CLChil Won Lee

Chil Won Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chil Won Lee has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Benzothiophene-fused and bulky donor-shielded blue multiple-resonance emitters for fluorescent OLEDs with improved operational stability

    by Jeong-Yeol Yoo, Da Yeon Shin, Jong-Gyu Kim, Chil Won Lee

    Three t-DABNA-derived blue multiple-resonance (MR) fluorescent emitters, tDAt, BT-tDAt and BT-DPA-tDAt, were developed to clarify the roles of benzothiophene fusion and bulky diarylamine shielding in narrowband blue OLED dopants.

  • Open Access

    Transparent Alicyclic Polyimides Prepared via Copolymerization or Crosslinking: Enhanced Flexibility and Optical Properties for Flexible Display Cover Windows

    by Hyuck-Jin Kwon, Jun Hwang, Suk-Min Hong, Chil Won Lee

    Transparent polyimides with excellent mechanical properties and high optical transmittance have been widely used in various optical and electrical applications. However, due to the rigidity of their aromatic structure, their flexibility is limited, making them unsuitable for applications requiring different form factors, such as flexible display cover windows. Furthermore, the refractive index of most transparent polyimides is approximately 1.57, which differs from that of the optically clear adhesives (OCAs) and window materials that have values typically around 1.5, resulting in visual distortion. This study employed 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and 2,2′-bis(trifluoromethyl)benzidine (TFMB) as the base structure of polyimides (6T). Additionally, 1,3-bis(aminomethyl)cyclohexane (BAC) with a monocyclic structure and bis(aminomethyl)bicyclo[2,2,1]heptane (BBH) with a bicyclic structure were introduced as co-monomers or crosslinking agents to 6T. The mechanical, thermal, and optical properties of the obtained copolymers (6T-BAC and 6T-BBH series) and crosslinked polymers (6T-CL-BAC and 6T-CL-BBH series) were compared. Both the copolymer series (6T-BAC and 6T-BBH) and the crosslinked series (6T-CL-BAC and 6T-CL-BBH) exhibited improved optical properties compared to the conventional 6T, with maximum transmittance exceeding 90% and refractive indices ranging from approximately 1.53 to 1.55. Notably, the copolymer series achieved transmittance levels above 95% and exhibited lower refractive indices (~1.53), demonstrating superior optical performance relative not only to the 6T baseline but also to the crosslinked series. The alicyclic polyimides synthesized in this study exhibited mechanical flexibility, high optical transmittance, and a refractive index approaching 1.5, demonstrating their applicability for use as flexible display cover window materials.


  • Pendant engineering in multiple-resonance thermally activated delayed fluorescence to yield charge-transfer and locally excited-state characteristics

    by Jeong Yeol Yoo, Tae Hoon Ha, Chil Won Lee

    Multiple-resonance thermally activated delayed fluorescence (MR-TADF) materials can exhibit narrow-spectrum characteristics owing to the inhibition of rotation within the molecules. However, the excited states of these MR-TADF materials, which influence the spin–orbit couplings (SOCs) and device efficiencies of organic light-emitting diodes (OLEDs), have not been investigated to date. In this study, we synthesized MR-TADF materials tDABNA-TP, tDABNA-DN, and tDABNA-DOB by incorporating characteristic neutral, donor, and acceptor pendants into 2,12-di-tert-butyl-5,9-bis(4-(tert-butyl)phenyl)-5,9-dihydro-5,9-diaza-13b-boranaphtho[3,2,1-de]anthracene (tDABNA). To determine the effect of pendant engineering, we investigated the excited states of the MR-TADF materials, including their singlet and triplet excited states, calculated the SOCs for their optimal reverse intersystem crossing pathways, and determined their maximum external quantum efficiencies (EQEmax) in OLEDs. The OLED with the emitter bearing the neutral pendant (tDABNA-TP) exhibited the highest EQEmax of 20.7% among those with the emitters bearing the donor (16.6%) and acceptor (12.4%) pendants, with a narrow emission range of 472–492 nm. Furthermore, the device with the tDABNA-TP emitter exhibited an operating lifetime of 196 h, which was 1.42- and 1.92-fold longer than those of the devices with the tDABNA-DN and tDABNA-DOB emitters, respectively. Our findings will promote research on the pendant engineering of MR-TADF-based OLEDs.


