Donghyun Ahn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Donghyun Ahn has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Jaehun Ahn
Pusan National University
3 shared publications - Yongjin Choi
Department of Civil and Environmental Engineering, Pusan National University, Busan 46241, Korea
3 shared publications - Tan Hung Nguyen
Nam Can Tho University
1 shared publication - Yunje Lee
Department of Civil and Environmental Engineering, Pusan National University, Geumjeong-Gu, Busan 46241, Korea
1 shared publication - Yunje Lee
Department of Civil and Environmental Engineering, Pusan National University, Busan 46241, Republic of Korea
1 shared publication
Latest Publications
- Open Access
Prediction Models Based on Regression and Artificial Neural Network for Moduli of Layers Constituted by Open-Graded Aggregates
The impermeable cover in urban area has been growing due to rapid urbanization, which prevents stormwater from being naturally infiltrated into the ground. There is a higher chance of flooding in urban area covered with conventional concretes and asphalts. The permeable pavement is one of Low-Impact Development (LID) technologies that can reduce surface runoff and water pollution by allowing stormwater into pavement systems. Unlike traditional pavements, permeable pavement bases employ open-graded aggregates (OGAs) with highly uniform particle sizes. There is very little information on the engineering properties of compacted OGAs. In this study, the moduli of open-graded aggregates under various compaction energies are investigated based on the Plate Load Test (PLT) and Light-Weight Deflectometer (LWD). Artificial Neural Network (ANN) and Linear Regression (LR) models are employed for estimation of the moduli of the aggregates based on the material type and level of compaction. Overall, the moduli from PLT and LWD steeply increase until the number of roller passes reaches 4, and they gradually increase until the number of roller passes becomes 8. A set of simple linear equations are proposed to evaluate the moduli of open-graded aggregates from PLT and LWD based on the material type and the number of roller passes.
Open AccessPrediction Models Based on Regression and Artificial Neural Network for Moduli of Layers Constituted by Open-Graded Aggregates
The impermeable cover in urban area has been growing due to rapid urbanization, which prevents stormwater from being naturally infiltrated into the ground. There is a higher chance of flooding in urban area covered with conventional concretes and asphalts. The permeable pavement is one of Low-Impact Development (LID) technologies that can reduce surface runoff and water pollution by allowing stormwater into pavement systems. Unlike traditional pavements, permeable pavement bases employ open-graded aggregates (OGAs) with highly uniform particle sizes. There is very little information on the engineering properties of compacted OGAs. In this study, the moduli of open-graded aggregates under various compaction energies are investigated based on the Plate Load Test (PLT) and Light-Weight Deflectometer (LWD). Artificial Neural Network (ANN) and Linear Regression (LR) models are employed for estimation of the moduli of the aggregates based on the material type and level of compaction. Overall, the moduli from PLT and LWD steeply increase until the number of roller passes reaches 4, and they gradually increase until the number of roller passes becomes 8. A set of simple linear equations are proposed to evaluate the moduli of open-graded aggregates from PLT and LWD based on the material type and the number of roller passes.
- Open Access
- 23 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2521
Compaction Quality Monitoring of Open-Graded Aggregates by Light Weight Deflectometer and Soil Stiffness Gauge
Open-graded aggregates (OGAs) are free-draining materials often used as the base layer of permeable pavements to allow the infiltration or drainage of stormwater. Despite their widespread use, the compaction quality of OGA base layers has not been specified properly. The currently used density-based compaction quality control (QC) has limitations; obtaining the field density and maximum dry density of OGAs by typical methods is challenging, due to their unique properties. To overcome these limitations, modulus-based compaction QC can be used as an alternative. In this study, five different OGAs were chosen and compacted into a specially built soil chamber to measure their densities. The light weight deflectometer (LWD) and the soil stiffness gauge (SSG) were used to evaluate the modulus of the compacted OGAs. The vibratory hammer compaction test was conducted to obtain the maximum dry density of the aggregates. Through these tests, the relationship between the modulus of the compacted aggregates and the relative density was obtained, and efforts to find a modulus range that ensures proper compaction were made. It was found that the LWD and SSG are valid and reliable devices for monitoring the modulus change of OGAs due to compaction.
- 23 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2521
Open AccessCompaction Quality Monitoring of Open-Graded Aggregates by Light Weight Deflectometer and Soil Stiffness Gauge
Open-graded aggregates (OGAs) are free-draining materials often used as the base layer of permeable pavements to allow the infiltration or drainage of stormwater. Despite their widespread use, the compaction quality of OGA base layers has not been specified properly. The currently used density-based compaction quality control (QC) has limitations; obtaining the field density and maximum dry density of OGAs by typical methods is challenging, due to their unique properties. To overcome these limitations, modulus-based compaction QC can be used as an alternative. In this study, five different OGAs were chosen and compacted into a specially built soil chamber to measure their densities. The light weight deflectometer (LWD) and the soil stiffness gauge (SSG) were used to evaluate the modulus of the compacted OGAs. The vibratory hammer compaction test was conducted to obtain the maximum dry density of the aggregates. Through these tests, the relationship between the modulus of the compacted aggregates and the relative density was obtained, and efforts to find a modulus range that ensures proper compaction were made. It was found that the LWD and SSG are valid and reliable devices for monitoring the modulus change of OGAs due to compaction.
- Open Access
- 22 October 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (10) , 3817
Assessment of Field Compaction of Aggregate Base Materials for Permeable Pavements Based on Plate Load Tests
The permeable pavement is one of Low Impact Development technics that allows stormwater to infiltrate through the pavement surface and the underlying base layer, thereby reducing surface runoff and preventing water contamination. For permeable base layers of permeable pavements, open-graded aggregates are often used to infiltrate and store stormwater in the pore of aggregate base layers. The mechanical behavior of open-graded aggregates has not been a major interest of pavement industry and society, and therefore there is much less information known for behavior of compacted open-graded aggregates comparing to dense-graded materials. This study aims at investigating the mechanical behavior of compacted permeable or open-graded aggregate base materials based on field experiments. Five different open-graded aggregates were selected, and they were compacted in the field up to 12 passes with a 10-ton vibratory compaction roller. The mechanical behaviors of aggregates were evaluated by conducting plate load tests at 2, 4, 8, and 12 passes of roller. For the test conditions considered herein, the strain modulus at the first loading seems to provide more consistent results with respect to aggregate types and level of compaction than other stiffness measures from plate load tests.
- 22 October 2018
- Published by MDPI AG in Sustainability
- Vol. 10 (10) , 3817
Open AccessAssessment of Field Compaction of Aggregate Base Materials for Permeable Pavements Based on Plate Load Tests
The permeable pavement is one of Low Impact Development technics that allows stormwater to infiltrate through the pavement surface and the underlying base layer, thereby reducing surface runoff and preventing water contamination. For permeable base layers of permeable pavements, open-graded aggregates are often used to infiltrate and store stormwater in the pore of aggregate base layers. The mechanical behavior of open-graded aggregates has not been a major interest of pavement industry and society, and therefore there is much less information known for behavior of compacted open-graded aggregates comparing to dense-graded materials. This study aims at investigating the mechanical behavior of compacted permeable or open-graded aggregate base materials based on field experiments. Five different open-graded aggregates were selected, and they were compacted in the field up to 12 passes with a 10-ton vibratory compaction roller. The mechanical behaviors of aggregates were evaluated by conducting plate load tests at 2, 4, 8, and 12 passes of roller. For the test conditions considered herein, the strain modulus at the first loading seems to provide more consistent results with respect to aggregate types and level of compaction than other stiffness measures from plate load tests.