Fu-Shun Zhang
Research Subjects
Fu-Shun Zhang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Guang Li
National Key Laboratory of Microwave Imaging Technology Chinese Academy of Sciences Aerospace Information Research Institute Beijing China
3 shared publications - Chao-Qiang Feng
Xidian University, P. R. China
2 shared publications - Gang Zhao
National Key Laboratory of Antennas and Microwave Technology Xidian University Xi'an Shaanxi China
2 shared publications - Kaiwen Yang
National Key Laboratory of Antennas and Microwave Technology Xidian University Xi'an Shaanxi China
2 shared publications - Xiaoming Wang
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
2 shared publications - Yong-Chang Jiao
Xidian University
2 shared publications
Latest Publications
- Open Access
Compact VHF/UHF Ultrawideband Discone Antenna with Consistent Pattern
A compact VHF/UHF ultrawideband discone antenna with consistent patterns is proposed in this article. The proposed antenna consists of a disk, a modified cone, an inverted cone, four shorting probes, and two sleeves. To improve the radiation angular distortion at high frequencies, two sleeves are inserted into the discone antenna. Higher-order modes are suppressed, and ultrawideband consistent patterns are obtained without antenna size increasing. An inverted cone and four shorting probes are introduced to achieve broadband and profile reduction. An antenna prototype is fabricated and measured. The proposed antenna possesses consistent patterns in a 11.36:1 bandwidth. The pattern nulls is improved by 26.1 dB. The antenna occupies a cylindrical volume of 0.227 (D) and 0.096 (H). It is a competitive candidate for future in-vehicle communication systems.Open AccessCompact VHF/UHF Ultrawideband Discone Antenna with Consistent Pattern
A compact VHF/UHF ultrawideband discone antenna with consistent patterns is proposed in this article. The proposed antenna consists of a disk, a modified cone, an inverted cone, four shorting probes, and two sleeves. To improve the radiation angular distortion at high frequencies, two sleeves are inserted into the discone antenna. Higher-order modes are suppressed, and ultrawideband consistent patterns are obtained without antenna size increasing. An inverted cone and four shorting probes are introduced to achieve broadband and profile reduction. An antenna prototype is fabricated and measured. The proposed antenna possesses consistent patterns in a 11.36:1 bandwidth. The pattern nulls is improved by 26.1 dB. The antenna occupies a cylindrical volume of 0.227 (D) and 0.096 (H). It is a competitive candidate for future in-vehicle communication systems. - 22 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ume1, 1-2
A Compact, Wideband Dual-Polarized Full-Duplex Antenna With High Tx-Rx Isolation
A compact, wideband dual-polarized antenna with high isolation is presented for in-band full-duplex application. Based on loading technique, a low-profile tapered slot antenna (TSA) is designed, which makes the structure compact and achieves a wider bandwidth. In order to achieve high isolation, a cross-shaped and symmetric antenna with metallic vias is designed without adding any out-of-phase power divider. The final design with an overall size is $0.52\lambda_{\mathbf{min}} \times 0.52\lambda_{\mathbf{min}} \times 0.32\lambda _{\mathbf{min}}$ ($\lambda_{\mathbf{min}}$ is the free-space wavelength at the lowest operational frequency). The simulation results exhibit a 10 dB return loss bandwidth of 40.2%(3.42--5.14 GHz), an isolation of $\ge$ 64.5 dB over the whole operational bandwidth and peak isolation of 87 dB at 3.8 GHz.- 22 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ume1, 1-2
A Compact, Wideband Dual-Polarized Full-Duplex Antenna With High Tx-Rx Isolation
A compact, wideband dual-polarized antenna with high isolation is presented for in-band full-duplex application. Based on loading technique, a low-profile tapered slot antenna (TSA) is designed, which makes the structure compact and achieves a wider bandwidth. In order to achieve high isolation, a cross-shaped and symmetric antenna with metallic vias is designed without adding any out-of-phase power divider. The final design with an overall size is $0.52\lambda_{\mathbf{min}} \times 0.52\lambda_{\mathbf{min}} \times 0.32\lambda _{\mathbf{min}}$ ($\lambda_{\mathbf{min}}$ is the free-space wavelength at the lowest operational frequency). The simulation results exhibit a 10 dB return loss bandwidth of 40.2%(3.42--5.14 GHz), an isolation of $\ge$ 64.5 dB over the whole operational bandwidth and peak isolation of 87 dB at 3.8 GHz.- 22 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ume1, 1-2
Compact Wideband Pattern-Reconfigurable Antenna Based on Tapered Slot Antenna
This letter presents a wideband planar pattern-reconfigurable antenna built on tapered slot antenna (TSA). The antenna is made up of four TSAs and a feeding unit which is composed of four microstrip lines with balun and four branches. By changing the states of eight PIN diode switches soldered onto the feeding unit and four PIN diode reflection switches bridged onto the patch slots, eight different radiation patterns spaced at 45 -degree intervals in the azimuthal plane can be obtained. The simulation results indicate that the devised antenna can achieve a -10 dB impedance bandwidth of 70.9% (2.84–5.96 GHz), with peak gain ranging from 3.02 to 5.74 dBi (3.26–5.96 GHz). In addition, the total efficiency is not less than 78%. The compact design measures $0.53 \lambda_{\min} \times 0.53 \lambda_{\min} \times 0.005 \lambda_{\min}$.- 22 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. ume1, 1-2