  • The effect of positional deuterium substitution on the acceptor moiety for TADF

    by Da Yeon Shin, Jun Sung Lee, Jeong-Yeol Yoo, Jong-Kwan Bin, Chil Won Lee

    Despite the successful commercialization of organic light-emitting diodes (OLEDs), achieving high efficiency and long lifespan in blue OLEDs often requires device structures that incorporate multiple layers featuring two or more blue-emitting layers, highlighting the ongoing challenge of achieving deep-blue OLEDs with extended lifetime. Significant improvements in lifetime have been demonstrated in blue thermally activated delayed fluorescent (TADF) OLEDs by utilizing 5CzBN with positional deuteration. We synthesized three emitters and observed a gradual increase in T60 based on the positioning of benzonitrile as the acceptor, generally reflecting the molecular design of TADF systems such as the donor–π–acceptor configuration. To investigate the effects of deuteration, we measured the decrease in photoluminescence (PL) efficiency following UV irradiation to induce photodegradation. Additionally, we fabricated devices to confirm stability during operation. The photoluminescence (PL) efficiency and lifetime depend on the positional deuteration of the acceptor core. The 5CzBN-D(o,p) emitter, which is deutero-substituted, exhibited greater efficiency and a longer lifespan than 5CzBN-D(m). After 60 minutes of UV exposure, the decrease in PL for 5CzBN-D(o,p) was 53.4%, whereas for 5CzBN-D(m) it was 68%. Furthermore, the lifetime (LT60) of 5CzBN-D(o,p) was 4.61 times longer than that of 5CzBN-D(m). These results indicate that the efficiency and lifetime in donor–π–acceptor chemical structures depend significantly on the position of the core with a strongly electron-withdrawing group.


  • Thermally activated delayed fluorescence emitters with a LUMO-extended boron-containing acceptor for high-efficiency and long-lifetime blue OLEDs

    by Jeong-Yeol Yoo, Seung Wan Kang, Tae Hoon Ha, Chil Won Lee

    Organic light-emitting diodes (OLEDs) exhibiting thermally activated delayed fluorescence (TADF) demonstrate high quantum efficiencies. However, their drawbacks include a short device lifetime and low efficiencies in the high-luminance region. This study synthesizes a blue TADF emitter by modifying robust, stable 5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (DOBNA). By introducing a benzonitrile group into DOBNA as an acceptor with extended π-conjugation and using a carbazole donor, a donor–acceptor–donor structure (DOB-1) is formed. To increase the lifetime and efficiency, carbazole derivative donors substituted with tert-butyl (DOB-2) or phenyl (DOB-3) are introduced at both the 3 and 6 positions to enhance the electron-donating characteristics, achieving a high photoluminescence quantum yield (PLQY), a superior horizontal transition dipole orientation (HTDO) ratio, and fast reverse intersystem crossing (RISC). As-synthesized DOB-2 and DOB-3 exhibit higher PLQYs (0.92 and 0.95) than DOB-1 (0.83), along with fast RISC (∼105 s−1) and better HTDO ratios (0.86 and 0.90) than DOB-1 (0.74). The TADF OLEDs employing DOB-2 and DOB-3 demonstrate 1.69 and 2.05 times higher external quantum efficiencies, respectively. Notably, the DOB-2 and DOB-3-based OLEDs exhibit operational lifetimes (LT50 at 2000 cd m−2) of 706 and 1377 h, which are 2.52 and 4.54 times longer than that of DOB-1 emitters. Our results will advance research on efficient, long-lifetime TADF materials for OLEDs.


