Jørgen Schartum Dokken
Jørgen Schartum Dokken has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Kristian Valen-Sendstad
Department of Computational Physiology, Simula Research Laboratory, Oslo, Norway
3 shared publications - Simon Wolfgang Funke
Simula Research Laboratory
3 shared publications - August Johansson
SINTEF Digital, Dept. of Mathematics and Cybernetics, Oslo, Norway
2 shared publications - Christopher Ting-Kuang Lee
University of California San Diego
2 shared publications - David A. Bruneau
Department of Mechanical and Industrial Engineering University of Toronto Toronto Canada
2 shared publications - Emmet A. Francis
Department of Pharmacology, University of California San Diego, La Jolla, CA, USA
2 shared publications
Latest Publications
- Open Access
- 14 April 2026
- Published by Springer Nature in Computational Science and Engineering
- Vol. 3 (1)
DefElement: an encyclopedia of finite element definitions
DefElement is an online encyclopedia of finite element definitions that was created and is maintained by the authors of this paper. DefElement aims to make information about elements defined in the literature easily available in a standard format. There are a number of open-source finite element libraries available, and it can be difficult to check that an implementation of an element in a library matches the element’s definition in the literature or implementation in another library, especially when many libraries include variants of elements whose basis functions do not match exactly. In this paper, we carefully derive conditions under which elements can be considered equivalent and describe an algorithm that uses these conditions to verify that two implementations of a finite element are indeed variants of the same element. The results of scheduled runs of our implementation of this verification algorithm are included in the information available on the DefElement website.
- 14 April 2026
- Published by Springer Nature in Computational Science and Engineering
- Vol. 3 (1)
Open AccessDefElement: an encyclopedia of finite element definitions
DefElement is an online encyclopedia of finite element definitions that was created and is maintained by the authors of this paper. DefElement aims to make information about elements defined in the literature easily available in a standard format. There are a number of open-source finite element libraries available, and it can be difficult to check that an implementation of an element in a library matches the element’s definition in the literature or implementation in another library, especially when many libraries include variants of elements whose basis functions do not match exactly. In this paper, we carefully derive conditions under which elements can be considered equivalent and describe an algorithm that uses these conditions to verify that two implementations of a finite element are indeed variants of the same element. The results of scheduled runs of our implementation of this verification algorithm are included in the information available on the DefElement website.
- Open Access
- 21 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
FESTIM v2.0: Upgraded framework for multi-species hydrogen transport and enhanced performance
- 21 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
Open AccessFESTIM v2.0: Upgraded framework for multi-species hydrogen transport and enhanced performance
- 16 October 2025
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 41 (10) , e70101
Impact of Wall Property and Flow Rate Assumptions on Simulations of Flow‐Induced Vibration of Intracranial Aneurysms
Recent high‐fidelity fluid–structure interaction (FSI) simulations of cerebral aneurysms have revealed flow‐induced wall vibrations. However, those simulations were conducted under simplified conditions, and the robustness of the predicted vibrations remains unknown. This study aimed to advance the physiological accuracy of previous models and to investigate the sensitivity to parameter uncertainty. We compared the previously used near‐linear St. Venant–Kirchhoff wall model with a three‐term hyperelastic Mooney–Rivlin (MR3) model fitted to experimental data and also modeled effects of surrounding cerebrospinal fluid (CSF). We then varied flow rate (1.83 mL/s 25%), wall stiffness (soft, medium, stiff), and wall thickness (0.25 0.1 mm). Our main findings for the four aneurysms considered were as follows: the MR3 model led to an average increase of 35% in pulsation and 240% in vibration amplitude, along with an 18% decrease in frequency. Viscous damping by the CSF reduced the vibration amplitude by 68% but did not affect the frequency or pulsation. Changes in flow rate had no effect on pulsation but increased vibration amplitude by 246%. Wall stiffness and thickness had a comparatively smaller impact on vibration, altering amplitude by 36% and 82% and frequency by 20% and 8%. In conclusion, the more advanced models led to a decrease of vibration amplitude and frequency during the cardiac cycle, consistent with clinical observations. Like computational fluid dynamics, FSI simulations can be sensitive to flow rates but are otherwise robust and can provide a fundamental understanding of aneurysm wall vibration without precise knowledge of wall properties.
