Kati Stranius
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kati Stranius has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Nikolai V. Tkachenko
Faculty of Engineering and Natural Sciences Tampere University Korkeakoulunkatu 8 Tampere 33720 Finland
9 shared publications Helge Lemmetyinen
Department of Chemistry and Bioengineering, Tampere University of Technology, P.O. Box 541, FIN-33101 Tampere, Finland
8 shared publications- Hiroshi Imahori
Kyoto University
7 shared publications Nikolai V. Tkachenko
Department of Chemistry and Bioengineering, Tampere University of Technology, Tampere, Finland 33101
7 shared publications- Tomokazu Umeyama
Department of Applied Chemistry, Graduate School of Engineering, University of Hyogo
5 shared publications - Alexander Efimov
Tampere University, Engineering and Natural Science, Materials Science and Environmental Engineering, Tampere, Finland
4 shared publications
Latest Publications
- Open Access
- 5 June 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 10 (27) , 6642-6650
Exclusive occurrence of photoinduced energy transfer and switching of its direction by rectangular π-extension of nanographenes
As structure defined cutouts of the graphene lattice, nanographene molecules have gained plenty of attention because of their high potential for versatile applications in organic electronics and energy conversion devices and as ideal model systems for the better understanding of intrinsic structure–property correlations of graphenes. In this study, well-defined nanographenes with sp2 carbon networks of different sizes, hexa-peri-hexabenzocoronene (HBC) and its rectangularly π-extended version, a short graphene nanoribbon (GNR), have been covalently functionalized with photoactive porphyrin molecules. On the basis of their spectroscopic studies, the photodynamics of the porphyrin-linked nanographenes was found to be influenced substantially by the size of the nanographenes. Photoexcitation of the porphyrin–HBC linked system led to exclusive energy transfer (EnT) from the first singlet excited state (S1) of the nanographene to the porphyrin, whereas opposite selective EnT occurred from the first and second singlet excited states (S1 and S2) of the porphyrin to the nanographene in the porphyrin–GNR linked system. In particular, ultrafast efficient EnTs from both the S2 and S1 states of the porphyrin to GNR mimic the corresponding ultrafast EnTs from the S2 and S1 states of carotenoids to chlorophylls in light-harvesting systems of natural photosynthesis. Such unique photophysical properties will be useful for the rational design of carbon-based photofunctional nanomaterials for optoelectronics and solar energy conversion devices.
- 5 June 2019
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 10 (27) , 6642-6650
Open AccessExclusive occurrence of photoinduced energy transfer and switching of its direction by rectangular π-extension of nanographenes
As structure defined cutouts of the graphene lattice, nanographene molecules have gained plenty of attention because of their high potential for versatile applications in organic electronics and energy conversion devices and as ideal model systems for the better understanding of intrinsic structure–property correlations of graphenes. In this study, well-defined nanographenes with sp2 carbon networks of different sizes, hexa-peri-hexabenzocoronene (HBC) and its rectangularly π-extended version, a short graphene nanoribbon (GNR), have been covalently functionalized with photoactive porphyrin molecules. On the basis of their spectroscopic studies, the photodynamics of the porphyrin-linked nanographenes was found to be influenced substantially by the size of the nanographenes. Photoexcitation of the porphyrin–HBC linked system led to exclusive energy transfer (EnT) from the first singlet excited state (S1) of the nanographene to the porphyrin, whereas opposite selective EnT occurred from the first and second singlet excited states (S1 and S2) of the porphyrin to the nanographene in the porphyrin–GNR linked system. In particular, ultrafast efficient EnTs from both the S2 and S1 states of the porphyrin to GNR mimic the corresponding ultrafast EnTs from the S2 and S1 states of carotenoids to chlorophylls in light-harvesting systems of natural photosynthesis. Such unique photophysical properties will be useful for the rational design of carbon-based photofunctional nanomaterials for optoelectronics and solar energy conversion devices.
