JMJaime Mazarío

Jaime Mazarío

*This is an algorithmically generated author record based on publicly available information.

Jaime Mazarío has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis of ultrasmall Fe-based nanoparticles with tunable magnetic properties: the effect of NHC ligands

    by Oscar Suárez-Riaño, Víctor Varela-Izquierdo, Nicolas Ratel-Ramond, Jaime Mazarío, Sophie Morisset, Christine Canaff, Lise-Marie Lacroix, Bruno Chaudret, Edwin A. Baquero, Simon Tricard

    N-Heterocyclic carbenes are powerful ligands for stabilizing iron nanoparticles. A direct correlation shows that strong carbene binding modulates magnetization and governs the transition between paramagnetic and superparamagnetic regimes.

  • Open Access

    Enhancing Catalyst Stability for Magnetically Induced Aqueous Catalysis: Functionalization with a Hydrosoluble Zwitterionic Amidinate Ligand

    by José Aceituno, Adrián Sánchez, Jaime Mazarío, Rubén Laplaza, Bruno Chaudret, Sergio Rojas‐Buzo, Luis M. Martínez‐Prieto

    The efficient conversion of biomass‐derived compounds into chemicals through aqueous reduction processes is essential for optimal biomass transformation. Herein, we report an efficient strategy to generate stable and water‐compatible magnetic catalysts for the hydrogenation of biomass‐derived compounds in water using magnetically induced catalysis. Core‐shell FeCo@Ni nanoparticles (NPs) have been functionalized with different equivalents of a new hydrosoluble zwitterionic amidinate ligand (IMesPrSO 3 · (p‐tol) NCN) through a ligand exchange process in a biphasic system (FeCo@Ni WS ( n ); n = 0.2, 0.3, and 0.5 equivalents). Their enhanced stability in water, compared to nonfunctionalized FeCo@Ni NPs, was confirmed by dynamic light scattering (DLS) and recycling studies during the hydrogenation of vanillin using magnetic induction heating. FeCo@Ni WS (0.3) was identified as the most promising catalyst since it presents the optimal balance between activity and stability. Furthermore, localized heating at the nanoparticle surface and fast warming times enable efficient transformations under relatively mild bulk conditions and make this process highly suitable for operation under intermittent energy supply.


  • Organometallic Control of Ru Decoration on CoNi: From Isolated Atoms to Nanoparticles

    by Víctor Varela-Izquierdo, Felipe Quiroga-Suavita, Christian Cerezo-Navarrete, Matthew E. Potter, Silvia Gutiérrez-Tarriño, Pier-Francesco Fazzini, Laura Simonelli, Lise-Marie Lacroix, Pascual Oña-Burgos, Jaime Mazarío, et al.

    Engineering surface architectures in multimetallic nanoparticles is crucial for controlling their properties. This work investigates Ru-decorated CoNi nanoparticles prepared by an organometallic approach, yielding Ru as nanoparticles, subnanometric clusters, or isolated atoms. High-resolution electron microscopy (EM) and X-ray absorption spectroscopy (XAS) unambiguously establish these distinct Ru configurations, while X-ray photoelectron spectroscopy (XPS) reveals that Ru binding energies are influenced by coordination environment. Hydrogen-deuterium isotopic exchange further shows that subnanometric Ru maximizes activity, providing superior per-site reactivity. Together, these results demonstrate how the organometallic approach enables the controlled decoration of a platinum-group metal (i.e., Ru) on base metal (i.e., CoNi) nanoparticles, establishing direct correlations between surface architecture, electronic signatures, and potential catalytic functions.


  • Open Access

    MOF-derived PdMn and PdCo bimetallic systems as bifunctional electrocatalysts for overall water splitting

    by Jordan Santiago Martinez, Inmaculada Márquez, Jaime Mazarío, Christian Wittee Lopes, Christian Cerezo-Navarrete, Gonzalo Egea, Giovanni Agostini, Eduardo Villalobos-Portillo, Otman Bazta, Susana Trasobares, et al.


  • Open Access

    Carbon-encapsulated FeNi nanoparticles for efficient magnetically induced levulinic acid hydrogenation

    by Tatiana Zanette, Adrián García-Zaragoza, Jaime Mazarío, Jordan Santiago Martinez, Bruno Chaudret, Christian Cerezo-Navarrete, Pascual Oña-Burgos

    Developing robust and efficient catalysts for magnetic induction heating (MIH) offers a sustainable approach for biomass valorization under mild conditions. Herein, we report a green and scalable synthetic method to prepare FeNi-based magnetic nanoparticles (MagNPs), with different atomic compositions, encapsulated in N-doped graphitic carbon (Fe1NiX@N-G), via single-step pyrolysis of glucose and urea. These bimetallic nanoparticles serve both as efficient heating agents and active catalysts. Among them, Fe1Ni0.25@N-G demonstrated excellent catalytic performance in the magnetically induced hydrogenation of levulinic acid (LA) in aqueous solution, achieving full conversion and complete selectivity to γ-valerolactone (GVL) under mild conditions (63 mT, 320 kHz, 2 kW). Furthermore, the reactivity of Fe1Ni0.25@N-G was tested in the magnetically induced hydrogenation of other biomass-derived substrates of interest, such as 5-hydroxymethylfurfural (HMF), levoglucosenone, and vanillin, showing good activity and selectivity in all cases under mild reaction conditions. Finally, the robust encapsulation of the FeNi NPs in N-doped graphitic carbon strongly improved the stability of the catalyst in aqueous media, enabling its reuse up to four times under acidic conditions (pH ∼2), for LA hydrogenation, and up to eight times under neutral conditions, such as HMF.