- 16 October 2025
- Published by Wiley in International Journal for Numerical Methods in Biomedical Engineering
- Vol. 41 (10) , e70101
Impact of Wall Property and Flow Rate Assumptions on Simulations of Flow‐Induced Vibration of Intracranial Aneurysms
Recent high‐fidelity fluid–structure interaction (FSI) simulations of cerebral aneurysms have revealed flow‐induced wall vibrations. However, those simulations were conducted under simplified conditions, and the robustness of the predicted vibrations remains unknown. This study aimed to advance the physiological accuracy of previous models and to investigate the sensitivity to parameter uncertainty. We compared the previously used near‐linear St. Venant–Kirchhoff wall model with a three‐term hyperelastic Mooney–Rivlin (MR3) model fitted to experimental data and also modeled effects of surrounding cerebrospinal fluid (CSF). We then varied flow rate (1.83 mL/s 25%), wall stiffness (soft, medium, stiff), and wall thickness (0.25 0.1 mm). Our main findings for the four aneurysms considered were as follows: the MR3 model led to an average increase of 35% in pulsation and 240% in vibration amplitude, along with an 18% decrease in frequency. Viscous damping by the CSF reduced the vibration amplitude by 68% but did not affect the frequency or pulsation. Changes in flow rate had no effect on pulsation but increased vibration amplitude by 246%. Wall stiffness and thickness had a comparatively smaller impact on vibration, altering amplitude by 36% and 82% and frequency by 20% and 8%. In conclusion, the more advanced models led to a decrease of vibration amplitude and frequency during the cardiac cycle, consistent with clinical observations. Like computational fluid dynamics, FSI simulations can be sensitive to flow rates but are otherwise robust and can provide a fundamental understanding of aneurysm wall vibration without precise knowledge of wall properties.
- Open Access
On the numerical evaluation of wall shear stress using the finite element method
Wall shear stress (WSS) is a crucial hemodynamic quantity extensively studied in cardiovascular research, yet its numerical computation is not straightforward. This work aims to compare WSS results obtained from two different finite element discretizations, quantify the differences between continuous and discontinuous stresses, and introduce a novel method for WSS evaluation through the formulation of a boundary-flux problem. Two benchmark problems are considered - a 2D Stokes flow on a unit square and a 3D Poiseuille flow through a cylindrical pipe. These are followed by investigations of steady-state Navier-Stokes flow in two patient-specific aneurysms. The study focuses on P1/P1 stabilized and Taylor-Hood P2/P1 mixed finite elements for velocity and pressure. WSS is computed using either the proposed boundary-flux method or as a projection of tangential traction onto First order Lagrange (P1), Discontinuous Galerkin first order (DG-1), or Discontinuous Galerkin zero order (DG-0) space. For the P1/P1 stabilized element, the boundary-flux and P1 projection methods yielded equivalent results. With the P2/P1 element, the boundary-flux evaluation demonstrated faster convergence in the Poiseuille flow example but showed increased sensitivity to pressure field inaccuracies in patient-specific geometries compared to the projection method. In patient-specific cases, the P2/P1 element exhibited superior robustness to mesh size when evaluating average WSS and low shear area (LSA), outperforming the P1/P1 stabilized element. Projecting discontinuous finite element results into continuous spaces can introduce artifacts, such as the Gibbs phenomenon. Consequently, it becomes crucial to carefully select the finite element space for boundary stress calculations - not only in applications involving WSS computations for aneurysms.
Open AccessOn the numerical evaluation of wall shear stress using the finite element method
Wall shear stress (WSS) is a crucial hemodynamic quantity extensively studied in cardiovascular research, yet its numerical computation is not straightforward. This work aims to compare WSS results obtained from two different finite element discretizations, quantify the differences between continuous and discontinuous stresses, and introduce a novel method for WSS evaluation through the formulation of a boundary-flux problem. Two benchmark problems are considered - a 2D Stokes flow on a unit square and a 3D Poiseuille flow through a cylindrical pipe. These are followed by investigations of steady-state Navier-Stokes flow in two patient-specific aneurysms. The study focuses on P1/P1 stabilized and Taylor-Hood P2/P1 mixed finite elements for velocity and pressure. WSS is computed using either the proposed boundary-flux method or as a projection of tangential traction onto First order Lagrange (P1), Discontinuous Galerkin first order (DG-1), or Discontinuous Galerkin zero order (DG-0) space. For the P1/P1 stabilized element, the boundary-flux and P1 projection methods yielded equivalent results. With the P2/P1 element, the boundary-flux evaluation demonstrated faster convergence in the Poiseuille flow example but showed increased sensitivity to pressure field inaccuracies in patient-specific geometries compared to the projection method. In patient-specific cases, the P2/P1 element exhibited superior robustness to mesh size when evaluating average WSS and low shear area (LSA), outperforming the P1/P1 stabilized element. Projecting discontinuous finite element results into continuous spaces can introduce artifacts, such as the Gibbs phenomenon. Consequently, it becomes crucial to carefully select the finite element space for boundary stress calculations - not only in applications involving WSS computations for aneurysms.
