compared to 0.60–0.90. Carbon balances are influenced by traffic levels, air temperatures, and rates of photosynthesis and soil respiration. Overall, the findings emphasize the necessity for accurate observations of urban vegetation to effectively parameterise urban vegetation and soil, as using inappropriate reference vegetation can lead to substantial errors in estimating biogenic exchanges.
- 11 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-35
Open AccessComment on egusphere-2026-5098
As cities are taking actions to reduce their carbon dioxide (CO2) emissions, the potential of urban vegetation to act as a carbon sink has received increasing attention. Carbon sequestration, however, has large uncertainties due to the highly variable and mosaic nature of urban vegetation. For land surface models to realistically estimate carbon sinks in urban areas, they need to be able to describe various urban vegetation types and their responses to environmental controls. One such model is the Surface Urban Energy and Water balance Scheme (SUEWS), which is an urban land surface model that can simulate energy, water and CO2 exchanges in cities. For SUEWS to accurately simulate the biogenic CO2 fluxes, it requires information on surface conductance controlling stomatal opening, maximum photosynthesis values, and parameters for soil and vegetation respiration. The main aims of this study are to provide a more comprehensive set of vegetation parameters derived from eddy covariance and chamber observations to extend the usability of SUEWS in different cities, and to evaluate the selection of the specific vegetation parameters on SUEWS model performance in two mid-latitude cities: Swindon (UK) and Minneapolis (US). The results highlight the importance of appropriate selection of surface conductance, maximum photosynthesis, and soil and vegetation parameters for different types of vegetation to be able to accurately simulate the biogenic and net carbon fluxes at monthly and annual level. Surface conductance parameters are most affected by soil moisture and specific humidity, rather than radiation and air temperature. The model performs better with tree surface conductance parameters (R = 0.62–0.70 in Swindon, R = 0.61–0.74 in Minneapolis) than lawn or low vegetation parameters (R ≤ 0.48 in Swindon, R ≤ 0.72 in Minneapolis), even in areas with smaller tree cover, highlighting the significance of urban trees in controlling overall stomatal conductance. The sensitivity of CO2 fluxes to parameter selection is greater than that of latent heat fluxes with R ranging between -0.26–0.74 when compared to 0.60–0.90. Carbon balances are influenced by traffic levels, air temperatures, and rates of photosynthesis and soil respiration. Overall, the findings emphasize the necessity for accurate observations of urban vegetation to effectively parameterise urban vegetation and soil, as using inappropriate reference vegetation can lead to substantial errors in estimating biogenic exchanges.
- Open Access
- 5 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-35
Sensitivity of biogenic carbon and heat fluxes to urban vegetation parametrisations in the urban land surface model SUEWS
As cities are taking actions to reduce their carbon dioxide (CO2) emissions, the potential of urban vegetation to act as a carbon sink has received increasing attention. Carbon sequestration, however, has large uncertainties due to the highly variable and mosaic nature of urban vegetation. For land surface models to realistically estimate carbon sinks in urban areas, they need to be able to describe various urban vegetation types and their responses to environmental controls. One such model is the Surface Urban Energy and Water balance Scheme (SUEWS), which is an urban land surface model that can simulate energy, water and CO2 exchanges in cities. For SUEWS to accurately simulate the biogenic CO2 fluxes, it requires information on surface conductance controlling stomatal opening, maximum photosynthesis values, and parameters for soil and vegetation respiration. The main aims of this study are to provide a more comprehensive set of vegetation parameters derived from eddy covariance and chamber observations to extend the usability of SUEWS in different cities, and to evaluate the selection of the specific vegetation parameters on SUEWS model performance in two mid-latitude cities: Swindon (UK) and Minneapolis (US). The results highlight the importance of appropriate selection of surface conductance, maximum photosynthesis, and soil and vegetation parameters for different types of vegetation to be able to accurately simulate the biogenic and net carbon fluxes at monthly and annual level. Surface conductance parameters are most affected by soil moisture and specific humidity, rather than radiation and air temperature. The model performs better with tree surface conductance parameters (R = 0.62–0.70 in Swindon, R = 0.61–0.74 in Minneapolis) than lawn or low vegetation parameters (R ≤ 0.48 in Swindon, R ≤ 0.72 in Minneapolis), even in areas with smaller tree cover, highlighting the significance of urban trees in controlling overall stomatal conductance. The sensitivity of CO2 fluxes to parameter selection is greater than that of latent heat fluxes with R ranging between -0.26–0.74 when compared to 0.60–0.90. Carbon balances are influenced by traffic levels, air temperatures, and rates of photosynthesis and soil respiration. Overall, the findings emphasize the necessity for accurate observations of urban vegetation to effectively parameterise urban vegetation and soil, as using inappropriate reference vegetation can lead to substantial errors in estimating biogenic exchanges.
