Juan Giner-Navarro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Juan Giner-Navarro has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Luis Baeza
Universitat Politècnica de València
7 shared publications - David J. Thompson
Institute of Sound and Vibration Research, University of Southampton, Southampton, UK
3 shared publications - José Martínez-Casas
Univ Politecn Valencia, Inst Ingn Mecan & Biomecan, Camino Vera s-n, Valencia 46022, Spain
3 shared publications - Ana María Pedrosa
Universitat Politècnica de València
2 shared publications Francisco D. Denia
2 shared publications- Antonio Correcher
Departamento de Ingeniería Mecánica y de Materiales, Universitat Politècnica de València
1 shared publication
Latest Publications
- 17 November 2026
- Published by Springer Nature
- p. 119-126
Modelling of Railway Wheelsets in Turnouts Incorporating Real Contact Geometry
- 17 November 2026
- Published by Springer Nature
- p. 119-126
Modelling of Railway Wheelsets in Turnouts Incorporating Real Contact Geometry
- Open Access
- 22 May 2025
- Published by Asociación Española de Ingeniería Mecánica (AEIM) in Anales de Ingeniería Mecánica
- Vol. 1 (24)
Uso de herramientas de visión artificial para la estimación de la fuerza de contacto entre pantógrafo y catenaria ferroviaria
La interacción entre el pantógrafo y la catenaria en sistemas ferroviarios es clave para garantizar una captación de corriente eficiente. Los problemas asociados son, por un lado, desgaste excesivo cuando las fuerzas de contacto son demasiado elevadas y, en el lado opuesto, la aparición de despegues cuando el valor de la dicha fuerza es reducido. Estos despegues, además de interrumpir el suministro de corriente, pueden generar arcos eléctricos que aceleran el desgaste de los elementos en contacto. Por esta razón, la normativa ferroviaria emplea la desviación típica de la fuerza de contacto como el principal indicador de calidad del sistema de captación de corriente. La medida de la fuerza de contacto en vía se realiza mediante trenes auscultadores dotados de pantógrafos instrumentados. Sin embargo, esta técnica presenta limitaciones como la influencia en el comportamiento dinámico del pantógrafo de los dispositivos empleados en la medida (acelerómetros o células de carga) o su coste económico, entre otros. Ante esta problemática, surge la necesidad de desarrollar métodos no invasivos, fiables y de bajo coste para un monitoreo continuo y eficiente. En este trabajo propone una metodología no invasiva basada en técnicas de visión artificial para estimar la fuerza de contacto a través del análisis del movimiento del pantógrafo capturado por cámaras de alta resolución. Usando un modelo dinámico lineal del pantógrafo y algoritmos como filtros de Kalman, se busca inferir la fuerza de contacto a partir del desplazamiento, velocidad o aceleración obtenida mediante el procesado de las imágenes. La validación de la metodología se realizará en un banco de ensayos instrumentado, el cual está equipado con cámaras, acelerómetros y células de carga. Los ensayos se gobiernan desde un sistema dotado con un controlador en tiempo real que garantiza la sincronización. La técnica podría ser adaptable a cualquier vehículo ferroviario, permitiría planes de mantenimiento personalizados y la reducción de costes, marcando un avance significativo en la sostenibilidad y eficiencia de los sistemas ferroviarios.
