Feng Jiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Feng Jiao has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Yongqing He
Department of Energy and Environment, Southeast University, Nanjing 211189, China
13 shared publications Juan Du
3 shared publicationsYuxiang Hong
3 shared publicationsGuiye Wen
School of Chemical Engineering, Kunming University of Science and Technology 1 , Kunming 650500
2 shared publicationsJianfeng Hua
2 shared publicationsJin Wang
2 shared publications
Latest Publications
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
How does a sessile drop capture a rolling solid sphere?
Anti-dusting, self-cleaning, and particle screening all require capturing rigid particles using liquid drops. However, few studies have examined the process and mechanism by which a sessile drop captures particles. Here, we experimentally investigated the ability of the sessile drop to capture the rolling solid sphere effectively after the impact. Using water and glycerol as the working fluids, we noted three resulting interaction stages: impacting, moving, and pulling. We determined the critical capture and escape velocities by analyzing the energy conversion. As We < 31.73, a higher capture success rate can be achieved with a smaller size ratio and increased viscosity. Introducing the deformation coefficient β, proportional to the Weber number, demonstrates that significant deformations can significantly influence the capture process. Additionally, we present an empirical correlation equation for critical velocity related to the size ratio α to evaluate the potential for capture. Our research could potentially lead to new applications in open microfluidics.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
How does a sessile drop capture a rolling solid sphere?
Anti-dusting, self-cleaning, and particle screening all require capturing rigid particles using liquid drops. However, few studies have examined the process and mechanism by which a sessile drop captures particles. Here, we experimentally investigated the ability of the sessile drop to capture the rolling solid sphere effectively after the impact. Using water and glycerol as the working fluids, we noted three resulting interaction stages: impacting, moving, and pulling. We determined the critical capture and escape velocities by analyzing the energy conversion. As We < 31.73, a higher capture success rate can be achieved with a smaller size ratio and increased viscosity. Introducing the deformation coefficient β, proportional to the Weber number, demonstrates that significant deformations can significantly influence the capture process. Additionally, we present an empirical correlation equation for critical velocity related to the size ratio α to evaluate the potential for capture. Our research could potentially lead to new applications in open microfluidics.
- Open Access
- 15 July 2025
- Published by Elsevier in Materials Today Bio
- Vol. 33, 102072
Recent progress in field-directed assembly of colloids in an evaporating droplet
- 15 July 2025
- Published by Elsevier in Materials Today Bio
- Vol. 33, 102072
Open AccessRecent progress in field-directed assembly of colloids in an evaporating droplet
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
On the motion of a falling ferrofluid droplet pair under a nonuniform magnetic field
The controlled assembly of ferrofluid droplets under magnetic fields is pivotal for applications in droplet robotics, drug delivery, and microreactors. This study investigates the dynamics of a ferrofluid droplet pair falling in a non-uniform magnetic field, focusing on magnetic and dipole forces influencing their trajectories. Gravity and viscous forces caused the ferrofluid droplets to rotate counterclockwise (1°–10°) when no magnetic field was present. In a non-uniform magnetic field, the pair of droplets falls vertically and oscillates. The magnetic dipole moment would control the motion (0.1–10 μN·m). The interaction force between droplets transitions from repulsive (19° < θ < 48.4°) to attractive (θ ≤ 19°), with clockwise deflection occurring when the contact angle exceeds 48.4°. These findings provide a theoretical basis for precise droplet manipulation in advanced applications.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
On the motion of a falling ferrofluid droplet pair under a nonuniform magnetic field
The controlled assembly of ferrofluid droplets under magnetic fields is pivotal for applications in droplet robotics, drug delivery, and microreactors. This study investigates the dynamics of a ferrofluid droplet pair falling in a non-uniform magnetic field, focusing on magnetic and dipole forces influencing their trajectories. Gravity and viscous forces caused the ferrofluid droplets to rotate counterclockwise (1°–10°) when no magnetic field was present. In a non-uniform magnetic field, the pair of droplets falls vertically and oscillates. The magnetic dipole moment would control the motion (0.1–10 μN·m). The interaction force between droplets transitions from repulsive (19° < θ < 48.4°) to attractive (θ ≤ 19°), with clockwise deflection occurring when the contact angle exceeds 48.4°. These findings provide a theoretical basis for precise droplet manipulation in advanced applications.