  • Open Access

    Synthesis and Characteristic Valuation of a Thermoplastic Polyurethane Electrode Binder for In-Mold Coating

    by Suk-Min Hong, Hyuck-Jin Kwon, Jung-Min Sun, Chil Won Lee

    A polyurethane series (PHEI-PU) was prepared via a one-shot bulk polymerization method using hexamethylene diisocyanate (HDI), polycarbonate diol (PCD), and isosorbide derivatives (ISBD) as chain extenders. The mechanical properties were evaluated using a universal testing machine (UTM), and the thermal properties were evaluated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The PHEI-PU series exhibited excellent mechanical properties with an average tensile strength of 44.71 MPa and an elongation at break of 190%. To verify the applicability of different proportions of PU as an electrode binder, PU and Ag flakes were mixed (30/70 wt%) and coated on PCT substrates, the electrodes were evaluated by four-point probe before and after 50% elongation, and the dispersion was evaluated by scanning electron microscopy (SEM). The electrical resistance change rate of PHEI-PU series was less than 20%, and a coating layer with well-dispersed silver flakes was confirmed even after stretching. Therefore, it exhibited excellent physical properties, heat resistance, and electrical resistance change rate, confirming its applicability as an electrode binder for in-mold coating.

  • Colour-tuning of multiple resonance thermally activated delayed fluorescence emitters for hyperfluorescence with long-lifetime device characteristics

    by Tae Hoon Ha, Jeong Yeol Yoo, Seung Wan Kang, Chil Won Lee

    Thermally activated delayed fluorescence (TADF) materials with multiple resonance (MR) effects have been widely studied owing to their narrow full width at half maximum (FWHM) and high efficiency. In particular, the MR effect is due to the separation of the distribution of the highest occupied molecular orbitals and lowest unoccupied molecular orbitals inside a molecule by the combination of boron and nitrogen, resulting in a low energy gap between the singlet and triplet energies (EST; < 0.3 eV). However, although TADF materials with MR effects have a low ΔEST, they typically exhibit a high oscillator strength. These features favour their use as the final emitting materials in hyperfluorescence (HF) devices. In this study, we synthesise a green TADF material, tBN-4BF, with an MR structure and evaluate its effectiveness in HF devices using known TADF materials, 2,4,5,6-tetrakis(9H-cabazol-9-yl)isophthalonitrile and 3,3′,3′′-(1,3,5-triazine-2,4,6-triyl)tris(4-(9H-carbazol-9-yl)benzonitrile) (TCz-4mCNTrz), as sensitizers. The evaluation shows an FWHM of 35 nm in a single device with an MR dopant in 2-biphenyl-4,6-bis(12-phenylindolo[2,3-a]carbazole-11-yl)-1,3,5-triazine as the host, achieving 29.3 h at LT50@5000 nit. In addition, an HF device utilising TCz-4mCNTrz as a sensitizer achieves 124 h at an LT50@5000 nit. These results demonstrate the potential of green TADF materials and the lifetime of the HF devices in which they are applied.


  • Open Access

    An Attachable/detachable Hybrid Functional Tape for Micro-chip Transcription for High-yield Direct Semiconductors

    by Gwan Seop Lee, Young Gyen Kim, Chil Won Lee, Suk Min Hong, Kwan Young Han

    As the global semiconductor market is growing steadily, the need for optimization of the man-ufacturing process is paramount. For example, in the process of transferring the semiconductor chips to the substrate, each chip needs to be individually separated from the dicing tape via a plunger. In this process, however, the fixed chip is not easily removed from the tape due to strong adhesion, and the chip can become damaged if it is forcibly pulled out. Therefore, the present paper reports the development of functional adhesive tapes that initially adhere strongly to the semi-conductor chip on the dicing tape but can be easily removed after transfer. The fabricated functional tape has an initial adhesion of 350 gf, which enables firm fixing of the semiconductor chip to be transferred, and a final adhesion of 0.8 gf after UV curing, thereby facilitating removal of the chip without damage after transfer. Therefore, the fabricated functional tape is expected to contribute to the optimization of the semiconductor manufacturing process and is expected to be useful in the semiconductor package manufacturing process.