Shigetoshi Sugawa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shigetoshi Sugawa has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Rihito Kuroda
Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan
4 shared publications - Yhang Ricardo Sipauba Carvalho da Silva
Graduate School of Engineering, Tohoku University, 6-6-11-811, Aza-Aoba, Aramaki, Aoba-ku, Sendai, Miyagi 980-8579, Japan
2 shared publications - Yuki Sugama
Graduate School of Engineering, Tohoku University, 6-6-11-811, Aza-Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Miyagi, Japan
2 shared publications - Doug Day
Shinkawa USA Inc., Gilbert, AZ, USA
1 shared publication - Hiroshi Hamori
OHT Inc., 1118-1, Nishinakajo, Kannabe-cho, Fukuyama 720-2103, Hiroshima, Japan
1 shared publication - Isao Takayanagi
Brillnics Japan Inc., Tokyo, Japan
1 shared publication
Latest Publications
- Open Access
- 20 December 2022
- Published by The Japan Society of Polymer Processing in Seikei-Kakou
- Vol. 35 (1) , 21-22
Continuous Creation and Productization of Outstanding Image Sensors
- 20 December 2022
- Published by The Japan Society of Polymer Processing in Seikei-Kakou
- Vol. 35 (1) , 21-22
Open AccessContinuous Creation and Productization of Outstanding Image Sensors
- Open Access
Two High-Precision Proximity Capacitance CMOS Image Sensors with Large Format and High Resolution
This paper presents newly developed two high-precision CMOS proximity capacitance image sensors: Chip A with 12 μm pitch pixels with a large detection area of 1.68 cm2; Chip B with 2.8 μm pitch 1.8 M pixels for a higher resolution. Both fabricated chips achieved a capacitance detection precision of less than 100 zF (10−19 F) at an input voltage of 20 V and less than 10 zF (10−20 F) at 300 V due to the noise cancelling technique. Furthermore, by using multiple input pulse amplitudes, a capacitance detection dynamic range of up to 123 dB was achieved. The spatial resolution improvement was confirmed by the experimentally obtained modulation transfer function for Chip B with various line and space pattens. The examples of capacitance imaging using the fabricated chips were also demonstrated.
Open AccessTwo High-Precision Proximity Capacitance CMOS Image Sensors with Large Format and High Resolution
This paper presents newly developed two high-precision CMOS proximity capacitance image sensors: Chip A with 12 μm pitch pixels with a large detection area of 1.68 cm2; Chip B with 2.8 μm pitch 1.8 M pixels for a higher resolution. Both fabricated chips achieved a capacitance detection precision of less than 100 zF (10−19 F) at an input voltage of 20 V and less than 10 zF (10−20 F) at 300 V due to the noise cancelling technique. Furthermore, by using multiple input pulse amplitudes, a capacitance detection dynamic range of up to 123 dB was achieved. The spatial resolution improvement was confirmed by the experimentally obtained modulation transfer function for Chip B with various line and space pattens. The examples of capacitance imaging using the fabricated chips were also demonstrated.
- Open Access
Over 100 Million Frames per Second 368 Frames Global Shutter Burst CMOS Image Sensor with Pixel-wise Trench Capacitor Memory Array
In this paper, a prototype ultra-high speed global shutter complementary metal-oxide-semiconductor (CMOS) image sensor with pixel-wise trench capacitor memory array achieving over 100 million frames per second (fps) with up to 368 record length by burst correlated double sampling (CDS) operation is presented. Over 100 Mfps high frame rate is obtained by reduction of pixel output load by the pixel-wise memory array architecture and introduction of the burst CDS operation which minimizes the pixel driving pulse transitions. Long record length is realized by high density analog memory integration with Si trench capacitors. A maximum 125 Mfps frame rate with up to 368 record length video capturing was confirmed under room temperature without any cooling system. The photoelectric conversion characteristics of the burst CDS operation were measured and compared with those of the conventional CDS operation.
Open AccessOver 100 Million Frames per Second 368 Frames Global Shutter Burst CMOS Image Sensor with Pixel-wise Trench Capacitor Memory Array
In this paper, a prototype ultra-high speed global shutter complementary metal-oxide-semiconductor (CMOS) image sensor with pixel-wise trench capacitor memory array achieving over 100 million frames per second (fps) with up to 368 record length by burst correlated double sampling (CDS) operation is presented. Over 100 Mfps high frame rate is obtained by reduction of pixel output load by the pixel-wise memory array architecture and introduction of the burst CDS operation which minimizes the pixel driving pulse transitions. Long record length is realized by high density analog memory integration with Si trench capacitors. A maximum 125 Mfps frame rate with up to 368 record length video capturing was confirmed under room temperature without any cooling system. The photoelectric conversion characteristics of the burst CDS operation were measured and compared with those of the conventional CDS operation.