  • Exploring 5-hydroxymethylfurfural hydrogenation pathways using NHC-stabilized water-soluble nanoparticles of various metals and alloys

    by Oscar Suárez-Riaño, Jaime Mazarío, Gabriel Mencia, Víctor Varela-Izquierdo, Nicolas Ratel-Ramond, Antonio Martín-Pinillos, Edwin A. Baquero, Luis M. Martínez-Prieto, Simon Tricard, Bruno Chaudret

    The catalytic valorization of 5-hydroxymethylfurfural (5-HMF), a key bio-based platform molecule, is central for sustainable chemical production. In this work, we report the aqueous-phase hydrogenation of 5-HMF using a family of water-soluble nanoparticles stabilized by an N-heterocyclic carbene (IMesPrSO3) ligand. The nanoparticles were comprehensively characterized by BF-TEM, DLS, TGA, ICP-OES, and pair distribution function (PDF) analysis from wide-angle X-ray scattering (WAXS). By only varying the metal core (Ru, Pd, Ir, RuIr2), and slightly modifying the reaction conditions, we accessed a diverse array of high-value products, including 2,5-bis(hydroxymethyl)furan (2,5-BHMF), 2,5-bis(hydroxymethyl)tetrahydrofuran (2,5-BHMTHF), oxidized cyclopentenones, and 1-hydroxyhexane-2,5-dione (HHD), all under environmentally friendly conditions (30–140 °C, 5 bar H2, in water). Specifically, the Ru-based nanoparticles showed high selectivity to 2,5-BHMF (90%) at very mild conditions (30 °C), along with a promising recyclability. Reaction products were identified and quantified through extensive NMR spectroscopy, including 1H, 13C, COSY, HSQC, and HMBC experiments. Our findings demonstrate that these truly colloidal catalytic systems can represent a tuneable and robust platform for green and sustainable biomass transformations.


  • Open Access

    Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water–Gas Shift under Magnetic Induction Heating

    by Adrián García-Zaragoza, José Luis del Río-Rodríguez, Christian Cerezo-Navarrete, Silvia Gutiérrez-Tarriño, M. Asunción Molina, Lucy Costley-Wood, Jaime Mazarío, Bruno Chaudret, Luis M. Martínez-Prieto, Andrew M. Beale, et al.

    Reducing CO2 to CO via the reverse water–gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods.


  • Open Access

    MOF-Derived PdCo and PdMn Systems as Versatile Catalysts in Alkyne Semihydrogenation

    by Jordan Santiago Martinez, Luigi Carpisassi, Gonzalo Egea, Jaime Mazarío, Christian Wittee Lopes, Carmen Mora-Moreno, Susana Trasobares, Luigi Vaccaro, Jose Juan Calvino, Giovanni Agostini, et al.

    This study investigates the structure and catalytic properties of bimetallic nanocomposites derived from PdCo- and PdMn-based metal-organic frameworks. These materials, synthesized via chemical (Q) and thermal treatments (T), resulted in PdCo-QT and PdMn-QT catalysts containing Pd-based nanoparticles modified with Co or Mn and supported on N-doped carbon. Detailed characterization techniques confirm these complex structures, including high-resolution transmission electron microscopy, scanning transmission electron microscopy energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The catalytic performances of these materials were evaluated for the selective semihydrogenation of phenylacetylene and 4-octyne under soft conditions (1 H2 bar, room temperature) in batch reactors, demonstrating very high selectivity (≥95 mol %) toward alkenes at high conversion levels (≥94 mol %). Moreover, they displayed significant stability after five catalytic cycles with minimal leaching and highly competitive values of alkyne productivity in the semihydrogenation of phenylacetylene. The study also explored the potential of these catalysts in continuous gas-phase reactions, where PdCo-QT demonstrated remarkable catalytic activity and selectivity with a high gas hourly space velocity.


  • Open Access

    Structure–reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

    by Jaime Mazarío, Deshetti Jampaiah, Patricia Concepción, Pablo Villasante-Iturria, Karen Wilson, Adam Lee, Marcelo E. Domine

    Selective dehydration of glycerol to acetol was successfully catalysed by Cu/m-ZrO2 with monoclinic zirconia preferentially stabilising the more active Cu(i) species.


  • Open Access

    Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

    by Carmen Galdeano-Ruano, Silvia Gutiérrez-Tarriño, Christian W. Lopes, Jaime Mazarío, Lidia E. Chinchilla, Giovanni Agostini, Jose J. Calvino, Juan P. Holgado, Enrique Rodríguez-Castellón, Alberto Roldan, et al.