CMChaojun Ma

Chaojun Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chaojun Ma has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wideband Millimeter-Wave Co-Linearly Polarized In-Band Full-Duplex Open-Ended Waveguide Antenna

    by Chao Jun Ma, Rong Rong Qian, Shao Yong Zheng, Yong Mei Pan

    In this paper, a novel self-decoupled method implemented by the propagation modes cancellation of a rectangular waveguide is proposed for wideband and high-isolation-level co-linearly polarized in-band full-duplex antennas. This antenna comprises an enlarged open-ended rectangular waveguide serving as a radiator, and two integrated feeding waveguides that connect to the TX and RX channels, respectively. When the antenna operates, the TE01, TE11, and TM11 modes of the open-ended waveguide are simultaneously excited and superposed within the waveguide, generating a weak-field region near the RX port. In this way, the mutual coupling between the TX and RX channels can be effectively suppressed. Since these modes are propagation modes, they persistently coexist once the operating frequency exceeds their cutoff frequencies, thereby enabling wideband performance. Besides, two tapering ridges are employed in the open-ended waveguide to maintain a stable high in-band isolation level. They can adjust the propagation constants of the three modes to synchronize them, thereby achieving better cancellation effects. This antenna is fabricated and measured. The measurement reveals that the antenna achieves a bandwidth of 51%, with an in-band isolation level exceeding 30 dB, thereby providing a good trade-off between bandwidth and isolation level. Moreover, the open-ended waveguide can be extended into different horn shapes to meet different gain requirements, demonstrating good scalability.


  • Millimeter-Wave Co-Polarized In-Band Full-Duplex Antenna Based on a Mode Superposition Method

    by Chao Jun Ma, Shao Yong Zheng, Yong Mei Pan

    In this paper, a novel mode superposition method is proposed to implement a millimeter-wave shared-radiator co-polarized in-band full-duplex (IBFD) antenna at 29 GHz. The proposed method is realized based on a dielectric resonator antenna (DRA). By simultaneously exciting the TM 01δ and HEM 21δ modes of a DRA, a superposed mode with a field pattern analogous to the TE 211 mode can be produced. Since both the transmitter and the receiver ports locate at the weak-field regions of the superposed mode, a decoupling performance is therefore obtained without the use of any additional decoupling structures or circuits. For validation, a DRA with artificial electromagnetic boundaries is employed so that the TM 01δ and HEM 21δ modes can be simultaneously excited using a simple microstrip proximity coupling. It only needs to properly adjust the geometric parameters of the DRA, the mutual coupling is substantially suppressed. The experiment demonstrates that the antenna can achieve maximum isolation of 42 dB and peak gain of 8.65 dBi. Thanks to the simple and integrated architecture, the proposed method is promising for millimeter-wave IBFD applications.


  • A Microwave/Millimeter-Wave Shared-Aperture Antenna Based on Slow-Wave Parallel-Plate Waveguide

    by Chao Jun Ma, Yong Mei Pan, Xiang Yu Meng, Shao Yong Zheng

    Since the coexistence of microwave (MW) and millimeter-wave (MMW) technologies have become the inexorable trend of emerging wireless communication systems, the corresponding antennas are required to support two frequency bands simultaneously. However, the existing MW/MMW shared-aperture antennas are facing challenges in dealing with the interference between two bands and implementing beam steering at both bands. To address these issues, a windowed slow-wave parallel-plate waveguide (WSW-PPW) is proposed as the sharing platform, on which MW and MMW antenna elements can be flexibly arranged. WSW-PPW is implemented by embedding electromagnetic bandgap (EBG) structures into a dual-layer printed parallel-plate waveguide. At the MW band, WSW-PPW exhibits a transmission feature for feeding and also integrating MW antenna elements. At the MMW band, WSW-PPW rejects the propagation of electromagnetic waves and functions as artificial magnetic boundaries for dielectric resonator antennas which are realized by removing subarrays of EBG structures. For demonstration, an MW/MMW shared-aperture antenna is implemented by integrating a 1 × 2 MW patch array and a 1 × 8 MMW array on this platform. Steerable beams had been independently achieved at both bands. The antenna is fabricated and experimentally verified. The measured results show a reasonable agreement with simulations.


  • A Miniaturized Planar Multibeam Antenna for Millimeter-Wave Vehicular Communication

    by Chao Jun Ma, Bing Jie Xiang, Shao Yong Zheng, Yong Mei Pan

    Existing millimeter-wave beamforming network-based multibeam antennas usually suffer from complex configuration and bulky size, which limit their applications on a vehicle. To address these issues, in this paper, a symmetrical series-fed array topology is proposed for eliminating the conventional beamforming network. The topology is constructed by applying two unequal main transmission lines (TLs) to symmetrically feed a linear antenna array in series. To effectively suppress the mutual coupling between two TLs, an antenna element exhibiting co-polarized in-band full-duplex performance is implemented. When the four terminals are excited, respectively, four groups of excitation signals with different phase differences will be delivered to antennas to implement the desired beam steering characteristics. For validation, an antenna array operating at 28 GHz is designed, fabricated, and measured. Thanks to the simplicity of topology, the overall size of the proposed multibeam antenna is only 5.57 λ 2 with a radiation efficiency of 85.6%. Meanwhile, a comparable performance is obtained when compared to a conventional beamforming network-based multibeam antenna. All of these results demonstrate the potential of the proposed topology in miniaturized millimeter-wave vehicular communication.


