Thongchai Rohitatisha Srinophakun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Thongchai Rohitatisha Srinophakun has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Chayut Sungsook
Interdisciplinary of Sustainable Energy and Resource Engineering, Faculty of Engineering, Kasetsart University, Bangkean Campus, Bangkok 10900, Thailand,National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), Pathumthani 12120, Thailand,Department of Chemical Engineering, Faculty of Engineering, Kasetsart University, Bangkean Campus, Bangkok 10900, Thailand
3 shared publicationsSanchai Kuboon
Interdisciplinary of Sustainable Energy and Resource Engineering, Faculty of Engineering, Kasetsart University, Bangkean Campus, Bangkok 10900, Thailand,National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), Pathumthani 12120, Thailand
3 shared publicationsThanasit Punkumsing
Interdisciplinary of Sustainable Energy and Resource Engineering, Faculty of Engineering, Kasetsart University, Bangkean Campus, Bangkok 10900, Thailand
3 shared publicationsWasawat Kraithong
Interdisciplinary of Sustainable Energy and Resource Engineering, Faculty of Engineering, Kasetsart University, Bangkean Campus, Bangkok 10900, Thailand,National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), Pathumthani 12120, Thailand
3 shared publications- Akira Yamaguchi
Department of Materials Science and Engineering, School of Materials and Chemical Technology, Institute of Science Tokyo, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8552, Japan
2 shared publications - Hiroaki Kaneko
Department of Materials Science and Engineering, Tokyo Institute of Technology, Tokyo 152-8550, Japan
2 shared publications
Latest Publications
- 1 January 2025
- Published by Kasetsart University Research and Development Institute in Agriculture and Natural Resources
- Vol. 59 (1) , 01
Simulation and experimental study of biocoal production via dry torrefaction of palm empty fruit bunch
- 1 January 2025
- Published by Kasetsart University Research and Development Institute in Agriculture and Natural Resources
- Vol. 59 (1) , 01
Simulation and experimental study of biocoal production via dry torrefaction of palm empty fruit bunch
- 1 January 2025
- Published by Kasetsart University Research and Development Institute in Agriculture and Natural Resources
- Vol. 59 (1) , 01
Simulation and experimental study of biocoal production via dry torrefaction of palm empty fruit bunch
- 1 January 2025
- Published by Kasetsart University Research and Development Institute in Agriculture and Natural Resources
- Vol. 59 (1) , 01
Simulation and experimental study of biocoal production via dry torrefaction of palm empty fruit bunch
- 1 January 2024
- Published by Engineered Science Publisher in Engineered Science
Implementation of Covariance Function to Improve Ant Colony Algorithm for Common Chemical Engineering Optimization
This paper developed an improved real-value ant colony optimization algorithm (IACOR).
- 1 January 2024
- Published by Engineered Science Publisher in Engineered Science
Implementation of Covariance Function to Improve Ant Colony Algorithm for Common Chemical Engineering Optimization
This paper developed an improved real-value ant colony optimization algorithm (IACOR).
- Open Access
Development of Photothermal Catalyst from Biomass Ash (Bagasse) for Hydrogen Production via Dry Reforming of Methane (DRM): An Experimental Study
Conventional hydrogen production, as an alternative energy resource, has relied on fossil fuels to produce hydrogen, releasing CO2 into the atmosphere. Hydrogen production via the dry forming of methane (DRM) process is a lucrative solution to utilize greenhouse gases, such as carbon dioxide and methane, by using them as raw materials in the DRM process. However, there are a few DRM processing issues, with one being the need to operate at a high temperature to gain high conversion of hydrogen, which is energy intensive. In this study, bagasse ash, which contains a high percentage of silicon dioxide, was designed and modified for catalytic support. Modification of silicon dioxide from bagasse ash was utilized as a waste material, and the performance of bagasse ash-derived catalysts interacting with light irradiation and reducing the amount of energy used in the DRM process was explored. The results showed that the performance of 3%Ni/SiO2 bagasse ash WI was higher than that of 3%Ni/SiO2 commercial SiO2 in terms of the hydrogen product yield, with hydrogen generation initiated in the reaction at 300 °C. Using the same synthesis method, the current results suggested that bagasse ash-derived catalysts had better performance than commercial SiO2-derived catalysts when exposed to an Hg-Xe lamp. This indicated that silicon dioxide from bagasse ash as a catalyst support could help improve the hydrogen yield while lowering the temperature in the DRM reaction, resulting in less energy consumption in hydrogen production.
