Jianxing Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jianxing Liu has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Mykola Sysyn
Institute of Railway Systems and Public Transport, Technical University Dresden, 01069 Dresden, Germany
8 shared publications - Szabolcs Fischer
Central Campus Győr, Széchenyi István University, H-9026 Győr, Hungary
6 shared publications Ganzhong Liu
MOE Key Laboratory of High-speed Railway Engineering, Southwest Jiaotong University, Chengdu, China
3 shared publicationsJieling Xiao
MOE Key Laboratory of High-speed Railway Engineering, Southwest Jiaotong University, Chengdu, China
3 shared publications- Balázs Eller
Central Campus Győr, Széchenyi István University, H-9026 Győr, Hungary
2 shared publications - Dániel Harrach
Central Campus Győr, Széchenyi István University, H-9026 Győr, Hungary
2 shared publications
Latest Publications
- 13 August 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 238 (10) , 1185-1198
Advances in research on the ballast bed stability on railway bridges
The rapid development of high-speed railway bridges in China has brought enormous challenges to the ballast bed stability on the bridge. With the increase in the bridge span, the bridge deformation under the temperature load increases gradually, as well as the stability difference of ballast bed between different regions. Moreover, the track vibration response under high-speed driving conditions is larger, which can easily cause differential settlement, flying ballast, and deterioration of the ballast bed, thereby affecting the bearing capacity and stability of the ballast bed. In view of this, this article summarizes relevant research work on a ballast bed on the bridge from the perspectives of the resistance, deformation, and acceleration response of the ballast bed. In addition, this study discusses the existing measures for improving the ballast bed stability on the bridge, including the optimization of the sleeper and ballast bed structures. Finally, the main issues that need to be addressed to improve the ballast bed stability on the bridge are pointed out, and ideas for future research on ballast beds on bridges with different spans and structures are proposed.
- 13 August 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 238 (10) , 1185-1198
Advances in research on the ballast bed stability on railway bridges
The rapid development of high-speed railway bridges in China has brought enormous challenges to the ballast bed stability on the bridge. With the increase in the bridge span, the bridge deformation under the temperature load increases gradually, as well as the stability difference of ballast bed between different regions. Moreover, the track vibration response under high-speed driving conditions is larger, which can easily cause differential settlement, flying ballast, and deterioration of the ballast bed, thereby affecting the bearing capacity and stability of the ballast bed. In view of this, this article summarizes relevant research work on a ballast bed on the bridge from the perspectives of the resistance, deformation, and acceleration response of the ballast bed. In addition, this study discusses the existing measures for improving the ballast bed stability on the bridge, including the optimization of the sleeper and ballast bed structures. Finally, the main issues that need to be addressed to improve the ballast bed stability on the bridge are pointed out, and ideas for future research on ballast beds on bridges with different spans and structures are proposed.
- 29 February 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 50-57
Advantages of using CONCRETE CANVAS materials in railway track construction
Purpose. Justification of the feasibility of using new types of drainage materials, such as Concrete Canvas (CC), under the upper structure of the railway permanent way. Methodology. The tasks were solved by a complex research method, including analysis and generalization of literary and patent sources, analytical, experimental studies, using computer and mathematical modeling methods. Tests were conducted with and without the CC layer in a multi-level shear box. After the shear test, the specimens were also tested for load-bearing capacity (E2, according to the Hungarian standard) and particle breakage. The contact surface between the bottom of the ballast and the CC was measured using a precision 3D laser scanner (GOM ATOS) and visualized graphically using AutoCAD software. Findings. Experimental testing of the vertical load during connection and analysis compared with the test results of geocomposite/geogrid structures, internal shear resistance, and other parameters proved the structure’s higher load-bearing capacity with the CC layer. Based on the results, the Concrete Canvas structure provides higher reinforcement than the average geogrid type. Originality. The advantages of using new Concrete Canvas materials in the structure of a railway track have been demonstrated for the first time to provide greater internal shear resistance than the average for geogrids. Practical value. These results may provide primary data for using Concrete Canvas in railway tracks and superstructures in the future.