- 5 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-35
Open AccessSensitivity of biogenic carbon and heat fluxes to urban vegetation parametrisations in the urban land surface model SUEWS
As cities are taking actions to reduce their carbon dioxide (CO2) emissions, the potential of urban vegetation to act as a carbon sink has received increasing attention. Carbon sequestration, however, has large uncertainties due to the highly variable and mosaic nature of urban vegetation. For land surface models to realistically estimate carbon sinks in urban areas, they need to be able to describe various urban vegetation types and their responses to environmental controls. One such model is the Surface Urban Energy and Water balance Scheme (SUEWS), which is an urban land surface model that can simulate energy, water and CO2 exchanges in cities. For SUEWS to accurately simulate the biogenic CO2 fluxes, it requires information on surface conductance controlling stomatal opening, maximum photosynthesis values, and parameters for soil and vegetation respiration. The main aims of this study are to provide a more comprehensive set of vegetation parameters derived from eddy covariance and chamber observations to extend the usability of SUEWS in different cities, and to evaluate the selection of the specific vegetation parameters on SUEWS model performance in two mid-latitude cities: Swindon (UK) and Minneapolis (US). The results highlight the importance of appropriate selection of surface conductance, maximum photosynthesis, and soil and vegetation parameters for different types of vegetation to be able to accurately simulate the biogenic and net carbon fluxes at monthly and annual level. Surface conductance parameters are most affected by soil moisture and specific humidity, rather than radiation and air temperature. The model performs better with tree surface conductance parameters (R = 0.62–0.70 in Swindon, R = 0.61–0.74 in Minneapolis) than lawn or low vegetation parameters (R ≤ 0.48 in Swindon, R ≤ 0.72 in Minneapolis), even in areas with smaller tree cover, highlighting the significance of urban trees in controlling overall stomatal conductance. The sensitivity of CO2 fluxes to parameter selection is greater than that of latent heat fluxes with R ranging between -0.26–0.74 when compared to 0.60–0.90. Carbon balances are influenced by traffic levels, air temperatures, and rates of photosynthesis and soil respiration. Overall, the findings emphasize the necessity for accurate observations of urban vegetation to effectively parameterise urban vegetation and soil, as using inappropriate reference vegetation can lead to substantial errors in estimating biogenic exchanges.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Linking neighborhood canopy coverage to city-scale biogenic CO2 uptake in Paris, France
Cities are major sources of anthropogenic carbon dioxide (CO2) emissions. Reducing these emissions is not enough to make urban areas carbon neutral without biogenic sinks offsetting a portion of the remaining emissions. Urban vegetation provides a CO2 sink that contributes to the net CO2 balance of a city. CO2 uptake of a neighborhood is strongly dependent on the number of trees, i.e. the canopy coverage. The current EU Nature Restoration Law recommends that each city should have a canopy coverage of 30% to get the multiple benefits of urban vegetation. However, this limit value is rarely reached at a neighborhood level, where most of the benefits take place. In this study, we utilized urban land surface model SUEWS (the Surface Urban Energy and Water balance Scheme) in greater Paris area, France, to examine the variability of biogenic CO2 fluxes across the city with different canopy coverages. SUEWS simulates joint energy, water, and CO2 exchanges on local neighborhood scale with meteorological forcing and vegetation-specific parameterizations. The study period was from March 2024 to June 2025, corresponding to the availability of eddy covariance (EC) measurements from an urban forest Vincennes located in eastern Paris, which were used to evaluate the model. The meteorological input was from ERA5 data. First, we tested the effect of choosing different sets of biogenic CO2 parameters (Park trees, street trees, forest) for modelling CO2 and heat fluxes. We then upscaled the results by modelling CO2 in the greater Paris area with a 500 m x 500 m resolution. Results of CO2 uptake were also compared to canopy coverage of the grids to see the effect of urban vegetation offsetting the CO2 emissions on a neighborhood scale.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessLinking neighborhood canopy coverage to city-scale biogenic CO2 uptake in Paris, France