- Open Access
- 15 January 2019
- Published by Wiley in Advanced Science
- Vol. 6 (4) , 1801650
A Record Chromophore Density in High‐Entropy Liquids of Two Low‐Melting Perylenes: A New Strategy for Liquid Chromophores
Liquid chromophores constitute a rare but intriguing class of molecules that are in high demand for the design of luminescent inks, liquid semiconductors, and solar energy storage materials. The most common way to achieve liquid chromophores involves the introduction of long alkyl chains, which, however, significantly reduces the chromophore density. Here, strategy is presented that allows for the preparation of liquid chromophores with a minimal increase in molecular weight, using the important class of perylenes as an example. Two synergistic effects are harnessed: (1) the judicious positioning of short alkyl substituents, and (2) equimolar mixing, which in unison results in a liquid material. A series of 1‐alkyl perylene derivatives is synthesized and it is found that short ethyl or butyl chains reduce the melting temperature from 278 °C to as little as 70 °C. Then, two low‐melting derivatives are mixed, which results in materials that do not crystallize due to the increased configurational entropy of the system. As a result, liquid chromophores with the lowest reported molecular weight increase compared to the neat chromophore are obtained. The mixing strategy is readily applicable to other π‐conjugated systems and, hence, promises to yield a wide range of low molecular weight liquid chromophores.
- 15 January 2019
- Published by Wiley in Advanced Science
- Vol. 6 (4) , 1801650
Open AccessA Record Chromophore Density in High‐Entropy Liquids of Two Low‐Melting Perylenes: A New Strategy for Liquid Chromophores
Liquid chromophores constitute a rare but intriguing class of molecules that are in high demand for the design of luminescent inks, liquid semiconductors, and solar energy storage materials. The most common way to achieve liquid chromophores involves the introduction of long alkyl chains, which, however, significantly reduces the chromophore density. Here, strategy is presented that allows for the preparation of liquid chromophores with a minimal increase in molecular weight, using the important class of perylenes as an example. Two synergistic effects are harnessed: (1) the judicious positioning of short alkyl substituents, and (2) equimolar mixing, which in unison results in a liquid material. A series of 1‐alkyl perylene derivatives is synthesized and it is found that short ethyl or butyl chains reduce the melting temperature from 278 °C to as little as 70 °C. Then, two low‐melting derivatives are mixed, which results in materials that do not crystallize due to the increased configurational entropy of the system. As a result, liquid chromophores with the lowest reported molecular weight increase compared to the neat chromophore are obtained. The mixing strategy is readily applicable to other π‐conjugated systems and, hence, promises to yield a wide range of low molecular weight liquid chromophores.
- Open Access
- 11 June 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-7
Selective manipulation of electronically excited states through strong light–matter interactions
Strong coupling between light and matter leads to the spontaneous formation of hybrid light–matter states, having different energies than the uncoupled states. This opens up for new ways of modifying the energy landscape of molecules without changing their atoms or structure. Heavy metal-free organic light emitting diodes (OLED) use reversed intersystem crossing (RISC) to harvest light from excited triplet states. This is a slow process, thus increasing the rate of RISC could potentially enhance OLED performance. Here we demonstrate selective coupling of the excited singlet state of Erythrosine B without perturbing the energy level of a nearby triplet state. The coupling reduces the triplet–singlet energy gap, leading to a four-time enhancement of the triplet decay rate, most likely due to an enhanced rate of RISC. Furthermore, we anticipate that strong coupling can be used to create energy-inverted molecular systems having a singlet ground and lowest excited state.
- 11 June 2018
- Published by Springer Nature in Nature Communications
- Vol. 9 (1) , 1-7
Open AccessSelective manipulation of electronically excited states through strong light–matter interactions
Strong coupling between light and matter leads to the spontaneous formation of hybrid light–matter states, having different energies than the uncoupled states. This opens up for new ways of modifying the energy landscape of molecules without changing their atoms or structure. Heavy metal-free organic light emitting diodes (OLED) use reversed intersystem crossing (RISC) to harvest light from excited triplet states. This is a slow process, thus increasing the rate of RISC could potentially enhance OLED performance. Here we demonstrate selective coupling of the excited singlet state of Erythrosine B without perturbing the energy level of a nearby triplet state. The coupling reduces the triplet–singlet energy gap, leading to a four-time enhancement of the triplet decay rate, most likely due to an enhanced rate of RISC. Furthermore, we anticipate that strong coupling can be used to create energy-inverted molecular systems having a singlet ground and lowest excited state.
