Kwong Soon Wong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kwong Soon Wong has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Nurul Noraziemah Mohd Pauzi
School of Civil Engineering, College of Engineering, Universiti Teknologi MARA, Shah Alam, Malaysia
6 shared publications - Ehsan Teymouri
Department of Civil and Construction Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Sarawak, Miri, Malaysia
5 shared publications Matthew Zhi Yeon Ting
3 shared publicationsMuhammad Ekhlasur Rahman
3 shared publications- Yee Yong Tan
Department of Civil and Construction Engineering, Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia
3 shared publications Ignatius Ren Kai Phang
Department of Civil & Construction Engineering, Curtin University Malaysia, CDT 250, Miri, Malaysia
2 shared publications
Latest Publications
- 27 December 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (10) , 13197-13218
Clogging of Zeolite Pervious Concrete in Wastewater Applications: Effects on Performance and Recovery by Pressure Washing
- 27 December 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (10) , 13197-13218
Clogging of Zeolite Pervious Concrete in Wastewater Applications: Effects on Performance and Recovery by Pressure Washing
- Open Access
- 6 August 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 50 (3) , 2337-2364
Application of Adsorbent Pervious Concrete on Mitigating Stormwater and Wastewater Contaminations: A Review
- 6 August 2025
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 50 (3) , 2337-2364
Open AccessApplication of Adsorbent Pervious Concrete on Mitigating Stormwater and Wastewater Contaminations: A Review
- Open Access
- 25 June 2025
- Published by Knowledge E DMCC in Journal of Environmental Treatment Techniques
- Vol. 13 (2) , 119-135
Municipal Wastewater Treatment Using Enhanced Iron Slag Pervious Concrete
Municipal wastewater should be treated properly before being discharged into the environment; however, due to high expenses, it might be unattainable, particularly for developing countries. This study investigates the application of enhanced iron slag pervious concrete (EISPC), an economical and sustainable approach for treating municipal wastewater before being discharged into the environment, where it does not meet the criteria of environmental standards. Consequently, three rectangular cube canals (2 m in length, and 0.3 m in width and height) were constructed and filled with EISPC with a mixture of 100% coarse aggregate iron slag (4.75-9.5 mm). Subsequently, a continuous flow rate of wastewater was entered into these canals with a flow rate of 100 l/hr. Wastewater traveled through canals and its quality was evaluated upon exiting the canals over a week, with evaluations conducted every 24 hours. The results showed that EISPC effectively reduced the chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS) by about 45%, 80%, and 75% at the first sampling, and 25%, 65%, and 50% at the end of the experiment, respectively. The primary mechanism for pollutant removal was the physical entrapment of contaminants within the interconnected pores of EISPC and the porous structure of the iron slag aggregates. Also, the results of scanning electron microscopy (SEM) images proved satisfactory trapping of pollutants and efficiency of EISPC for further application in wastewater treatment plants.
- 25 June 2025
- Published by Knowledge E DMCC in Journal of Environmental Treatment Techniques
- Vol. 13 (2) , 119-135
Open AccessMunicipal Wastewater Treatment Using Enhanced Iron Slag Pervious Concrete
Municipal wastewater should be treated properly before being discharged into the environment; however, due to high expenses, it might be unattainable, particularly for developing countries. This study investigates the application of enhanced iron slag pervious concrete (EISPC), an economical and sustainable approach for treating municipal wastewater before being discharged into the environment, where it does not meet the criteria of environmental standards. Consequently, three rectangular cube canals (2 m in length, and 0.3 m in width and height) were constructed and filled with EISPC with a mixture of 100% coarse aggregate iron slag (4.75-9.5 mm). Subsequently, a continuous flow rate of wastewater was entered into these canals with a flow rate of 100 l/hr. Wastewater traveled through canals and its quality was evaluated upon exiting the canals over a week, with evaluations conducted every 24 hours. The results showed that EISPC effectively reduced the chemical oxygen demand (COD), biochemical oxygen demand (BOD), and total suspended solids (TSS) by about 45%, 80%, and 75% at the first sampling, and 25%, 65%, and 50% at the end of the experiment, respectively. The primary mechanism for pollutant removal was the physical entrapment of contaminants within the interconnected pores of EISPC and the porous structure of the iron slag aggregates. Also, the results of scanning electron microscopy (SEM) images proved satisfactory trapping of pollutants and efficiency of EISPC for further application in wastewater treatment plants.
