Anne-Laure Calendron
Anne-Laure Calendron has a total of 240 co-authors. Here are the top co-authors by number of shared publications:
- Huseyin Cankaya
University of Hamburg
46 shared publications Franz X. Kärtner
Center for Free-Electron Laser Science CFEL, Deutsches Elektronen-Synchrotron DESY 1 , Notkestr. 85, 22607 Hamburg, Germany
32 shared publications- Michael Hemmer
JILA and STROBE NSF Science and Technology Center, University of Colorado, Boulder, CO 80309, USA
15 shared publications Xiaojun Wu
Deutsches Elektronen-Synchrotron (Germany)
14 shared publicationsKoustuban Ravi
Deutsches Elektronen-Synchrotron (Germany)
13 shared publicationsNicholas H. Matlis
Deutsches Elektronen-Synchrotron (Germany)
13 shared publications
Latest Publications
- 20 October 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (11) , 3846
Advanced Solid-State Lasers 2025: feature issue introduction
This joint feature issue of Optics Express and Optical Materials Express presents 38 peer-reviewed articles associated with the Advanced Solid-State Lasers 2025 conference, held as part of the Optica Laser Congress in Prague, Czechia, from 19 to 23 October 2025. The collection reflects continuing progress in solid-state laser materials, laser architectures, ultrafast and high-power sources, nonlinear optics, and frequency conversion. The contributions span rare-earth and transition-metal-doped crystals, ceramics, glasses, and fibers; nonlinear materials; laser operation from continuous-wave to pulsed and ultrafast regimes; and spectral coverage from the visible to the mid-infrared. Together, the articles demonstrate advances in nonlinear and gain-media engineering, thermal management, pulse control, frequency conversion, and source scalability, while addressing applications in spectroscopy, sensing, communications, remote sensing, and medicine.
- 20 October 2026
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 16 (11) , 3846
Advanced Solid-State Lasers 2025: feature issue introduction
This joint feature issue of Optics Express and Optical Materials Express presents 38 peer-reviewed articles associated with the Advanced Solid-State Lasers 2025 conference, held as part of the Optica Laser Congress in Prague, Czechia, from 19 to 23 October 2025. The collection reflects continuing progress in solid-state laser materials, laser architectures, ultrafast and high-power sources, nonlinear optics, and frequency conversion. The contributions span rare-earth and transition-metal-doped crystals, ceramics, glasses, and fibers; nonlinear materials; laser operation from continuous-wave to pulsed and ultrafast regimes; and spectral coverage from the visible to the mid-infrared. Together, the articles demonstrate advances in nonlinear and gain-media engineering, thermal management, pulse control, frequency conversion, and source scalability, while addressing applications in spectroscopy, sensing, communications, remote sensing, and medicine.
- 20 October 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (22) , 41316
Advanced Solid-State Lasers 2025: feature issue introduction
This joint feature issue of Optics Express and Optical Materials Express presents 38 peer-reviewed articles associated with the Advanced Solid-State Lasers 2025 conference, held as part of the Optica Laser Congress in Prague, Czechia, from 19 to 23 October 2025. The collection reflects continuing progress in solid-state laser materials, laser architectures, ultrafast and high-power sources, nonlinear optics, and frequency conversion. The contributions span rare-earth and transition-metal-doped crystals, ceramics, glasses, and fibers; nonlinear materials; laser operation from continuous-wave to pulsed and ultrafast regimes; and spectral coverage from the visible to the mid-infrared. Together, the articles demonstrate advances in nonlinear and gain-media engineering, thermal management, pulse control, frequency conversion, and source scalability, while addressing applications in spectroscopy, sensing, communications, remote sensing, and medicine.
- 20 October 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (22) , 41316
Advanced Solid-State Lasers 2025: feature issue introduction
This joint feature issue of Optics Express and Optical Materials Express presents 38 peer-reviewed articles associated with the Advanced Solid-State Lasers 2025 conference, held as part of the Optica Laser Congress in Prague, Czechia, from 19 to 23 October 2025. The collection reflects continuing progress in solid-state laser materials, laser architectures, ultrafast and high-power sources, nonlinear optics, and frequency conversion. The contributions span rare-earth and transition-metal-doped crystals, ceramics, glasses, and fibers; nonlinear materials; laser operation from continuous-wave to pulsed and ultrafast regimes; and spectral coverage from the visible to the mid-infrared. Together, the articles demonstrate advances in nonlinear and gain-media engineering, thermal management, pulse control, frequency conversion, and source scalability, while addressing applications in spectroscopy, sensing, communications, remote sensing, and medicine.