Open AccessDevelopment of Photothermal Catalyst from Biomass Ash (Bagasse) for Hydrogen Production via Dry Reforming of Methane (DRM): An Experimental Study
Conventional hydrogen production, as an alternative energy resource, has relied on fossil fuels to produce hydrogen, releasing CO2 into the atmosphere. Hydrogen production via the dry forming of methane (DRM) process is a lucrative solution to utilize greenhouse gases, such as carbon dioxide and methane, by using them as raw materials in the DRM process. However, there are a few DRM processing issues, with one being the need to operate at a high temperature to gain high conversion of hydrogen, which is energy intensive. In this study, bagasse ash, which contains a high percentage of silicon dioxide, was designed and modified for catalytic support. Modification of silicon dioxide from bagasse ash was utilized as a waste material, and the performance of bagasse ash-derived catalysts interacting with light irradiation and reducing the amount of energy used in the DRM process was explored. The results showed that the performance of 3%Ni/SiO2 bagasse ash WI was higher than that of 3%Ni/SiO2 commercial SiO2 in terms of the hydrogen product yield, with hydrogen generation initiated in the reaction at 300 °C. Using the same synthesis method, the current results suggested that bagasse ash-derived catalysts had better performance than commercial SiO2-derived catalysts when exposed to an Hg-Xe lamp. This indicated that silicon dioxide from bagasse ash as a catalyst support could help improve the hydrogen yield while lowering the temperature in the DRM reaction, resulting in less energy consumption in hydrogen production.
- Open Access
- 2 May 2023
- Published by MDPI AG in Preprints.org
Development of Photothermal Catalyst from Biomass Ash (Bagasse) for Hydrogen Production via Dry Reforming of Methane (DRM): An Experimental Study.
Conventional hydrogen production, as an alternative energy resource, has relied on fossil fuels to produce hydrogen, releasing CO2 into the atmosphere. Hydrogen production via the dry forming of methane (DRM) process is a lucrative solution to utilize greenhouse gases, such as carbon dioxide and methane, by using them as raw materials in the DRM process. However, there are a few DRM processing issues, with one being the need to operate at a high temperature to gain high conversion of hydrogen, which is energy intensive. In this study, bagasse ash, which contains a high percentage of silicon dioxide, was designed and modified for catalytic support. Modification of silicon dioxide from bagasse ash was utilized as a waste material and the performance was explored of bagasse ash-derived catalysts interacting with light irradiation and reducing the amount of energy used in the DRM process. The results showed that the performance of 3%Ni/SiO2 bagasse ash WI was higher than that of 3%Ni/SiO2 commercial SiO2 in terms of the hydrogen product yield, with hydrogen generation initiated in the reaction at 300 °C. Using the same synthesis method, the current results suggested that bagasse ash-derived catalysts had better performance than commercial SiO2-derived catalysts when exposed to an Hg-Xe lamp. This indicated that silicon dioxide from bagasse ash as a catalyst support could help improve the hydrogen yield while lowering the temperature in the DRM reaction, resulting in less energy consumption in hydrogen production.
- 2 May 2023
- Published by MDPI AG in Preprints.org
Open AccessDevelopment of Photothermal Catalyst from Biomass Ash (Bagasse) for Hydrogen Production via Dry Reforming of Methane (DRM): An Experimental Study.
Conventional hydrogen production, as an alternative energy resource, has relied on fossil fuels to produce hydrogen, releasing CO2 into the atmosphere. Hydrogen production via the dry forming of methane (DRM) process is a lucrative solution to utilize greenhouse gases, such as carbon dioxide and methane, by using them as raw materials in the DRM process. However, there are a few DRM processing issues, with one being the need to operate at a high temperature to gain high conversion of hydrogen, which is energy intensive. In this study, bagasse ash, which contains a high percentage of silicon dioxide, was designed and modified for catalytic support. Modification of silicon dioxide from bagasse ash was utilized as a waste material and the performance was explored of bagasse ash-derived catalysts interacting with light irradiation and reducing the amount of energy used in the DRM process. The results showed that the performance of 3%Ni/SiO2 bagasse ash WI was higher than that of 3%Ni/SiO2 commercial SiO2 in terms of the hydrogen product yield, with hydrogen generation initiated in the reaction at 300 °C. Using the same synthesis method, the current results suggested that bagasse ash-derived catalysts had better performance than commercial SiO2-derived catalysts when exposed to an Hg-Xe lamp. This indicated that silicon dioxide from bagasse ash as a catalyst support could help improve the hydrogen yield while lowering the temperature in the DRM reaction, resulting in less energy consumption in hydrogen production.