- 29 February 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 50-57
Advantages of using CONCRETE CANVAS materials in railway track construction
Purpose. Justification of the feasibility of using new types of drainage materials, such as Concrete Canvas (CC), under the upper structure of the railway permanent way. Methodology. The tasks were solved by a complex research method, including analysis and generalization of literary and patent sources, analytical, experimental studies, using computer and mathematical modeling methods. Tests were conducted with and without the CC layer in a multi-level shear box. After the shear test, the specimens were also tested for load-bearing capacity (E2, according to the Hungarian standard) and particle breakage. The contact surface between the bottom of the ballast and the CC was measured using a precision 3D laser scanner (GOM ATOS) and visualized graphically using AutoCAD software. Findings. Experimental testing of the vertical load during connection and analysis compared with the test results of geocomposite/geogrid structures, internal shear resistance, and other parameters proved the structure’s higher load-bearing capacity with the CC layer. Based on the results, the Concrete Canvas structure provides higher reinforcement than the average geogrid type. Originality. The advantages of using new Concrete Canvas materials in the structure of a railway track have been demonstrated for the first time to provide greater internal shear resistance than the average for geogrids. Practical value. These results may provide primary data for using Concrete Canvas in railway tracks and superstructures in the future.
- 29 February 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 58-68
Testing the fragmentation of railway ballast material by laboratory methods using Proctor compactor
The physical classification of crushed stone and gravel used in railway construction is based on their strength and endurance and is performed by a laboratory test method using a rotating drum or a mortar method. The values of fracture resistance calculated using the Los Angeles method and abrasion calculated using the Micro-Deval method show a corresponding correlation and require further investigation. Purpose. The development of a new method for measuring rock material fracture that is consistent with widely used standards while also being more comparable to real-world railway operating conditions. Certainly, both standard tests are essential for ensuring product homogeneity during production, so the new recommended method is only a supplement. Methodology. The Proctor device was used to induce so-called shock loads from above, similar to railway loading conditions. Unlike the standard method, the andesite material was placed in a standard cylinder in these tests. The samples were pre-screened and sorted; the specified weight was approximately 1,300 g, and the specified sizes of the individual particles were 6.3, 8.0 and 11.2 mm. Only prewashed and dried materials of NZ (fine crushed stone) or KZ (special crushed stone) from four different quarries (Tállya, Szob, Nógrádkövesd, Recsk) with different rock physics characteristics were considered. The Proctor compactor machine was used because of its calculable labor (19.86 J/impact) and the crushing effect of the calculable impacts (64, 128, 256 and 1,028 blows). Even after loading different numbers of impacts, homogeneous samples from different quarries were sieved to measure the masses of fragments per fraction. Findings. The set of measurements made it possible to establish a series of fragmentation and degradation curves for each of the three repeated measurements based on the composition of the material and the number of blows, which showed the degradation of samples with different physical and mechanical properties of the rock material and particle sizes. With an increasing number of impacts, the amount of crushed material in the sample increased, but the distribution of crushed material did not decrease evenly and proportionally as the number of impacts increased. Parameters and indices were also computed to identify various correlations (i. e., FV, d < 22.4, d < 0.5, d < 0.063 mm, CU, M ratio, ratio). Some of them (e. g., FV) needed to be changed, but they were predefined due to the nature of the tests. Originality. While many standard and alternative railway track ballast fragmentation test methods and measurement tools are available, this paper proposes a new laboratory method and demonstrates the specific measurement and application effectiveness. Practical value. In addition to standard tests that are already widely used, the new method for measuring the fractional composition of railway ballast can help simulate real-world operating conditions of a railroad track in the laboratory. This method will improve the safety of railway operations.