- 3 November 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (4) , 3189-3210
Self-Healing Concrete Utilizing Ureolysis Mechanism of Microbially Induced Calcite Precipitation (MICP): a Review
- 3 November 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 49 (4) , 3189-3210
Self-Healing Concrete Utilizing Ureolysis Mechanism of Microbially Induced Calcite Precipitation (MICP): a Review
- Open Access
- 5 August 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 96
Strength and workability of one-part sodium carbonate activated mortar incorporated with silicomanganese slag
- 5 August 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 96
Open AccessStrength and workability of one-part sodium carbonate activated mortar incorporated with silicomanganese slag
- Open Access
- 10 July 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 119 (1) , 92-111
Comparative Analysis of Adsorbent Pervious Concrete: Engineering Properties and Environmental Consideration
This study comprehensively compares various low-cost mineral and industrial waste adsorbents in the Adsorbent Pervious Concrete (APC) mixture, focusing on their engineering properties and environmental aspects. Fine-grained adsorbents, including anthracite, iron slag, lignite, LECA, perlite, pumice, and zeolite, were added at a proportion of 10% by weight of coarse aggregate (0.6-1.2 mm size range). Compressive strength, porosity, and permeability tests were conducted to assess APC's engineering properties, while its efficiency in reducing Chemical Oxygen Demand (COD) and Total Suspended Solids (TSS) in urban runoff was examined. ANOVA analysis was performed to evaluate the impact of different adsorbents on APC performance. Results showed that the specific gravity of the adsorbents significantly influenced APC's compressive strength. Anthracite, iron slag, and zeolite increased compressive strength, while all adsorbents, except zeolite, reduced porosity and permeability. Lignite-containing APC exhibited the lowest compressive strength, porosity, and permeability with reductions of 16.12%, 24.7%, and 21.07%, respectively. Furthermore, APC samples demonstrated improved urban runoff quality, with zeolite exhibiting the best performance by reducing COD and TSS by 50.1% and 45.79%, respectively. ANOVA analysis confirmed the substantial influence of different adsorbents on APC's mechanical, physical, and environmental properties. Based on affordability, zeolite, iron slag, and pumice are recommended for use in APC mixtures, offering potential applications in urban areas and building landscaping. This critical analysis provides valuable insights for developing sustainable stormwater management with APC while enhancing its mechanical properties. Further research is encouraged to optimize the selection and utilization of adsorbent materials in APC system.
- 10 July 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Mechanics
- Vol. 119 (1) , 92-111
Open AccessComparative Analysis of Adsorbent Pervious Concrete: Engineering Properties and Environmental Consideration
This study comprehensively compares various low-cost mineral and industrial waste adsorbents in the Adsorbent Pervious Concrete (APC) mixture, focusing on their engineering properties and environmental aspects. Fine-grained adsorbents, including anthracite, iron slag, lignite, LECA, perlite, pumice, and zeolite, were added at a proportion of 10% by weight of coarse aggregate (0.6-1.2 mm size range). Compressive strength, porosity, and permeability tests were conducted to assess APC's engineering properties, while its efficiency in reducing Chemical Oxygen Demand (COD) and Total Suspended Solids (TSS) in urban runoff was examined. ANOVA analysis was performed to evaluate the impact of different adsorbents on APC performance. Results showed that the specific gravity of the adsorbents significantly influenced APC's compressive strength. Anthracite, iron slag, and zeolite increased compressive strength, while all adsorbents, except zeolite, reduced porosity and permeability. Lignite-containing APC exhibited the lowest compressive strength, porosity, and permeability with reductions of 16.12%, 24.7%, and 21.07%, respectively. Furthermore, APC samples demonstrated improved urban runoff quality, with zeolite exhibiting the best performance by reducing COD and TSS by 50.1% and 45.79%, respectively. ANOVA analysis confirmed the substantial influence of different adsorbents on APC's mechanical, physical, and environmental properties. Based on affordability, zeolite, iron slag, and pumice are recommended for use in APC mixtures, offering potential applications in urban areas and building landscaping. This critical analysis provides valuable insights for developing sustainable stormwater management with APC while enhancing its mechanical properties. Further research is encouraged to optimize the selection and utilization of adsorbent materials in APC system.