- Open Access
An Optical Filter-Less CMOS Image Sensor with Differential Spectral Response Pixels for Simultaneous UV-Selective and Visible Imaging
This paper presents a complementary metal-oxide-semiconductor (CMOS) image sensor (CIS) capable of capturing UV-selective and visible light images simultaneously by a single exposure and without employing optical filters, suitable for applications that require simultaneous UV and visible light imaging, or UV imaging in variable light environment. The developed CIS is composed by high and low UV sensitivity pixel types, arranged alternately in a checker pattern. Both pixel types were designed to have matching sensitivities for non-UV light. The UV-selective image is captured by extracting the differential spectral response between adjacent pixels, while the visible light image is captured simultaneously by the low UV sensitivity pixels. Also, to achieve high conversion gain and wide dynamic range simultaneously, the lateral overflow integration capacitor (LOFIC) technology was introduced in both pixel types. The developed CIS has a pixel pitch of 5.6 µm and exhibits 172 µV/e− conversion gain, 131 ke− full well capacity (FWC), and 92.3 dB dynamic range. The spectral sensitivity ranges of the high and low UV sensitivity pixels are of 200–750 nm and 390–750 nm, respectively. The resulting sensitivity range after the differential spectral response extraction is of 200–480 nm. This paper presents details regarding the CIS pixels structures, doping profiles, device simulations, and the measurement results for photoelectric response and spectral sensitivity for both pixel types. Also, sample images of UV-selective and visible spectral imaging using the developed CIS are presented.
Open AccessAn Optical Filter-Less CMOS Image Sensor with Differential Spectral Response Pixels for Simultaneous UV-Selective and Visible Imaging
This paper presents a complementary metal-oxide-semiconductor (CMOS) image sensor (CIS) capable of capturing UV-selective and visible light images simultaneously by a single exposure and without employing optical filters, suitable for applications that require simultaneous UV and visible light imaging, or UV imaging in variable light environment. The developed CIS is composed by high and low UV sensitivity pixel types, arranged alternately in a checker pattern. Both pixel types were designed to have matching sensitivities for non-UV light. The UV-selective image is captured by extracting the differential spectral response between adjacent pixels, while the visible light image is captured simultaneously by the low UV sensitivity pixels. Also, to achieve high conversion gain and wide dynamic range simultaneously, the lateral overflow integration capacitor (LOFIC) technology was introduced in both pixel types. The developed CIS has a pixel pitch of 5.6 µm and exhibits 172 µV/e− conversion gain, 131 ke− full well capacity (FWC), and 92.3 dB dynamic range. The spectral sensitivity ranges of the high and low UV sensitivity pixels are of 200–750 nm and 390–750 nm, respectively. The resulting sensitivity range after the differential spectral response extraction is of 200–480 nm. This paper presents details regarding the CIS pixels structures, doping profiles, device simulations, and the measurement results for photoelectric response and spectral sensitivity for both pixel types. Also, sample images of UV-selective and visible spectral imaging using the developed CIS are presented.
- Open Access
A 120-ke− Full-Well Capacity 160-µV/e− Conversion Gain 2.8-µm Backside-Illuminated Pixel with a Lateral Overflow Integration Capacitor
In this paper, a prototype complementary metal-oxide-semiconductor (CMOS) image sensor with a 2.8-μm backside-illuminated (BSI) pixel with a lateral overflow integration capacitor (LOFIC) architecture is presented. The pixel was capable of a high conversion gain readout with 160 μV/e− for low light signals while a large full-well capacity of 120 ke− was obtained for high light signals. The combination of LOFIC and the BSI technology allowed for high optical performance without degradation caused by extra devices for the LOFIC structure. The sensor realized a 70% peak quantum efficiency with a normal (no anti-reflection coating) cover glass and a 91% angular response at ±20° incident light. This 2.8-μm pixel is potentially capable of higher than 100 dB dynamic range imaging in a pure single exposure operation.
Open AccessA 120-ke− Full-Well Capacity 160-µV/e− Conversion Gain 2.8-µm Backside-Illuminated Pixel with a Lateral Overflow Integration Capacitor
In this paper, a prototype complementary metal-oxide-semiconductor (CMOS) image sensor with a 2.8-μm backside-illuminated (BSI) pixel with a lateral overflow integration capacitor (LOFIC) architecture is presented. The pixel was capable of a high conversion gain readout with 160 μV/e− for low light signals while a large full-well capacity of 120 ke− was obtained for high light signals. The combination of LOFIC and the BSI technology allowed for high optical performance without degradation caused by extra devices for the LOFIC structure. The sensor realized a 70% peak quantum efficiency with a normal (no anti-reflection coating) cover glass and a 91% angular response at ±20° incident light. This 2.8-μm pixel is potentially capable of higher than 100 dB dynamic range imaging in a pure single exposure operation.