- 18 December 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (7)
Ultralong 20 Milliseconds Charge Separation Lifetime for Photoilluminated Oligophenylenevinylene–Azafullerene Systems
The synthesis and characterization of oligophenylenevinylene (OPV)–azafullerene (C59N) systems in the form of OPV–C59N donor–acceptor dyad 1 and C59N–OPV–C59N acceptor–donor–acceptor triad 2 is accomplished. Photoinduced electronic interactions between OPV and C59N within 1 and 2 are assessed by UV–vis and photoluminescence. The redox properties of 1 and 2 are investigated, revealing a set of one‐electron oxidation and three one‐electron reduction processes owed to OPV and C59N, respectively. The electrochemical bandgap for 1 and 2 is calculated as 1.44 and 1.53 eV, respectively, and the free energy for the formation of the charge‐separated state for 1 and 2 via the singlet‐excited state of OPV is found negative, proving a thermodynamically favorable the process. Photoexcitation assays are performed in toluene and o‐dichlorobenzene (oDCB) and the reactions are monitored with time‐resolved absorption and emission spectroscopies. Competitive photoinduced energy and electron transfer are identified to occur in both systems, with the former being dominant in 2. Markedly, the charge‐separated state in oDCB exhibits a much longer lifetime compared to that in toluene, reaching 20 ms for 1, the highest ever reported value for fullerene‐based materials. These unprecedented results are rationalized by considering conformational phenomena affecting the charge‐separated state.
- 18 December 2017
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (7)
Ultralong 20 Milliseconds Charge Separation Lifetime for Photoilluminated Oligophenylenevinylene–Azafullerene Systems
The synthesis and characterization of oligophenylenevinylene (OPV)–azafullerene (C59N) systems in the form of OPV–C59N donor–acceptor dyad 1 and C59N–OPV–C59N acceptor–donor–acceptor triad 2 is accomplished. Photoinduced electronic interactions between OPV and C59N within 1 and 2 are assessed by UV–vis and photoluminescence. The redox properties of 1 and 2 are investigated, revealing a set of one‐electron oxidation and three one‐electron reduction processes owed to OPV and C59N, respectively. The electrochemical bandgap for 1 and 2 is calculated as 1.44 and 1.53 eV, respectively, and the free energy for the formation of the charge‐separated state for 1 and 2 via the singlet‐excited state of OPV is found negative, proving a thermodynamically favorable the process. Photoexcitation assays are performed in toluene and o‐dichlorobenzene (oDCB) and the reactions are monitored with time‐resolved absorption and emission spectroscopies. Competitive photoinduced energy and electron transfer are identified to occur in both systems, with the former being dominant in 2. Markedly, the charge‐separated state in oDCB exhibits a much longer lifetime compared to that in toluene, reaching 20 ms for 1, the highest ever reported value for fullerene‐based materials. These unprecedented results are rationalized by considering conformational phenomena affecting the charge‐separated state.
- 16 June 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (25) , 13952-13961
Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges
- 16 June 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (25) , 13952-13961
Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges
- 26 April 2017
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 28 (5) , 1363-1370
Specific Imaging of Intracellular Lipid Droplets Using a Benzothiadiazole Derivative with Solvatochromic Properties
Altered lipid metabolism and extensive lipid storage in cells have been associated with various medical disorders, including cancer. The development of fluorescent probes that specifically accumulate in lipid deposits is therefore of great interest in order to study pathological processes that are linked to dysregulated lipogenesis. In the present study, we present a small fluorescent benzothiadiazole dye that specifically stains lipid droplets in living and fixated cells. The photophysical characterization of the probe revealed strong solvatochromic behavior, large Stokes shifts, and high fluorescent quantum yields in hydrophobic solvents. In addition, the fluorophore exhibits a nontoxic profile and a high signal-to-noise ratio in cells (i.e., lipid droplets vs cytosol), which make it an excellent candidate for studying lipid biology using confocal fluorescent microscopy.
