Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Girish Chandra Tewari has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermoelectric p‐Type Iron‐Based Ethylenetetrathiolate Coordination Polymers

    by Malar Auxilia Francis, Mari Heikkinen, Girish C. Tewari, Kristoffer Meinander, Johan Lindén, Maarit Karppinen

    Here we demonstrate high room‐temperature Seebeck coefficient of 95 µV K −1 in combination with ultralow thermal conductivity of 0.18 W m −1 K −1 for a novel bimetallic p‐type semiconducting coordination polymer. We synthesize the (Fe, Cu) bimetallic coordination polymer together with the single‐metal Cu and Fe counterparts using 1,3,4,6‐ tetrathiapentalene‐2,5‐dione (TPD) as the organic ligand. The resultant poly[metal‐ethylenetetrathiolate] materials are characterized by XPS (X‐ray photoelectron spectroscopy) and Mössbauer spectroscopy techniques for the copper and iron metal oxidation states and with PPMS (physical property measurement system) for electronic and thermal transport properties in the temperature range of 100–350 K. The heterobimetallic effect in poly[(Fe, Cu)‐ETT] is best appreciated regarding the enhanced Seebeck coefficient. We foresee that the present p‐type poly[(Fe, Cu)‐ETT] thermoelectrics could be a promising counterpart for the previously more widely investigated n‐type conducting polymers.

  • Open Access

    Area-driven Bosonic Superconductor-Insulator Transition in disordered Indium Oxide strips

    by Girish Chandra Tewari, Sreemanta Mitra, Dan Shahar

    In disordered electronic systems, the zero-temperature (T) conductance was proposed to scale with the system’s effective length. Many efforts have been made to establish this for the superconductor-to-insulator transition (SIT) observed in disordered superconductors. While several external parameters have been shown to scale the T = 0 conductance, scaling with the physical sample size has never been observed. Here, we systematically study the low-temperature electrical transport behavior of co-fabricated amorphous indium oxide (a:InO) strips of varying areas at zero magnetic field. Larger area devices exhibited a superconducting ground state, while devices with reduced area showed an insulating ground state, indicating a SIT. Crucially, we scaled the SIT in a:InO strips with the sample’s area (L2), providing the first direct evidence that the transition can be driven by area alone, independent of width, length, or any other external parameter. Additionally, at the transition point, the resistance per square (R□) was found to be close to the quantum resistance of Cooper pairs (RQ = h/(2e)2≈ 6.45 kΩ), consistent with a quantum phase transition governed primarily by phase fluctuations rather than amplitude suppression, further indicating that Cooper pairs remain intact across the transition. This finding contributes to the long-debated nature of SIT, supporting the prevalence of bosonic behavior.

  • Open Access

    Thermoelectric metal chalcogenides: a platform for anion mixing studies

    by Oleksandr Dobrozhan, Sajida Kousar, Girish C. Tewari, Maarit Karppinen

    Thermoelectric metal chalcogenides: effects of anion mixing.

  • Open Access

    Atomic/molecular layer deposition of p-type conducting copper–sulfur–organic coordination polymer thin films for thermoelectric applications

    by Mari Heikkinen, Malar Auxilia Francis, Kristoffer Meinander, Girish C. Tewari, Mikko Nisula, Maarit Karppinen

    A three-precursor ALD/MLD process based on Cu-for-Li trans-metalation reaction allows the fabrication of p-type thermoelectric poly[Cu-ETT] coordination polymer thin films with appreciably high Seebeck coefficient.


  • Open Access

    Tunable Electrical and Optical Properties in Atomic Layer Deposited TiO 2 :Pt Thin Films via Dynamic Metallic Nanoparticle Formation

    by Ramin Ghiyasi, Girish C. Tewari, Maarit Karppinen

    Composite TiO2:Pt thin films deposited by atomic layer deposition (ALD) exhibit significant temperature‑dependent resistivity transitions, from insulating to semiconducting to metallic‑like conducting behavior, while remaining transparent to visible light and strongly absorbing ultraviolet (UV) radiation. The composite films are fabricated using a supercycle approach, and the morphological, electrical, and optical properties are systematically investigated for a series of films with the cycle ratio varying from 4TiO 2 :1Pt to 1TiO 2 :4Pt. The thus deposited thin films, specifically those with 2TiO 2 :1Pt, 1TiO 2 :1Pt, and 1TiO 2 :2Pt ratios, consist of metallic Pt nanoparticles embedded within the anatase‐type TiO 2 matrix, in which the optical properties are primarily governed by the TiO 2 component, whereas the electrical behavior depends on the Pt particle size and density. Notably, films with a 2TiO 2 :1Pt ratio undergo morphological alterations due to the nucleation of Pt nanoparticles beginning at temperatures slightly above room temperature (≈340 K), resulting in alterations in the electrical resistivity. These findings highlight the potential of ALD‐grown TiO 2 :Pt composite thin films for applications in transparent electronics, optoelectronics, and photocatalytic systems.