- 22 May 2025
- Published by Asociación Española de Ingeniería Mecánica (AEIM) in Anales de Ingeniería Mecánica
- Vol. 1 (24)
Open AccessUso de herramientas de visión artificial para la estimación de la fuerza de contacto entre pantógrafo y catenaria ferroviaria
La interacción entre el pantógrafo y la catenaria en sistemas ferroviarios es clave para garantizar una captación de corriente eficiente. Los problemas asociados son, por un lado, desgaste excesivo cuando las fuerzas de contacto son demasiado elevadas y, en el lado opuesto, la aparición de despegues cuando el valor de la dicha fuerza es reducido. Estos despegues, además de interrumpir el suministro de corriente, pueden generar arcos eléctricos que aceleran el desgaste de los elementos en contacto. Por esta razón, la normativa ferroviaria emplea la desviación típica de la fuerza de contacto como el principal indicador de calidad del sistema de captación de corriente. La medida de la fuerza de contacto en vía se realiza mediante trenes auscultadores dotados de pantógrafos instrumentados. Sin embargo, esta técnica presenta limitaciones como la influencia en el comportamiento dinámico del pantógrafo de los dispositivos empleados en la medida (acelerómetros o células de carga) o su coste económico, entre otros. Ante esta problemática, surge la necesidad de desarrollar métodos no invasivos, fiables y de bajo coste para un monitoreo continuo y eficiente. En este trabajo propone una metodología no invasiva basada en técnicas de visión artificial para estimar la fuerza de contacto a través del análisis del movimiento del pantógrafo capturado por cámaras de alta resolución. Usando un modelo dinámico lineal del pantógrafo y algoritmos como filtros de Kalman, se busca inferir la fuerza de contacto a partir del desplazamiento, velocidad o aceleración obtenida mediante el procesado de las imágenes. La validación de la metodología se realizará en un banco de ensayos instrumentado, el cual está equipado con cámaras, acelerómetros y células de carga. Los ensayos se gobiernan desde un sistema dotado con un controlador en tiempo real que garantiza la sincronización. La técnica podría ser adaptable a cualquier vehículo ferroviario, permitiría planes de mantenimiento personalizados y la reducción de costes, marcando un avance significativo en la sostenibilidad y eficiencia de los sistemas ferroviarios.
- 2 November 2023
- Published by Universitat Politecnica de Valencia
- p. 554
Diseño y cálculo de sistemas de transporte continuo de mercancías
Actualmente se dispone de poca información técnica de carácter formativo en español para el ámbito de la ingeniería industrial relativa al transporte continuo de mercancías. De esta necesidad, surge este libro que recoge tanto la descripción de diferentes sistemas de transporte continuo de mercancías (a granel y en forma de carga unitaria variada) en instalaciones industriales, como la introducción de los conceptos básicos necesarios que permiten el diseño y cálculo de este tipo de equipamientos de manutención. Su contenido puede ser utilizado como material técnico y divulgativo de consulta. Se ha estructurado en capítulos que pueden ser leídos y revisados de forma independiente y se ha tratado de mostrar la información con el necesario rigor técnico que exige la descripción de sistemas, diseños y soluciones constructivas en las diferentes instalaciones industriales de transporte continuo de mercancías, pero sin abandonar el carácter divulgativo y gráfico, para lo cual se han incluido numerosas imágenes y ejemplos representativos. La obra está dirigida a estudiantes de posgrado que cursan materias en el ámbito de la ingeniería industrial y la manutención de mercancías, aunque puede ser también utilizada por técnicos y especialistas que desempeñan su labor profesional en el sector del transporte de mercancías e instalaciones industriales de manutención continua
- 2 November 2023
- Published by Universitat Politecnica de Valencia
- p. 554
Diseño y cálculo de sistemas de transporte continuo de mercancías
Actualmente se dispone de poca información técnica de carácter formativo en español para el ámbito de la ingeniería industrial relativa al transporte continuo de mercancías. De esta necesidad, surge este libro que recoge tanto la descripción de diferentes sistemas de transporte continuo de mercancías (a granel y en forma de carga unitaria variada) en instalaciones industriales, como la introducción de los conceptos básicos necesarios que permiten el diseño y cálculo de este tipo de equipamientos de manutención. Su contenido puede ser utilizado como material técnico y divulgativo de consulta. Se ha estructurado en capítulos que pueden ser leídos y revisados de forma independiente y se ha tratado de mostrar la información con el necesario rigor técnico que exige la descripción de sistemas, diseños y soluciones constructivas en las diferentes instalaciones industriales de transporte continuo de mercancías, pero sin abandonar el carácter divulgativo y gráfico, para lo cual se han incluido numerosas imágenes y ejemplos representativos. La obra está dirigida a estudiantes de posgrado que cursan materias en el ámbito de la ingeniería industrial y la manutención de mercancías, aunque puede ser también utilizada por técnicos y especialistas que desempeñan su labor profesional en el sector del transporte de mercancías e instalaciones industriales de manutención continua
- Open Access
- 4 April 2023
- Published by Universitat Politecnica de Valencia in Multidisciplinary Journal for Education, Social and Technological Sciences
- Vol. 10 (1) , 1-22
Analysis of the integration of Sustainable Development Goals in the Industrial Engineering Degree Course
Universities play a key role in transforming society, which necessarily leads them to promote the Sustainable Development Goals (SDG) laid down in the UN’s 2030 Agenda. The Escuela Técnica Superior de Ingeniería Industrial (ETSII) of the Universitat Politècnica de València (UPV) is working on a project to design and develop strategies and interventions to include the SDGs in their degree courses. For this, the present paper proposes a map of the industrial subjects in both the BSc in Engineering in Industrial Technologies and the MSc in Industrial Engineering to determine how far the SDGs have been incorporated into these courses. An exhaustive review of the syllabus of the related subjects was carried out, together with a diagnosis of the current status of the SDG concepts so far included. The subsequent analysis of the data identified the possibilities of each subject to develop a sense of responsibility for educating students in the SDGs.