- 26 April 2017
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 28 (5) , 1363-1370
Specific Imaging of Intracellular Lipid Droplets Using a Benzothiadiazole Derivative with Solvatochromic Properties
Altered lipid metabolism and extensive lipid storage in cells have been associated with various medical disorders, including cancer. The development of fluorescent probes that specifically accumulate in lipid deposits is therefore of great interest in order to study pathological processes that are linked to dysregulated lipogenesis. In the present study, we present a small fluorescent benzothiadiazole dye that specifically stains lipid droplets in living and fixated cells. The photophysical characterization of the probe revealed strong solvatochromic behavior, large Stokes shifts, and high fluorescent quantum yields in hydrophobic solvents. In addition, the fluorophore exhibits a nontoxic profile and a high signal-to-noise ratio in cells (i.e., lipid droplets vs cytosol), which make it an excellent candidate for studying lipid biology using confocal fluorescent microscopy.
- Open Access
- 24 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , srep41145
Determining the Photoisomerization Quantum Yield of Photoswitchable Molecules in Solution and in the Solid State
Photoswitchable molecules are able to isomerize between two metastable forms through light stimuli. Originally being studied by photochemists, this type of molecule has now found a wide range of applications within physics, chemistry and biology. The extensive usage of photochromic molecules is due to the two isomers having fundamentally different physical and chemical properties. The most important attribute of a photoswitch is the photoisomerization quantum yield, which defines the efficiency of the photoisomerization event. Here we show how to determine the photoisomerization quantum yield in the solid state and in solution when taking thermal processes into account. The described method together with provided software allows for rapid and accurate determination of the isomerization process for this important class of molecules.
- 24 January 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , srep41145
Open AccessDetermining the Photoisomerization Quantum Yield of Photoswitchable Molecules in Solution and in the Solid State
Photoswitchable molecules are able to isomerize between two metastable forms through light stimuli. Originally being studied by photochemists, this type of molecule has now found a wide range of applications within physics, chemistry and biology. The extensive usage of photochromic molecules is due to the two isomers having fundamentally different physical and chemical properties. The most important attribute of a photoswitch is the photoisomerization quantum yield, which defines the efficiency of the photoisomerization event. Here we show how to determine the photoisomerization quantum yield in the solid state and in solution when taking thermal processes into account. The described method together with provided software allows for rapid and accurate determination of the isomerization process for this important class of molecules.
- 1 August 2016
- Published by World Scientific Pub Co Pte Ltd in Journal of Porphyrins and Phthalocyanines
- Vol. 20 (08n11) , 1264-1271
Formation and stability of porphyrin and phthalocyanine self-assembled monolayers on ZnO surfaces
Formation of self-assembled monolayers (SAMs) of three porphyrin and one phthalocyanine derivatives on thin ZnO film was studied by monitoring absorption spectra of the samples. The compounds were equipped with carboxylic or phosphate groups to bind to the surface. The SAM formation was found to be fast. The layer was formed in less than 15 min for all studied porphyrins, and 30 min was sufficient to form phthalocyanine layer. For porphyrins with different anchor groups the SAM formation was too fast to see any difference between the anchoring groups. The stability of SAMs was tested then by immersing the samples into neat solvents. Upon immersion the SAMs were gradually losing the absorbance for all the compounds with degradation trends being in line with p[Formula: see text] values of the binding groups of the same type. However, even for the weakest binding group the SAM was relatively stable after a few tens of minutes of washing, which was sufficient to remove physisorbed compounds but the SAM was essentially not destroyed. Comparison of SAMs on thin films with SAMs on ZnO nanorods and TiO2 nanoparticle films indicated the same fast layer formation but relatively weaker SAMs stability, showing 20–40% faster absorption losses during the washing.