  • An Optimization Design of the Iron-core Coil Sensor for High-frequency Current Signals

    by Lei Zhou, Yang Jiao, Hui Gong, Hongbin Li, Chaojun Ma, Chuanji Zhang

    In a wide range of electrical applications, an accurate measurement of the high-frequency current signal is urgently required. Owing to inherent superiorities, iron-core coils have been widely applied to the measurement of high-frequency current signals. Nevertheless, the uneven winding, bandwidth-sensitivity exclusion, and partial resonances have restrict better high-frequency characteristics. To address the issues, an optimization design is proposed in this paper, and it includes three key improvements: the Core-PCB hybrid structure, staggered secondary winding, and distributed sampling resistances, which respectively contribute to better uniformity of winding, smaller stray capacitances, and effective suppression on partial resonances. Moreover, simulations and tests are conducted, and the results verify the validity.

  • Millimeter-Wave Fully Integrated Dielectric Resonator Antenna and Its Multi-Beam Application

    by Chaojun Ma, Shao Yong Zheng, Yong Mei Pan, Zhe Chen

    To address the issues of the inconvenient fabrication and integration for millimeter-wave (MMW) dielectric resonator antennas (DRAs), a new configuration is proposed. First, a dielectric resonator with artificial electromagnetic boundaries is implemented by introducing the electromagnetic band-gap structure along the four side-wall boundaries of a certain dielectric region on a printed circuit board. The electromagnetic bandgap (EBG) structure is constructed using a printed array of periodic upside-down mushroom-type unit cells. The resonant-mode analysis reveals that the proposed DR can support conventional dielectric resonator modes and dense dielectric patch (DDP) cavity modes simultaneously. To excite the DR, a substrate-integrated gap waveguide transmission line is embedded in the proposed structure for implementing a fully integrated DRA. For demonstration, a fully integrated dielectric resonator antenna (FIDRA) operating at 31 GHz is designed. Simulated results show that the antenna offers an 11.5% −10 dB impedance bandwidth (29.6 to 33.2 GHz), in which a peak gain of 7.85 dBi is obtained. As an extension, a multi-beam antenna array composed of a $1 \times 4$ FIDRA antenna array and a SIGW $4 \times 4$ Butler matrix is designed and fabricated. The experimental results verified the effectiveness of the proposed configuration in integrating the DRA and feeding network.


  • Millimeter-Wave Circularly Polarized Array Antenna Using Substrate-Integrated Gap Waveguide Sequentially Rotating Phase Feed

    by Chaojun Ma, Zu-Hui Ma, Xiupu Zhang

    A substrate-integrated gap waveguide (SIGW) sequentially rotating phase (SRP)-fed 2 × 2 circularly polarized (CP) patch antenna array is presented for the wideband millimeter-wave application. The antenna element is composed of a truncated square patch, SIGW feedline with three layers of printed circuit board (PCB), and another layer of PCB with an air hole for supporting radiation patch. Each radiation patch is driven by an underneath coupling slot etched on SIGW. A wide axial-ratio (AR) bandwidth is achieved by deploying a 2 × 2 SIGW SRP feed network. Moreover, simple calculation expressions of the characteristic impedance and guide wavelength of SIGW are given for the design of SRP feed network. The fabricated prototype shows an impedance bandwidth of 25.6% covering 22.2-28.8 GHz, 3 dB AR bandwidth of 19% from 22.8 to 27.6 GHz, and peak gain of 11.53 dBic.


  • A Low-Profile Substrate-Integrated-Gap-Waveguide- Fed Magnetoelectric Dipole

    by Dongya Shen, Chaojun Ma, Wenping Ren, Xiupu Zhang, Zuhui Ma, Rongrong Qian

    At this work, we propose a magneto-electric (ME) dipole antenna with characteristics of low profile, easy integration, wide band and high gain. The ME dipole is composed of rectangular patches and metallic via holes, and is embedded in a square aperture etched on substrate integrated gap waveguide (SIGW). In particular, the ME dipole is fed by a coplanar strip line (CPS), which is designed in SIGW to realize a low profile of 0.19λg (λg is the guide-wavelength at center frequency). The measurements show that the 10-dB impedance bandwidth of the antenna is 29%, ranging from 22.4 to 30 GHz, with mean gain of 8.04 dBi. Furthermore, the proposed antenna emits a stable radiation pattern within the operating frequency band, validated by the far-field measurements.


  • A slotted dielectric substrate loaded broadband Vivaldi antenna fed by SIW

    by Chaojun Ma, Dongya Shen, Ming Dong, Jun Su

    A novel compact slotted dielectric substrate loaded broadband Vivaldi antenna is proposed. This antenna consists of a typical antipodal SIW Vivaldi antenna and two pieces of FR4 substrate with uneven thickness and periodic slots, two pieces of FR4 substrate is symmetrically loaded on Vivaldi antenna above and under respectively. The effects of different thickness distribution and slots on substrate were simulated. Simulated results exhibit that the antenna achieves a gain of 10.1 ± 0.7 dBi over the frequency of 27-45GHz with reflection coefficient less than -14dB.