- 29 February 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 58-68
Testing the fragmentation of railway ballast material by laboratory methods using Proctor compactor
The physical classification of crushed stone and gravel used in railway construction is based on their strength and endurance and is performed by a laboratory test method using a rotating drum or a mortar method. The values of fracture resistance calculated using the Los Angeles method and abrasion calculated using the Micro-Deval method show a corresponding correlation and require further investigation. Purpose. The development of a new method for measuring rock material fracture that is consistent with widely used standards while also being more comparable to real-world railway operating conditions. Certainly, both standard tests are essential for ensuring product homogeneity during production, so the new recommended method is only a supplement. Methodology. The Proctor device was used to induce so-called shock loads from above, similar to railway loading conditions. Unlike the standard method, the andesite material was placed in a standard cylinder in these tests. The samples were pre-screened and sorted; the specified weight was approximately 1,300 g, and the specified sizes of the individual particles were 6.3, 8.0 and 11.2 mm. Only prewashed and dried materials of NZ (fine crushed stone) or KZ (special crushed stone) from four different quarries (Tállya, Szob, Nógrádkövesd, Recsk) with different rock physics characteristics were considered. The Proctor compactor machine was used because of its calculable labor (19.86 J/impact) and the crushing effect of the calculable impacts (64, 128, 256 and 1,028 blows). Even after loading different numbers of impacts, homogeneous samples from different quarries were sieved to measure the masses of fragments per fraction. Findings. The set of measurements made it possible to establish a series of fragmentation and degradation curves for each of the three repeated measurements based on the composition of the material and the number of blows, which showed the degradation of samples with different physical and mechanical properties of the rock material and particle sizes. With an increasing number of impacts, the amount of crushed material in the sample increased, but the distribution of crushed material did not decrease evenly and proportionally as the number of impacts increased. Parameters and indices were also computed to identify various correlations (i. e., FV, d < 22.4, d < 0.5, d < 0.063 mm, CU, M ratio, ratio). Some of them (e. g., FV) needed to be changed, but they were predefined due to the nature of the tests. Originality. While many standard and alternative railway track ballast fragmentation test methods and measurement tools are available, this paper proposes a new laboratory method and demonstrates the specific measurement and application effectiveness. Practical value. In addition to standard tests that are already widely used, the new method for measuring the fractional composition of railway ballast can help simulate real-world operating conditions of a railroad track in the laboratory. This method will improve the safety of railway operations.
- 30 April 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 2,p. 64-70
Inner shear resistance increasing effect of Concrete Canvas in ballasted railway tracks
Purpose. To prove that the GCCM (geosynthetic cementitious composite mat) – type Concrete Canvas (CC) – is an adequate supplementary layer on the top of the subgrade. As its drainage function is known, this article tries to prove the reinforcement possibility. This layer is relatively thin; nevertheless, it can behave like the geogrids. It is the main path to finding out the opportunity of the interlocking effect and its impact on the railway ballast’s inner shear resistance. Methodology. The laboratory measurements were performed in a multi-level shear box, which allows simulating the multi-level shift of the ballast layer. The tests were planned with and without the CC layer. After shearing, the samples were also tested for load-bearing capacity (E2; according to the Hungarian Standard) and particle breakage. On the other hand, the contact surface between the lowest part of the ballast and CC was also measured by a sophisticated 3D laser scanner (GOM ATOS) and graphically by AutoCAD software. Findings. After the results of the laboratory experiments are analyzed, the following parameters are calculated and determined: 1) the reinforcement ratio as the tangent of the inner shear resistance curves in the 5–15 mm horizontal shearing interval as well as the area under graphs by integration in the 0–40 mm interval; 2) the change in load-bearing capacity of the layer-structure with and without CC; 3) the amount of the cement particles; 4) the amount of the broken particles; 5) contact surface between the lowest layer of ballast and CC; 6) flatness of CC sheets after shearing. Based on the results, the Concrete Canvas provides significant reinforcement to the railway ballast. Originality. Any other type of measurement with Concrete Canvas in a multi-level shear box is unknown. The topic is unique. Practical value. In the future, these results may provide baseline data to verify the suitability of the Concrete Canvas in the railway sub- or superstructure for various types of transport.