- Open Access
- 17 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (3) , 033903
Spin-structured multilayer THz emitters by oblique incidence deposition
State-of-the-art THz spintronic emitters require a constant magnetic field to saturate their magnetization. We demonstrate that depositing the ferromagnetic layers at oblique incidence confines the magnetization to a chosen in-plane easy axis and maintains the saturation in the absence of an external magnetic field. We use this method to build THz emitters structured as spin valves, for which we use an external magnetic field to turn on and off the emission of THz radiation as well as to change its polarization. We are able to reproduce the THz waveforms by modeling the spin current and the THz propagation through the multilayer system.
- 17 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (3) , 033903
Open AccessSpin-structured multilayer THz emitters by oblique incidence deposition
State-of-the-art THz spintronic emitters require a constant magnetic field to saturate their magnetization. We demonstrate that depositing the ferromagnetic layers at oblique incidence confines the magnetization to a chosen in-plane easy axis and maintains the saturation in the absence of an external magnetic field. We use this method to build THz emitters structured as spin valves, for which we use an external magnetic field to turn on and off the emission of THz radiation as well as to change its polarization. We are able to reproduce the THz waveforms by modeling the spin current and the THz propagation through the multilayer system.
- 8 December 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (24) , 6385-6388
One-joule 500-Hz cryogenic Yb:YAG laser driver of composite thin-disk design
We present results on the development of a cryogenic Yb:YAG multi-pass laser amplifier based on a composite thin-disk design and demonstrate one-joule, diffraction limited, chirped 234-ps pulses with 50% optical-to-optical efficiency. High beam quality was obtained for repetition rates up to 400 Hz. The hardware was disassembled and thoroughly inspected after accumulating 80 hours of use at repetition rates from 100 to 500 Hz and exhibited no signs of damage. This laser driver is now commissioned to a dedicated laboratory where a grating compressor is producing 5.2-ps pulses used in the development of a compact x ray source based on inverse Compton scattering.
- 8 December 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (24) , 6385-6388
One-joule 500-Hz cryogenic Yb:YAG laser driver of composite thin-disk design
We present results on the development of a cryogenic Yb:YAG multi-pass laser amplifier based on a composite thin-disk design and demonstrate one-joule, diffraction limited, chirped 234-ps pulses with 50% optical-to-optical efficiency. High beam quality was obtained for repetition rates up to 400 Hz. The hardware was disassembled and thoroughly inspected after accumulating 80 hours of use at repetition rates from 100 to 500 Hz and exhibited no signs of damage. This laser driver is now commissioned to a dedicated laboratory where a grating compressor is producing 5.2-ps pulses used in the development of a compact x ray source based on inverse Compton scattering.
- 1 January 2022
- Published by Optica Publishing Group
- p. ATu5M.2
Optical synchronization of a 2 μm Ho:fiber oscillator and phase-noise analysis
A 2 μm Holmium oscillator, frequency-converted to 1025 nm, and a 1030 nm oscillator locked to an RF reference are synchronized optically. The timing jitter measured on the 2 μm oscillator is reduced to 19 fs.
- 1 January 2022
- Published by Optica Publishing Group
- p. ATu5M.2
Optical synchronization of a 2 μm Ho:fiber oscillator and phase-noise analysis
A 2 μm Holmium oscillator, frequency-converted to 1025 nm, and a 1030 nm oscillator locked to an RF reference are synchronized optically. The timing jitter measured on the 2 μm oscillator is reduced to 19 fs.
- 4 February 2021
- Published by Optica Publishing Group in Optics Letters
- Vol. 46 (4) , 741-744
µJ-level multi-cycle terahertz generation in a periodically poled Rb:KTP crystal
We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900 m J / c m 2 , showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.
- 4 February 2021
- Published by Optica Publishing Group in Optics Letters
- Vol. 46 (4) , 741-744
µJ-level multi-cycle terahertz generation in a periodically poled Rb:KTP crystal
We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900 m J / c m 2 , showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.
- 25 January 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (4) , 912-917
Bulk, cascaded pulse compression scheme and its application to spin emitter characterization
The 35-fs-long pulses of a commercial Ti:sapphire amplifier are compressed to ∼ 20 f s via self-phase modulation in bulk glass substrates. The cascading of both nonlinear broadening and dispersion compensation stages makes use of the increasing peak power in the successive nonlinear stages. As an application example, the compressed pulses are used for electro-optical sampling of terahertz waves created by optically pumped thin-film spin emitters.
- 25 January 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (4) , 912-917
Bulk, cascaded pulse compression scheme and its application to spin emitter characterization
The 35-fs-long pulses of a commercial Ti:sapphire amplifier are compressed to ∼ 20 f s via self-phase modulation in bulk glass substrates. The cascading of both nonlinear broadening and dispersion compensation stages makes use of the increasing peak power in the successive nonlinear stages. As an application example, the compressed pulses are used for electro-optical sampling of terahertz waves created by optically pumped thin-film spin emitters.