- Open Access
A Highly Robust Silicon Ultraviolet Selective Radiation Sensor Using Differential Spectral Response Method
This paper presents a silicon ultraviolet radiation sensor with over 90% UV internal quantum efficiency (QE) and high selectivity to the UV waveband without using optical filters. The sensor was developed for applications that require UV measurement under strong background visible and near-infrared (NIR) lights, such as solar UV measurement, UV-C monitoring in greenhouses or automated factories, and so on. The developed sensor is composed of monolithically formed silicon photodiodes with different spectral sensitivities: a highly UV responsive photodiode with internal quantum efficiency (QE) of nearly 100% for UV light, and a lowly UV responsive photodiode with UV internal QE lower than 10%. The photodiodes were optimized to match their visible and NIR light responsivity, and the UV signal is extracted from the background radiation by using the differential spectral response method. With this approach, an internal QE of over 90% for UV light was obtained, with a residual internal QE to non-UV light lower than 20% for 400 nm, 5% for 500 nm, 2% for 600 nm and 0.6% to NIR light. The developed sensor showed no responsivity degradation after exposure towards strong UV light. It was confirmed by the simulation results that the residual responsivity is further suppressed by employing an on-chip band-rejection optical layer consisting of several layers of silicon oxide and silicon nitride films.
Open AccessA Highly Robust Silicon Ultraviolet Selective Radiation Sensor Using Differential Spectral Response Method
This paper presents a silicon ultraviolet radiation sensor with over 90% UV internal quantum efficiency (QE) and high selectivity to the UV waveband without using optical filters. The sensor was developed for applications that require UV measurement under strong background visible and near-infrared (NIR) lights, such as solar UV measurement, UV-C monitoring in greenhouses or automated factories, and so on. The developed sensor is composed of monolithically formed silicon photodiodes with different spectral sensitivities: a highly UV responsive photodiode with internal quantum efficiency (QE) of nearly 100% for UV light, and a lowly UV responsive photodiode with UV internal QE lower than 10%. The photodiodes were optimized to match their visible and NIR light responsivity, and the UV signal is extracted from the background radiation by using the differential spectral response method. With this approach, an internal QE of over 90% for UV light was obtained, with a residual internal QE to non-UV light lower than 20% for 400 nm, 5% for 500 nm, 2% for 600 nm and 0.6% to NIR light. The developed sensor showed no responsivity degradation after exposure towards strong UV light. It was confirmed by the simulation results that the residual responsivity is further suppressed by employing an on-chip band-rejection optical layer consisting of several layers of silicon oxide and silicon nitride films.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (5) , 836-844
Improvement of Fundamental Technology of 3-D Thermal Compression Bonding With High Accuracy
Thermal Compression Bonding (TCB) involves three technology themes: high speed and high accuracy motion, substrate-die planarity, and stability for long production runs. We will propose solutions for each of these themes. For high speed and high accuracy motion, we propose a Non-Reaction Servo (NRS) system, which has an XY table with a linear motor coil and stator magnet which float on a base. The system can separate the vibration produced by the reaction force of the linear motor from the moving component. With NRS, we can shorten the settling time from 530 ms to 120 ms with 1um settling accuracy. TCB requires highly accurate planarity between die and substrate. We propose a leaf spring fixed stage planarity adjustment system operated by cam which can achieve much improved planarity of 5.3 μm on a 12 inch stage, compared to 47 μm achieved by manual shim adjustment. We further propose a Reference Positioning System (RPS) which can compensate for bond shift due to thermal expansion during long production runs. RPS has achieved XY +/-2 μm (3 sigma) during continuous 200 IC production. For three-dimensional devices using a flip chip bonder that incorporates our proposed sub-systems, we can bond with less than 2 μm variation in gap height between die and substrate, with each layer’s height variation less than 1um, and with up to 43bonder without NRS.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (5) , 836-844
Improvement of Fundamental Technology of 3-D Thermal Compression Bonding With High Accuracy
Thermal Compression Bonding (TCB) involves three technology themes: high speed and high accuracy motion, substrate-die planarity, and stability for long production runs. We will propose solutions for each of these themes. For high speed and high accuracy motion, we propose a Non-Reaction Servo (NRS) system, which has an XY table with a linear motor coil and stator magnet which float on a base. The system can separate the vibration produced by the reaction force of the linear motor from the moving component. With NRS, we can shorten the settling time from 530 ms to 120 ms with 1um settling accuracy. TCB requires highly accurate planarity between die and substrate. We propose a leaf spring fixed stage planarity adjustment system operated by cam which can achieve much improved planarity of 5.3 μm on a 12 inch stage, compared to 47 μm achieved by manual shim adjustment. We further propose a Reference Positioning System (RPS) which can compensate for bond shift due to thermal expansion during long production runs. RPS has achieved XY +/-2 μm (3 sigma) during continuous 200 IC production. For three-dimensional devices using a flip chip bonder that incorporates our proposed sub-systems, we can bond with less than 2 μm variation in gap height between die and substrate, with each layer’s height variation less than 1um, and with up to 43bonder without NRS.