Cities are major sources of anthropogenic carbon dioxide (CO2) emissions. Reducing these emissions is not enough to make urban areas carbon neutral without biogenic sinks offsetting a portion of the remaining emissions. Urban vegetation provides a CO2 sink that contributes to the net CO2 balance of a city. CO2 uptake of a neighborhood is strongly dependent on the number of trees, i.e. the canopy coverage. The current EU Nature Restoration Law recommends that each city should have a canopy coverage of 30% to get the multiple benefits of urban vegetation. However, this limit value is rarely reached at a neighborhood level, where most of the benefits take place. In this study, we utilized urban land surface model SUEWS (the Surface Urban Energy and Water balance Scheme) in greater Paris area, France, to examine the variability of biogenic CO2 fluxes across the city with different canopy coverages. SUEWS simulates joint energy, water, and CO2 exchanges on local neighborhood scale with meteorological forcing and vegetation-specific parameterizations. The study period was from March 2024 to June 2025, corresponding to the availability of eddy covariance (EC) measurements from an urban forest Vincennes located in eastern Paris, which were used to evaluate the model. The meteorological input was from ERA5 data. First, we tested the effect of choosing different sets of biogenic CO2 parameters (Park trees, street trees, forest) for modelling CO2 and heat fluxes. We then upscaled the results by modelling CO2 in the greater Paris area with a 500 m x 500 m resolution. Results of CO2 uptake were also compared to canopy coverage of the grids to see the effect of urban vegetation offsetting the CO2 emissions on a neighborhood scale.
- Open Access
- 28 May 2025
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 8, e148956
Simulating urban biogenic carbon sinks and their sensitivity to environmental conditions
As cities expand, understanding their biogenic CO2 fluxes becomes increasingly critical for sustainable urban planning. Tailored ecosystem models are needed to capture the unique urban characteristics, including altered land surfaces, heterogeneous green spaces, and anthropogenic influences. These models enable the design of sustainable cities and nature-based solutions while also addressing urban ecosystems’ sensitivity to climate stressors such as heatwaves and droughts. The Surface Urban Energy and Water balance Scheme (SUEWS) has been developed to simulate these biogenic CO2 fluxes. Photosynthesis is modelled using maximum photosynthesis rates, seasonally varying leaf area index (LAI), and environmental factors such as air temperature, vapour pressure deficit, soil moisture deficit, and incoming shortwave radiation. Respiration is modelled as a function of air temperature. The 2 m air temperature, LAI, and soil moisture are simulated within SUEWS, while other meteorological inputs, such as incoming shortwave radiation, precipitation, and wind speed, are provided as forcing data. This research builds on a series of studies incorporating in-situ measurements, including eddy covariance (EC) data from urban forests, suburbs, and lawns, sap flow and shoot chamber measurements from street and park trees, and soil chamber measurements. Observations for parameterisation have been primarily gathered in Helsinki and Minneapolis, with model evaluation conducted in cities such as Beijing, Helsinki, Munich, Paris, Swindon, Zürich, and Minneapolis. SUEWS has been applied to spatial simulations for Helsinki at 250×250 m2 resolution, both under current and future climate scenarios. The model has also been implemented in cities like Paris, Munich, and Zürich through the ICOS Cities project. By integrating diverse observational datasets with modelling approaches, this research captures the complexity of urban carbon dynamics and examines how they respond to environmental conditions and climate change.
