ZCZe Chen

Ze Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ze Chen has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Molecular dynamics simulation of migration and mechanism transition of 1/2 dislocation loops in tungsten

    by Zhaofan Wang, Chao Yin, Qi Xiong, Zhe Liu, Ze Chen, Shifeng Mao, Minyou Ye

  • Hydrogen isotope retention behavior in WTaCrV multi-component alloy

    by Na Zhang, Ze Chen, Chao Yin, Zeshi Gao, Caiyong Xiong, Zhe Liu, Shifeng Mao, Minyou Ye

  • Open Access

    Simulation of fuzz formation on tungsten surface and its impact on sputtering and hydrogen retention by MD-MC hybrid method

    by Zhengyang Ming, Ze Chen, Qi Xiong, Zhaofan Wang, Zhe Liu, Chao Yin, Shifeng Mao, Shin Kajita, Minyou Ye

    Tungsten (W) is considered the primary material for the divertor and first wall in future fusion reactors. Under the irradiation of helium (He) plasma, a porous layer named ‘fuzz’ forms on W surface, accompanied by changes in its physical properties. In this paper, the early stage of fuzz is constructed using a molecular dynamics (MD) and Monte Carlo (MC) hybrid method. It provides a more physically realistic structure by allowing the nanostructure to emerge naturally from the interplay of atomic-scale processes. The generated fuzz structures are subsequently employed to evaluate the changes in surface properties, including both sputtering and hydrogen (H) permeation/retention. Simulation results show that the fuzz layer ceases to grow once it reaches a certain thickness. Further analysis indicates that the formation of fuzz structure can suppress the diffusion and accumulation of He from the surface to bulk material. The simulation results also indicate that higher ion energy results in greater He retention, which consequently leads to an increase in the porosity of the fuzz layer. Simulations of He atoms cascades show that, although the energy directly transferred from He atoms (<100 eV) to W atoms is lower than the sputtering threshold energy (∼8.9 eV), W surface modifications and sputtering can still occur via adatoms formation. Compared with flat W surface, fuzzy surface tends to recapture the sputtering W atoms, exhibiting lower net sputtering yield under the same He irradiation conditions. The bombardment by He atoms can also promote the curling of fuzz structures, which may subsequently influence W surface diffusion. Finally, the He–H hybrid simulations indicate that the formation of fuzz structure significantly suppresses the H permeation and retention in the W bulk area and enhances H retention on W surface.

  • Open Access

    Crossover from sluggish to accelerated diffusion in multi-principal element alloys induced by lattice distortion

    by Baichuan Xu, Shasha Huang, Wenyu Lu, Ze Chen, Ailin Yang, Haijun Fu, Qiyong Chen, Kangming Li, Shijun Zhao


  • Open Access

    Mechanical properties of tungsten foil after exposure to Deuterium at high temperature

    by Yangyang Li, Chao Yin, Zhe Liu, Ze Chen, Shifeng Mao, Minyou Ye

    Tungsten foil shows potential to be implemented in the first wall and divertor of fusion devices as laminates, but may face issues like hydrogen isotope retention, either from plasma or neutron-induced transmutation, causing mechanical degradation. This study regulates the microstructure of tungsten foil via heat treatment and investigates Deuterium (D) retention and mechanical behavior through thermal desorption spectroscopy (TDS) and small punch testing (SPT), respectively. Results show that the D retention decreases with the reduction of high-angle grain boundaries (HAGBs) and dislocation density. This suggests that HAGBs and dislocations are the main D-trapping defects. SPT results indicate that the decrease in HAGB density weakens the inhibitory effect on crack propagation and reduces ductility, leading to embrittlement. Further studies reveal that D retention does not induce embrittlement. Instead, annealing during D charging decreases the geometrically necessary dislocation (GND) and low-angle grain boundary (LAGB) densities and may trigger sulfur (S) impurity precipitation, which synergistically induces embrittlement.

  • Open Access

    The effect of W surface fuzz induced by He plasma on deuterium permeation

    by Long Li, Ze Chen, Zhe Liu, Zeshi Gao, Na Zhang, Yangyang Li, Chao Yin, Shifeng Mao, Hirohiko Tanaka, Noriyasu Ohno, et al.

    The permeation and retention of hydrogen isotopes in nuclear materials is critical to issues such as hydrogen embrittlement, tritium self-sufficiency, and radioactive safety in fusion reactors. Tungsten, the primary candidate for plasma-facing materials, undergoes high-flux helium plasma irradiation in fusion devices that may alter hydrogen isotope behaviors. However, few works have focused on the effects of helium plasma–induced surface modification on hydrogen permeation. This study investigates the effects of helium-induced surface fuzz structure on deuterium permeation through tungsten. Our findings indicate that the surface fuzz structure can significantly enhance deuterium permeation through tungsten, with the degree of enhancement positively correlated to both the thickness of the fuzz structure and the permeation temperature. In addition, as the temperature decreases, the contribution of the tungsten oxide layer covering the nanotendrils that hinder deuterium diffusion gradually becomes stronger, resulting in the weakening of the overall permeation enhancement. The influence of the fuzz characteristics on deuterium transport properties is discussed. This work implies that helium plasma–induced surface modification can considerably the deuterium transport behaviors in tungsten.


