RWRobert W. Wilson

Robert W. Wilson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Robert W. Wilson has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrated Fault Seal Analysis: An Introduction

    by Steven R. Ogilvie, Steve J. Dee, Robert W. Wilson, Wayne R. Bailey

    Faults commonly trap and impact the flow of fluids such as hydrocarbons and water over a range of timescales and therefore are of economic significance. During hydrocarbon exploration, analysis of the sealing capacity of faults can impact both the assessment of the probability of finding hydrocarbons and also the estimate of the likely resource range. During hydrocarbon field development, smaller faults can provide seals, baffles and/or conduits to flow. There are relatively simple, well-established workflows to carry out a fault seal analysis for siliciclastic rocks based primarily on clay content. There are, however, outstanding challenges related to other rock types, to calibrating fault seal models (with static and dynamic data) and to handling uncertainty. The variety of studies presented here demonstrate the types of data required and workflows followed in today's environment in order to understand the uncertainties, risks and upsides associated with fault-related fluid flow. These studies span all parts of the hydrocarbon value chain from exploration to production but are also of relevance for other industries such as radioactive waste and CO 2 containment.


  • Open Access

    Fifty years of the Wilson Cycle concept in plate tectonics: an overview

    by R. W. Wilson, G. A. Houseman, S. J. H. Buiter, K. J. W. McCaffrey, A. G. Doré

    It is now more than 50 years since Tuzo Wilson published his paper asking ‘Did the Atlantic close and then re-open?’. This led to the ‘Wilson Cycle’ concept in which the repeated opening and closing of ocean basins along old orogenic belts is a key process in the assembly and breakup of supercontinents. This implied that the processes of rifting and mountain building somehow pre-conditioned and weakened the lithosphere in these regions, making them susceptible to strain localization during future deformation episodes. Here we provide a retrospective look at the development of the concept, how it has evolved over the past five decades, current thinking and future focus areas. The Wilson Cycle has proved enormously important to the theory and practice of geology and underlies much of what we know about the geological evolution of the Earth and its lithosphere. The concept will no doubt continue to be developed as we gain more understanding of the physical processes that control mantle convection and plate tectonics, and as more data become available from currently less accessible regions.


  • The role of pre‐existing structures during rifting, continental breakup and transform system development, offshore West Greenland

    by Alexander Peace, Ken McCaffrey, Jonathan Imber, Jeroen van Hunen, Richard Hobbs, Robert Wilson

    Continental breakup between Greenland and North America produced the small oceanic basins of the Labrador Sea and Baffin Bay, which are connected via the Davis Strait, a region mostly comprised of continental crust. This study contributes to the debate regarding the role of pre‐existing structures on rift development in this region using seismic reflection data from the Davis Strait data to produce a series of seismic surfaces, isochrons and a new offshore fault map from which three normal fault sets were identified as (i) NE‐SW, (ii) NNW‐SSE and (iii) NW‐SE. These results were then integrated with plate reconstructions and onshore structural data allowing us to build a two‐stage conceptual model for the offshore fault evolution in which basin formation was primarily controlled by rejuvenation of various types of pre‐existing structures. During the first phase of rifting between at least Chron 27 (ca. 62 Ma; Palaeocene), but potentially earlier, and Chron 24 (ca. 54 Ma; Eocene) faulting was primarily controlled by pre‐existing structures with oblique normal reactivation of both the NE‐SW and NW‐SE structural sets in addition to possible normal reactivation of the NNW‐SSE structural set. In the second rifting stage between Chron 24 (ca. 54 Ma; Eocene) and Chron 13 (ca. 35 Ma; Oligocene), the sinistral Ungava transform fault system developed due to the lateral offset between the Labrador Sea and Baffin Bay. This lateral offset was established in the first rift stage possibly due to the presence of the Nagssugtoqidian and Torngat terranes being less susceptible to rift propagation. Without the influence of pre‐existing structures the manifestation of deformation cannot be easily explained during either of the rifting phases. Although basement control diminished into the post‐rift, the syn‐rift basins from both rift stages continued to influence the location of sedimentation possibly due to differential compaction effects. Variable lithospheric strength through the rifting cycle may provide an explanation for the observed diminishing role of basement structures through time.