- 2 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11270, 1127002
Compact terahertz driven electron and X-ray sources
The generation and use of THz radiation for electron acceleration and manipulation of electron bunches has progressed over the last decade to a level where practical devices for THz guns, acceleration and a wide range of beam manipulations have become possible. Here, we present our progress on generation of single-cycle THz pulses at the two-hundred micro- Joule level to drive advanced acceleration and beam manipulation devices. Specifically, we use pulses centered at 0.3 THz to power a segmented terahertz electron accelerator and manipulator (STEAM) capable of performing multiple high-field operations on the 6D-phase-space of ultrashort electron bunches. Using this STEAM device, we demonstrate record THzacceleration of >60 keV, streaking with 2 kT/m strength, compression to ~100 fs as well as real-time switching between these modes of operation. The STEAM device demonstrates the feasibility of THz-based electron accelerators, manipulators and diagnostic tools enabling science beyond current resolution frontiers with transformative impact.
- 2 March 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11270, 1127002
Compact terahertz driven electron and X-ray sources
The generation and use of THz radiation for electron acceleration and manipulation of electron bunches has progressed over the last decade to a level where practical devices for THz guns, acceleration and a wide range of beam manipulations have become possible. Here, we present our progress on generation of single-cycle THz pulses at the two-hundred micro- Joule level to drive advanced acceleration and beam manipulation devices. Specifically, we use pulses centered at 0.3 THz to power a segmented terahertz electron accelerator and manipulator (STEAM) capable of performing multiple high-field operations on the 6D-phase-space of ultrashort electron bunches. Using this STEAM device, we demonstrate record THzacceleration of >60 keV, streaking with 2 kT/m strength, compression to ~100 fs as well as real-time switching between these modes of operation. The STEAM device demonstrates the feasibility of THz-based electron accelerators, manipulators and diagnostic tools enabling science beyond current resolution frontiers with transformative impact.
- 22 January 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (3) , 3171-3178
Novel method for the angular chirp compensation of passively CEP-stable few-cycle pulses
We demonstrate a novel, energy-efficient, cost-effective simple method for seeding CEP-stable OPCPAs. We couple the CEP-stable idler of a broadband OPCPA into a hollow core Kagome fiber thus compensating for the angular chirp. We obtain either relatively narrow bandwidths with ∼36% coupling efficiency or quarter-octave spanning bandwidths with ∼2.2% coupling efficiency. We demonstrate spectral compressibility, good beam quality and CEP stability. Our source is an ideal seed for high-energy, high-average power, CEP-stable few-cycle OPCPA pulses around 2 µm, which can drive the generation of coherent soft X-ray radiation in the water window spectral region via HHG.
- 22 January 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (3) , 3171-3178
Novel method for the angular chirp compensation of passively CEP-stable few-cycle pulses
We demonstrate a novel, energy-efficient, cost-effective simple method for seeding CEP-stable OPCPAs. We couple the CEP-stable idler of a broadband OPCPA into a hollow core Kagome fiber thus compensating for the angular chirp. We obtain either relatively narrow bandwidths with ∼36% coupling efficiency or quarter-octave spanning bandwidths with ∼2.2% coupling efficiency. We demonstrate spectral compressibility, good beam quality and CEP stability. Our source is an ideal seed for high-energy, high-average power, CEP-stable few-cycle OPCPA pulses around 2 µm, which can drive the generation of coherent soft X-ray radiation in the water window spectral region via HHG.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Energy spread and emittance control in segmented high field Terahertz driven electron accelerators
Here we use a two-stage segmented-terahertz-electron-accelerator-and-manipulator (STEAM) setup to demonstrate control over the electron beam energy, energy spread and emittance. The first rebunching stage is used to tune the duration of 55 keV electron bunches that enables femtosecond phase control at the second accelerating stage. For optimized parameters, energy spread and emittance are reduced by 4x and 6x, respectively, relative to operation with the first stage off. A record energy gain of $\sim 70$ keV was achieved at a peak accelerating field of 200 MV/m, resulting in >100% energy boost in a THz-powered accelerator for the first time.- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Energy spread and emittance control in segmented high field Terahertz driven electron accelerators
Here we use a two-stage segmented-terahertz-electron-accelerator-and-manipulator (STEAM) setup to demonstrate control over the electron beam energy, energy spread and emittance. The first rebunching stage is used to tune the duration of 55 keV electron bunches that enables femtosecond phase control at the second accelerating stage. For optimized parameters, energy spread and emittance are reduced by 4x and 6x, respectively, relative to operation with the first stage off. A record energy gain of $\sim 70$ keV was achieved at a peak accelerating field of 200 MV/m, resulting in >100% energy boost in a THz-powered accelerator for the first time.