EAElchyn Aliiev

Elchyn Aliiev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elchyn Aliiev has a total of 136 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Substantiation of the Design and Operating Parameters of a Vibro-Friction Separator with a Preliminary Separation Device for Small-Seeded Oil Crops

    by Oleksii Kozachenko, Elchyn Aliiev, Yevgeniy Pikh, Andrii Pakhuchyi, Anatolii Mykhailov, Olha Siniaieva, Oleksandr Kozii, Hennadii Tesliuk

    The article presents the scientific results on the design and operating parameters of a vibro-friction separator for separating small-seeded oil crops. The relevance of the study is in the complexity of cleaning and fractionating small-seeded crops, whose physical and mechanical properties exhibit considerable variability in shape, size, mass, elasticity, and friction. The use of vibro-friction separation enables differences in these properties; however, its efficiency largely depends on how the material is fed onto the working surfaces. The study aims to improve the separation efficiency of small-seed mixtures by substantiating the design and operating parameters of a vibro-friction separator equipped with a preliminary separation device. A separator design incorporating a screw feeder was proposed, in which the working surfaces provided a preliminary spatial distribution of the seed mixture components based on their physical and mechanical properties. Numerical simulation and experimental methods were employed to investigate the separation process. The effects of vibration amplitude and frequency, as well as the directional, longitudinal, and transverse inclination angles of the working surface, on separation quality, throughput, and power consumption were determined. Based on the research results, second-order mathematical models were developed to describe relationships between the main process performance indicators and the design and operating factors. The effects of these factors were found to be nonlinear, with interactions occurring between individual factors. Comparison of the numerical simulation and experimental results confirmed the consistency of the main patterns governing the motion and separation of the seed mixture. Rational parameters were determined using a multi-criteria approach that considered separation quality, throughput, and energy consumption. For the basic separator design, a separation quality of 87.4 %, a throughput of 264 kg/h, and a power consumption of 0.95 kW were obtained, whereas the design incorporating preliminary separation achieved 92.5 %, 282 kg/h, and 1.04 kW, respectively. The practical significance of the study is in substantiating the design and operating parameters of the vibro-friction separator, thereby improving the quality and throughput of the separation process for small-seeded oil crops.

  • Open Access

    JUSTIFICATION OF THE PARAMETERS OF A VIBRATORY FEEDER OF AN AERODYNAMIC SEPARATOR FOR SEED MIXTURES

    by Ihor Kudriavtsev, Elchin Aliiev, Nataliia Sova

    The issue of improving the efficiency of feeding seed mixture waste into the separation channel of an aerodynamic separator using a vibratory feeder is considered. The need to ensure uniform and stable material feeding, taking into account the feeder capacity and the height of the formed material layer at its outlet, is substantiated. The influence of the frequency and amplitude of oscillations of the vibratory feeder on these technological parameters was investigated. The frequency and amplitude of oscillations were taken as the controlled experimental factors, while the evaluation criteria were the capacity of the vibratory feeder and the height of the seed mixture waste layer (using sunflower as an example) at its outlet. Experimental studies were conducted according to a full factorial design for two factors at three variation levels with three replications. Based on the experimental results, mathematical models describing the dependence of the vibratory feeder capacity and the height of the formed material layer on the frequency and amplitude of oscillations were obtained. A significant interrelated effect of the investigated operating parameters on feeder capacity was established. It was determined that the height of the seed mixture waste layer is primarily dependent on the amplitude of oscillations, with its effect being distinctly nonlinear. Technological constraints were established, according to which the height of the material layer at the outlet of the vibratory feeder should not exceed 0.036 m, while its capacity should be within the range of 50–150 kg/h. Based on a combined analysis of the obtained mathematical relationships, a rational oscillation amplitude of Aᵥ ≈ 1.5 mm was substantiated. The possibility of regulating the vibratory feeder capacity at this amplitude by varying the oscillation frequency was established. The proposed approach provides a basis for automated control of the material feeding intensity into the separation channel using a MikroD3 microprocessor controller.