Compact Wideband Pattern-Reconfigurable Antenna Based on Tapered Slot Antenna
This letter presents a wideband planar pattern-reconfigurable antenna built on tapered slot antenna (TSA). The antenna is made up of four TSAs and a feeding unit which is composed of four microstrip lines with balun and four branches. By changing the states of eight PIN diode switches soldered onto the feeding unit and four PIN diode reflection switches bridged onto the patch slots, eight different radiation patterns spaced at 45 -degree intervals in the azimuthal plane can be obtained. The simulation results indicate that the devised antenna can achieve a -10 dB impedance bandwidth of 70.9% (2.84–5.96 GHz), with peak gain ranging from 3.02 to 5.74 dBi (3.26–5.96 GHz). In addition, the total efficiency is not less than 78%. The compact design measures $0.53 \lambda_{\min} \times 0.53 \lambda_{\min} \times 0.005 \lambda_{\min}$.- Open Access
- 29 July 2021
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (11) , e22844
A simple wideband unidirectional antenna with stable symmetrical radiation patterns
In this paper, a simple wideband unidirectional antenna is proposed. The antenna is originated from the basic magneto-electric (ME) dipole antenna. A pair of half-wavelength horizontal patches are used to excite the basic electric dipole mode. In order to excite the basic magnetic dipole mode, the horizontal patches are extended inward. As a result, the quarter-wavelength vertical patches are well excited and the impedance matching is improved in the high frequency band. In addition, a pair of vertical patches are employed, it can not only reduce the resonant frequency of the basic electric dipole mode but also form a new magnetic dipole mode at low-end frequency. Therefore, the impedance matching in the low frequency band is further improved. The proposed antenna is fabricated and measured. A wide bandwidth of 100% from 2.0 to 6.0 GHz for VSWR 10 dB. Moreover, the radiation patterns are stable, symmetrical, and have no side lobe. The proposed antenna is suitable for wideband unidirectional wireless systems.
- 29 July 2021
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (11) , e22844
Open AccessA simple wideband unidirectional antenna with stable symmetrical radiation patterns
In this paper, a simple wideband unidirectional antenna is proposed. The antenna is originated from the basic magneto-electric (ME) dipole antenna. A pair of half-wavelength horizontal patches are used to excite the basic electric dipole mode. In order to excite the basic magnetic dipole mode, the horizontal patches are extended inward. As a result, the quarter-wavelength vertical patches are well excited and the impedance matching is improved in the high frequency band. In addition, a pair of vertical patches are employed, it can not only reduce the resonant frequency of the basic electric dipole mode but also form a new magnetic dipole mode at low-end frequency. Therefore, the impedance matching in the low frequency band is further improved. The proposed antenna is fabricated and measured. A wide bandwidth of 100% from 2.0 to 6.0 GHz for VSWR 10 dB. Moreover, the radiation patterns are stable, symmetrical, and have no side lobe. The proposed antenna is suitable for wideband unidirectional wireless systems.
- 20 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (7) , 1165-1169
A Broadband and Wide-Beamwidth Dual-Polarized Orthogonal Dipole Antenna for 4G/5G Communication
A broadband and wide beamwidth dual-polarized orthogonal dipole antenna for 4G/5G communication is presented in this letter. A pair of orthogonal deformed fan-shaped dipoles are used to obtain dual-polarization. The parasitic elements and metal cavity structure are used to increase the impedance bandwidth effectively. And, the half-power beamwidths (HPBWs) of the antenna is effectively widened by using the metal cavity. Furthermore, a 1 4 antenna array is designed. And the measured HPBWs of E-plane and H-plane radiation patterns is greater than 90 in the operating frequency band of 1.7-3.22 GHz (VSWR < 2.0), and the gain is greater than 0 dBi in the range of 60 pitch angle. And the isolation of the two input ports is higher than 29 dB in the band of 1.7-3.22 GHz (61.8%). Index TermsOrthogonal dipole antenna, dual-polarized, broadband, wide beamwidth.
- 20 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (7) , 1165-1169
A Broadband and Wide-Beamwidth Dual-Polarized Orthogonal Dipole Antenna for 4G/5G Communication
A broadband and wide beamwidth dual-polarized orthogonal dipole antenna for 4G/5G communication is presented in this letter. A pair of orthogonal deformed fan-shaped dipoles are used to obtain dual-polarization. The parasitic elements and metal cavity structure are used to increase the impedance bandwidth effectively. And, the half-power beamwidths (HPBWs) of the antenna is effectively widened by using the metal cavity. Furthermore, a 1 4 antenna array is designed. And the measured HPBWs of E-plane and H-plane radiation patterns is greater than 90 in the operating frequency band of 1.7-3.22 GHz (VSWR < 2.0), and the gain is greater than 0 dBi in the range of 60 pitch angle. And the isolation of the two input ports is higher than 29 dB in the band of 1.7-3.22 GHz (61.8%). Index TermsOrthogonal dipole antenna, dual-polarized, broadband, wide beamwidth.