- 28 December 2022
- Published by International Journal of Technology in International Journal of Technology
- Vol. 13 (8) , 1787-1795
Techno-economic Analysis of Bioethanol Production from Palm Oil Empty Fruit bunch
Bioethanol has become more attractive as an alternative to fossil-based fuel: a biofuel and fuel additive to gasoline. Therefore, people are interested in ethanol from a feedstock that does not compete with the food supply. Oil palm empty fruit bunch (EFB) are major biomass by-products from the palm oil industry. This study proposes commercial-scale bioethanol production from EFB of 99.5 wt.% at 10,000 L/day ethanol. This bioethanol production was formulated using the commercial simulator and divided into four stages: pre-treatment, Hydrolysis, fermentation, and purification. EFB is pretreated using hot water, hot-compressed water, and alkaline hydrogen peroxide approaches. Simultaneous Saccharification and fermentation are chosen to produce the target of ethanol. At optimum conditions, it can conclude that the ethanol production rate was 13,950 litter per day by using an empty fruit bunch of 47,208 kg per day. Finally, the economic feasibility is also evaluated under techno-economic analysis. From the economic perspective, the net present value (NPV), internal rate of return (IRR), and payback period (PBP) equate to 9.016 M USD, 15%, and seven years, respectively, based on 20 years of life and a total capital investment of 12.32 M USD. The results show that bioethanol production is profitable.
- 28 December 2022
- Published by International Journal of Technology in International Journal of Technology
- Vol. 13 (8) , 1787-1795
Techno-economic Analysis of Bioethanol Production from Palm Oil Empty Fruit bunch
Bioethanol has become more attractive as an alternative to fossil-based fuel: a biofuel and fuel additive to gasoline. Therefore, people are interested in ethanol from a feedstock that does not compete with the food supply. Oil palm empty fruit bunch (EFB) are major biomass by-products from the palm oil industry. This study proposes commercial-scale bioethanol production from EFB of 99.5 wt.% at 10,000 L/day ethanol. This bioethanol production was formulated using the commercial simulator and divided into four stages: pre-treatment, Hydrolysis, fermentation, and purification. EFB is pretreated using hot water, hot-compressed water, and alkaline hydrogen peroxide approaches. Simultaneous Saccharification and fermentation are chosen to produce the target of ethanol. At optimum conditions, it can conclude that the ethanol production rate was 13,950 litter per day by using an empty fruit bunch of 47,208 kg per day. Finally, the economic feasibility is also evaluated under techno-economic analysis. From the economic perspective, the net present value (NPV), internal rate of return (IRR), and payback period (PBP) equate to 9.016 M USD, 15%, and seven years, respectively, based on 20 years of life and a total capital investment of 12.32 M USD. The results show that bioethanol production is profitable.
- Open Access
Multi-objective atom search optimization of biodiesel production from palm empty fruit bunch pyrolysis
- Open Access
- 8 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4692
Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale
Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.
- 8 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (14) , 4692
Open AccessOptimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale
Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.
- Open Access
Real-Time Optimization of Pulp Mill Operations with Wood Moisture Content Variation
In tropical countries, such as Thailand, the variation of tree moisture content can be significant based on seasonal variations in rainfall. Pulp mill operation optimization accounting for wood moisture variation was used to determine optimal operation conditions and minimize production cost. The optimization models were built using empirical modeling techniques with simulated data from the IDEAS software package. Three case studies were performed. First, a base case of nominal annual operation at a fixed production rate was used to calculate production cost that varies with wood moisture content. The second case is annual optimization where production was allowed to vary monthly over an annual cycle to minimize production cost. For the third case, real-time optimization (RTO) was used to determine optimal production rate with the wood moisture content varying every 3 days. The rolling horizon approach was used to schedule production to keep inventory levels within bounds and with a penalty applied to deviations from the annual expected values of inventory. The advantage of RTO in accounting for moisture content variation was confirmed by annual production costs results simulated for 20 years. These results statistically demonstrated that the overall cost was reduced compared to the second case of monthly production targets.
Open AccessReal-Time Optimization of Pulp Mill Operations with Wood Moisture Content Variation
In tropical countries, such as Thailand, the variation of tree moisture content can be significant based on seasonal variations in rainfall. Pulp mill operation optimization accounting for wood moisture variation was used to determine optimal operation conditions and minimize production cost. The optimization models were built using empirical modeling techniques with simulated data from the IDEAS software package. Three case studies were performed. First, a base case of nominal annual operation at a fixed production rate was used to calculate production cost that varies with wood moisture content. The second case is annual optimization where production was allowed to vary monthly over an annual cycle to minimize production cost. For the third case, real-time optimization (RTO) was used to determine optimal production rate with the wood moisture content varying every 3 days. The rolling horizon approach was used to schedule production to keep inventory levels within bounds and with a penalty applied to deviations from the annual expected values of inventory. The advantage of RTO in accounting for moisture content variation was confirmed by annual production costs results simulated for 20 years. These results statistically demonstrated that the overall cost was reduced compared to the second case of monthly production targets.