  • Open Access

    TECHNICAL AND TECHNOLOGICAL SUPPORT FOR FEED MATERIAL MIXING

    by Elchyn Aliiev, Ruslan Ponomarenko

    The article presents the results of a review study of modern approaches to feed material mixing and structural and technological solutions for mixing equipment used in compound feed production. The importance of high-quality mixing of complete feed, premixes, and protein-mineral-vitamin supplements for ensuring stable nutritional value, safety, and efficiency of animal feeding is substantiated. The main mechanisms of bulk material mixing-convective, diffusive, and shear mixing-as well as the features of their interaction at different stages of the technological process are analyzed. It has been established that, alongside the positive effect of these mechanisms on mixture uniformity, the possibility of segregation, remixing-induced re-segregation, and local accumulation of individual components should be taken into account. The main groups of mixture uniformity indices are considered, including variance-based indices, contact indices, and distance-based indices. The feasibility of using relative standard deviation as a practical criterion for assessing the uniformity of compound feed component distribution is demonstrated. The main designs of feed material mixers are analyzed, and their advantages and disadvantages are identified with regard to material movement patterns, energy consumption, mixing intensity, and susceptibility of components to segregation. The prospects of using Y- and V-shaped mixers in batch production of compound feed and premixes are substantiated. A structural and technological design of a Y-shaped bulk material mixer with a stepper-motor drive, gate servomotors, a damping system, an accelerometer, a rhombus-shaped distributor, and an automated control system is proposed. The application of these technical solutions creates the prerequisites for improving mixture uniformity, reducing mixing time, expanding the range of controllable operating modes, and decreasing energy consumption. The review results can be used for further substantiation of the structural parameters and operating modes of mixing equipment.

  • ANALYTICAL SUBSTANTIATION OF THE INFLUENCE OF PULSATION PARAMETERS AND TEAT LINER CHARACTERISTICS ON MILK FLOW INTENSITY

    by Elchyn Aliiev, Yevhenii Nosenko

    The article presents the results of theoretical studies of the milk flow process in the biotechnical system “animal – milking machine”. An analytical substantiation of the influence of pulsation parameters and the elastic-deformation characteristics of the teat liner on milk flow intensity was carried out. The machine milking process is considered as a complex dynamic system in which the operating vacuum, pulsation modes, teat liner tension force, and physiological characteristics of the animal teat interact simultaneously. Bernoulli’s equation and hydrodynamic analysis methods were used to describe milk movement through the teat canal. The variation in milk flow rate during the pulsation cycle was described using a piecewise-continuous function that takes into account the phases of flow increase, stabilization, decrease, and residual milk leakage. The elastic-deformation state of the teat liner was determined on the basis of Hooke’s law and the equations of deformable body mechanics. Analytical dependences were obtained that make it possible to evaluate the influence of the operating vacuum, pulsation phase duration, and teat liner tension force on milk flow velocity. Based on the results of theoretical calculations, rational operating parameters of the milking equipment were determined, ensuring maximum milk flow intensity while minimizing mechanical stress on teat tissues. The obtained results can be used for improving the design of milking machines and increasing the efficiency of machine milking. The proposed theoretical model makes it possible to comprehensively evaluate the relationship between vacuum режим parameters, pulsation characteristics, and the mechanical effect of the teat liner on teat tissues. The research results can be used to substantiate energy-efficient and physiologically safe operating modes of milking machines in modern machine milking systems.