  • Toward roll-to-roll ALD of thermoelectric Al-doped ZnO thin films on flexible nanostructured PET membranes

    by Esa Alakoski, Sami Kinnunen, Girish C. Tewari, Jaakko Julin, Antti J. Soininen, Maarit Karppinen

    Thin films are an effective way of manufacturing thermoelectric (TE) sensors for biomedical devices and wearable electronics. Excellent conformality and sub-nanometer thickness control of atomic layer deposition (ALD) make it a promising method of preparing TE thin films on flexible polymer and textile substrates suitable for sensor use. Here, Al-doped ZnO films were deposited on flexible perforated polyethylene terephthalate (PET) templates with 50/1 diethylzinc/trimethylaluminum pulsing ratio at a low temperature of 100 °C. Thermoelectric properties of the resulting nanocomposites were measured. The application potential of the present ALD-made TE coatings on flexible PET films for future roll-to-roll fabrication is discussed.


  • Open Access

    Massive reduction in lattice thermal conductivity and strongly enhanced thermoelectric properties in Ge- and Se-doped CoSbS

    by H. Sajida Kousar, Divya Srivastava, Antti J. Karttunen, Maarit Karppinen, Girish C. Tewari

    Ge-substitution in CoSbS significantly enhances electrical conductivity and reduces lattice thermal conductivity via point defect scattering, leading to improved thermoelectric properties.


  • Open Access

    Tunable Low‐Temperature Thermoelectric Transport Properties in Layered CuCr(S1‐xSex)2 System

    by H. Sajida Kousar, Divya Srivastava, Maarit Karppinen, Girish C Tewari

    We have characterized the layered CuCr(S,Se)2 system for the spin‐polarized electronic band structures and low‐temperature thermoelectric transport properties. The electronic band structure calculations reveal semiconducting behavior for CuCrS2, CuCr(S0.5Se0.5)2 and CuCrSe2 with an indirect bandgap of 0.42, 0.30 and 0.10 eV, respectively. The systematically decreased bandgap with increasing Se content is in line with the experimental observations showing a semiconductor‐to‐metal transition with increasing Se‐substitution level in the CuCr(S1‐xSex)2 system because of an increase in the charge carrier density. The p‐type Seebeck coefficient shows a linear temperature dependence for the samples, like in degenerate semiconductors or metals. The remarkably large Seebeck coefficient even in metallic samples is due to a relatively large effective mass of charge carriers. As the thermal conductivity is intrinsically low owing to the layered crystal structure and is further decreased for the Se‐substituted samples because of the increased phonon scattering from point defects, the thermoelectric characteristics are promising. The highest dimensionless figure‐of‐merit values were seen for the x=0.5 sample, e. g., 0.04 at 400 K.


  • Open Access

    p-type to n-type conductivity transition in thermoelectric CoSbS

    by H. Sajida Kousar, Divya Srivastava, Antti J. Karttunen, Maarit Karppinen, Girish C. Tewari

    We demonstrate a p-type to n-type conductivity transition for thermoelectric CoSbS achieved by precisely controlling the sulfur vapor pressure during the sample synthesis. The p–n transition is experimentally confirmed by both the Seebeck coefficient and the Hall effect measurements. From the crystal structure refinements, the increase in the sulfur vapor pressure in the synthesis is weakly but steadily reflected in the occupancy factor of sulfur in the CoSbS lattice, while the p–n transition is seen as a peak in all the three lattice parameters, a, b, and c. Computationally, the situation could be simulated with first principle DFT calculations on compressed CoSbS. Without compression, DFT presents CoSbS as a p-type semiconductor with an indirect bandgap of 0.38 eV, while the pressure application results in an n-type semiconductor with decreased lattice parameters but the same indirect bandgap as in the uncompressed case. Experimentally, the thermal conductivity is strongly enhanced for sulfur-deficient samples, which could be due to larger phonon mean free paths. The sulfur loading significantly enhances the electrical conductivity while moderately decreasing the Seebeck coefficient such that the overall power factor is improved by a factor of 9 for the n-type sample and by a factor of 6 for the p-type sample, owing to the increased charge carrier density, although the performance is still relatively low. Thus, this study highlights CoSbS as a promising building block for thermoelectric devices based on its bipolar semiconductor nature with the possibility for both p-type and n-type doping with enhanced power factor.