Zhongjun Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhongjun Hu has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Yanjun Zhang
College of Construction Engineering, Jilin University, Changchun 130026, China
5 shared publications Boxin Wang
4 shared publicationsYan Xu
4 shared publicationsJunhong Zhou
3 shared publicationsKang Zhao
3 shared publications- Yibin Huang
College of construction Engineering,Jilin University,Changchun 130026,China)
3 shared publications
Latest Publications
- 3 June 2025
- Published by Elsevier in Structures
- Vol. 78
A modified stress-strain model for CFRP-repaired heat-damaged concrete
- 3 June 2025
- Published by Elsevier in Structures
- Vol. 78
A modified stress-strain model for CFRP-repaired heat-damaged concrete
- 15 November 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 81
Experimental investigation of CFRP-confined partially encased composite columns under axial compression
- 15 November 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 81
Experimental investigation of CFRP-confined partially encased composite columns under axial compression
- 11 November 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (22) , 1-12
The mechanism of mudstone skin friction of large-diameter and long piles based on the pile test of the Longhua Songhua River Bridge in Jilin Province, China
- 11 November 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (22) , 1-12
The mechanism of mudstone skin friction of large-diameter and long piles based on the pile test of the Longhua Songhua River Bridge in Jilin Province, China
- 1 September 2021
- Published by Elsevier in Geothermics
- Vol. 95, 102163
Experimental and numerical investigation of seepage and heat transfer in rough single fracture for thermal reservoir
- 1 September 2021
- Published by Elsevier in Geothermics
- Vol. 95, 102163
Experimental and numerical investigation of seepage and heat transfer in rough single fracture for thermal reservoir
- Open Access
- 27 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (9) , 3968
Experimental Study on Slender CFRP-Confined Circular RC Columns under Axial Compression
The test results on the performance of carbon fiber-reinforced polymer (CFRP)-confined reinforced concrete (RC) columns under axial compression load are presented in this study. Twelve slender CFRP-confined circular RC columns with a diameter of 200 mm were divided into two groups. Six specimens with different slenderness ratios of 12, 20, 32, 40, 48, and 56 were contained in each group. The experimental results demonstrated the circumferential CFRP wrap was effective in enhancing the ultimate axial load of slender CFRP-confined circular RC columns compared with unwrapped RC columns. The experimental investigation also showed that the slenderness of the specimens had important influences on the axial compressive behavior, and the axial bearing capacity of slender CFRP-confined circular RC columns decreased as the slenderness ratio increased. In order to predict the load-carrying capacities of slender CFRP-confined circular RC columns, a formula was proposed and the prediction agreed with the experiments. The slenderness of slender CFRP-confined circular RC columns was recommended to be less than 26.5 in practical engineering.
- 27 April 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (9) , 3968
Open AccessExperimental Study on Slender CFRP-Confined Circular RC Columns under Axial Compression
The test results on the performance of carbon fiber-reinforced polymer (CFRP)-confined reinforced concrete (RC) columns under axial compression load are presented in this study. Twelve slender CFRP-confined circular RC columns with a diameter of 200 mm were divided into two groups. Six specimens with different slenderness ratios of 12, 20, 32, 40, 48, and 56 were contained in each group. The experimental results demonstrated the circumferential CFRP wrap was effective in enhancing the ultimate axial load of slender CFRP-confined circular RC columns compared with unwrapped RC columns. The experimental investigation also showed that the slenderness of the specimens had important influences on the axial compressive behavior, and the axial bearing capacity of slender CFRP-confined circular RC columns decreased as the slenderness ratio increased. In order to predict the load-carrying capacities of slender CFRP-confined circular RC columns, a formula was proposed and the prediction agreed with the experiments. The slenderness of slender CFRP-confined circular RC columns was recommended to be less than 26.5 in practical engineering.