  • Industrial structural geology: principles, techniques and integration: an introduction

    by Nicholas J. Richardson, Francis L. Richards, Stephen J. Rippington, Clare E. Bond, Robert W. Wilson

    The authors wish to acknowledge the generous financial support provided in association with this volume to the Geological Society and the Petroleum Group by Badley Geoscience Ltd, BP, CGG Robertson, Dana Petroleum Ltd, Getech Group plc, Maersk Oil North Sea UK Ltd, Midland Valley Exploration Ltd, Rock Deformation Research (Schlumberger) and Borehole Image & Core Specialists (Wildcat Geoscience, Walker Geoscience and Prolog Geoscience). We would like to thank the fine team at the Geological Society’s Publishing House for the excellent support and encouragement that they have provided to the editors and authors of this Special Publication.Peer reviewedPublisher PD


  • Morphostructural patterns and landform generations in a glaciated passive margin: the Kobberminebugt-Qaqortoq region of South Greenland

    by Jean-Pierre Peulvast, Johan M. Bonow, Peter Japsen, Robert W. Wilson, Ken J.W. McCaffrey


  • Recording and Analyzing Geospatially Accurate Structural Data through ‘Digital Mapping’ Technique

    by A. Chattopadhyay, R. E. Holdsworth, K. J. W. McCaffrey, R. W. Wilson

    Spatial accuracy of structural data is an important factor for construction of a properly scaled model of crustal structures. Digital Geological Mapping methods can add the required spatial accuracy to the data, and also can improve the versatility of the geological/structural map in many ways, which are difficult to achieve through conventional mapping techniques. The present paper describes the methodology of digital mapping and discusses its applicability in structural analyses in the Canisp Shear Zone (CSZ) – a reactivated continental basement structure in the Precambrian Lewisian Gneiss complex of NW Scottish Highland. The CSZ is reinterpreted as a major dextral transpressional shear zone developed during Laxfordian deformation. It overprinted an earlier Inverian shear zone fabric, and was later reactivated and/or overprinted by brittle shearing of different phases and different scales. Spatial analyses within the ArcGISTM environment has helped bring out the geological relationships between different types of structural data in the shear zone, highlighting the partitioning of deformation into zones of high and low strain. A kinematic interpretation based on the geospatial data analysis, combined with conventional stereographic projection technique, is presented.


  • Basement-influenced rifting and basin development: a reappraisal of post-Caledonian faulting patterns from the North Coast Transfer Zone, Scotland

    by R. W. Wilson, R. E. Holdsworth, L. E. Wild, K. J. W. McCaffrey, R. W. England, J. Imber, R. A. Strachan

    The post-Caledonian development of the West Orkney Basin is regularly cited as a classic example of basement-influenced rifting. This paper presents the first detailed multidisciplinary analysis of the three-dimensional (3D) geometries and distribution of post-Caledonian faults in onshore northernmost Scotland, examining their relationships to basement fabrics and comparing them to rift-related structures developed offshore in the West Orkney Basin. Two phases of rift-related faulting are distinguished: 1) Devonian ENE–WSW extension localized in the east of the basin and related to regional sinistral transtension along the Great Glen Fault; and 2) Permo-Triassic NW–SE extension focused to the west of the basin and probably contemporaneous with movements along the Minch Fault. A complex North Coast Transfer Zone is developed along the northern Scottish coast linking Mesozoic rifts that reactivated Caledonian structures in the West Orkney Basin (Naver Thrust) to those bounding the North Minch Basin (Outer Hebrides Fault Zone). Polymodal faulting patterns are widespread in onshore exposures. Fault patterns vary due to changes in the obliquity between regional rifting vectors and variably orientated pre-existing structures in each basement terrane. The geometric complexity and spatial variations in fault patterns onshore can be correlated with changes in basement structures, despite limited direct reactivation of pre-existing fabrics.


  • Integration of regional to outcrop digital data: 3D visualisation of multi-scale geological models

    by R.R. Jones, K.J.W. McCaffrey, P. Clegg, R.W. Wilson, N.S. Holliman, R.E. Holdsworth, J. Imber, S. Waggott


  • Calibration and validation of reservoir models: the importance of high resolution, quantitative outcrop analogues

    by Richard R. Jones, Kenneth J. W. Mccaffrey, Jonathan Imber, Ruth Wightman, Steven A. F. Smith, Robert E. Holdsworth, Phillip Clegg, Nicola De Paola, David Healy, Robert W. Wilson

    Rapidly developing methods of digital acquisition, visualization and analysis allow highly detailed outcrop models to be constructed, and used as analogues to provide quantitative information about sedimentological and structural architectures from reservoir to subseismic scales of observation. Terrestrial laser-scanning (lidar) and high precision Real-Time Kinematic GPS are key survey technologies for data acquisition. 3D visualization facilities are used when analysing the outcrop data. Analysis of laser-scan data involves picking of the point-cloud to derive interpolated stratigraphic and structural surfaces. The resultant data can be used as input for object-based models, or can be cellularized and upscaled for use in grid-based reservoir modelling. Outcrop data can also be used to calibrate numerical models of geological processes such as the development and growth of folds, and the initiation and propagation of fractures.