  • Open Access

    Multi-Criteria Optimization of Disk Tillage Implements with Adjustable Elastic Shanks by Substantiating Design and Operating Parameters

    by Oleksii Kozachenko, Elchyn Aliiev, Serhii Dyakonov, Andrii Pakhuchyi, Oleksandr Volkovskii, Pavlo Luts

    The research presents numerical and experimental investigations of a disk working element mounted on an elastic shank with a stiffness regulator. Using numerical simulation in SolidWorks, the distributions of stresses and deformations in the shank, their amplitude-frequency characteristics, and the influence of geometric parameters and disk orientation angles on system performance were determined. The analysis showed that the maximum absolute deformations at the disk attachment point and frame connection vary between 0.12 and 0.38 mm, while the maximum stresses in the shank and stiffness regulator range from 85 to 240 MPa, depending on design parameters. The optimal shank parameters ensured vibration stability in different directions and effective interaction between the disk and the soil, minimizing energy consumption and providing uniform surface tillage. Experimental tests conducted in a soil bin confirmed the patterns of variation in the draft force acting on the frame and on individual points of the shank, the vibration frequency of the working element, and soil compaction depending on the disk penetration depth, the travel speed of the implement, and the angle of the wedge-shaped insert. The results enabled the determination of rational operating parameters for the disk element that achieve an optimal balance between energy efficiency, stability of dynamic regimes, and soil tillage quality. The frame draft force varied in the range of 430–780 N, while local forces at the shank reached 310–690 N and 280–640 N, respectively. The vibration frequency of the working element was observed within 50–63 Hz. The results showed that the soil compaction coefficient ranged from 0.44 to 0.72, with a reduction of up to 39 % under optimal conditions. Overall, the proposed methodology combines numerical modeling with full-scale experiments, enabling comprehensive optimization of the design and technological characteristics of disk implements. The use of adjustable elastic shanks increases soil tillage efficiency, reduces draft resistance, and improves soil structure formation, making the proposed design suitable for modern resource-saving agricultural technologies.

  • Open Access

    ANALYTICAL STUDIES OF THE STRUCTURAL AND OPERATING PARAMETERS OF THE COLLECTOR OF AN ADAPTIVE MILKING MACHINE

    by Elchyn Aliiev, Volodymyr Govorukha, Оlexander Tolstenko

    The paper addresses the problem of improving the efficiency of machine milking by enhancing the design of the milking machine collector with due consideration of the physiological characteristics of animals. It is shown that most commercial collectors operate under fixed regimes and do not provide individual adaptation of vacuum parameters to variations in milk flow intensity, which may result in incomplete milk extraction, longer milking time, and negative effects on udder health. The purpose of the study is to develop the design of an adaptive milking machine collector and to analytically substantiate its structural and operating parameters that ensure stable transportation of the milk–air mixture and optimal milking conditions. The object of the research is the operation process of the collector as part of a two-stroke milking machine, while the subject of the research is the relationships between its geometric parameters and operating modes. An adaptive collector design with additional air chambers, a membrane–valve mechanism, and an adjustable throttle channel is proposed. Using analytical, computational-graphical, and physical–mathematical methods, the relationships between the throttle orifice diameter and air flow rate, the diameter of the milk hose outlet and the parameters of the milk–air mixture, as well as between the operating parameters of the milking machine and the volume of the collector milk chamber, were established. Rational values of the design parameters were substantiated: throttle channel diameter of 1.1–2.7 mm, milk hose outlet diameter of 8–16 mm, and milk chamber volume of 121 cm³. Pulsograms of the milking machine operation with the developed collector were constructed, and the durations of the operating strokes and vacuum pressure levels were determined. The obtained results confirm the feasibility of using an adaptive milking collector to increase milking speed, stabilize the vacuum regime, and improve the operating conditions of milking installations.