- Open Access
Spatial modeling algorithms for reactions and transport (SMART) in biological cells
Biological cells rely on precise spatiotemporal coordination of biochemical reactions to control their many functions. Such cell signaling networks have been a common focus for mathematical models, but they remain challenging to simulate, particularly in realistic cell geometries. Herein, we present our software, Spatial Modeling Algorithms for Reaction and Transport (SMART), a package that takes in high-level user specifications about cell signaling networks and molecular transport, and then assembles and solves the associated mathematical and computational systems. SMART uses state-of-the-art finite element analysis, via the FEniCS Project software, to efficiently and accurately resolve cell signaling events over discretized cellular and subcellular geometries. We demonstrate its application to several different biological systems, including YAP/TAZ mechanotransduction, calcium signaling in neurons and cardiomyocytes, and ATP generation in mitochondria. Throughout, we utilize experimentally-derived realistic cellular geometries represented by well-conditioned tetrahedral meshes. These scenarios demonstrate the applicability, flexibility, accuracy and efficiency of SMART across a range of temporal and spatial scales.
Open AccessSpatial modeling algorithms for reactions and transport (SMART) in biological cells
Biological cells rely on precise spatiotemporal coordination of biochemical reactions to control their many functions. Such cell signaling networks have been a common focus for mathematical models, but they remain challenging to simulate, particularly in realistic cell geometries. Herein, we present our software, Spatial Modeling Algorithms for Reaction and Transport (SMART), a package that takes in high-level user specifications about cell signaling networks and molecular transport, and then assembles and solves the associated mathematical and computational systems. SMART uses state-of-the-art finite element analysis, via the FEniCS Project software, to efficiently and accurately resolve cell signaling events over discretized cellular and subcellular geometries. We demonstrate its application to several different biological systems, including YAP/TAZ mechanotransduction, calcium signaling in neurons and cardiomyocytes, and ATP generation in mitochondria. Throughout, we utilize experimentally-derived realistic cellular geometries represented by well-conditioned tetrahedral meshes. These scenarios demonstrate the applicability, flexibility, accuracy and efficiency of SMART across a range of temporal and spatial scales.
- Open Access
- 30 April 2024
- Published by The Open Journal in Journal of Open Source Software
- Vol. 9 (96) , 6451
ADIOS4DOLFINx: A framework for checkpointing in FEniCS
We introduce ADIOS4DOLFINx, a checkpointing framework for the latest version of the FEniCS project, known as DOLFINx. DOLFINx is a general framework for solving partial differential equations using the finite element method. The input to simulations using the finite element method is the computational domain (mesh), mesh markers, initial conditions, and boundary conditions. To be able to restart a simulation at any point, one has to have the capability to read in all of the aforementioned variables. The adios4dolfinx package implements all of these operations, using the Message Passing Interface (MPI) for communication across multiple processes and ADIOS2 for writing/reading data to/from file. In particular, the functionality of adios4dolfinx includes N-to-M-checkpointing, which means that one can store a result of a simulation that was generated with N number of processes, and read it into a program running on M processes.
- 30 April 2024
- Published by The Open Journal in Journal of Open Source Software
- Vol. 9 (96) , 6451
Open AccessADIOS4DOLFINx: A framework for checkpointing in FEniCS
We introduce ADIOS4DOLFINx, a checkpointing framework for the latest version of the FEniCS project, known as DOLFINx. DOLFINx is a general framework for solving partial differential equations using the finite element method. The input to simulations using the finite element method is the computational domain (mesh), mesh markers, initial conditions, and boundary conditions. To be able to restart a simulation at any point, one has to have the capability to read in all of the aforementioned variables. The adios4dolfinx package implements all of these operations, using the Message Passing Interface (MPI) for communication across multiple processes and ADIOS2 for writing/reading data to/from file. In particular, the functionality of adios4dolfinx includes N-to-M-checkpointing, which means that one can store a result of a simulation that was generated with N number of processes, and read it into a program running on M processes.