  • Deuterium gas-driven permeation and retention in ZrC dispersion-strengthened W and pure W

    by Long Li, Ze Chen, Zeshi Gao, Yangyang Li, Zhe Liu, Wenyu Lin, Chao Yin, Shifeng Mao, Xudi Wang, Minyou Ye


  • Open Access

    A method to obtain the trapping energy and trapping range between hydrogen and defects at finite temperature

    by Zhengyang Ming, Ze Chen, Zhaofan Wang, Chao Yin, Shifeng Mao, Minyou Ye

    The binding energy between hydrogen (H) and defects in solid phase materials has been widely studied, which is of vital importance to understand the H retention effects and defect growth mechanisms. However, present studies of binding energy through density functional theory (DFT) or the molecular statics (MS) method were usually performed at 0 K, which could not take the influence of entropy into consideration. In this work, a thermodynamic method has been proposed to obtain the trapping energy between H and defects at finite temperatures. The method is based on the rate theory, which uses trapping energy (V) and trapping range (δ) to describe the trapping properties of defects. Ultimately, a parameterized H spatial cumulative distribution function at thermodynamic equilibrium state could be given. The trapping energy and trapping range parameters in the function can be determined by contrast with the results obtained from molecular dynamics or other methods. This method has been applied to calculate the trapping energies and trapping ranges of H to helium bubble and grain boundary, respectively. Further discussion has been made on the discrepancy between trapping energies obtained by this method and the conventional DFT/MS method.


  • Open Access

    Surface modification of ZrC dispersion-strengthened W under low energy He plasma irradiation

    by Long Li, Zhe Liu, Ze Chen, Chao Yin, Shifeng Mao, Xuebang Wu, Noriyasu Ohno, Minyou Ye

    ZrC dispersion-strengthened W exhibits high strength/ductility, low ductile-to-brittle transition temperature, and excellent thermal shock resistance, making it a promising candidate plasma-facing material for future fusion devices. In this study, surface modification of 0.5 wt.% ZrC dispersion-strengthened W (WZrC) under low energy and high fluence He plasma irradiation at high temperature was presented. Under the energy of 90 eV and fluence ranging from 6 × 1024 He·m−2–2 × 1026 He·m−2 He irradiation at 920 °C, a typical fuzz nanostructure appeared on the W matrix of WZrC. The thickness of fuzz layer is proportional to the square root of He irradiation fluence. The fuzz showed comparable thickness and structural features to pure W, indicating limited effects of the particle’s addition on resistance to high fluence He irradiation at high temperatures. Under continuous He injection, the fuzz would grow extending onto the particle area, making the particle obscured. Besides, the erosion behavior of particles under He plasma irradiation has been investigated, which is thought to be dominated by a sputtering process. Under the He influence of 6 × 1024 He·m−2, only nanopores were observed in the surface region. With fluence increasing to 5 × 1025 He·m−2, the surface became relatively uneven with larger holes. W aggregated in spots and distributed on the surface of the particle, which might be the result of subthreshold sputtering and deposition. When fluence further increased to 2 × 1026 He·m−2, the particles were eroded completely and covered by the extended fuzz, forming cavities. In addition, distinctive layered nanotendrils were observed above the cavities, which were characterized to consist of inner W-riched skeletons and outer Zr-riched layers. It indicates that the layered nanotendrils should be the result of fuzz extension combined with particle sputtering/deposition.


  • Nanopatterning of Si surfaces by normal incident He plasma irradiation

    by Zhe Liu, Long Li, Zeshi Gao, Ze Chen, Chao Yin, Shifeng Mao, Shin Kajita, Noriyasu Ohno, Minyou Ye

    This study reports on the formation of self-organized silicon (Si) nanostructures by 75 eV helium (He) plasma irradiation at normal incidence without the presence of impurities. In contrast to the featureless surface after normal incidence argon (Ar) ion beam irradiation without the co-deposition of impurities, the Si surface exhibits the development of faceted nanostructures under 75 eV He plasma irradiation. The faceted structures are interspersed with valleys that extend in two orthogonal directions, imparting a mountain-like morphology to the surface. Our investigation verifies that the He bubbles align themselves along the direction perpendicular to the surface underneath these valleys. Furthermore, the presence of He bubbles induces distortion in the surface layer and leads to the formation of an amorphous Si layer. The underlying mechanism driving this surface evolution could be attributed to the instability induced by the presence of He bubbles.