- 4 April 2023
- Published by Universitat Politecnica de Valencia in Multidisciplinary Journal for Education, Social and Technological Sciences
- Vol. 10 (1) , 1-22
Open AccessAnalysis of the integration of Sustainable Development Goals in the Industrial Engineering Degree Course
Universities play a key role in transforming society, which necessarily leads them to promote the Sustainable Development Goals (SDG) laid down in the UN’s 2030 Agenda. The Escuela Técnica Superior de Ingeniería Industrial (ETSII) of the Universitat Politècnica de València (UPV) is working on a project to design and develop strategies and interventions to include the SDGs in their degree courses. For this, the present paper proposes a map of the industrial subjects in both the BSc in Engineering in Industrial Technologies and the MSc in Industrial Engineering to determine how far the SDGs have been incorporated into these courses. An exhaustive review of the syllabus of the related subjects was carried out, together with a diagnosis of the current status of the SDG concepts so far included. The subsequent analysis of the data identified the possibilities of each subject to develop a sense of responsibility for educating students in the SDGs.
- Open Access
- 4 October 2022
- Published by Universitat Politecnica de Valencia in Multidisciplinary Journal for Education, Social and Technological Sciences
- Vol. 9 (2) , 23-45
Working on Critical Thinking skills using the computer lab works of an Engineering subject
A practical intervention was devised in order to promote and to assess Critical Thinking in undergraduate students of Engineering. First, in collaboration with specialists in education, the concept of Critical Thinking, and its skills and dispositions on which to focus on, was determined. Second, a teaching strategy was designed in order to be as effective as possible, considering the limitations of the intervention. This strategy took advantage of the computer lab sessions where discussion and questioning encouraged the development of Critical Thinking. Then, the instruments to assess the acquired skills and attitudes of the students were developed. Finally, a quantitative analysis of the results was conducted in order to evaluate the validity and reliability of the strategy. This paper presents a full description of the intervention carried on for two years. Besides the desired effects on the students’ performance, some conclusions regarding the development of appropriate instruments to deal with a large group of students are drawn. This intervention has proven to be effective in order to help the students to develop their Critical Thinking skills, and it is particularly suitable for large groups.
- 4 October 2022
- Published by Universitat Politecnica de Valencia in Multidisciplinary Journal for Education, Social and Technological Sciences
- Vol. 9 (2) , 23-45
Open AccessWorking on Critical Thinking skills using the computer lab works of an Engineering subject
A practical intervention was devised in order to promote and to assess Critical Thinking in undergraduate students of Engineering. First, in collaboration with specialists in education, the concept of Critical Thinking, and its skills and dispositions on which to focus on, was determined. Second, a teaching strategy was designed in order to be as effective as possible, considering the limitations of the intervention. This strategy took advantage of the computer lab sessions where discussion and questioning encouraged the development of Critical Thinking. Then, the instruments to assess the acquired skills and attitudes of the students were developed. Finally, a quantitative analysis of the results was conducted in order to evaluate the validity and reliability of the strategy. This paper presents a full description of the intervention carried on for two years. Besides the desired effects on the students’ performance, some conclusions regarding the development of appropriate instruments to deal with a large group of students are drawn. This intervention has proven to be effective in order to help the students to develop their Critical Thinking skills, and it is particularly suitable for large groups.