- Open Access
- 23 January 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (3) , e22541
A low‐profile dual‐band circularly polarized antenna based on artificial magnetic conductor
- 23 January 2021
- Published by Wiley in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 31 (3) , e22541
Open AccessA low‐profile dual‐band circularly polarized antenna based on artificial magnetic conductor
- Open Access
- 1 June 2019
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 18 (2) , 270-275
Wideband Pattern Reconfigurable Printed-Yagi Antenna Array Based on Feed Structure
A pattern reconfigurable antenna array with two elements is designed in this paper. The antenna element is made up of a printed Yagi and feed structure with variable phase. By changing the states of diodes in the feed structure of these two elements, the far-field radiation phase of both elements can be changed. That is, the pattern reconfigurable function of the array is realized. In this way, the impedance bandwidth of array is 75.9% (2.7~6.0 GHz), in which the peak gain direction can be switched between -θ, 0 and +θ (θ = 10°~16° at different frequencies). With the simple reconfigurable structure, the peak gain direction can be adjusted according to demands. It can be applied to broadband investigation systems. To verify the feasibility, a prototype is fabricated, measured, and reasonable agreement between the simulated and measured results is obtained.
- 1 June 2019
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 18 (2) , 270-275
Open AccessWideband Pattern Reconfigurable Printed-Yagi Antenna Array Based on Feed Structure
A pattern reconfigurable antenna array with two elements is designed in this paper. The antenna element is made up of a printed Yagi and feed structure with variable phase. By changing the states of diodes in the feed structure of these two elements, the far-field radiation phase of both elements can be changed. That is, the pattern reconfigurable function of the array is realized. In this way, the impedance bandwidth of array is 75.9% (2.7~6.0 GHz), in which the peak gain direction can be switched between -θ, 0 and +θ (θ = 10°~16° at different frequencies). With the simple reconfigurable structure, the peak gain direction can be adjusted according to demands. It can be applied to broadband investigation systems. To verify the feasibility, a prototype is fabricated, measured, and reasonable agreement between the simulated and measured results is obtained.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A low-cost broadband circularly polarized antenna with integrated feeding network
A broadband directional circularly polarized (CP) antenna is investigated by placing two pairs of parallel dipoles orthogonally in a square plane. The proposed antenna is printed on a planar structure, which integrates a sequential-phase (SP) network on a single substrate. Parasitic stepped-patches are introduced beside the two arms of each dipole to improve the axial ratio (AR) bandwidth. Measurements show that the antenna has a |S 11 |<;-10-dB bandwidth of 1.76-2.64 GHz (40%), a 3-dB AR bandwidth of 1.83-2.65 GHz (36.6%), and a 1-dB gain bandwidth of 1.77-2.6 GHz (38%). These three bandwidths almost cover the same frequency band. In addition, the antenna exhibits a right-hand circular polarization with a peak gain of 8.7 dBic at 2.43 GHz.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A low-cost broadband circularly polarized antenna with integrated feeding network
A broadband directional circularly polarized (CP) antenna is investigated by placing two pairs of parallel dipoles orthogonally in a square plane. The proposed antenna is printed on a planar structure, which integrates a sequential-phase (SP) network on a single substrate. Parasitic stepped-patches are introduced beside the two arms of each dipole to improve the axial ratio (AR) bandwidth. Measurements show that the antenna has a |S 11 |<;-10-dB bandwidth of 1.76-2.64 GHz (40%), a 3-dB AR bandwidth of 1.83-2.65 GHz (36.6%), and a 1-dB gain bandwidth of 1.77-2.6 GHz (38%). These three bandwidths almost cover the same frequency band. In addition, the antenna exhibits a right-hand circular polarization with a peak gain of 8.7 dBic at 2.43 GHz.
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 16, 181-190
WIDEBAND RECTANGULAR DIELECTRIC RESONATOR ANTENNA (DRA) WITH SLOT-FED DESIGN
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 16, 181-190
WIDEBAND RECTANGULAR DIELECTRIC RESONATOR ANTENNA (DRA) WITH SLOT-FED DESIGN
- Open Access
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 18, 195-203
DUAL-POLARIZED DIELECTRIC RESONATOR ANTENNA WITH HIGH ISOLATION USING HYBRID FEEDING MECHANISM FOR WLAN APPLICATIONS
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 18, 195-203
Open AccessDUAL-POLARIZED DIELECTRIC RESONATOR ANTENNA WITH HIGH ISOLATION USING HYBRID FEEDING MECHANISM FOR WLAN APPLICATIONS