- 28 May 2025
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 8, e148956
Open AccessSimulating urban biogenic carbon sinks and their sensitivity to environmental conditions
As cities expand, understanding their biogenic CO2 fluxes becomes increasingly critical for sustainable urban planning. Tailored ecosystem models are needed to capture the unique urban characteristics, including altered land surfaces, heterogeneous green spaces, and anthropogenic influences. These models enable the design of sustainable cities and nature-based solutions while also addressing urban ecosystems’ sensitivity to climate stressors such as heatwaves and droughts. The Surface Urban Energy and Water balance Scheme (SUEWS) has been developed to simulate these biogenic CO2 fluxes. Photosynthesis is modelled using maximum photosynthesis rates, seasonally varying leaf area index (LAI), and environmental factors such as air temperature, vapour pressure deficit, soil moisture deficit, and incoming shortwave radiation. Respiration is modelled as a function of air temperature. The 2 m air temperature, LAI, and soil moisture are simulated within SUEWS, while other meteorological inputs, such as incoming shortwave radiation, precipitation, and wind speed, are provided as forcing data. This research builds on a series of studies incorporating in-situ measurements, including eddy covariance (EC) data from urban forests, suburbs, and lawns, sap flow and shoot chamber measurements from street and park trees, and soil chamber measurements. Observations for parameterisation have been primarily gathered in Helsinki and Minneapolis, with model evaluation conducted in cities such as Beijing, Helsinki, Munich, Paris, Swindon, Zürich, and Minneapolis. SUEWS has been applied to spatial simulations for Helsinki at 250×250 m2 resolution, both under current and future climate scenarios. The model has also been implemented in cities like Paris, Munich, and Zürich through the ICOS Cities project. By integrating diverse observational datasets with modelling approaches, this research captures the complexity of urban carbon dynamics and examines how they respond to environmental conditions and climate change.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Hectometric-scale modelling of Parisian green spaces’ cooling capacity
Heat poses a significant risk to human health in cities due to the urban heat island (UHI) effect. Understanding the diverse impacts of heat across different neighbourhoods is essential, as is recognising the potential of urban vegetation to mitigate temperatures. This study focuses on Paris and its green spaces, where the limited observational data make numerical modelling necessary to estimate the cooling capacity of urban green areas.The primary aim of this research is to examine the role of parks and urban forests in reducing air temperatures during the summer. Simulations were carried out for 2022 and 2023 using the Meso-NH model, a non-hydrostatic atmospheric research model. Meso-NH is driven by atmospheric boundary conditions from the French convective-scale operational Numerical Weather Prediction model AROME-France. The model is coupled with the land surface model SURFace EXternalised (SURFEX), which incorporates the Town Energy Balance (TEB) model for urban elements, supported by a high-resolution surface database. The simulations use three nested domains with grid resolutions of 1200 m, 300 m (covering the Paris region), and 100 m (over the city of Paris). Model validation of 2-m air temperature was performed using data from the PANAME intensive measurement campaign.Previous studies have shown, through local observations, that different weather types produce contrasting UHI regimes, leading to varying cooling capacities of parks. This study demonstrates that hectometric-scale modelling successfully replicates these observed patterns. Furthermore, we explore the potential of parks to cool surrounding neighbourhoods under varying turbulent mixing conditions.This research offers valuable insights into the role of urban green spaces in mitigating the urban heat island effect, providing potential strategies to enhance urban resilience against heatwaves.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessHectometric-scale modelling of Parisian green spaces’ cooling capacity
Heat poses a significant risk to human health in cities due to the urban heat island (UHI) effect. Understanding the diverse impacts of heat across different neighbourhoods is essential, as is recognising the potential of urban vegetation to mitigate temperatures. This study focuses on Paris and its green spaces, where the limited observational data make numerical modelling necessary to estimate the cooling capacity of urban green areas.The primary aim of this research is to examine the role of parks and urban forests in reducing air temperatures during the summer. Simulations were carried out for 2022 and 2023 using the Meso-NH model, a non-hydrostatic atmospheric research model. Meso-NH is driven by atmospheric boundary conditions from the French convective-scale operational Numerical Weather Prediction model AROME-France. The model is coupled with the land surface model SURFace EXternalised (SURFEX), which incorporates the Town Energy Balance (TEB) model for urban elements, supported by a high-resolution surface database. The simulations use three nested domains with grid resolutions of 1200 m, 300 m (covering the Paris region), and 100 m (over the city of Paris). Model validation of 2-m air temperature was performed using data from the PANAME intensive measurement campaign.Previous studies have shown, through local observations, that different weather types produce contrasting UHI regimes, leading to varying cooling capacities of parks. This study demonstrates that hectometric-scale modelling successfully replicates these observed patterns. Furthermore, we explore the potential of parks to cool surrounding neighbourhoods under varying turbulent mixing conditions.This research offers valuable insights into the role of urban green spaces in mitigating the urban heat island effect, providing potential strategies to enhance urban resilience against heatwaves.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