- 30 April 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 2,p. 64-70
Inner shear resistance increasing effect of Concrete Canvas in ballasted railway tracks
Purpose. To prove that the GCCM (geosynthetic cementitious composite mat) – type Concrete Canvas (CC) – is an adequate supplementary layer on the top of the subgrade. As its drainage function is known, this article tries to prove the reinforcement possibility. This layer is relatively thin; nevertheless, it can behave like the geogrids. It is the main path to finding out the opportunity of the interlocking effect and its impact on the railway ballast’s inner shear resistance. Methodology. The laboratory measurements were performed in a multi-level shear box, which allows simulating the multi-level shift of the ballast layer. The tests were planned with and without the CC layer. After shearing, the samples were also tested for load-bearing capacity (E2; according to the Hungarian Standard) and particle breakage. On the other hand, the contact surface between the lowest part of the ballast and CC was also measured by a sophisticated 3D laser scanner (GOM ATOS) and graphically by AutoCAD software. Findings. After the results of the laboratory experiments are analyzed, the following parameters are calculated and determined: 1) the reinforcement ratio as the tangent of the inner shear resistance curves in the 5–15 mm horizontal shearing interval as well as the area under graphs by integration in the 0–40 mm interval; 2) the change in load-bearing capacity of the layer-structure with and without CC; 3) the amount of the cement particles; 4) the amount of the broken particles; 5) contact surface between the lowest layer of ballast and CC; 6) flatness of CC sheets after shearing. Based on the results, the Concrete Canvas provides significant reinforcement to the railway ballast. Originality. Any other type of measurement with Concrete Canvas in a multi-level shear box is unknown. The topic is unique. Practical value. In the future, these results may provide baseline data to verify the suitability of the Concrete Canvas in the railway sub- or superstructure for various types of transport.
- 28 February 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 74-79
Geometry variation of ballasted railway tracks due to weather conditions
Purpose. Investigate and establish the relationship between track geometry measurements and weather conditions to determine the parameters that influence the lifetime of railway tracks’ superstructure system. The study of ballasted beds of railway tracks is very important for operation and maintenance in case of main lines, industrial sidings and mine transport. Methodology. Determination of the annual load of the selected section based on the regulations. Compari of the track parameters measurements made by TrackScan 4.01 instrument in different seasons and temperatures. Among the parameters measured by the instrument, the track gauge, alignment, longitudinal level, and superelevation parameters are considered and analyzed in this article.Since the main lines’ traffic are permanently loaded with passenger and freight transport and the industrial sidings and mine tracks are used in the production process, the examinations can only be done on tramway tracks during the standstills at night. The results of these measurement on tramway tracks can help to understand the identify of railway tracks’ lifetime and can be used in mainlines, industrial and mining railway tracks. Findings. The change in the average values of selected track geometrical parameters is analyzed, considering the typical weather conditions. Based on the measurement and results, there is an evident connection between the evaluated results of track geometry measurements and the change in weather conditions. Originality. Finding the relationship between changes in track geometry values and weather conditions on the basis of an evaluation of track geometry measurements taken on average every third month. Practical value. The results can then be used as input data for determining the service life of the track superstructure in the case of tramways, mainlines, industrial and mining railway tracks.
- 28 February 2023
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 1,p. 74-79
Geometry variation of ballasted railway tracks due to weather conditions
Purpose. Investigate and establish the relationship between track geometry measurements and weather conditions to determine the parameters that influence the lifetime of railway tracks’ superstructure system. The study of ballasted beds of railway tracks is very important for operation and maintenance in case of main lines, industrial sidings and mine transport. Methodology. Determination of the annual load of the selected section based on the regulations. Compari of the track parameters measurements made by TrackScan 4.01 instrument in different seasons and temperatures. Among the parameters measured by the instrument, the track gauge, alignment, longitudinal level, and superelevation parameters are considered and analyzed in this article.Since the main lines’ traffic are permanently loaded with passenger and freight transport and the industrial sidings and mine tracks are used in the production process, the examinations can only be done on tramway tracks during the standstills at night. The results of these measurement on tramway tracks can help to understand the identify of railway tracks’ lifetime and can be used in mainlines, industrial and mining railway tracks. Findings. The change in the average values of selected track geometrical parameters is analyzed, considering the typical weather conditions. Based on the measurement and results, there is an evident connection between the evaluated results of track geometry measurements and the change in weather conditions. Originality. Finding the relationship between changes in track geometry values and weather conditions on the basis of an evaluation of track geometry measurements taken on average every third month. Practical value. The results can then be used as input data for determining the service life of the track superstructure in the case of tramways, mainlines, industrial and mining railway tracks.