- 1 August 2016
- Published by World Scientific Pub Co Pte Ltd in Journal of Porphyrins and Phthalocyanines
- Vol. 20 (08n11) , 1264-1271
Formation and stability of porphyrin and phthalocyanine self-assembled monolayers on ZnO surfaces
Formation of self-assembled monolayers (SAMs) of three porphyrin and one phthalocyanine derivatives on thin ZnO film was studied by monitoring absorption spectra of the samples. The compounds were equipped with carboxylic or phosphate groups to bind to the surface. The SAM formation was found to be fast. The layer was formed in less than 15 min for all studied porphyrins, and 30 min was sufficient to form phthalocyanine layer. For porphyrins with different anchor groups the SAM formation was too fast to see any difference between the anchoring groups. The stability of SAMs was tested then by immersing the samples into neat solvents. Upon immersion the SAMs were gradually losing the absorbance for all the compounds with degradation trends being in line with p[Formula: see text] values of the binding groups of the same type. However, even for the weakest binding group the SAM was relatively stable after a few tens of minutes of washing, which was sufficient to remove physisorbed compounds but the SAM was essentially not destroyed. Comparison of SAMs on thin films with SAMs on ZnO nanorods and TiO2 nanoparticle films indicated the same fast layer formation but relatively weaker SAMs stability, showing 20–40% faster absorption losses during the washing.
- 29 December 2014
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 31 (3) , 944-952
Photophysical Study of a Self-Assembled Donor–Acceptor Two-Layer Film on TiO2
The self-assembled monolayer (SAM) technique was employed to fabricate a two-layer donor–acceptor film on the surface of TiO2. The approach is based on using donor and acceptor compounds with anchoring groups of different lengths. The acceptor, a fullerene derivative, has a carboxyl anchor attached to the fullerene moiety via a short linker that places the fullerene close to the surface. The donor, a porphyrin derivative, is equipped with a long linker that can penetrate between the fullerenes and keep porphyrin on top of the fullerene layer. The two-layer fullerene–porphyrin structures were deposited on a mesoporous film of TiO2 nanoparticles by immersing the TiO2 film sequentially into fullerene and porphyrin solutions. Transient absorption spectroscopy studies of the samples revealed that after the selective photoexcitation of porphyrin a fast (2 nanoparticles. The latter reaction is relatively slow with an average time constant of 230 ps. It involves roughly half of the primary generated charges, and the second half relaxes by the interlayer charge recombination. The resulting state with a porphyrin cation and electron in TiO2 has an extremely long lifetime and recombines with an average time constant of 23 ms.
- 29 December 2014
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 31 (3) , 944-952
Photophysical Study of a Self-Assembled Donor–Acceptor Two-Layer Film on TiO2
The self-assembled monolayer (SAM) technique was employed to fabricate a two-layer donor–acceptor film on the surface of TiO2. The approach is based on using donor and acceptor compounds with anchoring groups of different lengths. The acceptor, a fullerene derivative, has a carboxyl anchor attached to the fullerene moiety via a short linker that places the fullerene close to the surface. The donor, a porphyrin derivative, is equipped with a long linker that can penetrate between the fullerenes and keep porphyrin on top of the fullerene layer. The two-layer fullerene–porphyrin structures were deposited on a mesoporous film of TiO2 nanoparticles by immersing the TiO2 film sequentially into fullerene and porphyrin solutions. Transient absorption spectroscopy studies of the samples revealed that after the selective photoexcitation of porphyrin a fast (2 nanoparticles. The latter reaction is relatively slow with an average time constant of 230 ps. It involves roughly half of the primary generated charges, and the second half relaxes by the interlayer charge recombination. The resulting state with a porphyrin cation and electron in TiO2 has an extremely long lifetime and recombines with an average time constant of 23 ms.