High-resolution forecasting models for predicting and capturing heat exposure contrasts in the Paris region
The intensity and spatial extent of urban heat island fluctuates nightly, resulting in variable heat exposure across neighbourhoods. During heatwaves, this variability can significantly affect the degree of temperature exposure experienced by different communities. To accurately evaluate the health impacts of heatwaves, it is essential to account for both the spatial distribution of heat exposure and the socioeconomic factors influencing vulnerability.The French heat warning system relies on alert thresholds being exceeded at a reference weather station in each department (administrative division). This applies to the eight departments in the Paris region, with contrasts in the representativeness of the station in terms of the exposure conditions for the 12.3 million inhabitants (depending on department size and variability of the surface properties). In particular, the city of Paris uses a reference station located in a park, which may not adequately reflect the detailed spatial variability of urban heat exposure. Numerical weather prediction (NWP) models, such as AROME-France at 1.3 km resolution, represent the current operational status for weather forecasting and have potential as early warning tools for heatwaves, not only at the regional scale but also at the neighbourhood level.In this study, we compare AROME-France with two higher-resolution models: AROME-500m, which includes enhanced urban representation, and Meso-NH, a research model with 300 m resolution and the most detailed urban parameterisation. By analysing the summers of 2022 and 2023 in the Paris region, we investigate whether numerical models with different levels of detail better reflect population heat exposure than sparse observations. These findings would highlight both the limitations and the potential of current models for further improving heatwave risk assessments.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessHigh-resolution forecasting models for predicting and capturing heat exposure contrasts in the Paris region
The intensity and spatial extent of urban heat island fluctuates nightly, resulting in variable heat exposure across neighbourhoods. During heatwaves, this variability can significantly affect the degree of temperature exposure experienced by different communities. To accurately evaluate the health impacts of heatwaves, it is essential to account for both the spatial distribution of heat exposure and the socioeconomic factors influencing vulnerability.The French heat warning system relies on alert thresholds being exceeded at a reference weather station in each department (administrative division). This applies to the eight departments in the Paris region, with contrasts in the representativeness of the station in terms of the exposure conditions for the 12.3 million inhabitants (depending on department size and variability of the surface properties). In particular, the city of Paris uses a reference station located in a park, which may not adequately reflect the detailed spatial variability of urban heat exposure. Numerical weather prediction (NWP) models, such as AROME-France at 1.3 km resolution, represent the current operational status for weather forecasting and have potential as early warning tools for heatwaves, not only at the regional scale but also at the neighbourhood level.In this study, we compare AROME-France with two higher-resolution models: AROME-500m, which includes enhanced urban representation, and Meso-NH, a research model with 300 m resolution and the most detailed urban parameterisation. By analysing the summers of 2022 and 2023 in the Paris region, we investigate whether numerical models with different levels of detail better reflect population heat exposure than sparse observations. These findings would highlight both the limitations and the potential of current models for further improving heatwave risk assessments.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Utilizing urban land surface model SUEWS to estimate effects of green infrastructures to carbon and heat balances in Zürich, Switzerland
As cities face the drastic effects of climate change, they must simultaneously focus on reducing carbon dioxide (CO2) emissions, mitigating these emissions, and adapting to the changes. Green urban infrastructures hold an important role in both mitigation and adaptation. Green spaces, such as parks and street trees, act as carbon dioxide sinks and contribute to carbon storage while providing cooling effects through shading and transpiration. In this study, the urban land surface model SUEWS (Surface Urban Energy and Water balance Scheme) is used in the city of Zürich, Switzerland, to study the combined effect of urban green infrastructures in a spatial scale and to explore how these effects vary across the city based on canopy coverage. The model can jointly simulate water, CO2 and heat exchanges, and requires meteorological information and surface cover related parameters as input. The study covers the period from July 2022 to June 2023, with the first half of 2022 