- Open Access
- 10 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16565
Evolution of Rail Contact Fatigue on Crossing Nose Rail Based on Long Short-Term Memory
The share of rail transport in world transport continues to rise. As the number of trains increases, so does the load on the railway. The rails are in direct contact with the loaded wheels. Therefore, it is more easily damaged. In recent years, domestic and foreign scholars have conducted in-depth research on railway damage detection. As the weakest part of the track system, switches are more prone to damage. Assessing and predicting rail surface damage can improve the safety of rail operations and allow for proper planning and maintenance to reduce capital expenditure and increase operational efficiency. Under the premise that functional safety is paramount, predicting the service life of rails, especially turnouts, can significantly reduce costs and ensure the safety of railway transportation. This paper understands the evolution of contact fatigue on crossing noses through long-term observation and sampling of crossing noses in turnouts. The authors get images from new to damaged. After image preprocessing, MPI (Magnetic Particle Imaging) is divided into blocks containing local crack information. The obtained local texture information is used for regression prediction using machine-supervised learning and LSTM network (Long Short-Term Memory) methods. Finally, a technique capable of thoroughly evaluating the wear process of crossing noses is proposed.
- 10 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 16565
Open AccessEvolution of Rail Contact Fatigue on Crossing Nose Rail Based on Long Short-Term Memory
The share of rail transport in world transport continues to rise. As the number of trains increases, so does the load on the railway. The rails are in direct contact with the loaded wheels. Therefore, it is more easily damaged. In recent years, domestic and foreign scholars have conducted in-depth research on railway damage detection. As the weakest part of the track system, switches are more prone to damage. Assessing and predicting rail surface damage can improve the safety of rail operations and allow for proper planning and maintenance to reduce capital expenditure and increase operational efficiency. Under the premise that functional safety is paramount, predicting the service life of rails, especially turnouts, can significantly reduce costs and ensure the safety of railway transportation. This paper understands the evolution of contact fatigue on crossing noses through long-term observation and sampling of crossing noses in turnouts. The authors get images from new to damaged. After image preprocessing, MPI (Magnetic Particle Imaging) is divided into blocks containing local crack information. The obtained local texture information is used for regression prediction using machine-supervised learning and LSTM network (Long Short-Term Memory) methods. Finally, a technique capable of thoroughly evaluating the wear process of crossing noses is proposed.
- Open Access
Optical Rail Surface Crack Detection Method Based on Semantic Segmentation Replacement for Magnetic Particle Inspection
Railway damage detection is of great significance in ensuring railway safety. The cracks on the rail surface play a key role in studying the formation and development process of rail damage, predicting the occurrence of rail defects, and then improving the service life of the rail. However, due to the small shape of the cracks, the typical detection method is relatively complicated, and the speed is quite slow. Although traditional magnetic particle inspection technology is fairly accurate at detection, it is costly and inconvenient to carry and install, while also limiting the detection speed and affecting the system’s operation. In this paper, a semantic segmentation detection method is developed by using various collected rail surface crack data and deep learning through a neural network. By comparing the inspection of the same rail surface with magnetic particle inspection technology, only inexpensive cameras are used and the inspection speed is increased while maintaining relatively high accuracy. In addition, the method can achieve fast detection speeds if it is extended to be combined with high-frequency cameras. It is an economical, efficient, and environmentally friendly method for future rail surface detection.
Open AccessOptical Rail Surface Crack Detection Method Based on Semantic Segmentation Replacement for Magnetic Particle Inspection
Railway damage detection is of great significance in ensuring railway safety. The cracks on the rail surface play a key role in studying the formation and development process of rail damage, predicting the occurrence of rail defects, and then improving the service life of the rail. However, due to the small shape of the cracks, the typical detection method is relatively complicated, and the speed is quite slow. Although traditional magnetic particle inspection technology is fairly accurate at detection, it is costly and inconvenient to carry and install, while also limiting the detection speed and affecting the system’s operation. In this paper, a semantic segmentation detection method is developed by using various collected rail surface crack data and deep learning through a neural network. By comparing the inspection of the same rail surface with magnetic particle inspection technology, only inexpensive cameras are used and the inspection speed is increased while maintaining relatively high accuracy. In addition, the method can achieve fast detection speeds if it is extended to be combined with high-frequency cameras. It is an economical, efficient, and environmentally friendly method for future rail surface detection.