- 1 June 2024
- Published by Springer Nature
- p. 570-577
Peat Stabilization: Mechanisms of Geopolymer
- Open Access
- 29 May 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (3) , 1969-1989
Fatigue Evaluation of Sulphate-Attacked Industrial Waste-Based Concrete Using Concrete Damaged Plasticity Model
Sulphate attack is a major cause of concrete deterioration in marine environments and its interaction with wave-induced cyclic loading exacerbates the damage. This study has evaluated strengths and fatigue performance (i.e. fatigue life, strain and residual displacement) of sulphate-attacked concrete containing silicomanganese slag, fly ash (FA) and silica fume (SF). Compressive strength, tensile strength and sulphate profile of sulphate-attacked concrete were measured experimentally. Sulphate-induced damage constitutive relations were formulated and used with concrete damaged plasticity (CDP) model to simulate fatigue loading. Experiment showed that incorporating silicomanganese slag lowered sulphate resistance by 4.8–6.6% due to increased sulphate intrusion, but synergy with FA and SF enhanced the resistance by 7.3–13.8% at 365 days. The sulphate penetration depth was 0–20 mm, and the intruded sulphate increased exponentially over time. To evaluate fatigue loading in CDP model, the non-uniform damage was determined as correlation between strength degradation and integral area of sulphate profile. Numerical results were in good agreement with experimental data from literature, with differences of 5.8–26.2% in fatigue life, 9.1–30.1% in fatigue strain and 18.1–41.9% in residual displacement. In long-term deterioration, numerical analysis found that increasing sulphate concentration significantly shortened fatigue life. Despite silicomanganese slag lowered concrete sulphate and fatigue resistance, the inclusion of FA and SF improved the durability and sustainability of concrete for potential marine applications.
- 29 May 2024
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 50 (3) , 1969-1989
Open AccessFatigue Evaluation of Sulphate-Attacked Industrial Waste-Based Concrete Using Concrete Damaged Plasticity Model
Sulphate attack is a major cause of concrete deterioration in marine environments and its interaction with wave-induced cyclic loading exacerbates the damage. This study has evaluated strengths and fatigue performance (i.e. fatigue life, strain and residual displacement) of sulphate-attacked concrete containing silicomanganese slag, fly ash (FA) and silica fume (SF). Compressive strength, tensile strength and sulphate profile of sulphate-attacked concrete were measured experimentally. Sulphate-induced damage constitutive relations were formulated and used with concrete damaged plasticity (CDP) model to simulate fatigue loading. Experiment showed that incorporating silicomanganese slag lowered sulphate resistance by 4.8–6.6% due to increased sulphate intrusion, but synergy with FA and SF enhanced the resistance by 7.3–13.8% at 365 days. The sulphate penetration depth was 0–20 mm, and the intruded sulphate increased exponentially over time. To evaluate fatigue loading in CDP model, the non-uniform damage was determined as correlation between strength degradation and integral area of sulphate profile. Numerical results were in good agreement with experimental data from literature, with differences of 5.8–26.2% in fatigue life, 9.1–30.1% in fatigue strain and 18.1–41.9% in residual displacement. In long-term deterioration, numerical analysis found that increasing sulphate concentration significantly shortened fatigue life. Despite silicomanganese slag lowered concrete sulphate and fatigue resistance, the inclusion of FA and SF improved the durability and sustainability of concrete for potential marine applications.