serving as the spin-up period. To evaluate the model's performance, eddy covariance (EC) measurements of CO2, latent and sensible heat flux were recorded at the 111-meter-tall Hardau II tower. The ICOS Cities rooftop temperature sensor network was used to assess simulated temperature variations. Results show that the forests surrounding the city are the most prominent CO2 sinks, but in the city center urban parks also act as sinks. The latent heat flux is the largest in the vegetated areas and sensible heat flux in the built-up parts. The area surrounding the EC tower is highly influenced by the anthropogenic emissions, making it challenging to discern the sinks of urban green vegetation in the model and the measurements. The model is able to catch the variations in temperature at different locations in the city. The results will be evaluated against canopy coverage of the city.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessUtilizing urban land surface model SUEWS to estimate effects of green infrastructures to carbon and heat balances in Zürich, Switzerland
As cities face the drastic effects of climate change, they must simultaneously focus on reducing carbon dioxide (CO2) emissions, mitigating these emissions, and adapting to the changes. Green urban infrastructures hold an important role in both mitigation and adaptation. Green spaces, such as parks and street trees, act as carbon dioxide sinks and contribute to carbon storage while providing cooling effects through shading and transpiration. In this study, the urban land surface model SUEWS (Surface Urban Energy and Water balance Scheme) is used in the city of Zürich, Switzerland, to study the combined effect of urban green infrastructures in a spatial scale and to explore how these effects vary across the city based on canopy coverage. The model can jointly simulate water, CO2 and heat exchanges, and requires meteorological information and surface cover related parameters as input. The study covers the period from July 2022 to June 2023, with the first half of 2022 serving as the spin-up period. To evaluate the model's performance, eddy covariance (EC) measurements of CO2, latent and sensible heat flux were recorded at the 111-meter-tall Hardau II tower. The ICOS Cities rooftop temperature sensor network was used to assess simulated temperature variations. Results show that the forests surrounding the city are the most prominent CO2 sinks, but in the city center urban parks also act as sinks. The latent heat flux is the largest in the vegetated areas and sensible heat flux in the built-up parts. The area surrounding the EC tower is highly influenced by the anthropogenic emissions, making it challenging to discern the sinks of urban green vegetation in the model and the measurements. The model is able to catch the variations in temperature at different locations in the city. The results will be evaluated against canopy coverage of the city.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Advancing our understanding on the climate mitigation potential of urban green infrastructure
Nature based solutions have a critical role in climate mitigation and adaptation in cities. Recently, urban vegetation has gained attention in cities’ climate action plans as a vital strategy for enhancing carbon sequestration from the atmosphere. To support the cities, a detailed knowledge of the strength and variability of urban biogenic carbon sinks and their dependencies on environmental conditions in changing climate is critical. In this study we harness the intensive eco-physiological observations made in parks, gardens, forests and street trees in the Helsinki in 2020—2022 and land surface modelling (LSM) to examine our current capabilities in simulating urban biogenic carbon sinks and the magnitude and variability of these sinks in different urban vegetation types and in changing climate.We see how different urban green infrastructure types, from urban forests to lawns, can act as carbon sinks. The three tested LSMs (JSBACH, LPJ-GUESS and SUEWS) effectively simulated seasonal and annual variations, as well as the impacts of weather events on carbon fluxes and related factors in both irrigated and non-irrigated lawns, park trees, and urban forests. Irrigation as key management practise emerged as a key factor often improving carbon sequestration. Tree-covered areas demonstrated greater carbon sequestration rates compared with lawns on an annual scale. Meadows are not better carbon sinks than lawns under typical summer conditions, but their drought resilience is better maintaining their capacity to uptake carbon also during drier periods contrary to lawns. In Helsinki, the city-level biogenic carbon sinks are expected to increase with climate change by 11% mainly due to the longer growing season whereas carbon sinks in forested areas decreased due to increased environmental stress. This research emphasizes the importance of integrating diverse vegetation types and impacts of irrigation into urban carbon modelling efforts to inform sustainable urban planning and climate change mitigation strategies.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessAdvancing our understanding on the climate mitigation potential of urban green infrastructure