- Open Access
- 6 July 2022
- Published by Universitat Politecnica de Valencia
Evaluación de la CT10 – Conocimiento de problemas contemporáneos en asignaturas del ámbito industrial
Evaluación de la CT10 – Conocimiento de problemas contemporáneos en asignaturas del ámbito industrial
- 6 July 2022
- Published by Universitat Politecnica de Valencia
Open AccessEvaluación de la CT10 – Conocimiento de problemas contemporáneos en asignaturas del ámbito industrial
Evaluación de la CT10 – Conocimiento de problemas contemporáneos en asignaturas del ámbito industrial
- 1 November 2020
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 486
Using a 2.5D boundary element model to predict the sound distribution on train external surfaces due to rolling noise
- 1 November 2020
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 486
Using a 2.5D boundary element model to predict the sound distribution on train external surfaces due to rolling noise
- 28 August 2020
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 489, 115665
Reply to “Discussion on ‘Eulerian models of the rotating flexible wheelset for high frequency railway dynamics’ [J. Sound Vib. 449 (2019) 300-314]”
- 28 August 2020
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 489, 115665
Reply to “Discussion on ‘Eulerian models of the rotating flexible wheelset for high frequency railway dynamics’ [J. Sound Vib. 449 (2019) 300-314]”
- 13 June 2019
- Published by Wiley in Mathematical Methods in the Applied Sciences
- Vol. 43 (14) , 7915-7933
Efficient decoupling technique applied to the numerical time integration of advanced interaction models for railway dynamics
Railway interaction is characterised by the coupling between the train and the track introduced through the wheel/rail contact. The introduction of the flexibility in the wheelset and the track through the finite element (FE) method in the last four decades has permitted to study high‐frequency phenomena such as rolling noise and squeal, whose origin lies in the strongly non‐steady state and non‐linear behaviour of the contact forces that arise from the small contact area. In order to address models with a large number of degrees of freedom, innovative Eulerian‐modal models for wheelsets with rotation and cyclic tracks have been developed in recent years. The aim of this paper is to extend the resulting formulation to an uncoupled linear matrix equation of motion that allows solving each equation independently for each time step, considerably reducing the associated computational cost. The decoupling integration method proposed is compared in terms of computational performance with Newmark and Runge‐Kutta schemes, commonly used in vehicle dynamics, for simulations with the leading wheelset negotiating a tangent track and accounting the rail roughness.
- 13 June 2019
- Published by Wiley in Mathematical Methods in the Applied Sciences
- Vol. 43 (14) , 7915-7933
Efficient decoupling technique applied to the numerical time integration of advanced interaction models for railway dynamics
Railway interaction is characterised by the coupling between the train and the track introduced through the wheel/rail contact. The introduction of the flexibility in the wheelset and the track through the finite element (FE) method in the last four decades has permitted to study high‐frequency phenomena such as rolling noise and squeal, whose origin lies in the strongly non‐steady state and non‐linear behaviour of the contact forces that arise from the small contact area. In order to address models with a large number of degrees of freedom, innovative Eulerian‐modal models for wheelsets with rotation and cyclic tracks have been developed in recent years. The aim of this paper is to extend the resulting formulation to an uncoupled linear matrix equation of motion that allows solving each equation independently for each time step, considerably reducing the associated computational cost. The decoupling integration method proposed is compared in terms of computational performance with Newmark and Runge‐Kutta schemes, commonly used in vehicle dynamics, for simulations with the leading wheelset negotiating a tangent track and accounting the rail roughness.
- 1 June 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 449, 300-314
Eulerian models of the rotating flexible wheelset for high frequency railway dynamics
- 1 June 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 449, 300-314
Eulerian models of the rotating flexible wheelset for high frequency railway dynamics