- Open Access
- 19 October 2023
- Published by The Open Journal in Journal of Open Source Software
- Vol. 8 (90) , 5580
SMART: Spatial Modeling Algorithms for Reactions and Transport
Recent advances in microscopy and 3D reconstruction methods have allowed for characterization of cellular morphology in unprecedented detail, including the irregular geometries of intracellular subcompartments such as membrane-bound organelles. These geometries are now compatible with predictive modeling of cellular function. Biological cells respond to stimuli through sequences of chemical reactions generally referred to as cell signaling pathways. The propagation and reaction of chemical substances in cell signaling pathways can be represented by coupled nonlinear systems of reaction-transport equations. These reaction pathways include numerous chemical species that react across boundaries or interfaces (e.g., the cell membrane and membranes of organelles within the cell) and domains (e.g., the bulk cell volume and the interior of organelles). Such systems of multi-dimensional partial differential equations (PDEs) are notoriously difficult to solve because of their high dimensionality, non-linearities, strong coupling, stiffness, and potential instabilities. In this work, we describe Spatial Modeling Algorithms for Reactions and Transport (SMART), a finite-element-based simulation package for model specification and numerical simulation of spatially-varying reaction-transport processes. SMART is based on the FEniCS finite element library, provides a symbolic representation framework for specifying reaction pathways, and supports geometries in 2D and 3D including large and irregular cell geometries obtained from modern ultrastructural characterization methods.
- 19 October 2023
- Published by The Open Journal in Journal of Open Source Software
- Vol. 8 (90) , 5580
Open AccessSMART: Spatial Modeling Algorithms for Reactions and Transport
Recent advances in microscopy and 3D reconstruction methods have allowed for characterization of cellular morphology in unprecedented detail, including the irregular geometries of intracellular subcompartments such as membrane-bound organelles. These geometries are now compatible with predictive modeling of cellular function. Biological cells respond to stimuli through sequences of chemical reactions generally referred to as cell signaling pathways. The propagation and reaction of chemical substances in cell signaling pathways can be represented by coupled nonlinear systems of reaction-transport equations. These reaction pathways include numerous chemical species that react across boundaries or interfaces (e.g., the cell membrane and membranes of organelles within the cell) and domains (e.g., the bulk cell volume and the interior of organelles). Such systems of multi-dimensional partial differential equations (PDEs) are notoriously difficult to solve because of their high dimensionality, non-linearities, strong coupling, stiffness, and potential instabilities. In this work, we describe Spatial Modeling Algorithms for Reactions and Transport (SMART), a finite-element-based simulation package for model specification and numerical simulation of spatially-varying reaction-transport processes. SMART is based on the FEniCS finite element library, provides a symbolic representation framework for specifying reaction pathways, and supports geometries in 2D and 3D including large and irregular cell geometries obtained from modern ultrastructural characterization methods.
- Top Cited PapersOpen Access
- 26 May 2022
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Mathematical Software
- Vol. 48 (2) , 1-23
Construction of Arbitrary Order Finite Element Degree-of-Freedom Maps on Polygonal and Polyhedral Cell Meshes
We develop a method for generating degree-of-freedom maps for arbitrary order Ciarlet-type finite element spaces for any cell shape. The approach is based on the composition of permutations and transformations by cell sub-entity. Current approaches to generating degree-of-freedom maps for arbitrary order problems typically rely on a consistent orientation of cell entities that permits the definition of a common local coordinate system on shared edges and faces. However, while orientation of a mesh is straightforward for simplex cells and is a local operation, it is not a strictly local operation for quadrilateral cells and, in the case of hexahedral cells, not all meshes are orientable. The permutation and transformation approach is developed for a range of element types, including arbitrary degree Lagrange, serendipity, and divergence- and curl-conforming elements, and for a range of cell shapes. The approach is local and can be applied to cells of any shape, including general polytopes and meshes with mixed cell types. A number of examples are presented and the developed approach has been implemented in open-source libraries.
- 26 May 2022
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Mathematical Software
- Vol. 48 (2) , 1-23
Top Cited PapersOpen AccessConstruction of Arbitrary Order Finite Element Degree-of-Freedom Maps on Polygonal and Polyhedral Cell Meshes
We develop a method for generating degree-of-freedom maps for arbitrary order Ciarlet-type finite element spaces for any cell shape. The approach is based on the composition of permutations and transformations by cell sub-entity. Current approaches to generating degree-of-freedom maps for arbitrary order problems typically rely on a consistent orientation of cell entities that permits the definition of a common local coordinate system on shared edges and faces. However, while orientation of a mesh is straightforward for simplex cells and is a local operation, it is not a strictly local operation for quadrilateral cells and, in the case of hexahedral cells, not all meshes are orientable. The permutation and transformation approach is developed for a range of element types, including arbitrary degree Lagrange, serendipity, and divergence- and curl-conforming elements, and for a range of cell shapes. The approach is local and can be applied to cells of any shape, including general polytopes and meshes with mixed cell types. A number of examples are presented and the developed approach has been implemented in open-source libraries.