Nature based solutions have a critical role in climate mitigation and adaptation in cities. Recently, urban vegetation has gained attention in cities’ climate action plans as a vital strategy for enhancing carbon sequestration from the atmosphere. To support the cities, a detailed knowledge of the strength and variability of urban biogenic carbon sinks and their dependencies on environmental conditions in changing climate is critical. In this study we harness the intensive eco-physiological observations made in parks, gardens, forests and street trees in the Helsinki in 2020—2022 and land surface modelling (LSM) to examine our current capabilities in simulating urban biogenic carbon sinks and the magnitude and variability of these sinks in different urban vegetation types and in changing climate.We see how different urban green infrastructure types, from urban forests to lawns, can act as carbon sinks. The three tested LSMs (JSBACH, LPJ-GUESS and SUEWS) effectively simulated seasonal and annual variations, as well as the impacts of weather events on carbon fluxes and related factors in both irrigated and non-irrigated lawns, park trees, and urban forests. Irrigation as key management practise emerged as a key factor often improving carbon sequestration. Tree-covered areas demonstrated greater carbon sequestration rates compared with lawns on an annual scale. Meadows are not better carbon sinks than lawns under typical summer conditions, but their drought resilience is better maintaining their capacity to uptake carbon also during drier periods contrary to lawns. In Helsinki, the city-level biogenic carbon sinks are expected to increase with climate change by 11% mainly due to the longer growing season whereas carbon sinks in forested areas decreased due to increased environmental stress. This research emphasizes the importance of integrating diverse vegetation types and impacts of irrigation into urban carbon modelling efforts to inform sustainable urban planning and climate change mitigation strategies.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Investigation of urban park cooling efficiency during summer inParis with drones, sondes, and ground measurements
Greening cities is one solution that local authorities are using in order to reduce residents' exposure to heat, which is a major public health issue for urban populations. Urban green spaces, known to be cool spots, are an integral part of local adaptation strategies. For example, Paris' 2024-2030 Climate Plan aims to create 300 ha of additional green space by 2050. Detailed knowledge of green spaces cooling potential and variability factors likely to influence it is needed to plan effective adaptation strategies. This is one of the aims of the PANAME measurement campaign in which an experimental set-up combining in situ surface measurements and vertical profiling of the surface layer using quadcopter drones and soundings has been deployed to measure meteorological variables in five contrasting parisian green spaces and their surrounding built-up areas along summer 2023.The night-time near-surface cooling capacity of the green spaces relative to their surrounding built-up area has been calculated for different nocturnal vertical turbulent mixing in the urban canopy layer. For nights of low turbulent mixing, often associated with the highest daily temperatures, urban parks cool by several degrees compared with built-up areas, with differences depending on their size and vegetation. A small wooded garden square has a greater cooling capacity than a large grassy esplanade, illustrating the importance of tree cover, even for parks of less than 1 ha, in adapting cities.For low turbulent mixing nights, the park cooling also often extends vertically over several tens of meters, where a local inversion is found. This stable park layer is not vertically constrained by the buildings surrounding the green space as it can possibly extend higher. It is also only little influenced by the green space size as it is found similarly above urban park of 15ha and garden square of less than 1ha.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessInvestigation of urban park cooling efficiency during summer inParis with drones, sondes, and ground measurements
Greening cities is one solution that local authorities are using in order to reduce residents' exposure to heat, which is a major public health issue for urban populations. Urban green spaces, known to be cool spots, are an integral part of local adaptation strategies. For example, Paris' 2024-2030 Climate Plan aims to create 300 ha of additional green space by 2050. Detailed knowledge of green spaces cooling potential and variability factors likely to influence it is needed to plan effective adaptation strategies. This is one of the aims of the PANAME measurement campaign in which an experimental set-up combining in situ surface measurements and vertical profiling of the surface layer using quadcopter drones and soundings has been deployed to measure meteorological variables in five contrasting parisian green spaces and their surrounding built-up areas along summer 2023.The night-time near-surface cooling capacity of the green spaces relative to their surrounding built-up area has been calculated for different nocturnal vertical turbulent mixing in the urban canopy layer. For nights of low turbulent mixing, often associated with the highest daily temperatures, urban parks cool by several degrees compared with built-up areas, with differences depending on their size and vegetation. A small wooded garden square has a greater cooling capacity than a large grassy esplanade, illustrating the importance of tree cover, even for parks of less than 1 ha, in adapting cities.For low turbulent mixing nights, the park cooling also often extends vertically over several tens of meters, where a local inversion is found. This stable park layer is not vertically constrained by the buildings surrounding the green space as it can possibly extend higher. It is also only little influenced by the green space size as it is found similarly above urban park of 15ha and garden square of less than 1ha.
