Sampathkumar Ramakumar
Research Subjects
Sampathkumar Ramakumar has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
C. Deviannapoorani
8 shared publicationsL. Dhivya
6 shared publications- Ramaswamy Murugan
High Energy Density Batteries Research Laboratory, Department of Physics, Pondicherry University, Puducherry 605014, India
6 shared publications N. Janani
5 shared publicationsRamaswamy Murugan
5 shared publications- Ramaswamy Murugan
Pondicherry University
3 shared publications
Latest Publications
- Open Access
- 21 December 2023
- Published by Elsevier in Materialia
- Vol. 33
High-pressure low-temperature densification of NASICON-based LATP electrolytes for solid-state lithium batteries
- 21 December 2023
- Published by Elsevier in Materialia
- Vol. 33
Open AccessHigh-pressure low-temperature densification of NASICON-based LATP electrolytes for solid-state lithium batteries
- Open Access
Interface Stability between Na3Zr2Si2PO12 Solid Electrolyte and Sodium Metal Anode for Quasi-Solid-State Sodium Battery
Solid electrolytes are renowned for their nonflammable, dendrite-blocking qualities, which also exhibit stability over large potential windows. NASICON-type Na1+xZr2SixP3-xO12 (NZSP) is a well-known solid electrolyte material for sodium metal batteries owing to its elevated room temperature sodium-ion (Na+) conductivity and good electrochemical stability. Nevertheless, the strong electrode–electrolyte interfacial resistance restricts its implementation in sodium metal batteries and remains a significant challenge. In this work, we present an efficacious process to enhance the sodium wettability of Na3Zr2Si2PO12 by sputtering a thin gold (Au) interlayer. Our experimental investigation indicates a substantial reduction in interfacial resistance, from 2708 Ω cm2 to 146 Ω cm2, by employing a fine Au interlayer between the Na metal and the NZSP electrolyte. The symmetrical Na||NZSP||Na with a gold interlayer cell shows a steady Na stripping/plating at a high current density of 320 µA cm−2. A quasi-solid-state battery, with NaFePO4 (NFP) as a cathode, metallic sodium as an anode, and a Au-sputtered NZSP electrolyte with polypropylene (PP) soaked in electrolyte as an intermediate layer on the cathode, exhibited a discharge capacity of 100 mAh g−1 and a ~100% Coulombic efficiency at 50 μA cm−2 after the 50th charge/discharge cycle at room temperature (RT).
Open AccessInterface Stability between Na3Zr2Si2PO12 Solid Electrolyte and Sodium Metal Anode for Quasi-Solid-State Sodium Battery
Solid electrolytes are renowned for their nonflammable, dendrite-blocking qualities, which also exhibit stability over large potential windows. NASICON-type Na1+xZr2SixP3-xO12 (NZSP) is a well-known solid electrolyte material for sodium metal batteries owing to its elevated room temperature sodium-ion (Na+) conductivity and good electrochemical stability. Nevertheless, the strong electrode–electrolyte interfacial resistance restricts its implementation in sodium metal batteries and remains a significant challenge. In this work, we present an efficacious process to enhance the sodium wettability of Na3Zr2Si2PO12 by sputtering a thin gold (Au) interlayer. Our experimental investigation indicates a substantial reduction in interfacial resistance, from 2708 Ω cm2 to 146 Ω cm2, by employing a fine Au interlayer between the Na metal and the NZSP electrolyte. The symmetrical Na||NZSP||Na with a gold interlayer cell shows a steady Na stripping/plating at a high current density of 320 µA cm−2. A quasi-solid-state battery, with NaFePO4 (NFP) as a cathode, metallic sodium as an anode, and a Au-sputtered NZSP electrolyte with polypropylene (PP) soaked in electrolyte as an intermediate layer on the cathode, exhibited a discharge capacity of 100 mAh g−1 and a ~100% Coulombic efficiency at 50 μA cm−2 after the 50th charge/discharge cycle at room temperature (RT).