- Open Access
- 16 May 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (5) , 2949-2967
Developing Lignite Pervious Concrete for Application in Pedestrian Walkways and Urban Runoff Treatment
In the present study, the mechanical characteristics and environmental aspects of lignite pervious concrete (LPC) in reducing stormwater pollution were investigated. Therefore, fine-grained lignite (0.6–1.2 mm) in various portions (up to 15% w/w of coarse aggregate) was added to the PC mixture. The workability, strength, cementitious paste thickness, and physical properties of LPC were examined for further application in urban areas with a focus on stormwater treatment. The statistical analysis of the results of ANOVA and visualization of the microstructure of LPC by means of scanning electron microscopy and energy-dispersive X-ray spectroscopy were also presented. The results showed that LPC is a sticky paste with no slump (0). Adding lignite also slightly reduced the compressive strength of LPC up to 23% lower than the control sample (13.8 MPa). In addition, the presence of lignite led to a considerable reduction in permeability (40%) and porosity (51%) compared to the control sample. It was also found that the increase in cementitious paste thickness resulted in an increase of the compressive strength, which was mainly concentrated between 0.3 and 1.8 mm. However, the performance of LPC in reducing stormwater contamination was promising. Sample L15, with the highest removal efficiency, reduced the chemical oxygen demand, total suspended solids, and turbidity up to 42.14%, 63.38%, and 67.24%, respectively, while no significant changes were observed in pH, total dissolved solids, and nitrate (NO3). In short, although adding lignite to PC caused a reduction in the strength and physical properties of LPC, its efficiency in reducing stormwater pollution is quite promising, and it is recommended for use in green spaces of urban areas. Graphical Abstract
- 16 May 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (5) , 2949-2967
Open AccessDeveloping Lignite Pervious Concrete for Application in Pedestrian Walkways and Urban Runoff Treatment
In the present study, the mechanical characteristics and environmental aspects of lignite pervious concrete (LPC) in reducing stormwater pollution were investigated. Therefore, fine-grained lignite (0.6–1.2 mm) in various portions (up to 15% w/w of coarse aggregate) was added to the PC mixture. The workability, strength, cementitious paste thickness, and physical properties of LPC were examined for further application in urban areas with a focus on stormwater treatment. The statistical analysis of the results of ANOVA and visualization of the microstructure of LPC by means of scanning electron microscopy and energy-dispersive X-ray spectroscopy were also presented. The results showed that LPC is a sticky paste with no slump (0). Adding lignite also slightly reduced the compressive strength of LPC up to 23% lower than the control sample (13.8 MPa). In addition, the presence of lignite led to a considerable reduction in permeability (40%) and porosity (51%) compared to the control sample. It was also found that the increase in cementitious paste thickness resulted in an increase of the compressive strength, which was mainly concentrated between 0.3 and 1.8 mm. However, the performance of LPC in reducing stormwater contamination was promising. Sample L15, with the highest removal efficiency, reduced the chemical oxygen demand, total suspended solids, and turbidity up to 42.14%, 63.38%, and 67.24%, respectively, while no significant changes were observed in pH, total dissolved solids, and nitrate (NO3). In short, although adding lignite to PC caused a reduction in the strength and physical properties of LPC, its efficiency in reducing stormwater pollution is quite promising, and it is recommended for use in green spaces of urban areas. Graphical Abstract
- 5 March 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 70
Iron slag pervious concrete for reducing urban runoff contamination
- 5 March 2023
- Published by Elsevier in Journal of Building Engineering
- Vol. 70
Iron slag pervious concrete for reducing urban runoff contamination