- Open Access
- 5 May 2025
- Published by Copernicus GmbH in Biogeosciences
- Vol. 22 (9) , 2133-2161
Intercomparison of biogenic CO 2 flux models in four urban parks in the city of Zurich
Quantifying the capacity and dynamics of urban carbon dioxide (CO2) emissions and carbon sequestration is becoming increasingly relevant in the development of integrated monitoring systems for urban greenhouse gas (GHG) emissions. There are multiple challenges in achieving these goals, such as the partitioning of atmospheric measurements of CO2 fluxes to anthropogenic and biospheric processes, the insufficient understanding of urban biospheric processes, and the applicability of existing biosphere models to urban systems. In this study, we applied four biosphere models of varying complexity – diFUME, JSBACH, SUEWS, VPRM – in four urban parks in the city of Zurich and evaluated their performance against in situ measurements collected over almost 2 years on park trees and lawns. In addition, we performed an uncertainty analysis of gross primary productivity (GPP), ecosystem respiration (Reco), and net ecosystem exchange (NEE) of CO2 based on the differences between the estimates of the four models and compared the estimated uncertainties and biospheric fluxes with the monthly anthropogenic CO2 emissions of a wide urban area surrounding the four parks. The results showed that, despite the large differences in model architecture, there was considerable agreement in the seasonal and diurnal GPP, Reco, and NEE estimates. Larger discrepancies between the four models were found for lawn GPP compared to tree GPP, while, for Reco, the differences between lawns and tree areas were similar. On an annual scale, all models agreed, on average, that lawns acted as CO2 sources and tree-covered areas as CO2 sinks during the simulation period, with the exception of diFUME, which simulated both tree and lawn areas as CO2 sources. diFUME and VPRM were more accurate in capturing the onset of the tree leaf growth in spring compared to JSBACH and SUEWS. On the other hand, JSBACH and SUEWS simulated soil water availability more accurately than the satellite-derived water index used by VPRM. The in situ observations revealed a very high spatial variability in lawn Reco across the park areas. All models underestimated the lawn Reco during spring in mowed, sunny locations, whereas the model simulations were closer to the observed Reco in un-mowed, partially shaded locations. The mean monthly uncertainties in biogenic NEE reached 0.8 , which is 10.2 % of the magnitude of the total CO2 balance over the studied area during the month of June. This balance was composed of a mean anthropogenic flux of 8.7 and a mean biospheric flux of −0.5 . Overall, this study highlights the importance of properly accounting for the biogenic CO2 fluxes and their uncertainties in urban CO2 balance studies, especially during the vegetation growing season, and shows that even simple models, such as VPRM, can adequately simulate the urban biospheric fluxes when appropriately parameterized.- 5 May 2025
- Published by Copernicus GmbH in Biogeosciences
- Vol. 22 (9) , 2133-2161
Open AccessIntercomparison of biogenic CO 2 flux models in four urban parks in the city of Zurich
Quantifying the capacity and dynamics of urban carbon dioxide (CO2) emissions and carbon sequestration is becoming increasingly relevant in the development of integrated monitoring systems for urban greenhouse gas (GHG) emissions. There are multiple challenges in achieving these goals, such as the partitioning of atmospheric measurements of CO2 fluxes to anthropogenic and biospheric processes, the insufficient understanding of urban biospheric processes, and the applicability of existing biosphere models to urban systems. In this study, we applied four biosphere models of varying complexity – diFUME, JSBACH, SUEWS, VPRM – in four urban parks in the city of Zurich and evaluated their performance against in situ measurements collected over almost 2 years on park trees and lawns. In addition, we performed an uncertainty analysis of gross primary productivity (GPP), ecosystem respiration (Reco), and net ecosystem exchange (NEE) of CO2 based on the differences between the estimates of the four models and compared the estimated uncertainties and biospheric fluxes with the monthly anthropogenic CO2 emissions of a wide urban area surrounding the four parks. The results showed that, despite the large differences in model architecture, there was considerable agreement in the seasonal and diurnal GPP, Reco, and NEE estimates. Larger discrepancies between the four models were found for lawn GPP compared to tree GPP, while, for Reco, the differences between lawns and tree areas were similar. On an annual scale, all models agreed, on average, that lawns acted as CO2 sources and tree-covered areas as CO2 sinks during the simulation period, with the exception of diFUME, which simulated both tree and lawn areas as CO2 sources. diFUME and VPRM were more accurate in capturing the onset of the tree leaf growth in spring compared to JSBACH and SUEWS. On the other hand, JSBACH and SUEWS simulated soil water availability more accurately than the satellite-derived water index used by VPRM. The in situ observations revealed a very high spatial variability in lawn Reco across the park areas. All models underestimated the lawn Reco during spring in mowed, sunny locations, whereas the model simulations were closer to the observed Reco in un-mowed, partially shaded locations. The mean monthly uncertainties in biogenic NEE reached 0.8 , which is 10.2 % of the magnitude of the total CO2 balance over the studied area during the month of June. This balance was composed of a mean anthropogenic flux of 8.7 and a mean biospheric flux of −0.5 . Overall, this study highlights the importance of properly accounting for the biogenic CO2 fluxes and their uncertainties in urban CO2 balance studies, especially during the vegetation growing season, and shows that even simple models, such as VPRM, can adequately simulate the urban biospheric fluxes when appropriately parameterized.