- Open Access
- 4 February 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 67
Impact of tube shapes on the energy storage and thermal-hydraulic performances of finned latent heat energy storage systems
- 4 February 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 67
Open AccessImpact of tube shapes on the energy storage and thermal-hydraulic performances of finned latent heat energy storage systems
- 24 December 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 239
Experimental study of melting on graded metal foam composite phase change materials under nonuniform heat flux
- 24 December 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 239
Experimental study of melting on graded metal foam composite phase change materials under nonuniform heat flux
- Open Access
Evaluation of Mixing Process in Batch Mixer Using CFD-DEM Simulation and Automatic Post-Processing Method
A batch mixer is an important piece of equipment for polymer filling modification, and the kinematics of agglomerate breakup and distribution are necessary for the structure design and mixing process optimization of the rotor, particularly in light of the cohesive forces that exist within the agglomerate. In this paper, computational fluid dynamics (CFD) was coupled with discrete element method (DEM) to simulate the mixing process, including breakup and distribution, which was further quantitatively evaluated by the post-processing involving numerical method. To study the mixing process of an agglomerate composed of massive spherical particles (individual particle ratio was r), the coordinates of the particles were exported from the CFD-DEM simulation results. Then, the coordinate data were automatically processed with an automate custom-built post-processing program to obtain the average radius of gyration (Rgy) and the particle distribution density (ε). The kinematics analyzation of breakup and distribution was represented by curve of Rgy/r versus mixing time (t) and curve of ε versus t, respectively. The value of Rgy/r and ε decreased over time until they reached an equilibrium and vibrated around a certain value. In particular, a notable decline in the value of Rgy/r was observed following an increase prior to critical time. The increase in Rgy/r stated that the agglomerate or aggregates undergo stretching deformation. Additionally, mixing processes of rotors with different pressurization coefficients (S) and rotation speeds could be facilitated and intensified by large S and high rotation speed. Finally, a “breakup-line” was developed by considering the influence of cohesive force and rotation speed on the agglomerate breakup process. The agglomerate could be broken if the combination of rotation speed and bonding strength was above the “breakup line”, otherwise the agglomerate was not broken. Furthermore, rotors with larger slopes exhibited stronger breakup ability.
Open AccessEvaluation of Mixing Process in Batch Mixer Using CFD-DEM Simulation and Automatic Post-Processing Method
A batch mixer is an important piece of equipment for polymer filling modification, and the kinematics of agglomerate breakup and distribution are necessary for the structure design and mixing process optimization of the rotor, particularly in light of the cohesive forces that exist within the agglomerate. In this paper, computational fluid dynamics (CFD) was coupled with discrete element method (DEM) to simulate the mixing process, including breakup and distribution, which was further quantitatively evaluated by the post-processing involving numerical method. To study the mixing process of an agglomerate composed of massive spherical particles (individual particle ratio was r), the coordinates of the particles were exported from the CFD-DEM simulation results. Then, the coordinate data were automatically processed with an automate custom-built post-processing program to obtain the average radius of gyration (Rgy) and the particle distribution density (ε). The kinematics analyzation of breakup and distribution was represented by curve of Rgy/r versus mixing time (t) and curve of ε versus t, respectively. The value of Rgy/r and ε decreased over time until they reached an equilibrium and vibrated around a certain value. In particular, a notable decline in the value of Rgy/r was observed following an increase prior to critical time. The increase in Rgy/r stated that the agglomerate or aggregates undergo stretching deformation. Additionally, mixing processes of rotors with different pressurization coefficients (S) and rotation speeds could be facilitated and intensified by large S and high rotation speed. Finally, a “breakup-line” was developed by considering the influence of cohesive force and rotation speed on the agglomerate breakup process. The agglomerate could be broken if the combination of rotation speed and bonding strength was above the “breakup line”, otherwise the agglomerate was not broken. Furthermore, rotors with larger slopes exhibited stronger breakup ability.
- Open Access
- 30 October 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 63
Numerical investigation of the thermal characterization of metallic foams filled with paraffin and featuring double-gradient voids
- 30 October 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 63
Open AccessNumerical investigation of the thermal characterization of metallic foams filled with paraffin and featuring double-gradient voids
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
On the transport of a millimeter-sized compound droplet in a Poiseuille flow
The compound droplet consists of the inner and outer droplets. The outer droplet's ability to isolate the inner contents from its surroundings makes applications such as drug delivery, cell encapsulation, and cell sorting possible. Here, we experimentally explore the transport of the compound droplet at different Reynolds numbers, viscosity ratios, and volume ratios. Compound droplets have a longer dimensionless transport distance along the X-axis than single-phase droplets at Reynolds numbers from 44 to 366. When the Reynolds number is increased from 81.2 to 243.7, the dimensionless maximum transport distance of the compound droplet along the X-axis becomes 2.04 times. As the Re increases, the compound droplet deflection rate decreases continuously. For a constant initial velocity of the compound droplet, an increase in the viscosity ratio leads to an increase in the dimensionless velocity along the x axis with the compound droplet during transport. The maximum transport distance along the x-axis increases, and the deflection rate decreases as the inertial and viscous forces increase with increasing viscosity and dimension ratios. The chemical droplets become more stable as a result.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
On the transport of a millimeter-sized compound droplet in a Poiseuille flow
The compound droplet consists of the inner and outer droplets. The outer droplet's ability to isolate the inner contents from its surroundings makes applications such as drug delivery, cell encapsulation, and cell sorting possible. Here, we experimentally explore the transport of the compound droplet at different Reynolds numbers, viscosity ratios, and volume ratios. Compound droplets have a longer dimensionless transport distance along the X-axis than single-phase droplets at Reynolds numbers from 44 to 366. When the Reynolds number is increased from 81.2 to 243.7, the dimensionless maximum transport distance of the compound droplet along the X-axis becomes 2.04 times. As the Re increases, the compound droplet deflection rate decreases continuously. For a constant initial velocity of the compound droplet, an increase in the viscosity ratio leads to an increase in the dimensionless velocity along the x axis with the compound droplet during transport. The maximum transport distance along the x-axis increases, and the deflection rate decreases as the inertial and viscous forces increase with increasing viscosity and dimension ratios. The chemical droplets become more stable as a result.