  • Open Access

    SIMULATION RESULTS OF A NICHE OILSEED MEAL SEPARATOR

    by Elchyn Aliiev, Illia Lytvynov

    The separation processes of bulk materials are an integral part of technological lines for oilseed processing, particularly at the stage of crushed meal handling. Niche oilseeds are characterized by significant variability in physicomechanical properties, heterogeneous particle size distribution, and a tendency of the material to agglomerate, which complicates the sieving process and leads to intensive clogging of sieve openings. This results in reduced throughput of separators, losses of fine fractions, and decreased energy efficiency of the equipment. This study presents a numerical investigation of the brushing separation process of crushed meal from niche oilseeds using the Discrete Element Method (DEM) in the Simcenter Star-CCM+ software package. A three-dimensional model of a brush separator with a cylindrical sieve was constructed, accounting for the contact interactions between material particles, flexible brush fibers, and the structural elements of the sieve. The influence of key structural and operational parameters, including the diameter of the cylindrical sieve, brush rotation frequency, brush inclination angle, and material mass, on the sieving efficiency and sieve clogging coefficient was analyzed. The analysis of visual and quantitative simulation results showed that the brush simultaneously performs transport, intensification, and cleaning functions, ensuring active material mixing, enhanced passage of fine fractions, and prevention of sieve opening blockage. It was determined that the kinetics of fine fraction sieving follow an exponential pattern, whereas sieve clogging develops linearly over time. Based on statistical processing of the results, second-order regression models were obtained that adequately describe the nonlinear influence of parameters on process efficiency indicators. An optimal combination of parameters was identified, ensuring a sieving efficiency of at least 95% with minimal sieve clogging. The obtained results can be used to justify design solutions and optimal operating modes of brush separators under industrial conditions.

  • Open Access

    Research on the optimal design and process parameters of a castor seed cleaning machine

    by Elchyn Aliiev, Valentyn Holovchenko, Olha Aliieva

    In�the context of�the modern EU bioeconomy, the use of�industrial crops, particularly castor beans (Ricinus communis�L.), is�relevant for the production of�industrial and energy products without competing with food crops. Castor oil is�used fo...

  • ANALYTICAL STUDY OF THE INTERACTION OF THE ANGLE OF ELEVATION OF THE BOWL TRAY OF A SPIRAL VIBRATORY FEEDER FOR DOSING A SINGLE SUNFLOWER PRODUCT WITH ITS STRUCTURAL, TECHNOLOGICAL AND OPERATING PARAMETERS

    by Elchyn Aliiev, Olexandr Chernii

    The article updates the research on optimizing the design and technological parameters of a spiral vibrating feeder for dosing sunflower seeds in automated phenotyping lines. A review of research on optimizing the value of the elevation angle of the vibrating feeder tray is presented. An analytical dependence for determining the limiting elevation angle of the vibrating feeder tray is obtained, which combines the established design and technological and operating parameters of the vibrating feeder: the coefficient of friction of the seeds f on the tray material, the angle of deviation of the inertia force β from the vertical, the amplitude of oscillations A of the bowl and its oscillation frequency ω. It was established that with an increase in the coefficient of friction of the seeds on the vibrating feeder tray, the limiting elevation angle of the tray also increases, and there is also an increase in the limiting angle with a decrease in the circular frequency of oscillations of the vibrating feeder bowl. The condition of self-braking of sunflower seeds on the spiral tray of the vibrating feeder in a stopped state was checked. In the Simcenter Star-CCM+ software package, a DEM model of sunflower seeds was created and numerical simulation of its movement along the vibrating tray was performed. By changing the values of the independent factors: α− the angle of elevation of the chute, ψ− the angle of throw and δ − the angle of inclination of the track axis to the horizontal, a factorial experiment was conducted according to plan 33. An analytical dependence of the change in the angle of elevation of the tray α depending on the values of the seed movement speed V, the throw angle ψ and the angle of inclination of the track axis to the horizontal δ was obtained. It was established that with the range of seed movement speeds along the spiral tray of the vibrating feeder V= 0.019÷0.028 m/s, the specified productivity of the vibrating feeder is ensured. The final value of the angle α was taken to be 2.4°. The calculated design parameters of the vibrating feeder will contribute to the movement of seeds in a continuous mode with an overload coefficient of about one, which will reduce the likelihood of injury to the seed material. The research steps in the plan for studying a spiral vibrating feeder for dosing sunflower seeds include the creation of an experimental sample of a vibrating feeder according to the adopted design and technological parameters and experimentally established actual indicators of the quality of its work using their comparison with theoretical ones, which is necessary to assess the overall accuracy of the study.