- 13 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 118 (8) , 1420-1429
Effect of Mutual Position of Electron Donor and Acceptor on Photoinduced Electron Transfer in Supramolecular Chlorophyll–Fullerene Dyads
In this study we have explored the influence of mutual position of chlorin electron donor and fullerene C60 electron acceptor on photoinduced electron transfer. Two zinc-chlorin-aza-[18]crown-6 compounds and three pyrrolidino[60]fullerenes with alkyl aminium and varying coordinative moieties were synthesized and used for self-assembling of a set of complexes via two-point binding. The aza[18]crown6 moieties were connected to chlorins via amide linker either at 134 or 174 position, hence, being attached on different sides of the chlorin plane. Furthermore, in the former case, the linker holds the crown closely spaced, whereas, in the latter, the linker gives more space and conformational freedom for the crown with respect to the chlorin macrocycle. The coordinative moieties at fullerene site, 3-pyridine, 4-pyridine, and 3-furan, were built by utilizing the Prato reaction. The two-point binding drove the molecules into specific complex formation by self-assembling; aminium ion was chelated by crown ether, while zinc moiety of chlorin was coordinated by pyridine and furan. Such pairing resulted in distinct supramolecular chlorin-fullerene dyads with defined distance and orientation. The performed computational studies at DFT level in solution, with TPSS-D3/def2-TZVP//def2-SVP, indicated different geometries and binding energies for the self-assembling complexes. Notably, the computations pointed out that for all the studied complexes, the donor–acceptor distances and binding energies were dictated by chirality of pyrrolidino ring at C60. The selective excitation of chlorin chromophore revealed efficient emission quenching in all dyads. The ultrafast spectroscopy studies suggested a fast and efficient photoinduced charge transfer in the dyads. The lifetimes of the charge separated states range from 55 to 187 ps in o-dichlorobenzene and from 14 to 60 ps in benzonitrile. Expectedly, the electron transfer rate was found to be critically dependent on the donor–acceptor distance; additionally, the mutual orientation of these entities was found to have significant contribution on the rate.
- 13 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 118 (8) , 1420-1429
Effect of Mutual Position of Electron Donor and Acceptor on Photoinduced Electron Transfer in Supramolecular Chlorophyll–Fullerene Dyads
In this study we have explored the influence of mutual position of chlorin electron donor and fullerene C60 electron acceptor on photoinduced electron transfer. Two zinc-chlorin-aza-[18]crown-6 compounds and three pyrrolidino[60]fullerenes with alkyl aminium and varying coordinative moieties were synthesized and used for self-assembling of a set of complexes via two-point binding. The aza[18]crown6 moieties were connected to chlorins via amide linker either at 134 or 174 position, hence, being attached on different sides of the chlorin plane. Furthermore, in the former case, the linker holds the crown closely spaced, whereas, in the latter, the linker gives more space and conformational freedom for the crown with respect to the chlorin macrocycle. The coordinative moieties at fullerene site, 3-pyridine, 4-pyridine, and 3-furan, were built by utilizing the Prato reaction. The two-point binding drove the molecules into specific complex formation by self-assembling; aminium ion was chelated by crown ether, while zinc moiety of chlorin was coordinated by pyridine and furan. Such pairing resulted in distinct supramolecular chlorin-fullerene dyads with defined distance and orientation. The performed computational studies at DFT level in solution, with TPSS-D3/def2-TZVP//def2-SVP, indicated different geometries and binding energies for the self-assembling complexes. Notably, the computations pointed out that for all the studied complexes, the donor–acceptor distances and binding energies were dictated by chirality of pyrrolidino ring at C60. The selective excitation of chlorin chromophore revealed efficient emission quenching in all dyads. The ultrafast spectroscopy studies suggested a fast and efficient photoinduced charge transfer in the dyads. The lifetimes of the charge separated states range from 55 to 187 ps in o-dichlorobenzene and from 14 to 60 ps in benzonitrile. Expectedly, the electron transfer rate was found to be critically dependent on the donor–acceptor distance; additionally, the mutual orientation of these entities was found to have significant contribution on the rate.