- Open Access
- 18 July 2022
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 10 (6) , 962-987
Studying the Relation of the Residual Stresses in the Ballast Layer to the Elastic Wave Propagation
During track construction or ballast bed maintenance, ballast layer compaction quality plays an essential role in the following track irregularity accumulation, its lifecycle, and maintenance costs. The ballast compaction process is characterized by its compaction and the accumulation of the stressed state. The elastic wave propagation methods are an effective way for the identification of the ballast bed compaction properties. The paper presents the theoretical and experimental studies of the ballast consolidation under the vibration loading of the sleeper. The practical laboratory study is given by the 1:2.5 scaled physical model of one sleeper and the corresponding ballast layer box. The measurements of ballast pressure and deformations under the vibration loading in the ballast layer and the photogrammetric recording of the ballast flow are carried out. The measurements demonstrate the accumulation of the residual stresses under the ballast layer. Furthermore, the measurements of elastic wave time of flight (ToF) using the shakers under the sleeper and acceleration sensors under the ballast show the substantial increase of the ToF velocities after the tamping process. Moreover, the distribution of the velocities along the sleeper is spatially inhomogeneous. The numeric simulation using the discrete element method (DEM) of the tamping and the testing processes proves the inhomogeneous wave propagation effect. The modeling shows that the main reason for the wave propagation inhomogeneity is the accumulated residual stress distribution and the minor one – the compaction density. Additionally, a method for identifying wave velocity spatial distribution is developed by wave tracing the inhomogeneous medium. The procedures allow ballast identification in the zones outside the shakers.
- 18 July 2022
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 10 (6) , 962-987
Open AccessStudying the Relation of the Residual Stresses in the Ballast Layer to the Elastic Wave Propagation
During track construction or ballast bed maintenance, ballast layer compaction quality plays an essential role in the following track irregularity accumulation, its lifecycle, and maintenance costs. The ballast compaction process is characterized by its compaction and the accumulation of the stressed state. The elastic wave propagation methods are an effective way for the identification of the ballast bed compaction properties. The paper presents the theoretical and experimental studies of the ballast consolidation under the vibration loading of the sleeper. The practical laboratory study is given by the 1:2.5 scaled physical model of one sleeper and the corresponding ballast layer box. The measurements of ballast pressure and deformations under the vibration loading in the ballast layer and the photogrammetric recording of the ballast flow are carried out. The measurements demonstrate the accumulation of the residual stresses under the ballast layer. Furthermore, the measurements of elastic wave time of flight (ToF) using the shakers under the sleeper and acceleration sensors under the ballast show the substantial increase of the ToF velocities after the tamping process. Moreover, the distribution of the velocities along the sleeper is spatially inhomogeneous. The numeric simulation using the discrete element method (DEM) of the tamping and the testing processes proves the inhomogeneous wave propagation effect. The modeling shows that the main reason for the wave propagation inhomogeneity is the accumulated residual stress distribution and the minor one – the compaction density. Additionally, a method for identifying wave velocity spatial distribution is developed by wave tracing the inhomogeneous medium. The procedures allow ballast identification in the zones outside the shakers.