- Open Access
- 14 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 751
Numerical Investigation on the Influence of Surface Flow Direction on the Heat Transfer Characteristics in a Granite Single Fracture
As fluid passes through the fracture of an enhanced geothermal system, the flow direction exhibits distinct angular relationships with the geometric profile of the rough fracture. This will inevitably affect the heat transfer characteristics in the fracture. Therefore, we established a hydro-thermal coupling model to study the influence of the fluid flow direction on the heat transfer characteristics of granite single fractures and the accuracy of the numerical model was verified by experiments. Results demonstrate a strong correlation between the distribution of the local heat transfer coefficient and the fracture morphology. A change in the flow direction is likely to alter the transfer coefficient value and does not affect the distribution characteristics along the flow path. Increasing injection flow rate has an enhanced effect. Although the heat transfer capacity in the fractured increases with the flow rate, a sharp decline in the heat extraction rate and the total heat transfer coefficient is also observed. Furthermore, the model with the smooth fracture surface in the flow direction exhibits a higher heat transfer capacity compared to that of the fracture model with varying roughness. This is attributed to the presence of fluid deflection and dominant channels.
- 14 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 751
Open AccessNumerical Investigation on the Influence of Surface Flow Direction on the Heat Transfer Characteristics in a Granite Single Fracture
As fluid passes through the fracture of an enhanced geothermal system, the flow direction exhibits distinct angular relationships with the geometric profile of the rough fracture. This will inevitably affect the heat transfer characteristics in the fracture. Therefore, we established a hydro-thermal coupling model to study the influence of the fluid flow direction on the heat transfer characteristics of granite single fractures and the accuracy of the numerical model was verified by experiments. Results demonstrate a strong correlation between the distribution of the local heat transfer coefficient and the fracture morphology. A change in the flow direction is likely to alter the transfer coefficient value and does not affect the distribution characteristics along the flow path. Increasing injection flow rate has an enhanced effect. Although the heat transfer capacity in the fractured increases with the flow rate, a sharp decline in the heat extraction rate and the total heat transfer coefficient is also observed. Furthermore, the model with the smooth fracture surface in the flow direction exhibits a higher heat transfer capacity compared to that of the fracture model with varying roughness. This is attributed to the presence of fluid deflection and dominant channels.
- Open Access
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Experimental Study on CFRP‐Confined Circularized Concrete‐Filled Square Steel Tube Short Columns
This study investigates the suitability of the circularization technique for strengthening square concrete‐filled square steel tube (CFSST) short columns. A total of 16 specimens were tested under axial compression. The main parameters under investigation were concrete strength, the thickness of arc cement mortar layer components (CAM), and the layers of carbon fiber‐reinforced polymer (CFRP) sheets. Test results indicated that the failure mode of CFRP‐confined circularized CFSST (C‐C‐CFSST) columns was similar to that of CFRP‐confined concrete columns. The CFRP‐confined circularized strengthening method can increase confinement efficacy and reduce the stress concentration at the corners of CFSST columns. Three existing CFRP‐confined concrete stress‐strain models were evaluated using the test results. The predictions of the Lam and Teng stress‐strain model agree well with the test data.
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Open AccessExperimental Study on CFRP‐Confined Circularized Concrete‐Filled Square Steel Tube Short Columns
This study investigates the suitability of the circularization technique for strengthening square concrete‐filled square steel tube (CFSST) short columns. A total of 16 specimens were tested under axial compression. The main parameters under investigation were concrete strength, the thickness of arc cement mortar layer components (CAM), and the layers of carbon fiber‐reinforced polymer (CFRP) sheets. Test results indicated that the failure mode of CFRP‐confined circularized CFSST (C‐C‐CFSST) columns was similar to that of CFRP‐confined concrete columns. The CFRP‐confined circularized strengthening method can increase confinement efficacy and reduce the stress concentration at the corners of CFSST columns. Three existing CFRP‐confined concrete stress‐strain models were evaluated using the test results. The predictions of the Lam and Teng stress‐strain model agree well with the test data.