- 7 September 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (11)
In‐situ Lithiated SiO2 as Lithium‐Free Anode for Lithium‐Sulfur Batteries
Lithium‐sulfur (Li−S) batteries are attractive owing to their high energy density and cost‐effectiveness. However, the practical application of Li−S batteries is hindered by uncontrollable lithium dendrite growth and severe polysulfide shuttling during cycling. Here, we fabricated 100 nm thin SiO2 decorated on carbon cloth (SiO2@CC). It is observed that in‐situ lithiation of SiO2 forms a highly lithiophilic LixSiOy layer over SiO2 which further acts as an efficient host for dendrite‐free lithium metal deposition. So lithiated SiO2@CC shows high affinity for homogenous growth of Li while the carbon fibers control the volume change during the deposition/stripping process. Hence, the synergistic effect of LixSiOy layer and carbon cloth (CC) effectively suppresses dendritic Li growth. As a result, the symmetric cell exhibits an ultra‐stable cycling performance over 1000 h with a low overpotential of −2. Further, the lithiated SiO2@CC is used as a lithium metal‐free anode (also a flexible electrode) for Li−S battery, which exhibits a stable capacity of 800 mAh g−1 over 500 cycles due to its unique structural properties. This work offers new insights and paves the way for developing dendrite‐free, high‐performance Li−S battery technology.
- 7 September 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (11)
In‐situ Lithiated SiO2 as Lithium‐Free Anode for Lithium‐Sulfur Batteries
Lithium‐sulfur (Li−S) batteries are attractive owing to their high energy density and cost‐effectiveness. However, the practical application of Li−S batteries is hindered by uncontrollable lithium dendrite growth and severe polysulfide shuttling during cycling. Here, we fabricated 100 nm thin SiO2 decorated on carbon cloth (SiO2@CC). It is observed that in‐situ lithiation of SiO2 forms a highly lithiophilic LixSiOy layer over SiO2 which further acts as an efficient host for dendrite‐free lithium metal deposition. So lithiated SiO2@CC shows high affinity for homogenous growth of Li while the carbon fibers control the volume change during the deposition/stripping process. Hence, the synergistic effect of LixSiOy layer and carbon cloth (CC) effectively suppresses dendritic Li growth. As a result, the symmetric cell exhibits an ultra‐stable cycling performance over 1000 h with a low overpotential of −2. Further, the lithiated SiO2@CC is used as a lithium metal‐free anode (also a flexible electrode) for Li−S battery, which exhibits a stable capacity of 800 mAh g−1 over 500 cycles due to its unique structural properties. This work offers new insights and paves the way for developing dendrite‐free, high‐performance Li−S battery technology.
- Open Access
- 1 March 2021
- Published by Bentham Science Publishers Ltd. in Current Smart Materials
- Vol. 5 (1) , 3-37
Advances in Electrolytes for High Capacity Rechargeable Lithium-Sulphur Batteries
Reliable energy storage is a censorious need for an extensive range of requisite such as portable electronic devices, transportation, medical devices, spacecraft and elsewhere. Among the known storage devices, the lithium ion (Li+) batteries have enticed attention because of higher theoretical energy density. Nevertheless, the state-of-the-art electrolyte in lithium batteries utilizing a Li+ salt dissolved in organic-type solvents poses severe safety concerns like flammability arising from dendrite formation. Next generation (beyond Li+) battery systems such as lithium sulphur (Li-S) batteries have gained interest in recent times. This battery system has been extensively revisited in an attempt to develop high energy batteries and is now considered as the technology of choice for hybrid vehicle electrification and grid storage. Higher theoretical capacity and higher theoretical energy density, environmental friendliness and low cost of active material make the Li-S batteries an ideal candidate to meet increasing energy requirements. This review looks at various advanced electrolytic systems with much emphasis on solid state electrolytic systems for Li-S batteries because of their striking properties. The technical issues of the sulphur cathode are also summarized and the strategies followed in recent years are highlighted in this review to address these issues. It is anticipated that Li-S batteries with efficient solid electrolytic system may replace the conventional insertion-type low energy density Li+ batteries in the near future.