- 1 February 2022
- Published by Elsevier in Hydrometallurgy
- Vol. 208, 105782
Kinetics and mechanism of hydrochloric acid leaching of rare earths from Bayan Obo slag and recovery of rare earth oxalate and high purity oxides
- 1 February 2022
- Published by Elsevier in Hydrometallurgy
- Vol. 208, 105782
Kinetics and mechanism of hydrochloric acid leaching of rare earths from Bayan Obo slag and recovery of rare earth oxalate and high purity oxides
- Open Access
- 11 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (14) , 7740
Mechanism of Sleeper–Ballast Dynamic Impact and Residual Settlements Accumulation in Zones with Unsupported Sleepers
Unsupported sleepers or void zones in ballasted tracks are one of the most recent and frequent track failures. The void failures have the property of intensive development that, without timely maintenance measures, can cause the appearance of cost-expensive local instabilities such as subgrade damages. The reason for the intensive void development lies in the mechanics of the sleeper and ballast bed interaction. The particularity of the interaction is a dynamic impact that occurs due to void closure. Additionally, void zones cause inhomogeneous ballast pressure distribution between the void zone and fully supported neighbour zones. The present paper is devoted to studying the mechanism of the sleeper–ballast dynamic impact in the void zone. The results of experimental in situ measurements of rail deflections showed the significant impact accelerations in the zone even for lightweight slow vehicles. A simple three-beam numerical model of track and rolling stock interaction has shown dynamic interaction similar to the experimental measurements. Moreover, the model shows that the sleeper accelerations are more than 3 times higher than the corresponding wheel accelerations and the impact point appears before the wheel enters the impact point. The analysis of ballast loadings shows the specific impact behaviour in combination with the quasistatic part that is different for void and neighbour zones, which are characterised by high ballast pre-stressed conditions. The analysis of void size influence demonstrates that the maximal impact loadings and maximal wheel and sleeper accelerations appear at a certain void depth, after which the values decrease. The ballast quasistatic loading analysis indicates an increase of more than 2 times in the ballast loading in neighbour zones for long voids and almost full quasistatic unloading for short-length voids. However, the used imitation model cannot explain the nature of the dynamic impact. The mechanism of the void impact is clearly explained by the analytic solution using a simple clamped beam. A simplified analytical expression of the void impact velocity shows that it is linearly related to the wheel speed and loading. The comparison to the numerically simulated impact velocities shows a good agreement and the existence of the void depth with the maximal impact. An estimation of the long-term influences for the cases of normal sleeper loading, high ballast pre-stress and quasistatic loading in the neighbour zones and high impact inside the void is performed.
- 11 July 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (14) , 7740
Open AccessMechanism of Sleeper–Ballast Dynamic Impact and Residual Settlements Accumulation in Zones with Unsupported Sleepers
Unsupported sleepers or void zones in ballasted tracks are one of the most recent and frequent track failures. The void failures have the property of intensive development that, without timely maintenance measures, can cause the appearance of cost-expensive local instabilities such as subgrade damages. The reason for the intensive void development lies in the mechanics of the sleeper and ballast bed interaction. The particularity of the interaction is a dynamic impact that occurs due to void closure. Additionally, void zones cause inhomogeneous ballast pressure distribution between the void zone and fully supported neighbour zones. The present paper is devoted to studying the mechanism of the sleeper–ballast dynamic impact in the void zone. The results of experimental in situ measurements of rail deflections showed the significant impact accelerations in the zone even for lightweight slow vehicles. A simple three-beam numerical model of track and rolling stock interaction has shown dynamic interaction similar to the experimental measurements. Moreover, the model shows that the sleeper accelerations are more than 3 times higher than the corresponding wheel accelerations and the impact point appears before the wheel enters the impact point. The analysis of ballast loadings shows the specific impact behaviour in combination with the quasistatic part that is different for void and neighbour zones, which are characterised by high ballast pre-stressed conditions. The analysis of void size influence demonstrates that the maximal impact loadings and maximal wheel and sleeper accelerations appear at a certain void depth, after which the values decrease. The ballast quasistatic loading analysis indicates an increase of more than 2 times in the ballast loading in neighbour zones for long voids and almost full quasistatic unloading for short-length voids. However, the used imitation model cannot explain the nature of the dynamic impact. The mechanism of the void impact is clearly explained by the analytic solution using a simple clamped beam. A simplified analytical expression of the void impact velocity shows that it is linearly related to the wheel speed and loading. The comparison to the numerically simulated impact velocities shows a good agreement and the existence of the void depth with the maximal impact. An estimation of the long-term influences for the cases of normal sleeper loading, high ballast pre-stress and quasistatic loading in the neighbour zones and high impact inside the void is performed.