- 1 March 2021
- Published by Bentham Science Publishers Ltd. in Current Smart Materials
- Vol. 5 (1) , 3-37
Open AccessAdvances in Electrolytes for High Capacity Rechargeable Lithium-Sulphur Batteries
Reliable energy storage is a censorious need for an extensive range of requisite such as portable electronic devices, transportation, medical devices, spacecraft and elsewhere. Among the known storage devices, the lithium ion (Li+) batteries have enticed attention because of higher theoretical energy density. Nevertheless, the state-of-the-art electrolyte in lithium batteries utilizing a Li+ salt dissolved in organic-type solvents poses severe safety concerns like flammability arising from dendrite formation. Next generation (beyond Li+) battery systems such as lithium sulphur (Li-S) batteries have gained interest in recent times. This battery system has been extensively revisited in an attempt to develop high energy batteries and is now considered as the technology of choice for hybrid vehicle electrification and grid storage. Higher theoretical capacity and higher theoretical energy density, environmental friendliness and low cost of active material make the Li-S batteries an ideal candidate to meet increasing energy requirements. This review looks at various advanced electrolytic systems with much emphasis on solid state electrolytic systems for Li-S batteries because of their striking properties. The technical issues of the sulphur cathode are also summarized and the strategies followed in recent years are highlighted in this review to address these issues. It is anticipated that Li-S batteries with efficient solid electrolytic system may replace the conventional insertion-type low energy density Li+ batteries in the near future.
- 10 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (6) , 4118-4125
LAGP|Li Interface Modification through a Wetted Polypropylene Interlayer for Solid State Li-Ion and Li–S batteries
- 10 May 2019
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 2 (6) , 4118-4125
LAGP|Li Interface Modification through a Wetted Polypropylene Interlayer for Solid State Li-Ion and Li–S batteries
- 1 July 2017
- Published by Elsevier in Progress in Materials Science
- Vol. 88, 325-411
Lithium garnets: Synthesis, structure, Li + conductivity, Li + dynamics and applications
- 1 July 2017
- Published by Elsevier in Progress in Materials Science
- Vol. 88, 325-411
Lithium garnets: Synthesis, structure, Li + conductivity, Li + dynamics and applications
- 27 September 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (97) , 94706-94716
Phase transition, lithium ion conductivity and structural stability of tin substituted lithium garnets
The high Li+ conductive cubic phase (Ia3d) Li6.5La3Sn1.5Ta0.5O12 immersed with the solution of benzoic acid and ethanol, distilled water and exposed to humid condition for 2 weeks preserved its high conductive cubic structure (Ia3d).
- 27 September 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (97) , 94706-94716
Phase transition, lithium ion conductivity and structural stability of tin substituted lithium garnets
The high Li+ conductive cubic phase (Ia3d) Li6.5La3Sn1.5Ta0.5O12 immersed with the solution of benzoic acid and ethanol, distilled water and exposed to humid condition for 2 weeks preserved its high conductive cubic structure (Ia3d).
- 27 February 2016
- Published by Springer Nature in Ionics
- Vol. 22 (8) , 1281-1289
Investigation on lithium ion conductivity and structural stability of yttrium-substituted Li7La3Zr2O12
- 27 February 2016
- Published by Springer Nature in Ionics
- Vol. 22 (8) , 1281-1289
Investigation on lithium ion conductivity and structural stability of yttrium-substituted Li7La3Zr2O12
- 1 December 2015
- Published by Elsevier in Solid State Ionics
- Vol. 283, 123-130
Synthesis of lithium garnets from La2Zr2O7 pyrochlore
- 1 December 2015
- Published by Elsevier in Solid State Ionics
- Vol. 283, 123-130
Synthesis of lithium garnets from La2Zr2O7 pyrochlore